![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 46 - Shipping |
![]() |
Chapter I - Coast Guard, Department of Homeland Security |
![]() |
SubChapter Q - Equipment, Construction, and Materials: Specifications and Approval |
![]() |
Part 160 - Lifesaving Equipment |
![]() |
Subpart 160.056 - Rescue Boat |
§ 160.056-2 - Construction.
-
§ 160.056-2 Construction.
(a) General. Rescue boats shall be square-sterned, of normal proportions, not less than 11 feet nor more than 14 feet in length. The length shall be the overall horizontal distance from bow to stern.
(b) Construction. The method of construction shall be such as is accepted as good engineering practice in the case of the specific material used. The hull shall be suitably stiffened to assure adequate strength.
(c) Weight. The weight of the rescue boat, fully equipped, shall not exceed 225 pounds.
(d) Seats. The rescue boat shall be fitted with three thwarts. The middle thwart shall be arranged as the rowing seat.
(e) Internal buoyancy. Buoyant material of suitable unicellular plastic foam shall be installed in the rescue boat. This material shall be protected from mechanical damage. It shall be distributed uniformly in the boat and such that at least one-quarter of the required volume is located at the sides of the boat. The minimum amount of buoyant material, in cubic feet, shall be determined by the following:
B = 2 + (W − W ÷ d) ÷ 62.4 − c (1)
Where:
B = Volume of buoyant material required in cubic feet.
W = Weight of equipped boat, in pounds.
d = Specific gravity of hull material.
c = Density of buoyant material, in pounds per cubic foot.