§ 63.9633 - How do I monitor and collect data to demonstrate continuous compliance?  


Latest version.
  • § 63.9633 How do I monitor and collect data to demonstrate continuous compliance?

    (a) Except for monitoring malfunctions, out of control periods, associated repairs, and required quality assurance or control activities (including as applicable, calibration checks and required zero and span adjustments), you must monitor continuously (or collect data at all required intervals) at all times an affected source is operating.

    (b) You may not use data recorded during monitoring malfunctions, out of control periods, associated repairs, and required quality assurance or control activities in data averages and calculations used to report emission or operating levels, or to fulfill a minimum data availability requirement. You must use all the data collected during all other periods in assessing compliance.

    (c) A monitoring malfunction is any sudden, infrequent, not reasonably preventable failure of the monitoring system to provide valid data. Monitoring failures that are caused in part by poor maintenance or careless operation are not considered malfunctions.

    [68 FR 61888, Oct. 30, 2003, as amended at 85 FR 45496, July 28, 2020]