Code of Federal Regulations (Last Updated: July 5, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter N - Effluent Guidelines and Standards |
Part 428 - Rubber Manufacturing Point Source Category |
Subpart I - Pan, Dry Digestion, and Mechanical Reclaimed Rubber Subcategory |
§ 428.93 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
-
§ 428.93 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:
Effluent characteristic Effluent limitations Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed - Metric units (kg/kkg of product) Oil and grease 0.40 0.144 TSS 0.384 0.192 pH (1) (1) English units (lb/1,000 lb of product) Oil and grease 0.40 0.144 TSS 0.384 0.192 pH (1) (1) (b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to pan, dry digestion, and mechanical reclaimed rubber processes which are integrated with a wet digestion reclaimed rubber process, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable in addition to the limitations set forth by § 428.93(a):
Effluent characteristic Effluent limitations Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed - Metric units (kg/kkg of product) COD 6.7 2.8 English units (lb/1,000 lb of product) COD 6.7 2.8