 |
Code of Federal Regulations (Last Updated: November 8, 2024) |
 |
Title 40 - Protection of Environment |
|
|
Chapter I - Environmental Protection Agency |
|
|
SubChapter C - Air Programs |
|
|
Part 63 - National Emission Standards for Hazardous Air Pollutants for Source Categories |
|
|
Subpart TTTT - National Emission Standards for Hazardous Air Pollutants for Leather Finishing Operations |
Subpart TTTT - National Emission Standards for Hazardous Air Pollutants for Leather Finishing Operations
| Notifications, Reports, and Records |
| § 63.5415 - What notifications must I submit and when? |
| § 63.5420 - What reports must I submit and when? |
| § 63.5425 - When must I start recordkeeping to determine my compliance ratio? |
| § 63.5430 - What records must I keep? |
| § 63.5435 - In what form and how long must I keep my records? |
| What This Subpart Covers |
| § 63.5280 - What is the purpose of this subpart? |
| § 63.5285 - Am I subject to this subpart? |
| § 63.5290 - What parts of my facility does this subpart cover? |
| § 63.5295 - When do I have to comply with this subpart? |
| Other Requirements and Information |
| § 63.5450 - What parts of the General Provisions apply to me? |
| § 63.5455 - Who administers this subpart? |
| § 63.5460 - What definitions apply to this subpart? |
| Standards |
| § 63.5305 - What emission standards must I meet? |
| Compliance Requirements |
| § 63.5320 - How does my affected major source comply with the HAP emission standards? |
| § 63.5325 - What is a plan for demonstrating compliance and when must I have one in place? |
| § 63.5330 - How do I determine the compliance ratio? |
| § 63.5335 - How do I determine the actual HAP loss? |
| § 63.5340 - How do I determine the allowable HAP loss? |
| § 63.5345 - How do I distinguish between the two upholstery product process operations? |
| § 63.5350 - How do I distinguish between the water-resistant/specialty and nonwater-resistant leather product process operations? |
| § 63.5355 - How do I monitor and collect data to demonstrate continuous compliance? |
| § 63.5360 - How do I demonstrate continuous compliance with the emission standards? |
| Testing and Initial Compliance Requirements |
| § 63.5375 - When must I conduct a performance test or initial compliance demonstration? |
| § 63.5380 - How do I conduct performance tests? |
| § 63.5385 - How do I measure the quantity of finish applied to the leather? |
| § 63.5390 - How do I measure the HAP content of a finish? |
| § 63.5395 - How do I measure the density of a finish? |
| § 63.5400 - How do I measure the quantity of leather processed? |
| Table 1 to Subpart TTTT of Part 63 - Leather Finishing HAP Emission Limits for Determining the Allowable HAP Loss |
| Table 2 to Subpart TTTT of Part 63 - Applicability of General Provisions to Subpart TTTT |
| Figure 1 to Subpart TTTT of Part 63 - Example Logs for Recording Leather Finish Use and HAP Content |
| Tables to Subpart TTTT of Part 63 |