Table 11 to Subpart XXXX of Part 63 - Minimum Data for Continuous Compliance With the Emission Limits for Tire Cord Production Affected Sources  


Latest version.
  • Table 11 to Subpart XXXX of Part 63 - Minimum Data for Continuous Compliance With the Emission Limits for Tire Cord Production Affected Sources

    As stated in § 63.6005, you must maintain minimum data to show continuous compliance with the emission limits for tire cord production affected sources according to the following table:

    For . . . You must maintain . . .
    1. Sources complying with the monthly average alternative without using an add-on control device according to § 63.5987(a) that are meeting emission limits in Table 2 to this subpart a. A record of Method 311 (40 CFR part 63, appendix A), or approved alternative method, test results, indicating the mass percent of each HAP for coating used.
    b. The mass of each coating used each monthly operating period.
    c. The total mass of fabric processed each monthly operating period (if complying with the production-based option in Table 2 to this subpart, option 1).
    d. All data and calculations used to determine the monthly average mass percent for each HAP for each monthly operating period.
    e. Monthly averages of emissions in the appropriate emission emission limit format.
    2. Sources complying with the monthly average alternative using an add-on control device according to § 63.5987(b) that are meeting emission limits in Table 2 to this subpart a. The same information as sources complying with the monthly average alternative without using a control device.
    b. Records of operating parameter values for each operating parameter that applies to you.