§ 101-45.309-12 - Vehicle reconditioning.

(a) For the purpose of this section, vehicle reconditioning means restoring or improving the appearance of any motorized passenger or cargo vehicle designed primarily for highway use that is to be disposed of through surplus or exchange/sale procedures to the general public.

(b) To produce the maximum net proceeds, holding agencies shall determine, prior to sale, the appropriate level of reconditioning commensurate with the estimated fair market value of each vehicle scheduled for sale.

(c) Holding agencies shall arrange for the reconditioning to be accomplished just prior to the dates scheduled for public inspection and sale.

(d) For all motor vehicles above salvage condition or value, the minimum level of reconditioning required is as follows:

(1) Driver and passenger compartment. (i) Remove debris; (ii) vacuum floors and seats; (iii) clean dashboard, instrument panel, armrests, door panels, and rear shelf; (iv) remove Government stickers or decals without marring surface; (v) clean ashtrays and glove compartment; and (vi) wash windows.

(2) Trunk. (i) Remove debris; (ii) vacuum; and (iii) position spare tire and tools.

(3) Engine compartment. (i) Remove debris; (ii) replenish lubricants and coolant to required levels and replace missing caps/covers; and (iii) charge battery, if necessary.

(4) Exterior. (i) Remove Government stickers or decals without marring paint finish; (ii) wash exterior, including glass, door jambs, tires, and wheel rims/covers; and (iii) inflate tires to recommended pressure.

(e) Additional reconditioning of selected motor vehicles should be considered when such action is expected to substantially improve the return on the sale of a vehicle. Generally, a return of $2.00 for each dollar invested should be estimated to justify additional reconditioning. Additional reconditioning should include some or all of the following:

(1) Driver and passenger compartment. (i) Shampoo seats, dashboard, headliner, door panels, and floor covering; (ii) spray-dye floor carpets and mats; (iii) polish where appropriate; (iv) apply vinyl/rubber reconditioners where appropriate; and (v) replace missing knobs, nameplates, and light lenses and/or bulbs.

(2) Trunk. (i) Wash interior surface; and (ii) Spray-dye mats.

(3) Engine compartment. (i) Clean major surface areas (air cleaner cover, battery, etc.); (ii) wash or steam clean, when necessary; (iii) replace air and fuel filters; and (iv) make minor adjustments and/or replacements to engine systems (electrical, fuel, cooling, etc.) to ensure that the vehicle will start and idle correctly during inspection by prospective purchasers.

(4) Exterior. (i) Rotate tires, including the spare, to ensure that the best tires are displayed on the vehicle. Properly inflate, clean, and apply rubber conditioner or black tire paint to all tires; (ii) wash and blacken wheel splash shields; (iii) apply touch-up paint to nicks and scratches; (iv) wax and polish; (v) replace missing or damaged molding, nameplates, lenses, caps, mirrors, antennas, and wheel covers; (vi) repaint exterior of vehicle to original factory color if scrapes, dings, etc., are excessive; (vii) repair minor body damage; (viii) apply decorative molding and/or striping to add eye appeal; and (ix) obtain State safety and/or emission control inspections, if required.

(f) Reconditioning, when possible, should be accomplished no earlier than the calendar week prior to the scheduled sale date.

(g) Agencies should contact the nearest GSA Federal Supply Service Bureau office for information regarding the availability of reconditioning services.

(h) The expense of reconditioning is the responsibility of the holding agency.