 |
Code of Federal Regulations (Last Updated: May 6, 2024) |
 |
Title 40 - Protection of Environment |
|
Chapter I - Environmental Protection Agency |
|
SubChapter N - Effluent Guidelines and Standards |
|
Part 430 - The Pulp, Paper, and Paperboard Point Source Category |
|
Subpart J - Secondary Fiber Non-Deink Subcategory |
§ 430.106 - Pretreatment standards for existing sources (PSES).
-
§ 430.106 Pretreatment standards for existing sources (PSES).
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart that introduces pollutants into a publicly owned treatment works must: Comply with 40 CFR part 403; and achieve the following pretreatment standards for existing sources (PSES) if it uses chlorophenolic-containing biocides. Permittees not using chlorophenolic-containing biocides must certify to the permit-issuing authority that they are not using these biocides. PSES must be attained on or before July 1, 1984:
Subpart J
[PSES for secondary fiber non-deink facilities where paperboard from wastepaper is produced]
Pollutant or pollutant property Maximum for any 1 day Milligrams/liter (mg/l) Kg/kkg (or pounds per 1,000 lb) of producta Pentachlorophenol (0.032)(7.2)/y 0.00096 Trichlorophenol (0.010)(7.2)/y 0.00030 y = wastewater discharged in kgal per ton of product. Subpart J
[PSES for secondary fiber non-deink facilities where builders' paper and roofing felt from wastepaper are produced]
Pollutant or pollutant property Maximum for any 1 day Milligrams/liter (mg/l) Kg/kkg (or pounds per 1,000 lb) of producta Pentachlorophenol (0.032)(14.4)y 0.0019 Trichlorophenol (0.010)(14.4)y 0.00060 y = wastewater discharged in kgal per ton of product. Subpart J
[PSES for secondary fiber non-deink facilities where tissue from wastepaper is produced without deinking]
Pollutant or pollutant property Maximum for any 1 day Milligrams/liter (mg/l) Kg/kkg (or pounds per 1,000 lb) of producta Pentachlorophenol (0.032)(25.2)y 0.0034 Trichlorophenol (0.010)(25.2)/y 0.0011 y = wastewater discharged in kgal per ton of product. Subpart J
[PSES for secondary fiber non-deink facilities where molded products from wastepaper are produced without deinking]
Pollutant or pollutant property Maximum for any 1 day Milligrams/liter (mg/l) Kg/kkg (or pounds per 1,000 lb) of producta Pentachlorophenol (0.032)(21.1)y 0.0028 Trichlorophenol (0.010)(21.1)y 0.00088 y = wastewater discharged in kgal per ton of product.