![]() |
Code of Federal Regulations (Last Updated: July 5, 2024) |
![]() |
Title 47 - Telecommunication |
![]() |
Chapter I - Federal Communications Commission |
![]() |
SubChapter B - Common Carrier Services |
![]() |
Part 22 - Public Mobile Services |
![]() |
Subpart E - Paging and Radiotelephone Service |
![]() |
Point-to-Multipoint Operation |
§ 22.623 - System configuration.
-
§ 22.623 System configuration.
This section requires a minimum configuration for point-to-multipoint systems using the channels listed in § 22.621.
(a) 928-960 MHz. The channels may be assigned, individually or paired, only to fixed transmitters in a system that controls at least four public mobile base transmitters that transmit on the same channel. If a 932-933 MHz channel and a 941-942 MHz channel are assigned as a pair, the 941-942 MHz channel must be assigned only to control transmitters; the 932-933 MHz channel may be assigned to control or fixed relay transmitters.
(b) 470-512 MHz. These channels may be assigned only individually (unpaired), to control transmitters that directly control at least four public mobile base transmitters that transmit on the same channel. Fixed relay transmitters are not authorized.
(c) Selection and assignment. The FCC selects and assigns a channel when granting applications for authorization to operate a new station to transmit in the 470-512, 932-933 and 941-942 MHz frequency ranges. Applicants having a preference may request the assignment of a specific channel or channel pair, but the FCC may in some cases be unable to satisfy such requests.