Code of Federal Regulations (Last Updated: November 8, 2024) |
Title 40 - Protection of Environment |
Chapter I - Environmental Protection Agency |
SubChapter C - Air Programs |
Part 86 - Control of Emissions from New and in-Use Highway Vehicles and Engines |
Subpart A - General Provisions for Heavy-Duty Engines and Heavy-Duty Vehicles |
§ 86.000-23 - Required data.
-
Section 86.000-23 includes text that specifies requirements that differ from § 86.095-23 or § 86.098-23. Where a paragraph in § 86.095-23 or § 86.098-23 is identical and applicable to § 86.000-23, this may be indicated by specifying the corresponding paragraph and the statement “[Reserved]. For guidance see § 86.095-23.” or “[Reserved]. For guidance see § 86.098-23.”
(a)-(b)(1)(ii) [Reserved]. For guidance see § 86.095-23.
(b)(2) [Reserved]. For guidance see § 86.098-23.
(b)(3)-(b)(4)(ii) [Reserved]. For guidance see § 86.095-23.
(b)(4)(iii) [Reserved]. For guidance see § 86.098-23.
(c)-(e)(1) [Reserved]. For guidance see § 86.095-23.
(e)(2)-(e)(3) [Reserved]. For guidance see § 86.098-23.
(f)-(k) [Reserved]. For guidance see § 86.095-23.
(l) Additionally, manufacturers certifying vehicles shall submit for each model year 2000 through 2002 light-duty vehicle and light light-duty truck engine family and each model year 2002 through 2004 heavy light-duty truck engine family the information listed in paragraphs (l) (1) and (2) of this section.
(1) Application for certification. In the application for certification, the manufacturer shall submit the projected sales volume of engine families certifying to the respective standards. Volume projected to be produced for U.S. sale may be used in lieu of projected U.S. sales.
(2) End-of-year reports for each engine family.
(i) These end-of-year reports shall be submitted within 90 days of the end of the model year to: Director, Vehicle Programs and Compliance Division, U.S. Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460.
(ii) These reports shall indicate the model year, engine family, and the actual U.S. sales volume. The manufacturer may petition the Administrator to allow volume produced for U.S. sale to be used in lieu of U.S. sales. Such petition shall be submitted within 30 days of the end of the model year to the Manufacturers Operations Division. For the petition to be granted, the manufacturer must establish to the satisfaction of the Administrator that production volume is functionally equivalent to sales volume.
(iii) The U.S. sales volume for end-of-year reports shall be based on the location of the point of sale to a dealer, distributor, fleet operator, broker, or any other entity which comprises the point of first sale.
(iv) Failure by a manufacturer to submit the end-of-year report within the specified time may result in certificate(s) for the engine family(ies) certified to Tier 1 certification standards being voided ab initio plus any applicable civil penalties for failure to submit the required information to the Agency.
(v) These reports shall include the information required under § 86.000-
7(h)(1). The information shall be organized in such a way as to allow the Administrator to determine compliance with the SFTP standards implementation schedules of §§ 86.000-8 and 86.000-9. (m) [Reserved]. For guidance see § 86.098-23.