![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 46 - Shipping |
![]() |
Chapter I - Coast Guard, Department of Homeland Security |
![]() |
SubChapter F - Marine Engineering |
![]() |
Part 54 - Pressure Vessels |
![]() |
Subpart 54.01 - General Requirements |
§ 54.01-2 - Adoption of division 1 of section VIII of the ASME Boiler and Pressure Vessel Code.
-
§ 54.01-2 Adoption of division 1 of section VIII of the ASME Boiler and Pressure Vessel Code.
(a) Pressure vessels shall be designed, constructed, and inspected in accordance with section VIII of the ASME Boiler and Pressure Vessel Code (incorporated by reference, see 46 CFR 54.01-1), as limited, modified, or replaced by specific requirements in this part. The provisions in the appendices to section VIII of the ASME Boiler and Pressure Vessel Code are adopted and shall be followed when the requirements in section VIII make them mandatory. For general information, table 54.01-2(a) lists the various paragraphs in section VIII of the ASME Boiler and Pressure Vessel Code that are limited, modified, or replaced by regulations in this part.
Table 54.01-2(a) - Limitations and Modifications in the Adoption of Section VIII of the ASME Boiler and Pressure Vessel Code
Paragraphs in section VIII of the ASME Boiler and Pressure Vessel Code1 and disposition Unit of this part U-1 and U-2 modified by 54.01-5 through 54.01-15. U-1(c) replaced by 54.01-5. U-1(d) replaced by 54.01-5(a) and 54.01-15. U-1(g) modified by 54.01-10. U-1(c)(2) modified by 54.01-15. UG-11 modified by 54.01-25. UG-22 modified by 54.01-30. UG-25 modified by 54.01-35. UG-28 modified by 54.01-40. UG-84 replaced by 54.05-1. UG-90 and UG-91 replaced by 54.10-3. UG-92 through UG-103 modified by 54.10-1 through 54.10-15. UG-98 reproduced by 54.10-5. UG-115 through UG-120 modified by 54.10-1. UG-116, except (k), replaced by 54.10-20(a). UG-116(k) replaced by 54.10-20(b). UG-117 replaced by 54.10-20(c). UG-118 replaced by 54.10-20(a). UG-119 modified by 54.10-20(d). UG-120 modified by 54.10-25. UG-125 through UG-137 modified by 54.15-1 through 54.15-15. UW-1 through UW-65 modified by 54.20-1. UW-2(a) replaced by 54.01-5(b) and 54.20-2. UW-2(b) replaced by 54.01-5(b) and 54.20-2. UW-9, UW-11(a), UW-13, and UW-16 modified by 54.20-3. UW-11(a) modified by 54.25-8. UW-26, UW-27, UW-28, UW-29, UW-47, and UW-48 modified by 54.20-5. UB-1 modified by 54.23-1 UB-2 modified by 52.01-95(d) and 56.30-30(b)(1). UCS-6 modified by 54.25-3. UCS-56 modified by 54.25-7. UCS-57, UNF-57, UHA-33, and UHT-57 modified by 54.25-8. UCS-65 through UCS-67 replaced by 54.25-10. UHA-23(b) and UHA-51 modified by 54.25-15. UHT-5(c), UHT-6, and UHT-23 modified by 54.25-20. UHT-82 modified by 54.25-20 and 54.25-25. Appendix 3 modified by 54.15-3. (b) References to the ASME Boiler and Pressure Vessel Code, such as paragraph UG-125, indicate:
U = Division 1 of section VIII of the ASME Boiler and Pressure Vessel Code.
G = Part containing general requirements.
125 = Paragraph within part.
(c) When a paragraph or a section of the regulations in this part relates to material in section VIII of the ASME Boiler and Pressure Vessel Code, the relationship with the code will be shown immediately following the heading of the section or at the beginning of the paragraph, as follows:
(1) (Modifies U______.) This indicates that the material in U______ is generally applicable but is being altered, amplified or augmented.
(2) (Replaces U______.) This indicates that U______ does not apply.
(3) (Reproduces U______.) This indicates that U______ is being identically reproduced for convenience, not for emphasis.
[CGFR 68-82, 33 FR 18828, Dec. 18, 1968, as amended by CGFR 69-127, 35 FR 9976, June 17, 1970; CGFR 72-59R, 37 FR 6188, Mar. 25, 1972; CGD 72-206R, 38 FR 17226, June 29, 1973; CGD 73-254, 40 FR 40163, Sept. 2, 1975; CGD 77-147, 47 FR 21809, May 20, 1982; CGD 85-061, 54 FR 50963, Dec. 11, 1989. Redesignated by CGD 88-032, 56 FR 35822, July 29, 1991; USCG-2003-16630, 73 FR 65164, Oct. 31, 2008]