§ 63.11504 - Am I subject to this subpart?  


Latest version.
  • § 63.11504 Am I subject to this subpart?

    (a) You are subject to this subpart if you own or operate a plating and polishing facility that is an area source of hazardous air pollutant (HAP) emissions and meets the criteria specified in paragraphs (a)(1) through (3) of this section.

    (1) A plating and polishing facility is a plant site that is engaged in one or more of the processes listed in paragraphs (a)(1)(i) through (vi) of this section.

    (i) Electroplating other than chromium electroplating (i.e., non-chromium electroplating).

    (ii) Electroless or non-eletrolytic plating.

    (iii) Other non-electrolytic metal coating processes, such as chromate conversion coating, nickel acetate sealing, sodium dichromate sealing, and manganese phosphate coating; and thermal spraying.

    (iv) Dry mechanical polishing of finished metals and formed products after plating or thermal spraying.

    (v) Electroforming.

    (vi) Electropolishing.

    (2) A plating or polishing facility is an area source of HAP emissions, where an area source is any stationary source or group of stationary sources within a contiguous area under common control that does not have the potential to emit any single HAP at a rate of 9.07 megagrams per year (Mg/yr) (10 tons per year (tpy)) or more and any combination of HAP at a rate of 22.68 Mg/yr (25 tpy) or more.

    (3) Your plating and polishing facility uses or has emissions of compounds of one or more plating and polishing metal HAP, which means any compound of any of the following metals: cadmium, chromium, lead, manganese, and nickel, as defined in § 63.11511, “What definitions apply to this subpart?” With the exception of lead, plating and polishing metal HAP also include any of these metals in the elemental form.

    (b) [Reserved]

    [73 FR 37741, July 1, 2008, as amended at 76 FR 57919, Sept. 19, 2011]