Part 223 - Threatened Marine and Anadromous Species  


Subpart A - General Provisions
§ 223.101 - Purpose and scope.
§ 223.102 - Enumeration of threatened marine and anadromous species.
Subpart B - Restrictions Applicable to Threatened Marine and Anadromous Species
§ 223.201 - Guadalupe fur seal.
§ 223.202 - [Reserved]
§ 223.203 - Anadromous fish.
§ 223.204 - Tribal plans.
§ 223.205 - Sea turtles.
§ 223.206 - Exceptions to prohibitions relating to sea turtles.
§ 223.207 - Approved TEDs.
§ 223.208 - Corals.
§ 223.209 - [Reserved]
§ 223.210 - Green sturgeon.
§ 223.211 - Atlantic sturgeon.
§ 223.212 - Southern DPS of spotted seal.
§ 223.213 - Humpback whales.
§ 223.214 - Approaching threatened humpback whales in Alaska.
§ 223.301 - Special rules—marine and anadromous fishes.
Figure 1 to Part 223 - NMFS TED
Figure 2 to Part 223 - Cameron TED
Appendix A to §223.203 - List of Guidance Documents
Figure 12a to Part 223 - Attachment of the Exit Hole Cover
Figure 12b to Part 223 - Grid TED Leatherback Modification
§§ 223.211--223.300 - [Reserved]
§§ 223.212--223.300 - [Reserved]
§§ 223.213--223.300 - [Reserved]
§§ 223.215--223.300 - [Reserved]
Figure 11 to Part 223 - Modified Flounder TED
Figure 15 to Part 223 - Weedless TED Brace Bar Description
Figure 10 to Part 223 - Flounder TED
Figure 12 to Part 223 - Escape Opening & Cover Dimensions for 71-inch TED
Figure 13 to Part 223 - Single Grid Hard TED Escape Opening
Figure 16 to Part 223 - Escape Opening and Flap Dimensions for the Double Cover Flap TED
Figure 17 to Part 223 - Boone Wedge Cut Escape Opening
Figure 3 to Part 223 - Matagorda TED
Figure 4 to Part 223 - Georgia TED
Figure 5 to Part 223 - Net Diagram for the Excluder Panel of the Parker Soft TED
Figure 6 to Part 223 - TED Extension in Summer Flounder Trawl
Figure 18a to Part 223 - xxx
Figure 19a to Part 223 - xxx
Figure 18b to Part 223 - xxx
Figure 19b to Part 223 - xxx
Figure 18c to Part 223 - xxx
Figures 1-2 to Part 223
Figures 1-2 to Part 223 - [Reserved]
Figures 7-9b to Part 223
Figures 7-9b to Part 223 - [Reserved]
Figures 14 a and 14 b to Part 223 - Maximum Angle of Deflector Bars With Straight Bars Attached to the Bottom of the Frame and Maximum Angle of Deflector Bars With Bent Bars Attached to the Bottom of the Frame
Figures 14a and 14b to Part 223 - Maximum Angle of Deflector Bars With Straight Bars Attached to the Bottom of the Frame and Maximum Angle of Deflector Bars With Bent Bars Attached to the Bottom of the Frame
Figures 19a and 19b to Part 223 - Chauvin Shrimp Deflector Installation Details
Figures 18a, 18b and 18c to Part 223 - Large Frame TED Escape Opening; Minimum Dimensions Using All-Bar Cuts (Triangular Cuts); Large Frame TED Escape Opening; Minimum Dimensions Using All-Bar Cuts and Leading Edge Cut; Large Frame TED Escape Opening; Minimum Dimensions Using All-Points Side Cuts (Rectangular Cut)