Code of Federal Regulations (Last Updated: July 5, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter N - Effluent Guidelines and Standards |
Part 467 - Aluminum Forming Point Source Category |
Subpart F - Drawing With Emulsions or Soaps Subcategory |
§ 467.65 - Pretreatment standards for existing sources.
-
§ 467.65 Pretreatment standards for existing sources.
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources. The mass of wastewater pollutants in aluminum forming process wastewater introduced into a POTW shall not exceed the values set forth below:
Subpart F
Core
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum drawn with emulsions or soaps Chromium 0.205 0.084 Cyanide 0.135 0.056 Zinc 0.681 0.285 TTO 0.32 Oil and grease (alternate monitoring parameter) 25 12 Subpart F
Continuous Rod Casting Lubricant
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rod cast Chromium 0.0009 0.0004 Cyanide 0.0006 0.0003 Zinc 0.0029 0.0012 TTO 0.0014 Oil and grease (alternate monitoring parameter) 0.10 0.052 Subpart F
Continuous Rod Casting Contact Cooling Water
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthly average mg/off-kg (lb/million off-lbs) of aluminum rod cast Chromium 0.086 0.035 Cyanide 0.056 0.024 Zinc 0.283 0.119 TTO 0.134 Oil and grease (alternate monitoring parameter 10 5.1 Subpart F
Solution Heat Treatment Contact Cooling Water
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthy average mg/off-kg (lb/million off-lbs) of aluminum quenched Chromium 0.896 0.367 Cyanide 0.591 0.245 Zinc 2.98 1.25 TTO 1.41 Oil and grease (alternate monitoring parameter) 110 53 Subpart F
Cleaning or Etching Bath
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthy average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium 0.079 0.032 Cyanide 0.052 0.022 Zinc 0.262 0.11 TTO 0.124 Oil and grease (alternate monitoring parameter) 9.3 4.7 Subpart F
Cleaning or Etching Rinse
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthy average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium 0.612 0.251 Cyanide 0.404 0.167 Zinc 2.03 0.849 TTO 0.96 Oil and grease (alternate monitoring parameter) 73 36 Subpart F
Cleaning or Etching Scrubber Liquor
Pollutant or pollutant property PSES Maximum for any 1 day Maximum for monthy average mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched Chromium 0.851 0.348 Cyanide 0.561 0.232 Zinc 2.82 1.18 TTO 1.33 Oil and grease (alternate monitoring parameter) 100 50 [48 FR 49149, Oct. 24, 1983; 49 FR 11632, 11636, Mar. 27, 1984, as amended at 53 FR 52369, Dec. 27, 1988]