§ 260.11 - Incorporation by reference.


Latest version.
  • § 260.11 Incorporation by reference.

    (a)

    When used in parts 260 through 268

    and 278

    of this chapter, the following

    publications

    materials are incorporated by reference

    . These incorporations by reference were approved by the

    with the approval of the Director of the Federal Register

    pursuant to

    under 5 U.S.C. 552(a) and 1 CFR part 51.

    These

    All approved materials are

    incorporated as they exist on the date of approval and a notice of any change in these materials will be published in the Federal Register. Copies may be inspected at the Library, U.S. Environmental Protection Agency, 1200 Pennsylvania Ave., NW. (3403T), Washington, DC 20460, libraryhq@epa.gov; or

    available for inspection at the OLEM Docket in the Environmental Protection Agency Docket Center (EPA/DC), West William Jefferson Clinton Bldg., Rm. 3334, 1301 Constitution Ave. NW, Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading room is (202) 566-1744, and the telephone number for the OLEM Docket is (202) 566-0270. These approved materials are also available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA,

    call 202-741-6030,

    email fedreg.legal@nara.gov or go to

    : http://

    www.archives.gov/federal

    _

    -register/

    code_of_federal_regulations

    cfr/ibr

    _

    -locations.html.

    (b) The following

    In addition, these materials are available

    for purchase

    from the

    American Society for Testing and Materials,

    following sources:

    (a) American Petroleum Institute (API). 1220 L Street Northwest, Washington, DC 20005, (855) 999-9870, www.api.org.

    (1) API Publication 2517, Third Edition, February 1989, “Evaporative Loss from External Floating-Roof Tanks,” IBR approved for § 265.1084.

    (2) [Reserved]

    (b) ASTM International (ASTM). 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959, (877) 909-ASTM, www.astm.org.

    (1) ASTM DD93-93-79 or D-9379, “Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester,” IBR approved for § 261.21(a).

    (2) ASTM D93-80, “Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester,” IBR approved for § 261.21(a).

    (

    2

    3) ASTM

    D

    D1946-

    1946-

    82, “Standard Method for Analysis of Reformed Gas by Gas Chromatography,” IBR approved for §§ 264.1033

    ,

    and 265.1033.

    (

    3

    4) ASTM

    D 2267

    D2267-88, “Standard Test Method for Aromatics in Light Naphthas and Aviation Gasolines by Gas Chromatography,” IBR approved for § 264.1063.

    (

    4

    5) ASTM

    D 2382

    D2382-83, “Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method),” IBR approved for §§ 264.1033

    ,

    and 265.1033.

    (

    5

    6) ASTM

    D 2879

    D2879-92, “Standard Test Method for Vapor Pressure - Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope,” IBR approved for § 265.1084.

    (

    6

    7) ASTM

    D

    D3278-

    3278-

    78, “Standard Test Methods for Flash Point for Liquids by Setaflash Closed Tester,” IBR approved for § 261.21(a).

    (

    7

    8) ASTM

    E 168-

    D8174-18 “Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small Scale Closed Cup Tester.” Approved March 15, 2018, IBR approved for § 261.21(a).

    (9) ASTM D8175-18 “Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester.” Approved March 15, 2018, IBR approved for § 261.21(a).

    (10) ASTM E168-88, “Standard Practices for General Techniques of Infrared Quantitative Analysis,” IBR approved for § 264.1063.

    (

    8

    11) ASTM

    E 169

    E169-87, “Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis,” IBR approved for § 264.1063.

    (

    9

    12) ASTM

    E 260

    E260-85, “Standard Practice for Packed Column Gas Chromatography,” IBR approved for § 264.1063.

    (

    10

    13) ASTM

    E 926

    E681-

    88,

    85 “Standard Test

    Methods for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals,” Test Method C - Bomb, Acid Digestion Method.
    (c) The following materials are available for purchase from the

    Method for Concentration Limits of Flammability of Chemicals (Vapors and gases),” Approved November 14, 1985, IBR approved for § 261.21(a).

    (c) Environmental Protection Agency (EPA). Material cited in paragraphs (d)(1) through (3) is available from: National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161; or for purchase from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, (202) 512-1800; EPA's National Service Center for Environmental Publications at https://www.epa.gov/nscep. Material cited in paragraph (d)(4) of this section is available at https://www.epa.gov/hw-sw846.

    (1) “APTI Course 415: Control of Gaseous Emissions,” EPA Publication EPA-450/2-81-005, December 1981, IBR approved for §§ 264.1035 and 265.1035.

    (2) Method 1664, n-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel Treated n-Hexane Extractable Material SGT-HEM; Non-polar Material) by Extraction and Gravimetry:

    (i) Revision A, EPA-821-R-98-002, February 1999, IBR approved for Part 261, Appendix IXappendix IX to part 261.

    (ii) Revision B, EPA-821-R-10-001, February 2010, IBR approved for Part 261, Appendix IX.

    (3

    appendix IX to part 261.

    (3) “Screening Procedures for Estimating the Air Quality Impact of Stationary Sources, Revised”, October 1992, EPA Publication No. EPA-450/R-92-019, IBR approved for appendix IX to part 266.

    (4) The following methods as published in the test methods compendium known as “Test Methods for Evaluating Solid Waste, Physical/Chemical Methods,” EPA Publication SW-846, Third Edition.

    A suffix of “A” in the method number indicates revision one

    (

    the method has been revised once). A suffix of “B” in the method number indicates revision two (the method has been revised twice). A suffix of “C” in the method number indicates revision three (the method has been revised three times). A suffix of “D” in the method number indicates revision four (the method has been revised four times). (

    i) Method 0010,

    dated September 1986 and in the Basic Manual

    Modified Method 5 Sampling Train, Revision 1, dated August 2018, IBR approved for appendix IX to part 261

    , appendix IX

    .

    (ii) Method

    0020, dated September 1986 and in the Basic Manual, IBR approved for part 261, appendix IX.

    0011, Sampling for Selected Aldehyde and Ketone Emissions from Stationary Sources, Revision 1, dated August 2018, IBR approved for appendix IX to part 261 and appendix IX to part 266

    (iii) Method

    0030, dated September 1986 and in the Basic Manual

    0020, Source Assessment Sampling System (SASS), Revision 1, dated August 2018, IBR approved for appendix IX to part 261

    , appendix IX

    .

    (iv) Method

    1320, dated September 1986 and in the Basic Manual, IBR approved for part 261, appendix IX

    0023A, Sampling Method for Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofuran Emissions from Stationary Sources, Revision 2, dated August 2018, IBR approved for appendix IX to part 261, § 266.104(e), and appendix IX to part 266.

    (v) Method

    1311

    0030, Volatile Organic Sampling Train, dated September

    1992

    1986 and in

    Update I

    the Basic Manual, IBR approved for

    part 261,

    appendix IX

    , and §§

    to part 261.

    24, 268.7, 268.40.

    (vi) Method

    1330A, dated September 1992

    0031, Sampling Method for Volatile Organic Compounds (SMVOC), dated December 1996 and in Update

    I

    III, IBR approved for appendix IX to part 261

    , appendix IX

    .

    (vii) Method

    1312 dated September 1994

    0040, Sampling of Principal Organic Hazardous Constituents from Combustion Sources Using Tedlar® Bags, dated December 1996 and in Update III, IBR approved for appendix IX to part 261

    , appendix IX and § 278

    .

    3

    (

    b)(1). (

    viii) Method

    0011,

    0050, Isokinetic HCl/Cl2 Emission Sampling Train, dated December 1996 and in Update III, IBR approved for appendix IX to part 261, § 266.107, and appendix IX

    , and

    to part 266

    , appendix IX

    .

    (ix) Method

    0023A, dated December 1996 and in Update III

    0051, Midget Impinger HCl/Cl2 Emission Sampling Train, Revision 1, dated August 2018, IBR approved for appendix IX to part 261,

    appendix IX, part 266, appendix IX, and § 266.104.

    § 266.107, and appendix IX to part 266.

    (x) Method

    0031,

    0060, Determination of Metals in Stack Emissions, dated December 1996 and in Update III, IBR approved for appendix IX to part 261, § 266.106, and appendix IX to part 266.

    (xi) Method

    0040,

    0061, Determination of Hexavalent Chromium Emissions from Stationary Sources, dated December 1996 and in Update III, IBR approved for appendix IX to part 261 § 266.106, and appendix IX to part 266.

    (xii) Method

    0050, dated December 1996 and in Update III

    1010B, Test Methods for Flash Point by Pensky-Martens Closed-Cup Tester, dated December 2018, IBR approved for

    part ,

    .21 and appendix IX

    , part 266, appendix IX, and § 266.107.

    to part 261.

    (xiii) Method

    0051, dated December 1996 and in Update III

    1020C, Standard Test Methods for Flash Point by Setaflash (Small Scale) Closed-Cup Apparatus, dated December 2018, IBR approved for

    part ,

    .21 and appendix IX

    , part 266, appendix IX, and § 266.107.

    to part 261.

    (xiv) Method

    0060

    1110A,

    dated December 1996

    Corrosivity Toward Steel, dated November 2004 and in Update

    III

    IIIB, IBR approved for

    part 261, appendix IX, § 266.106, and part 266, appendix IX

    § 261.22 and appendix IX to part 261.

    (xv) Method

    0061, dated December 1996

    1310B, Extraction Procedure (EP) Toxicity Test Method and Structural Integrity Test, dated November 2004 and in Update

    III

    IIIB, IBR approved for

    part 261,

    appendix IX

    , § 266.106, and part 266, appendix IX

    to part 261.

    (xvi) Method

    9071B

    1311,

    dated April 1998

    Toxicity Characteristic Leaching Procedure, dated July 1992 and in Update

    IIIA

    I, IBR approved for appendix IX to part 261,

    appendix IX.

    (xvii) Method

    1010A

    1312,

    dated November 2004

    Synthetic Precipitation Leaching Procedure, dated September 1994 and in Update

    IIIB

    III, IBR approved for appendix IX to part 261

    , appendix IX

    .

    (xviii) Method

    1020B

    1320,

    dated November 2004 and in Update IIIB

    Multiple Extraction Procedure, dated September 1986 and in the Basic Manual, IBR approved for appendix IX to part 261

    , appendix IX

    .

    (xix) Method

    1110A, dated November 2004

    1330A, Extraction Procedure for Oily Wastes, dated July 1992 and in Update

    IIIB

    I, IBR approved for

    § 261.22 and

    appendix IX to part 261

    , appendix IX

    .

    (xx) Method

    1310B,

    9010C, Total and Amenable Cyanide: Distillation, dated November 2004 and in Update IIIB, IBR approved for

    part 261, appendix IX. (xxi) Method 9010C, dated November 2004 and in Update IIIB, IBR approved for part 261, appendix IX

    appendix IX to part 261 and §§ 268.40, 268.44, 268.48.

    (

    xxii

    xxi) Method 9012B, Total and Amenable Cyanide (Automated Colorimetric, with Off-Line Distillation), dated November 2004 and in Update IIIB, IBR approved for appendix IX to part 261

    , appendix IX xxiii

    xxii) Method 9040C, pH Electrometric Measurement, dated November 2004 and in Update IIIB, IBR approved for appendix IX to part 261

    , appendix IX

    and § 261.22.

    (

    xxiv

    xxiii) Method 9045D, Soil and Waste pH, dated November 2004 and in Update IIIB, IBR approved for appendix IX to part 261

    , appendix IX

    .

    (

    xxv

    xxiv) Method 9060A, Total Organic Carbon, dated November 2004 and in Update IIIB, IBR approved for appendix IX to part 261,

    appendix IX, xxvi

    xxv) Method 9070A, n-Hexane Extractable material (HEM) for Aqueous Samples, dated November 2004 and in Update IIIB, IBR approved for appendix IX to part 261.

    (xxvi) Method 9071B, n-Hexane Extractable Material (HEM) for Sludge, Sediment, and Solid Samples, dated April 1998 and in Update IIIA, IBR approved for appendix IX to part 261.

    (xxvii) Method 9095B, Paint Filter Liquids Test, dated November 2004 and in Update IIIB, IBR approved, appendix IX to part 261,

    appendix IX,

    (d) The following materials are available for purchase from the National Fire Protection Association , (NFPA). 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101, (800) 344-3555, www.nfpa.org/.

    (1) NFPA 30, “Flammable and Combustible Liquids Code” (NFPA 30)Code,1977 or 1981Edition, IBR approved for §§ 262.16(b), 264.198(b), 265.198(b), and 267.202(b).

    (2) [Reserved]

    (e) The following materials are available for purchase from the American Petroleum Institute, 1220 L Street, Northwest, Washington, DC 20005.

    (1) API Publication 2517, Third Edition, February 1989, “Evaporative Loss from External Floating-Roof Tanks,” IBR approved for § 265.1084.

    (2) [Reserved]

    (f) The following materials are available for purchase from the Environmental Protection Agency, Research Triangle Park, NC.

    (1) “Screening Procedures for Estimating the Air Quality Impact of Stationary Sources, Revised”, October 1992, EPA Publication No. EPA-450/R-92-019, IBR approved for part 266, appendix IX.

    (2) [Reserved]

    (g) The following materials are available for purchase from the

    NFPA 30, “Flammable and Combustible Liquids Code,” 1981 Edition, IBR approved for §§ 262.16(b), 264.198(b), 265.198(b), and 267.202(b).

    (e) Organization for Economic Cooperation and Development (OECD). Economic Cooperation and Development, Environment Directorate, 2 rue André Pascal, F-75775 Paris Cedex 16, France, owww.oecd-ilibrary.org/.

    (1) Guidance Manual for the Control of Transboundary Movements of Recoverable Wastes, copyright 2009, Annex B: OECD Consolidated List of Wastes Subject to the Green Control Procedure and Annex C: OECD Consolidated List of Wastes Subject to the Amber Control Procedure, IBR approved for §§ 262.82(a), 262.83(b), (d), and (g), and 262.84(b) and (d)

    of this chapter

    .

    (2) [Reserved]

    [70 85 FR 34560, June 14, 2005, as amended at 70 FR 53453, Sept. 8, 2005; 70 FR 59575, Oct. 12, 2005; 72 FR 39352, July 18, 2007; 77 FR 29834, May 18, 2012; 81 FR 85713, 85806, Nov. 28, 201640606, July 7, 2020]