Code of Federal Regulations (Last Updated: May 6, 2024) |
Title 7 - Agriculture |
Subtitle B - Regulations of the Department of Agriculture |
Chapter I - Agricultural Marketing Service (Standards, Inspections, Marketing Practices), Department of Agriculture |
SubChapter C - Requirements and Standards Under the Agricultural Marketing Act of 1946 and the Egg Products Inspection Act |
Part 51 - Fresh Fruits, Vegetables, and Other Products (Inspection, Certification, and Standards) |
Subpart W - United States Standards for Grades of Shelled Almonds |
Grades |
§ 51.2111 - U.S. No. 1 Pieces.
-
§ 51.2111 U.S. No. 1 Pieces.
“U.S. No. 1 Pieces” consists of shelled almonds which are not bitter, which are clean and well dried, and which are free from decay, rancidity, insect injury, foreign material, particles and dust, and free from damage caused by mold, gum, shriveling, brown spot or other means.
(a) Unless otherwise specified, the minimum diameter shall be not less than 8⁄64 of an inch (3.2 mm). (See §§ 51.2113 and 51.2114.)
(b) In order to allow for variations incident to proper grading and handling, the following tolerances, by weight, shall be permitted:
(1) For bitter almonds mixed with sweet almonds. 1 percent;
(2) For foreign material. Two-tenths of 1 percent (0.20 percent). No part of this percentage shall be allowed for glass and metal;
(3) For particles and dust. 1 percent; and
(4) For other defects. 5 percent, including not more than three-fifths of this amount, or 3 percent, for serious damage.