Subpart F - Procedures for Testing Performance Characteristics of Class II Equivalent Methods for PM 2.5


§ 53.60 - General provisions.
§ 53.61 - Test conditions.
§ 53.62 - Test procedure: Full wind tunnel test.
§ 53.63 - Test procedure: Wind tunnel inlet aspiration test.
§ 53.64 - Test procedure: Static fractionator test.
§ 53.65 - Test procedure: Loading test.
§ 53.66 - Test procedure: Volatility test.
Table F-1 to Subpart F - Performance Specifications for PM2.5 Class II Equivalent Samplers
Table F-2 to Subpart F - Particle Sizes and Wind Speeds for Full Wind Tunnel Test, Wind Tunnel Inlet Aspiration Test, and Static Chamber Test
Table F-3 to Subpart F - Critical Parameters of Idealized Ambient Particle Size Distributions
Figure E-1 to Subpart F - Designation Testing Checklist
Appendix A to Subpart F - References
Table F-1 to Subpart F of Part 53 - Performance Specifications for PM 2.5 Class II Equivalent Samplers
Table F-2 to Subpart F of Part 53 - Particle Sizes and Wind Speeds for Full Wind Tunnel Test, Wind Tunnel Inlet Aspiration Test, and Static Chamber Test
Table F-3 to Subpart F of Part 53 - Critical Parameters of Idealized Ambient Particle Size Distributions
Table F-4 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM 2.5 for Idealized Coarse Aerosol Size Distribution
Table F-5 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM 2.5 for Idealized “Typical” Coarse Aerosol Size Distribution
Table F-6 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM 2.5 for Idealized Fine Aerosol Size Distribution
Figure E-1 to Subpart F of Part 53 - Designation Testing Checklist
Figure F-1 to Subpart F of Part 53 - Designation Testing Checklist
Appendix A to Subpart F of Part 53 - References