![]() |
Code of Federal Regulations (Last Updated: December 30, 2020) |
![]() |
Title 49 - Transportation |
![]() |
Subtitle B — OTHER REGULATIONS RELATING TO TRANSPORTATION |
![]() |
CHAPTER II — FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION |
![]() |
Part 299 - TEXAS CENTRAL RAILROAD HIGH-SPEED RAIL SAFETY STANDARDS |
Subpart A—General Requirements |
§ 299.1 Purpose and scope. |
§ 299.3 Applicability. |
§ 299.5 Definitions. |
§ 299.7 Responsibility for compliance. |
§ 299.9 Notifications and filings. |
§ 299.11 Electronic recordkeeping. |
§ 299.13 System description. |
§ 299.15 Special approvals. |
§ 299.17 Incorporation by reference. |
Subpart B—Signal and Trainset Control System |
§ 299.201 Technical PTC system requirements. |
§ 299.203 PTC system required. |
§ 299.205 PTC System Certification. |
§ 299.207 PTC Safety Plan content requirements. |
§ 299.209 PTC system use and failures. |
§ 299.211 Communications and security requirements. |
§ 299.213 Records retention. |
§ 299.215 Operations and Maintenance Manual. |
Subpart C—Track Safety Standards |
§ 299.301 Restoration or renewal of track under traffic conditions. |
§ 299.303 Measuring track not under load. |
§ 299.305 Drainage. |
§ 299.307 Vegetation. |
§ 299.309 Classes of track: operating speed limits. |
§ 299.311 Track geometry; general. |
§ 299.313 Track geometry; performance based. |
§ 299.315 Curves; elevation and speed limitations. |
§ 299.317 Track strength. |
§ 299.319 Track fixation and support. |
§ 299.321 Defective rails. |
§ 299.323 Continuous welded rail (CWR) plan. |
§ 299.325 Continuous welded rail (CWR); general. |
§ 299.327 Rail end mismatch. |
§ 299.329 Rail joints and torch cut rails. |
§ 299.331 Turnouts and crossings generally. |
§ 299.333 Frog guard rails and guard faces; gauge. |
§ 299.335 Derails. |
§ 299.337 Automated vehicle-based inspection systems. |
§ 299.339 Daily sweeper inspection. |
§ 299.341 Inspection of rail in service. |
§ 299.343 Initial inspection of new rail and welds. |
§ 299.345 Visual inspections; right of way. |
§ 299.347 Special inspections. |
§ 299.349 Inspection records. |
§ 299.351 Qualifications for track maintenance and inspection personnel. |
§ 299.353 Personnel qualified to supervise track restoration and renewal. |
§ 299.355 Personnel qualified to inspect track. |
§ 299.357 Personnel qualified to inspect and restore continuous welded rail. |
Subpart D—Rolling Stock |
§ 299.401 Clearance requirements. |
§ 299.403 Trainset structure. |
§ 299.405 Trainset interiors. |
§ 299.407 Glazing. |
§ 299.409 Brake system. |
§ 299.411 Bogies and suspension system. |
§ 299.413 Fire safety. |
§ 299.415 Doors. |
§ 299.417 Emergency lighting. |
§ 299.419 Emergency communication. |
§ 299.421 Emergency roof access. |
§ 299.423 Markings and instructions for emergency egress and rescue access. |
§ 299.425 Low-location emergency exit path marking. |
§ 299.427 Emergency egress windows. |
§ 299.429 Rescue access windows. |
§ 299.431 Driver's controls and cab layout. |
§ 299.433 Exterior lights. |
§ 299.435 Electrical system design. |
§ 299.437 Automated monitoring. |
§ 299.439 Event recorders. |
§ 299.441 Trainset electronic hardware and software safety. |
§ 299.443 Safety appliances. |
§ 299.445 Trainset inspection, testing, and maintenance requirements. |
§ 299.447 Movement of defective equipment. |
Subpart E—Operating Rules |
§ 299.501 Purpose. |
§ 299.503 Operating rules; filing and recordkeeping. |
§ 299.505 Programs of operational tests and inspections; recordkeeping. |
§ 299.507 Program of instruction on operating rules; recordkeeping. |
Subpart F—System Qualification Tests |
§ 299.601 Responsibility for verification demonstrations and tests. |
§ 299.603 Preparation of system-wide qualification test plan. |
§ 299.605 Functional and performance qualification tests. |
§ 299.607 Pre-revenue service system integration testing. |
§ 299.609 Vehicle/track system qualification. |
§ 299.611 Simulated revenue operations. |
§ 299.613 Verification of compliance. |
Subpart G—Inspection, Testing, and Maintenance Program |
§ 299.701 General requirements. |
§ 299.703 Compliance. |
§ 299.705 Standard procedures for safely performing inspection, testing, and maintenance, or repairs. |
§ 299.707 Maintenance intervals. |
§ 299.709 Quality control program. |
§ 299.711 Inspection, testing, and maintenance program format. |
§ 299.713 Program approval procedure. |
Appendix A to Part 299—Criteria for Certification of Crashworthy Event Recorder Memory Module |
Appendix B to Part 299—Cab Noise Test Protocol |