§ 245.119 - Training requirements.

§ 245.119 Training requirements.

(a) After FRA has approved a railroad's certification program, the railroad shall determine, prior to issuing any person a dispatcher certificate, that the person has successfully completed the training, in accordance with the requirements of this section.

(b) A railroad that elects to accept responsibility to provide initial dispatcher training to persons who have not been previously certified as dispatchers shall state in its certification program whether it will conduct the training program or employ a training program conducted by some other entity on its behalf but adopted and ratified by the railroad.

(c) A railroad that elects to train persons not previously certified as dispatchers shall develop an initial training program which, at a minimum, includes the following:

(1) An explanation of how training must be structured, developed, and delivered, including an appropriate combination of classroom, simulator, computer-based, correspondence, on-the-job training, or other formal training. The curriculum shall be designed to impart knowledge of, and ability to comply with, applicable Federal railroad safety laws, regulations, and orders, as well as any relevant railroad rules and procedures promulgated to implement those applicable Federal railroad safety laws, regulations, and orders. This training shall document a person's knowledge of, and ability to comply with, Federal railroad safety laws, regulations, and orders, as well as railroad rules and procedures.

(2) An on-the-job training component which shall include the following:

(i) A syllabus describing content, required tasks, and related steps the person learning the job shall be able to perform within a specified timeframe;

(ii) A statement of the conditions (e.g., prerequisites, dispatch and related dispatch support systems, documentation, briefings, demonstrations, and practice) necessary for learning transfer; and

(iii) A statement of the standards by which proficiency is measured through a combination of task/step accuracy, completeness, and repetition.

(3) A description of the processes to review and modify its training program when new safety-related railroad laws, regulations, orders, technologies, procedures, software, or equipment are introduced into the workplace, including how it is determined if additional or refresher training is needed.

(d) Prior to beginning the initial dispatching related tasks associated with on-the-job exercises discussed in paragraph (c)(2) of this section, each railroad shall make any relevant information or materials, such as operating rules, safety rules, or other rules, available for referencing by certification candidates.

(e) Prior to a person, not previously certified as a dispatcher, being certified as a dispatcher, a railroad shall require the person to:

(1) Successfully complete the formal initial training program developed pursuant to paragraph (c) of this section and any associated examinations covering the skills and knowledge the person will need to perform the tasks necessary to be a dispatcher;

(2) Perform on-the-job training and demonstrate on-the-job proficiency, with input from a qualified instructor, by successfully completing the tasks and using the dispatching systems and technology necessary to be a dispatcher. A certification candidate may only perform such tasks under the direct onsite supervision of a qualified instructor; and

(3) Demonstrate knowledge of the physical characteristics of any assigned territory. If the railroad uses a written test to fulfill this requirement, the railroad must provide the certification candidate with an opportunity to consult with a supervisory employee who possesses territorial qualifications for the territory to explain a question.

(f) In making the determination required under paragraph (a) of this section, a railroad shall have written documentation showing that:

(1) The person completed a training program that complies with paragraph (c) of this section (if the person has not been previously certified as a dispatcher);

(2) The person demonstrated their knowledge by achieving a passing grade under the testing and evaluation procedures of the training program; and

(3) The person achieved a passing score on the physical characteristics exam associated with the territories, or its pertinent segments, over which the person will be performing dispatching service.

(g) The certification program, required under this part and submitted in accordance with the procedures and requirements described in § 245.107, shall include:

(1) The methods that a person may acquire familiarity with the physical characteristics of a territory;

(2) The procedures used to qualify and requalify a dispatcher on a territory; and

(3) The maximum time period in which a dispatcher can be absent from a territory before requalification is required. In accordance with § 245.120(c), this time period cannot exceed 12 months.

(h) If ownership of a railroad is being transferred from one company to another, the dispatchers of the acquiring company may receive familiarization training from the selling company prior to the acquiring company commencing operation.

(i) A railroad shall provide for the continuing education of its certified dispatchers to ensure that each dispatcher maintains the necessary knowledge concerning:

(1) Railroad safety and operating rules;

(2) Physical territory;

(3) Dispatching systems and technology; and

(4) Compliance with all applicable Federal regulations including, but not limited to, hazardous materials, passenger train emergency preparedness, emergency response procedures, and physical characteristics of a territory.

(j) Each railroad shall adopt and comply with a program meeting the requirements of this section. When any person (including, but not limited to, each railroad, railroad officer, supervisor, and employee) violates any requirement of a program which complies with the requirements of this section, that person shall be considered to have violated the requirements of this section.