Subpart F - Emission Regulations for 1978 and Later New Motorcycles; Test Procedures  


§ 86.530-78 - Test sequence, general requirements.
§ 86.540-90 - Exhaust sample analysis.
§ 86.513 - Fuel and engine lubricant specifications.
§ 86.501-78 - Applicability.
§ 86.531-78 - Vehicle preparation.
§ 86.511-90 - Exhaust gas analytical system.
§ 86.521-90 - Hydrocarbon analyzer calibration.
§ 86.502-78 - Definitions.
§ 86.522-78 - Carbon monoxide analyzer calibration.
§ 86.532-78 - Vehicle preconditioning.
§ 86.542-90 - Records required.
§ 86.503-78 - Abbreviations.
§ 86.523-78 - Oxides of nitrogen analyzer calibration.
§ 86.513-87 - Fuel and engine lubricant specifications.
§ 86.513-90 - Fuel and engine lubricant specifications.
§ 86.513-94 - Fuel and engine lubricant specifications.
§ 86.513-2004 - Fuel and engine lubricant specifications.
§ 86.504-78 - Section numbering.
§ 86.514-78 - Analytical gases.
§ 86.524-78 - Carbon dioxide analyzer calibration.
§ 86.544-90 - Calculations; exhaust emissions.
§ 86.505-78 - Introduction; structure of subpart.
§ 86.515-78 - EPA urban dynamometer driving schedule.
§ 86.535-90 - Dynamometer procedure.
§§ 86.545--86.599 - [Reserved]
§ 86.505-2004 - Introduction; structure of subpart.
§ 86.536-78 - Engine starting and restarting.
§ 86.516-90 - Calibrations, frequency and overview.
§ 86.526-90 - Calibration of other equipment.
§ 86.527-90 - Test procedures, overview.
§ 86.537-90 - Dynamometer test runs.
§ 86.508-78 - Dynamometer.
§ 86.518-78 - Dynamometer calibration.
§ 86.528-78 - Transmissions.
§ 86.519-78 - Constant volume sampler calibration.
§ 86.529-78 - Road load force and inertia weight determination.
§ 86.509-90 - Exhaust gas sampling system.
§ 86.519-90 - Constant volume sampler calibration.
§ 86.529-98 - Road load force and inertia weight determination.