Code of Federal Regulations (Last Updated: May 6, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter C - Air Programs |
Part 63 - National Emission Standards for Hazardous Air Pollutants for Source Categories |
Subpart ZZZZZ - National Emission Standards for Hazardous Air Pollutants for Iron and Steel Foundries Area Sources |
Requirements for New and Existing Affected Sources Classified as Large Iron and Steel Foundries |
§ 63.10900 - What parts of the General Provisions apply to my large foundry?
Latest version.
-
§ 63.10900 What parts of the General Provisions apply to my large foundry?
(a) If you own or operate a new or existing affected source that is classified as a large foundry, you must comply with the requirements of the General Provisions (40 CFR part 63, subpart A) according to Table 3 of this subpart.
(b) If you own or operator a new or existing affected source that is classified as a large foundry, your notification of compliance status required by § 63.9(h) must include each applicable certification of compliance, signed by a responsible official, in Table 4 of this subpart.