![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 40 - Protection of Environment |
![]() |
Chapter I - Environmental Protection Agency |
![]() |
SubChapter N - Effluent Guidelines and Standards |
![]() |
Part 421 - Nonferrous Metals Manufacturing Point Source Category |
![]() |
Subpart AB - Primary and Secondary Titanium Subcategory |
§ 421.302 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
-
§ 421.302 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable technology currently available:
(a) Chlorination off-gas wet air pollution control.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.412 0.168 Lead 0.393 0.187 Nickel 1.797 1.189 Titanium 0.880 0.384 Oil and grease 18.720 11.230 Total suspended solids 38.380 18.250 pH (1) (1) (b) Chlorination area-vent wet air pollution control.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 produced Chromium (total) 0.412 0.168 Chromium (total) 0.458 0.187 Lead 0.437 0.208 Nickel 1.997 1.321 Titanium 0.978 0.426 Oil and grease 20.800 12.480 Total suspended solids 42.640 20.280 pH (1) (1) (c) TiCl4 handling wet air pollution control.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of TiCl4 handled Chromium (total) 0.082 0.034 Lead 0.079 0.037 Nickel 0.359 0.237 Titanium 0.176 0.077 Oil and grease 3.740 2.244 Total suspended solids 7.667 3.647 pH (1) (1) (d) Reduction area wet air pollution control.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of titanium produced Chromium (total) 18.170 7.435 Lead 17.350 8.261 Nickel 79.300 52.450 Titanium 38.820 16.930 Oil and grease 826.100 495.600 Total suspended solids 1,693.000 805.400 pH (1) (1) (e) Melt cell wet air pollution control.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of titanium produced Chromium (total) 9.352 3.826 Lead 8.927 4.251 Nickel 40.810 26.990 Titanium 19.980 8.714 Oil and grease 425.100 255.000 Total suspended solids 871.400 414.500 pH (1) (1) (f) Chlorine liquefaction wet air pollution control.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of titanium produced Chromium (total) 130.900 53.560 Lead 125.000 59.510 Nickel 571.300 377.900 Titanium 279.700 122.000 Oil and grease 5,951.000 3,571.000 Total suspended solids 12,200.000 5,702.000 pH (1) (1) (g) Sodium reduction container reconditioning wash water.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of titanium produced Chromium (total) 0.564 0.231 Lead 0.538 0.256 Nickel 2.461 1.628 Titanium 1.205 0.526 Oil and grease 25.640 15.380 Total suspended solids 52.560 25.000 pH (1) (1) (h) Chip crushing wet air pollution control.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of titanium produced Chromium (total) 10.090 4.126 Lead 9.627 4.584 Nickel 44.010 29.110 Titanium 21.550 9.398 Oil and grease 458.400 275.100 Total suspended solids 939.800 447.000 pH (1) (1) (i) Acid leachate and rinse water.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of titanium produced Chromium (total) 5.210 2.131 Lead 4.973 2.368 Nickel 22.730 15.040 Titanium 11.130 4.854 Oil and grease 236.800 142.100 Total suspended solids 485.400 230.900 pH (1) (1) (j) Sponge crushing and screening wet air pollution control.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of titanium produced Chromium (total) 2.847 1.165 Lead 2.717 1.294 Nickel 12.420 8.217 Titanium 6.082 2.653 Oil and grease 129.400 77.640 Total suspended solids 265.300 126.200 pH (1) (1) (k) Acid pickle and wash water.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of titanium pickled Chromium (total) 0.027 0.011 Lead 0.026 0.012 Nickel 0.117 0.077 Titanium 0.057 0.025 Oil and grease 1.220 0.732 Total suspended solids 2.501 1.190 pH (1) (1) (l) Scrap milling wet air pollution control.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of scrap milled Chromium (total) 0.995 0.407 Lead 0.950 0.452 Nickel 4.341 2.871 Titanium 2.125 0.927 Oil and grease 45.220 27.130 Total suspended solids 92.700 44.090 pH (1) (1) (m) Scrap detergent wash water.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of scrap washed Chromium (total) 7.948 3.252 Lead 7.587 3.613 Nickel 34.680 22.940 Titanium 16.980 7.406 Oil and grease 361.300 216.800 Total suspended solids 740.600 352.300 pH (1) (1) (n) Casting crucible wash water.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of titanium cast Chromium (total) 0.210 0.086 Lead 0.200 0.095 Nickel 0.916 0.606 Titanium 0.448 0.196 Oil and grease 9.540 5.724 Total suspended solids 19.560 9.302 pH (1) (1) (o) Casting contact cooling water.
BPT Limitations for the Primary and Secondary Titanium Subcategory
Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average mg/kg (pounds per million pounds) of titanium cast Chromium (total) 321.100 131.400 Lead 306.500 145.900 Nickel 1,401.000 926.800 Titanium 685.900 299.200 Oil and grease 14,590.000 8,757.000 Total suspended solids 29,920.000 14,230.000 pH (1) (1)