Operator Training and Qualification

§ 60.4810 - What are the operator training and qualification requirements?

§ 60.4815 - When must the operator training course be completed?

§ 60.4820 - How do I obtain my operator qualification?

§ 60.4825 - How do I maintain my operator qualification?

§ 60.4830 - How do I renew my lapsed operator qualification?

§ 60.4835 - What if all the qualified operators are temporarily not accessible?

§ 60.4840 - What site-specific documentation is required and how often must it be reviewed by qualified operators and plant personnel?

Emission Limits, Emission Standards, and Operating Limits and Requirements

§ 60.4845 - What emission limits and standards must I meet and by when?

§ 60.4850 - What operating limits and requirements must I meet and by when?

§ 60.4855 - How do I establish operating limits if I do not use a wet scrubber, fabric filter, electrostatic precipitator, or activated carbon injection, or if I limit emissions in some other manner, to comply with the emission limits?

§ 60.4860 - Do the emission limits, emission standards, and operating limits apply during periods of startup, shutdown, and malfunction?

§ 60.4861 - How do I establish an affirmative defense for exceedance of an emission limit or standard during malfunction?

Recordkeeping and Reporting

§ 60.4910 - What records must I keep?

§ 60.4915 - What reports must I submit?

Title V Operating Permits

§ 60.4920 - Am I required to apply for and obtain a title V operating permit for my unit?

§ 60.4925 - When must I submit a title V permit application for my new SSI unit?

Definitions

§ 60.4930 - What definitions must I know?

Continuous Compliance Requirements

§ 60.4885 - How and when do I demonstrate continuous compliance with the emission limits and standards?

§ 60.4890 - How do I demonstrate continuous compliance with my operating limits?

§ 60.4895 - By what date must I conduct annual air pollution control device inspections and make any necessary repairs?

Initial Compliance Requirements

§ 60.4865 - How and when do I demonstrate initial compliance with the emission limits and standards?

§ 60.4870 - How do I establish my operating limits?

§ 60.4875 - By what date must I conduct the initial air pollution control device inspection and make any necessary repairs?

§ 60.4880 - How do I develop a site-specific monitoring plan for my continuous monitoring, bag leak detection, and ash handling systems, and by what date must I conduct an initial performance evaluation?

Introduction

§ 60.4760 - What does this subpart do?

§ 60.4765 - When does this subpart become effective?

Performance Testing, Monitoring, and Calibration Requirements

§ 60.4900 - What are the performance testing, monitoring, and calibration requirements for compliance with the emission limits and standards?

§ 60.4905 - What are the monitoring and calibration requirements for compliance with my operating limits?

Preconstruction Siting Analysis

§ 60.4800 - Who must prepare a siting analysis?

§ 60.4805 - What is a siting analysis?

Applicability and Delegation of Authority

§ 60.4770 - Does this subpart apply to my sewage sludge incineration unit?

§ 60.4775 - What is a new sewage sludge incineration unit?

§ 60.4780 - What sewage sludge incineration units are exempt from this subpart?

§ 60.4785 - Who implements and enforces this subpart?

§ 60.4790 - How are these new source performance standards structured?

§ 60.4795 - Do all nine components of these new source performance standards apply at the same time?

Table 1 to Subpart LLLL of Part 60 - Emission Limits and Standards for New Fluidized Bed Sewage Sludge Incineration Units

Table 2 to Subpart LLLL of Part 60 - Emission Limits and Standards for New Multiple Hearth Sewage Sludge Incineration Units

Table 3 to Subpart LLLL of Part 60 - Operating Parameters for New Sewage Sludge Incineration Units a

Table 4 to Subpart LLLL of Part 60 - Toxic Equivalency Factors

Table 5 to Subpart LLLL of Part 60 - Summary of Reporting Requirements for New Sewage Sludge Incineration Units a