Table 8 to Subpart UUU of Part 63 - Organic HAP Emission Limits for Catalytic Cracking Units  


Latest version.
  • Table 8 to Subpart UUU of Part 63 - Organic HAP Emission Limits for Catalytic Cracking Units

    As stated in § 63.1565(a)(1), you shall meet each emission limitation in the following table that applies to you.

    For each new and existing catalytic cracking unit . . . You shall meet the following emission limit for each catalyst
    regenerator vent . . .
    1. Subject to the NSPS for carbon monoxide (CO) in 40 CFR 60.103 or 60.102a(b)(4) CO emissions from the catalyst regenerator vent or CO boiler serving the catalytic cracking unit must not exceed 500 parts per million volume (ppmv) (dry basis).
    2. Not subject to the NSPS for CO in 40 CFR 60.103 or 60.102a(b)(4) a. CO emissions from the catalyst regenerator vent or CO boiler serving the catalytic cracking unit must not exceed 500 ppmv (dry basis).
    b. If you use a flare to meet the CO limit, then on and after January 30, 2019, the flare must meet the requirements of § 63.670. Prior to January 30, 2019, the flare must meet the requirements for control devices in § 63.11(b) and visible emissions must not exceed a total of 5 minutes during any 2 consecutive hours, or the flare must meet the requirements of § 63.670.

    [80 FR 75299, Dec. 1, 2015]