 |
Code of Federal Regulations (Last Updated: July 5, 2024) |
 |
Title 40 - Protection of Environment |
|
Chapter I—Environmental Protection Agency |
|
SubChapter C—Air Programs |
|
Part 80 - Regulation of Fuels and Fuel Additives |
|
Subpart M - Renewable Fuel Standard |
§ 80.1468 - [Reserved]
-
§ 80.1468 Incorporation by reference.
(a) Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. All approved incorporation by reference (IBR) material is available for inspection at U.S. EPA and at the National Archives and Records Administration (NARA). Contact U.S. EPA at: U.S. EPA, Air and Radiation Docket and Information Center, WJC West Building, Room 3334, 1301 Constitution Ave. NW, Washington, DC 20460; (202) 566–1742. For information on the availability of this material at NARA, email fr.inspection@nara.gov, or go to www.archives.gov/federal-register/cfr/ibr-locations.html. The material may be obtained from the source(s) in the following paragraph(s) of this section.
[87 FR 39673, July 1, 2022(b) ASTM International, 100 Barr Harbor Dr., P.O. Box C700, West Conshohocken, PA 19428–2959; (877) 909–2786; www.astm.org.
(1) ASTM D975–21, Standard Specification for Diesel Fuel, approved August 1, 2021 (“ASTM D975”); IBR approved for §§ 80.1401; 80.1426(f); 80.1450(b); 80.1451(b); 80.1454(l).
(2) ASTM D1250–19e1, Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1, approved May 1, 2019 (“ASTM D1250”); IBR approved for § 80.1426(f).
(3) ASTM D4442–20, Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials, approved March 1, 2020 (“ASTM D4442”); IBR approved for § 80.1426(f).
(4) ASTM D4444–13 (Reapproved 2018), Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters, reapproved July 1, 2018 (“ASTM D4444”); IBR approved for § 80.1426(f).
(5) ASTM D6751–20a, Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels, approved August 1, 2020 (“ASTM D6751”); IBR approved for § 80.1401.
(6) ASTM D6866–22, Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis, approved March 15, 2022 (“ASTM D6866”); IBR approved for §§ 80.1426(f); 80.1430(e).
(7) ASTM E711–87 (R2004), Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter, reapproved 2004 (“ASTM E711”); IBR approved for § 80.1426(f).
(8) ASTM E870–82 (Reapproved 2019), Standard Test Methods for Analysis of Wood Fuels, reapproved April 1, 2019 (“ASTM E870”); IBR approved for § 80.1426(f).
[Reserved]