Code of Federal Regulations (Last Updated: November 8, 2024) |
Title 47 - Telecommunication |
Chapter I - Federal Communications Commission |
SubChapter D - Safety and Special Radio Services |
Part 101 - Fixed Microwave Services |
Subpart J - Local Television Transmission Service |
§ 101.809 - Bandwidth and emission limitations.
-
§ 101.809 Bandwidth and emission limitations.
(a) Stations in this service operating on frequencies in the 27.23-27.28 MHz band will be authorized to employ only amplitude modulated or frequency modulated emission for radiotelephony. The authorization to use such emissions will be construed to include authority to employ unmodulated emission only for temporary or short periods necessary for equipment testing incident to the construction and maintenance of the station.
(b) Stations in the service operating on frequencies above 940 MHz may be authorized to use amplitude modulated, frequency modulated or pulse type of emission for radiotelephony and television. In addition, the use of unmodulated emission may be authorized in appropriate cases.
(c) The maximum bandwidths which will normally be authorized for single channel operation on frequencies below 500 MHz in this service must not exceed the limits set forth below:
Type of emission Authorized bandwidth (kHz) A3E 8 F3E or (G3E) 40 (d) Maximum bandwidths in the following frequency bands must not exceed the limits set forth below:
Maximum Authorized
Frequency band (MHz) Bandwidth (MHz) 3,700 to 4,200 1 20 5,925 to 6,425 1 30 6,425 to 6,525 25 10,700 to 12,200 1 2 40 13,200 to 13,250 25 21,200 to 23,600 1 50 (e) The bandwidths authorized on frequencies above 500 MHz must be appropriate to the type of operation in any particular case. An application requesting such authorization must fully describe the modulation, emission, and bandwidth desired and must specify the bandwidth to be occupied.
[61 FR 26677, May 28, 1996, as amended at 68 FR 4961, Jan. 31, 2003; 70 FR 4788, Jan. 31, 2005]