§ 1036.225 - Amending applications for certification.  


Latest version.
  • § 1036.225 Amending my application applications for certification.

    Before we issue you a certificate of conformity, you may amend your application to include new or modified engine configurations, subject to the provisions of this section. After we have issued your certificate of conformity, you may send us an amended application any time before the end of the model year requesting that we include new or modified engine configurations within the scope of the certificate, subject to the provisions of this section. You must also amend your application if any changes occur with respect to any information that is included or should be included in your application.

    (a) You must amend your application before you take any of the following actions:

    (1) Add an engine configuration to an engine family. In this case, the engine configuration added must be consistent with other engine configurations in the engine family with respect to the

    criteria

    design aspects listed in § 1036.230.

    (2) Change an engine configuration already included in an engine family in a way that may affect emissions, or change any of the components you described in your application for certification. This includes production and design changes that may affect emissions any time during the engine's lifetime.

    (3) Modify an FEL

    and

    or FCL for an engine family as described in paragraph (f) of this section.

    (b) To amend your application for certification, send the relevant information to the Designated Compliance Officer.

    (1) Describe in detail the addition or change in the engine model or configuration you intend to make.

    (2) Include engineering evaluations or data showing that the amended engine family complies with all applicable requirements. You may do this by showing that the original emission-data engine is still appropriate for showing that the amended family complies with all applicable requirements.

    (3) If the original emission-data engine for the engine family is not appropriate to show compliance for the new or modified engine configuration, include new test data showing that the new or modified engine configuration meets the requirements of this part.

    (4) Include any other information needed to make your application correct and complete.

    (c) We may ask for more test data or engineering evaluations. You must give us these within 30 days after we request them.

    (d) For engine families already covered by a certificate of conformity, we will determine whether the existing certificate of conformity covers your newly added or modified engine. You may ask for a hearing if we deny your request (see § 1036.820).

    (e) The amended application applies starting with the date you submit the amended application, as follows:

    (1) For engine families already covered by a certificate of conformity, you may start producing a new or modified engine configuration any time after you send us your amended application and before we make a decision under paragraph (d) of this section. However, if we determine that the affected engines do not meet applicable requirements in this part, we will notify you to cease production of the engines and may require you to recall the engines at no expense to the owner. Choosing to produce engines under this paragraph (e) is deemed to be consent to recall all engines that we determine do not meet applicable emission standards or other requirements in this part and to remedy the nonconformity at no expense to the owner. If you do not provide information required under paragraph (c) of this section within 30 days after we request it, you must stop producing the new or modified engines.

    (2) [Reserved]

    (f) You may ask us to approve a change to your FEL in certain cases after the start of production, but before the end of the model year. If you change an FEL for CO2, your FCL for CO2 is automatically set to your new FEL divided by 1.03. The changed FEL may not apply to engines you have already introduced into U.S. commerce, except as described in this paragraph (f). You may ask us to approve a change to your FEL in the following cases:

    (1) You may ask to raise your FEL for your engine family at any time. In your request, you must show that you will still be able to meet the emission standards as specified in subparts B and H of this part. Use the appropriate FELs/FCLs with corresponding production volumes to calculate emission credits for the model year, as described in subpart H of this part.

    (

    1

    2) You may ask to

    raise your

    lower the FEL for your engine family

    at any time before the end of the model year. In your request, you must show that you will still be able to meet the emission standards as specified in subparts B and H of this part. Use the appropriate FELs/FCLs

    only if you have test data from production engines showing that emissions are below the proposed lower FEL (or below the proposed FCL for CO2). The lower FEL/FCL applies only to engines you produce after we approve the new FEL/FCL. Use the appropriate FEL/FCL with corresponding production volumes to calculate emission credits for the model year, as described in subpart H of this part.

    (g) You may produce engines

    as described in your amended application for certification and consider those engines to be in a certified configuration if we approve a new

    or

    modified engine configuration during the model year under paragraph (d) of this section. Similarly, you may

    modify in-use engines as described in your amended application for certification and consider those engines to be in a certified configuration

    if we approve a new or modified engine configuration at any time under paragraph (d) of this section

    . Modifying a new or in-use engine to be in a certified configuration does not violate the tampering prohibition of 40 CFR 1068.101(b)(1), as long as this does not involve changing to a certified configuration with a higher family emission limit.

    [81 FR 74011, Oct. 25, 2016, as amended at 86 FR 34378, June 29, 2021]