§ 266.410 - USFRS XL Waste Transport and Transportation Tracking Document.

A USFRS XL Transportation Tracking Document and USFRS XL Waste MSDS will accompany every shipment of USFRS XL waste from a USFRS XL waste generator off-site. Each resin canister and filter container will have the warning statement required by §§ 266.408(c) and 266.409 affixed to it. USFRS, and the USFRS XL waste generator and transporter shall comply with the following requirements:

(a) USFRS. USFRS will require each USFRS XL waste generator to contact USFRS to arrange for the transportation of the USFRS XL waste. USFRS will contact and use only USFRS XL waste transporters to transport the USFRS XL waste. USFRS will require that the USFRS XL waste transporter pick up the generator's USFRS XL waste prior to the expiration of the storage time limit provided to the generator pursuant to § 266.408. USFRS will complete and send to the USFRS XL waste generator the USFRS XL waste Transportation Tracking Document and warning statement identified in §§ 266.408(c) and 266.409. USFRS will ensure that the generator receives these documents by the time the transporter arrives at the generator. USFRS will include on the Transportation Tracking Document all information EPA determines is required to comply with this subpart O. USFRS will direct the USFRS XL waste transporter to ship the USFRS XL waste to its facility at 2430 Rose Place, Roseville, Minnesota within 30 days of its pick-up from a USFRS XL waste generator. If a shipment is not received within 30 days, USFRS will contact the transporter to determine the disposition of the load. If USFRS does not receive the shipment within 5 days of its scheduled arrival date, it will notify EPA, MPCA, the USFRS XL generator and as appropriate the County Agencies. USFRS will send a copy of the Transportation Tracking Document to the USFRS XL waste generator within 10 days of USFRS' receipt of the XL001 waste from the transporter.

(b) USFRS XL waste generators. A USFRS XL waste generator must contact USFRS for the off-site transport, treatment, storage or disposal of USFRS XL wastes. A USFRS waste generator will use only a USFRS XL waste transporter to transport the USFRS XL waste to the USFRS Roseville, Minnesota facility located at 2430 Rose Place. It must verify the accuracy of the USFRS XL Waste Transportation Tracking Document and warning statement, make any corrections to them that are necessary and sign the Transportation Tracking Document. It must affix the warning statement to each resin canister and filter container and provide a copy of the USFRS XL Waste Transportation Tracking Document and USFRS XL waste MSDS to the USFRS XL waste transporter at the time it provides the transporter with the USFRS XL waste.

(c) USFRS XL waste transporter. A USFRS XL waste transporter shall verify the accuracy of the information contained on the USFRS XL Waste Transportation Tracking Document and on the warning statement. It shall sign and date the USFRS Transportation Tracking Document for each shipment of USFRS XL waste it transports and carry it with each shipment that it carries. It shall carry the USFRS XL waste MSDS with each shipment. It shall pick up each shipment of USFRS XL waste prior to the expiration of the storage time limit provided the generator pursuant to § 266.408. It shall deliver each shipment of USFRS XL waste to the USFRS Roseville, Minnesota facility located at 2430 Rose Place within 30 days of it being picked-up at a USFRS XL waste generator. A USFRS transporter may store USFRS XL waste for no more than 10 days at a transfer facility without being subject to regulation under 40 CFR parts 264, 265, 268 and 270 for the storage of those wastes.