[Federal Register Volume 63, Number 100 (Tuesday, May 26, 1998)]
[Rules and Regulations]
[Pages 28556-28753]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-12575]
[[Page 28555]]
_______________________________________________________________________
Part II
Environmental Protection Agency
_______________________________________________________________________
40 CFR Parts 148, 261, 266, 268, and 271
Land Disposal Restrictions Phase IV: Final Rule Promulgating Treatment
Standards for Metal Wastes and Mineral Processing Wastes; Mineral
Processing Secondary Materials and Bevill Exclusion Issues; Treatment
Standards for Hazardous Soils, and Exclusion of Recycled Wood
Preserving Wastewaters; Final Rule
Federal Register / Vol. 63, No. 100 / Tuesday, May 26, 1998 / Rules
and Regulations
[[Page 28556]]
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Parts 148, 261, 266, 268, and 271
[EPA-F-98-2P4F-FFFFF; FRL-6010-5]
RIN 2050 AE05
Land Disposal Restrictions Phase IV: Final Rule Promulgating
Treatment Standards for Metal Wastes and Mineral Processing Wastes;
Mineral Processing Secondary Materials and Bevill Exclusion Issues;
Treatment Standards for Hazardous Soils, and Exclusion of Recycled Wood
Preserving Wastewaters
AGENCY: Environmental Protection Agency.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: This rule promulgates Land Disposal Restrictions treatment
standards for metal-bearing wastes, including toxicity characteristic
metal wastes, and hazardous wastes from mineral processing. The set of
standards being applied to these wastes is the universal treatment
standards. These standards are based upon the performance of the Best
Demonstrated Available technologies for treating these, or similar,
wastes. This rule also revises the universal treatment standards for
twelve metal constituents, which means that listed and characteristic
wastes containing one or more of these constituents may have to meet
different standards than they currently do.
In a related section regarding wastes and secondary materials from
mineral processing, EPA is amending the rules to define which secondary
materials from mineral processing are considered to be wastes and
potentially subject to Land Disposal Restrictions. The intended effect
is to encourage safe recycling of mineral processing secondary
materials by reducing regulatory obstacles to recycling, while ensuring
that hazardous wastes are properly treated and disposed. EPA also is
finalizing decisions on a set of mineral processing issues wastes which
courts have been remanded to EPA. These include retaining the Toxicity
Characteristic Leaching Procedure as the test for identifying the
toxicity characteristic for mineral processing wastes, and readdressing
the regulatory status of a number of miscellaneous mineral processing
wastes.
This rule also amends the LDR treatment standards for soil
contaminated with hazardous waste. The purpose of this revision is to
create standards which are more technically and environmentally
appropriate to contaminated soils than those which currently apply.
Finally, this rule excludes from the definition of solid waste
certain shredded circuit boards in recycling operations, as well as
certain materials reused in wood preserving operations.
EFFECTIVE DATES: This final rule is effective on August 24, 1998.
Compliance dates:
--For prohibition on underground injection of certain wastes at 40 CFR
148.18: May 26, 2000;
--For definition of solid waste provisions at 40 CFR 261.2,
261.4(a)(15), and 261.4(b): November 27, 1998;
--For exclusion of recycled wood preserving wastewaters at 40 CFR
261.4(a)(9): May 26, 1998;
--For prohibition on land disposal of wastes from elemental phosphorus
processing and on mixed radioactive wastes at 40 CFR 268.34(b): May 26,
2000; and
--For land Disposal Restrictions treatment standards at 40 CFR 268.49
for soil contaminated with previously prohibited wastes: May 26, 1998.
ADDRESSES: Supporting materials are available for viewing in the RCRA
Information Center (RIC), located at Crystal Gateway I, First Floor,
1235 Jefferson Davis Highway, Arlington, Virginia. The docket
information number is F-98-2P4F-FFFFF. The RIC is open from 9 a.m. to 4
p.m., Monday through Friday, excluding federal holidays. To review
docket materials, it is recommended that the public make an appointment
by calling (703) 603-9230. The public may copy a maximum of 100 pages
from any regulatory docket at no charge. Additional copies cost $0.15/
page. The index and some supporting materials are available
electronically. See the ``Supplementary Information'' section for
information on accessing them.
FOR FURTHER INFORMATION CONTACT: For general information, contact the
RCRA Hotline at (800) 424-9346 or TDD (800) 553-7672 (hearing
impaired). In the Washington, D.C. metropolitan area, call (703) 412-
9810 or TDD (703) 412-3323.
For more detailed information on specific aspects of this
rulemaking, contact the Waste Treatment Branch (5302W), Office of Solid
Waste (OSW), U.S. Environmental Protection Agency, 401 M Street S.W.,
Washington, D.C. 20460; phone (703) 308-8434. For information on the
issue of treatment standards for metal-bearing wastes, contact Elaine
Eby (703) 308-8449 or Anita Cummings at (703) 308-8303. For questions
on land disposal restrictions (LDR) treatment standards for mineral
processing wastes, radioactive mixed wastes, and grab versus composite
sampling methods, contact Anita Cummings at (703) 308-8303. For
information on treatment standards for manufactured gas plant wastes,
contact Rita Chow at (703) 308-6158. Contact Rhonda Minnick at (703)
308-8771 for information on improvements and corrections to the Land
Disposal Restrictions. For information on secondary mineral processing
materials and Bevill issues, call Ashley Allen at 703-308-8419 or
Stephen Hoffman of the Industrial and Extractive Wastes Branch at (703)
308-8413. For questions on treatment standards for hazardous soil,
contact Elizabeth McManus of the Permits and State Programs Division at
(703) 308-8657. Contact Stephen Bergman of the Hazardous Waste
Identification Division at (703) 308-7262 for questions on the
exclusion for wood preserving wastewaters. For information on the
capacity analyses, contact Bill Kline at (703) 308-8440 or C. Pan Lee
at (703) 308-8478. For questions on the regulatory impact analyses,
contact Paul Borst at (703) 308-0481. For other questions, call Sue
Slotnick at (703) 308-8462.
SUPPLEMENTARY INFORMATION: Availability of Rule on the Internet: Please
follow these instructions to access the rule: From the World Wide Web
(WWW), type http://www.epa.gov/rules and regulations. In addition,
several technical background documents contained in the docket
supporting this rule will be available on the Internet at http://
www.epa.gov/offices and regions/oswer.
Table of Contents
I. Introduction to the Phase IV Rule
II. Potentially Regulated Entities
III. Revised Land Disposal Restrictions (i.e., Universal Treatment
Standards) for Metal Constituents in all Hazardous Wastes, Including
Toxic Characteristic Metals
A. History of Metal Treatment Standards
B. Applicability of Metal Treatment Standards
C. Development of New Treatment Standards for Hazardous Wastes
Containing Metals
1. Measuring Compliance by Grab or Composite Sampling
2. Development of Treatment Standards for Metal Wastes
a. Final Universal Treatment Standard for Nonwastewater Forms of
Antimony
b. Treatment Standard for Wastewater Forms of Arsenic Waste
c. Treatment Standards for Barium Waste
d. Final Universal Treatment Standard for Nonwastewater Forms of
Beryllium Waste
[[Page 28557]]
e. Treatment Standards for Cadmium Wastes
f. Treatment Standards for Chromium Wastes
g. Final Treatment Standards for Lead Wastes
h. Treatment Standards for Wastewater and Nonwastewater Forms of
Mercury Waste
i. Final Universal Treatment Standard for Nonwastewater Forms of
Nickel
j. Final Treatment Standards for Selenium Wastes
k. Final Treatment Standards for Silver Wastes
l. Final Universal Treatment Standard for Nonwastewater Forms of
Thallium
m. Final Treatment Standard for Nonwastewater Forms of Vanadium
in P119 and P120 Wastes
n. Final Treatment Standard for Nonwastewater Forms of Zinc in
K061 Waste
D. Use of TCLP to Evaluate Performance of Treatment Technology
for Treating Hazardous Metal Constituents
IV. Application of Land Disposal Restrictions to Characteristic
Mineral Processing Wastes
A. Proposal, Comments, and Responses
B. Clarification That Universal Treatment Standards Apply to
Ignitable, Corrosive, and Reactive Characteristic Mineral Processing
Wastes
C. Use of TCLP to Evaluate Performance of Treatment Technology
for Treating Hazardous Metal Constituents in Mineral Processing
Wastes
V. Other LDR Issues That May Affect Both Toxic Characteristic Metal
Wastes and Characteristic Mineral Processing Wastes
A. Treatment Standards for Soil Contaminated with TC Metal
Wastes or Characteristic Mineral Processing Wastes
1. Summary
2. Discussion of Today's Approach
B. LDR Treatment Standards for Manufactured Gas Plant Waste
(MGP)
1. Summary
2. Background
3. Public Comments and EPA Responses
C. Treatment Standards for Debris Contaminated with Phase IV
wastes
D. Treatment Standards for Radioactive Mixed Waste
1. Background
2. Proposal and Issues Discussed by Comments
E. Underlying Hazardous Constituents in TC Metal Wastes and
Characteristic
Mineral Processing Wastes
1. Background
2. Discussion of Today's Approach
VI. Issues Relating to Newly-Identified Mineral Processing Wastes
A. Introduction
B. Overview of Today's Rule
1. Issues Related to Which Mineral Processing Secondary
Materials are Subject to LDRs
2. Issues Related to Whether Materials are Within the Scope of
the Bevill Exclusion
a. Use of Non-Bevill Materials as Feedstocks to Operations Whose
Waste is Bevill Exempt
b. Uniquely Associated
c. Bevill Mixtures
d. Response to Court Remands Dealing with Other Issues Relating
to Mineral Processing and to Scope of Bevill Exclusion
e. Reexamination of Bevill Exempt Wastes
C. Analysis of and Response to Public Comments
1. Jurisdiction
a. EPA Authority to Regulate Mineral Processing Secondary
Materials Reclaimed Within the Industry
b. Are There Limits on Jurisdiction? (Response to Public
Interest Group Position)
c. Immediate Reuse
d. Relation to the Current Regulatory Definition of Solid Waste
e. Otherwise Excluded Mineral Processing Units Which Serve as
Disposal Units
2. Scope of This Rule
a. Mineral Processing Wastes Covered by This Rule
b. Wastewater Treatment Surface Impoundments
c. Materials Outside the Scope
3. Mineral Processing Secondary Material Volumes and
Environmental Damages
a. Volume of Secondary Materials and Large Volume Exemption
b. Reliability of Damage and Environmental Release Reports
4. Conditions to the Exclusion
a. Legitimacy
b. Design and Construction Standards
c. Units Eligible for Conditional Exclusion and Conditions
Attached to Such Units
d. Speculative Accumulation
e. One Time Notification
5. Bevill Related Issues
a. Uniquely Associated
b. Addition of Mineral Processing Secondary Materials to Units
Processing Bevill Raw Materials
c. Bevill Mixture Rule and Disposal
d. Remining
6. Responses to Court Remands
a. Applicability of the Toxicity Characteristic Leaching
Procedure (TCLP) to Mineral Processing Wastes
b. Remanded Mineral Processing Wastes
c. Lightweight Aggregate Mineral Processing Wastes
d. Mineral Processing Wastes From the Production of Titanium
Tetrachloride
VII. LDR Treatment Standards for Soil
VIII. Improvements and Corrections to LDR Regulations
A. Typographical Error in Sec. 261.1(c)(10)
B. Typographical Error in Sec. 268.4(a)(2)(ii) and (a)(2)(iii)
C. Clarifying Language Added to Sec. 268.7
D. Correction to Section 268.40--Treatment Standards for
Hazardous Waste
E. Removal of California List Requirements and de minimis
Provision from Sec. 268.42
F. Typographical Errors and Outdated Cross-references in
Sec. 268.45
G. Correction to Sec. 268.48 to Explain That Sulfides are not
Regulated as Underlying Hazardous Constituents in Characteristic
Wastes
H. Cross References in Sec. 268.50(e)
I. Mistakes in Appendices VII and VIII
J. Clarification Regarding Point of Generation of Boiler
Cleanout Rinses
IX. Capacity Determination for Phase IV Land Disposal Restrictions
A. Introduction
B. Available Capacity for Surface Disposed Wastes
1. Stabilization
2. Vitrification
3. Metal Recovery
4. Thermal Treatment
C. Required Capacity and Variance Determination for Surface
Disposed TC Metal Wastes
D. Required Capacity and Variance Determination for Surface
Disposed Mineral Processing Wastes
E. Phase IV Mineral Processing and TC Metal Wastes Injected Into
Underground Injection Control (UIC) Class I Wells
F. Mixed Radioactive Wastes
G. Summary
X. Change to Definition of Solid Waste to Exclude Wood Preserving
Wastewaters and Spent Wood Preserving Solutions From RCRA
Jurisdiction
A. Summary of the Proposal
B. Modifications to the Proposal
1. Notification
2. Conditions Under Which the Exclusion Would No Longer Apply
C. Other Comments
1. Oil Borne Facilities
2. Application of the Conditions to Units Other Than the Drip
Pad
3. Relationship of Today's Exclusion to Previous Industry
Exclusions
4. Units That May Be Visually or Otherwise Determined to Prevent
Release
5. CESQG Status
D. State Authorization
XI. Clarification of the RCRA Exclusion of Shredded Circuit Boards
XII. Regulatory Requirements
A. Regulatory Impact Analysis Pursuant to Executive Order 12866
1. Methodology Section
2. Results
B. Regulatory Flexibility
C. Unfunded Mandates Reform Act
D. Paperwork Reduction Act
XIII. Environmental Justice
A. Applicability of Executive Order 12898
B. Potential Effects
XIV. State Authority
A. Statutory Authority
B. Effect on State Authorization
C. Authorization Procedures
D. Streamlined Authorization Procedures
XV. Submission to Congress and General Accounting Office
XVI. Executive Order 13045: Protection of Children from
Environmental Health Risks and Safety Risks
XVII. National Technology Transfer and Advancement Act
I. Introduction to the Phase IV Rule
In the 1984 Hazardous and Solid Waste Amendments (HSWA) to the
Resource Conservation and Recovery Act (RCRA), Congress specified that
land disposal of hazardous waste is prohibited unless the waste first
meets
[[Page 28558]]
treatment standards established by EPA or is disposed in units from
which there will be no migration of hazardous constituents for as long
as the waste remains hazardous. The HSWA amendments require that
treatment standards must substantially diminish the toxicity or
mobility of hazardous waste, so that short- and long-term threats to
human health and the environment are minimized.
Today's Phase IV final rule is the latest in a series of LDR rules
that establish treatment standards for wastes identified or listed as
hazardous after the date of the 1984 amendments. (See RCRA
Sec. 3004(g)(4)). EPA proposed the Phase IV rule in four Federal
Register notices, and issued three NODAs setting out additional data
relevant to this proceeding. In two Federal Register notices prior to
today's, EPA promulgated various rules proposed in the Phase IV
proposals: treatment standards for wood preserving wastes, paperwork
reduction, and clarification of treatability variances. Today's final
rule promulgates regulations addressing most of the remaining issues
discussed in Phase IV proposals and NODAs. The table at the end of this
introduction lists references for all the Phase IV Notices, plus others
cited frequently in the preamble.
This final Phase IV preamble contains five major, interrelated
sections. The first section explains the new land disposal restrictions
treatment standards for wastes identified as hazardous because they
exhibit the toxicity characteristic for metals (referred to as ``TC
metal wastes''). The section also revises the universal treatment
standards (UTS) for 12 metal constituents in all hazardous wastes. The
TC metal wastes will now be required to meet the universal treatment
standards as do most other hazardous wastes. The second major preamble
section establishes the prohibition on land disposal plus treatment
standards for a particular type of newly identified hazardous waste:
mineral processing waste that exhibits a characteristic of hazardous
waste. The third section addresses additional issues affecting both TC
metal wastes and characteristic mineral processing wastes. The fourth
section amends the rules defining when secondary materials being
recycled are solid wastes. It states that secondary materials from
mineral processing which are generated and reclaimed within that
industry are not solid wastes unless they are managed in land disposal
units before being reclaimed. Such materials are not subject to
regulation as hazardous wastes. That part of the preamble also
addresses other issues related to mineral processing. The final major
preamble section promulgates amended treatment standards for soil that
contains hazardous waste or which exhibits a characteristic of
hazardous waste.
Today's rule also includes two brief sections on hazardous waste
issues unrelated to the major sections. One clarifies that a
previously-promulgated exclusion from hazardous waste regulation for
recycled shredded circuit boards also applies to whole circuit boards
under certain conditions. The other section promulgates an exclusion
from RCRA jurisdiction for certain wood preserving wastewaters and
spent wood preserving solutions when recycled.
Table of Selected LDR Federal Register Notices
--------------------------------------------------------------------------------------------------------------------------------------------------------
Common name Title of rule in Federal Register Date Citation
--------------------------------------------------------------------------------------------------------------------------------------------------------
Third Third LDR Final Rule......... Land Disposal Restrictions for Third Third June 1, 1990........................... 55 FR 22520.
Scheduled Wastes; Rule.
Phase II LDR Proposal.............. Land Disposal Restrictions for Newly September 14, 1993..................... 58 FR 48092.
Identified and Listed hazardous Waste and
hazardous soil; Proposed Rule.
Phase III LDR Proposal............. Land Disposal Restrictions Phase III: March 2, 1995.......................... 60 FR 11702.
Decharacterized Wastewaters, Carbamate and
Organobromine Wastes, and Spent Potliners;
Proposed Rule.
Phase IV Original Proposal......... Land Disposal Restrictions--Phase IV: Issues August 22, 1995........................ 60 FR 43654.
Associated With Clean Water Act Treatment
Equivalency, and Treatment Standards for Wood
Preserving Wastes and Toxicity Characteristic
Metal Wastes; Proposed Rule.
Phase IV First Supplemental Land Disposal Restrictions--Clarification of January 25, 1996....................... 61 FR 2338.
Proposal. Bevill Exclusion for Mining Wastes, to the
Definition of Solid Waste for Mineral
Processing Wastes, Treatment Standards for
Characteristic Mineral Processing Wastes, and
Associated Issues.
HWIR Media Proposal................ Requirements for Management of Hazardous April 29, 1996......................... 61 FR 11804.
Contaminated Media.
Phase IV NODA #1................... Land Disposal Restrictions Phase IV Proposed May 10, 1996........................... 61 FR 21417.
Rule--Issues Associated With Clean Water Act
Treatment Equivalency, and Treatment
Standards for Wood Preserving Wastes and
Toxicity Characteristic Metal Wastes; Notice
of Data Availability.
Phase IV NODA #2................... Land Disposal Restrictions--Phase IV: March 5, 1997.......................... FR 62 10004.
Treatment Standards for Characteristic Metal
Wastes; Notice of Data Availability.
Phase IV LDR Wood Preserving Final Land Disposal Restrictions Phase IV: Treatment May 12, 1997........................... 62 FR 25998.
Rule. Standards for Wood Preserving Waste,
Paperwork Reduction and Streamlining,
Exemptions from RCRA for Certain Processed
Materials; and Miscellaneous Hazardous Waste
Provisions; Final Rule.
Phase IV Second Supplemental Land Disposal Restrictions Phase IV: Second May 12, 1997........................... 62 FR 26041.
Proposal. Supplemental Proposal on Treatment Standards
for Metal Wastes and Mineral Processing
Wastes, Mineral Processing and Bevill
Exclusion Issues, and the Use of Hazardous
Waste as Fill.
[[Page 28559]]
Phase IV NODA #3................... Land Disposal Restrictions Phase IV: Second November 10, 1997...................... 62 FR 60465.
Supplemental Proposal on Treatment Standards
for Metal Wastes and Mineral Processing
Wastes, Mineral Processing and Bevill
Exclusion Issues, and the Use of Hazardous
Waste as Fill; Notice of Data Availability.
Treatability Variance Final Rule... Clarification of Standards for Hazardous Waste December 5, 1997....................... 62 FR 64504.
Land Disposal Restriction Treatment Variances.
--------------------------------------------------------------------------------------------------------------------------------------------------------
II. Potentially Regulated Entities
Entities potentially regulated by this final rule vary according to
the section of the rule. The following table shows the industry
categories that may be regulated according to each major section of the
rule. The table is not intended to be exhaustive or definitive with
respect to every case-specific circumstance. Rather, it is a general
guide for readers regarding entities that EPA is now aware could
potentially be regulated by this action. Other types of entities not
listed in the table could also be regulated, and failure to mention
them in the table should not be taken as any type of regulatory
determination on the part of the Agency.
Table of Entities Potentially Affected by the Phase IV Final Rule
----------------------------------------------------------------------------------------------------------------
Examples of entities
Section of the rule Category potentially affected
----------------------------------------------------------------------------------------------------------------
LDR treatment standards for TC metal Generators of Toxicity Characteristic Facilities in the following
hazardous wastes, characteristic (TC) metal hazardous wastes (D004-- industries: primary mineral
mineral processing wastes, and other D011), characteristic mineral processing, chemical
metal-bearing wastes. processing waste, or any hazardous manufacturers, pharmaceutical
waste required to meet the LDR producers, paint producers,
treatment standard for antimony, manufacturers of motor
barium, beryllium, cadmium, chromium, vehicle parts, blast furnaces
lead, nickel, selenium, silver, and steel mills, metal
thallium, vanadium, or zinc. plating and polishing, and
aircraft parts and equipment.
Facilities that treat and/or dispose of Hazardous waste treatment and
TC metal hazardous wastes, disposal facilities.
characteristic mineral processing
wastes, and other metal-bearing
hazardous wastes.
LDR treatment standards for hazardous Entities managing hazardous soil........ Private or public parties
soil. remediating sites containing
hazardous soil
Mineral Processing Secondary Materials Facilities that generate, store, and/or Copper smelters, gold
recycle secondary materials from refiners, and other primary
primary mineral processing. metals producers that return
wastestreams to units for
additional recovery
Exclusion for Recycled Wood Preserving Wood Preserving Facilities.............. Facilities that generate and
Process Wastewaters. reclaim drippage and
wastewaters on-site from the
wood processing industry.
----------------------------------------------------------------------------------------------------------------
III. Revised Land Disposal Restrictions (i.e., Universal Treatment
Standards) for Metal Constituents in all Hazardous Wastes,
Including Toxic Characteristic Metals
Summary
There are two purposes to today's new treatment standards for
metal-containing wastes. First, EPA is revising the numerical standards
because new data are available on which to base more accurate
standards. Second, EPA is including a new set of wastes in the current
treatment standard regime, continuing EPA's efforts to apply the same
LDR treatment standards when technically and legally possible. (In a
subsequent section of this rule, EPA is expanding the treatment
standard regime to include yet another set of wastes. These are
characteristic mineral processing wastes that are not currently subject
to land disposal restrictions.)
The numerical standards that EPA is revising are the universal
treatment standards (UTS) for 12 metal constituents. The new UTS will
apply to nonwastewater forms of any listed or characteristic hazardous
waste that is already required to meet the UTS for those constituents
in the waste. The revised UTS are less stringent for 7 constituents,
and more stringent for 5. The rule does not affect the UTS for
wastewater forms of these wastes, and does not change the UTS for any
other constituents, including any of the organics.
The new set of wastes that EPA is bringing into the current LDR
regime is the group of 8 wastes known as TC metal wastes--wastes
identified as hazardous because they exhibit the toxicity
characteristic due to the presence of the metals enumerated in 261.24
(Waste codes D004-D011). These are wastes that exhibit the toxicity
characteristic because of high toxic metal content. By today's rule,
that key metal must be treated to the UTS for that metal. Furthermore,
any underlying hazardous constituents (UHCs) must be treated to UTS
levels as well, whether these UHCs are organics or metals. Both
wastewater and nonwastewater forms of the TC metal wastes are affected
by today's rule, except for arsenic, for which only the wastewater
forms are affected.
Hazardous wastes that exhibit both the TC for metals and the
predecessor characteristic based on the Extraction Procedure (EP) are
presently only required to be treated to reduce metal levels to below
the characteristic level. Today's rule, for the most part, will require
additional treatment of these metal constituents before land disposal
can occur.
The Agency also finds that the treatment standards established in
[[Page 28560]]
today's rule are not established below levels at which threats to human
health and the environment are minimized. See Hazardous Waste Treatment
Council v. EPA, 886 F.2d 355, 362 (D.C. Cir. 1990). That case held that
the statute can be read to allow either technology-based or risk-based
LDR treatment standards, and further held that technology-based
standards are permissible so long as they are not established ``beyond
the point at which there is no `threat' to human health or the
environment.'' Id. at 362. EPA's finding that today's standards are not
below a ``minimize threat'' level is based on the Agency's inability at
the present time to establish concentration levels for hazardous
constituents which represent levels at which threats to human health
and the environment are minimized. As the Agency has explained a number
of times, determining these levels on a national basis--which requires
determination of relevant exposure pathways and potential receptors for
all hazardous constituents in hazardous wastes, with all the attendant
uncertainties involved in such a national determination--has not yet
proven possible. See, e.g., 55 FR at 6642 (February 26, 1990). Thus,
the Agency continues to find that technology-based standards remain the
best approach for the national treatment standards since such standards
eliminate as much of the inherent uncertainty of hazardous waste land
disposal and so fulfill the Congressional intent in promulgating the
land disposal restrictions provisions. Id. However, the Agency believes
that it may be possible to make valid determinations that threats to
human health and the environment are minimized on an individualized
basis in the context of certain site-specific remediations, and
accordingly has provided in this rule a variance from technology-based
treatment requirements for contaminated soils generated in certain
remediations. See section VII below.
A. History of Metal Treatment Standards
Land disposal of hazardous wastes is largely prohibited by statute,
unless the wastes meet the applicable treatment standards established
by EPA prior to land disposal. See RCRA sections 3004(d)-(g), (m); (the
exception for no-migration units is not relevant to today's rule).
Until today's rule, metals that were characteristic because they failed
the Toxicity Characteristic Leaching Procedure (TCLP) and also failed
the Extraction Procedure (EP)--which preceded the use of the TCLP as a
means of identifying whether a waste exhibited a characteristic of
hazardous waste--were subject to treatment standards at levels equal to
the TC levels (55 FR 22520, June 1, 1990). (Note that wastes that were
characteristic according to the TCLP but did not fail the EP were
considered, until promulgation of today's rule, to be newly identified
wastes, and were not subject to the LDR requirements. Today's rule
makes these wastes subject to LDR). However, the TC levels are
typically higher than those treatment levels for which threats posed by
land disposal of the wastes are minimized. (Waste Management v. EPA,
976 F.2d 2, 13-14, 26-27, 32 (D.C. Cir. 1992). Consequently, treatment
to levels lower than the characteristic levels normally is required.
Id.
In an effort to make treatment standards as uniform as possible
while adhering to the fundamental requirement that the standards must
minimize threats to human health and the environment, EPA developed the
UTS. Under the UTS, whenever technically and legally possible, the
Agency adopts the same technology-based numerical limit for a hazardous
constituent regardless of the type of hazardous waste in which the
constituent is present (see 40 CFR 268.40; and 59 FR 47982, September
19, 1994). In the original Phase IV proposal, EPA proposed to apply the
metal UTS, as measured by the TCLP (60 FR 43582, August 22, 1995; see
40 CFR 261.24), to all TC metal wastes. The TCLP measures the
possibility that a waste may leach toxic metals above a designated
concentration level under certain assumed disposal conditions, and so
is a measure of the potential mobility of toxic metals in a waste.
Commenters in response to the original proposal took issue with the
Agency's use of data previously used to establish metal UTS as a basis
for establishing the treatment standards for characteristic metal
wastes. The commenters raised three basic issues with regard to the
data transfer. First, they said that characteristic metal wastes are
extremely variable and the data used to calculate the treatment
standards were not representative of the diversity of TC metal wastes.
Second, the commenters said that although two treatment technologies--
high temperature metals recovery (HTMR) and stabilization--were
determined to be Best Demonstrated Available Technology (BDAT), the
current metals UTS were based solely on HTMR, a technology not
commercially available for many TC metal wastes. Finally, commenters
asserted that individual metal UTS values were not uniformly achievable
when waste streams with multiple toxic metals were being treated. In
light of these concerns, the commenters urged the Agency to obtain
additional data that would demonstrate the effectiveness of
stabilization on TC metal waste streams and more fully characterize the
diversity of treatment of these nonwastewaters. The following
commenters provided the Agency with stabilization performance data:
Battery Council International, American Foundrymen's Association,
Chemical Waste Management, and the Environmental Treatment Council.
While extensive, the data unfortunately was based on composite samples
and could not be used as the basis for treatment standards (see USEPA,
Final Best Demonstrated Available Technology (BDAT) Background Document
for Quality Assurance/Quality Control Procedures and Methodology,
Office of Solid Waste, October 23, 1991 and 62 FR 26041 for a
discussion of grab and composite sampling).
The Agency, however, was convinced that additional data were needed
to further assess the treatment of TC metal nonwastewaters. During
September 1996, EPA conducted site visits at three hazardous waste
treatment facilities and collected additional treatment performance
data. One facility was a large commercial TSDF that employed
conventional stabilization techniques to treat a wide array of
inorganic metal wastes. Another was an on-site treatment facility that
focused on the stabilization of inorganic metal slag. A third facility
was commercial and focused on stabilization of inorganic materials
using non-conventional stabilization techniques. During these site
visits, the Agency either gathered performance data from company
records or requested the collection of actual treatment performance
data through sampling and analysis.
Treatment data were collected for the following types of hazardous
waste: mineral processing waste, baghouse dust, battery slag, soils,
pot solids, recycling by-products, and sludge. See the memorandum,
Final Revised Calculation of Treatment Standards Using Data Obtained
From Rollins Environmental's Highway 36 Commercial Waste Treatment
Facility and GNB's Frisco, Texas Waste Treatment Facility, March 10,
1997 and the memorandum, Transferability of UTS to Mineral Processing
Wastes, January 28, 1997 for a complete description of the waste
constituents and concentrations. Most of the wastes contained multiple
metals in various concentrations while some had
[[Page 28561]]
significant concentrations of typically two metal combinations,
including lead and cadmium, barium and lead, and chromium and antimony.
In addition, between October 1994 and December 1995, the Agency
obtained performance data from one HTMR facility; (other HTMR data
became available very late in 1997). The assessment of the new data
sets began with the calculation of treatment standards for each of the
two data sets representing stabilization and HTMR. The same
methodology, sometimes called ``C 99,'' and used in past LDR
rulemakings, was used to calculate the treatment levels (see 56 FR
41164, August 18, 1991, and the BDAT Background Document for K061,
dated August, 1991). Next, the Agency compared the treatment levels for
stabilization verses HTMR. Based on this comparison, the Agency
selected the highest level for each metal as the proposed UTS to allow
for waste and process variability and detection limit difficulties.
This approach is consistent with the legislative goal of providing
substantial treatment through standards that are achievable by an array
of well-performing, available treatment technologies. See 130 Cong.
Rec. S 9184 (Daily ed., July 25, 1984) (statement of Senator Chafee).
As a result, the Agency issued a Second Supplemental Proposal on
May 12, 1997 (62 FR 26041). In it, EPA proposed to change the numerical
limits for all nonwastewater wastes containing the following metal
constituents: antimony, barium, beryllium, cadmium, chromium, lead,
nickel, selenium, silver, and thallium. (62 FR at 26047, May 12, 1997).
The Agency also reproposed to change the numerical limits for vanadium
in P119 and P120 nonwastewaters, and for zinc in K061 nonwastewaters.
(62 FR at 26047, May 12, 1997). EPA also proposed these same UTS
treatment standards for TC metal wastes identified as hazardous due to
concentrations of barium, cadmium, chromium, lead, selenium and silver.
The Agency would like to correct in today's rule a prior error that
was discovered in calculating the metals treatment levels using the
HTMR treatment data. As previously stated, in the Second Supplemental
and in today's preamble, in determining the treatment levels for each
metal constituent, the Agency compared the treatment standards
calculated with data from HTMR and stabilization. Based on this
comparison, the highest level for each metal was chosen as the
treatment standard. In reviewing the calculations from the HTMR data
set, the Agency discovered an error in the calculations. When applying
the methodology presented in USEPA, ``Final Best Demonstrated
Technology (BDAT) Background Document for Quality Assurance/Quality
Control Procedures and Methodology,'' dated October 23, 1991, it was
discovered that the Agency failed to conduct a ``Z-score test'' to
remove any outliers--data that is either so high or so low that it is
not considered to be representative of the population from which the
data are drawn. EPA uses this statistical method to confirm that
certain data do not represent treatment by a well-operated system, or
reflect anomalously low levels which are not typically achievable. This
error was found to have occurred only in the calculation of the
treatment standards based on the performance of HTMR; the treatment
standards based on the performance of stabilization were properly
calculated. The proposed treatment standards for cadmium, chromium,
nickel, and silver were affected. The application of the Z-score
outlier test resulted in 2 data points out of 40 being eliminated as
outliers for both cadmium and chromium. For nickel, 5 out of 122 data
points were identified as outliers.
For silver, 3 out of 114 data points were identified as outliers.
Three of the resulting, calculated treatment standards changed slightly
and are slightly more stringent than the proposed standards: cadmium
from proposed 0.20 to corrected 0.11 mg/L TCLP; chromium from proposed
0.85 to corrected 0.60 mg/L TCLP; and nickel from proposed 13.6 to
corrected 11 mg/L TCLP. Silver, on the other hand, changed from the
proposed 0.11 mg/L TCLP to a corrected, slightly less stringent 0.14
mg/L TCLP. (Note: In re-calculating this standard, the Agency added an
additional 74 data points which were submitted by the INMETCO Company
(a high temperature metal reclaimer) in their comments to the May 12
supplemental proposal.) The Agency believes that these re-calculations
are not significant because these four revised standards are each still
achievable. See Memorandum, ``Calculation of Universal Treatment
Standard (UTS) for HTMR Residues Using Data Submitted by Horsehead
Research Development (HRD) Co., Inc. And INMETCO,'' December 17, 1997.
B. Applicability of Metal Treatment Standards
As noted earlier, today's rule finalizes LDR treatment standards in
two ways. First, it revises the UTS levels for 10 metal constituents in
nonwastewater forms of hazardous wastes. The 10 include antimony,
barium, beryllium, cadmium, chromium, lead, nickel, selenium, silver,
and thallium. These treatment standards will replace the existing UTS
values. In addition, EPA is applying UTS for the first time to 8 TC
metal wastes: arsenic, barium, cadmium, chromium, lead, mercury,
selenium, and silver. The UTS apply to both wastewater and
nonwastewater forms of the wastes (except for TC arsenic wastes, for
which the UTS apply to wastewater forms only), and to both organic and
metal underlying hazardous constituents in them. No TC metal wastes
have had to meet standards for underlying hazardous constituents before
today, and wastes exhibiting only the TC and not the EP were not yet
prohibited. (Note, some subcategories of mercury and arsenic TC metal
wastes have treatment methods requiring use of a specified technology,
and are not affected by today's rule.) The Agency is also adjusting the
treatment standards for vanadium in P019 and P020 nonwastewaters as
well as zinc in K061 nonwastewaters.
The metal treatment standards being promulgated today have broad
applicability. They apply to the following metal-containing hazardous
wastes: (1) characteristic metal wastes, including both the newly
identified wastes that, heretofore, were not prohibited from land
disposal; and metal wastes that were identified as hazardous under the
predecessor leaching protocol, the Extraction Procedure (EP), which
remain hazardous because they also exhibit the TC by the TCLP; (2)
mineral processing wastes which exhibit the toxicity characteristic for
metal (this is actually a subset of wastes in (1) above); (3) listed
hazardous wastes which have metal constituents; (4) underlying
hazardous constituents (UHCs) that are metals in any characteristic
hazardous waste (including mineral processing waste which exhibit a
characteristic) that is disposed in other than a Clean Water Act (CWA)
or CWA-equivalent wastewater treatment system (see 40 CFR 268.2(i); 59
FR 47982, September 19, 1994); and (5) radioactive wastes mixed with
the wastes mentioned in (1)-(4) above.
C. Development of New Treatment Standards for Hazardous Wastes
Containing Metals
1. Measuring Compliance by Grab or Composite Sampling
As explained in the May 12, 1997 Second Supplemental Phase IV
proposal, EPA establishes treatment standards using data obtained by
grab sampling, not composite sampling, and
[[Page 28562]]
likewise assesses compliance with these standards using grab sampling.
62 FR at 26047. This approach was sustained by the D.C. Circuit Court
of Appeals in Chemical Waste Management v. EPA, 976 F. 2d at 34, and
EPA did not and is not reopening the issue in this proceeding. The
Agency has now obtained requisite grab sampling data. As a result, the
treatment standards promulgated in this rule are all based upon
treatment performance that was measured through the use of grab
sampling. All compliance likewise will be based on grab sampling.
2. Development of Treatment Standards for Metal Wastes
All of the metals described below are on the UTS list and some are
also TC metals. This section discusses development of both the TC and
UTS treatment standard levels. The Agency is presenting the metal
treatment standards alphabetically by constituent. Depending on the
constituent, one or more treatment standards is discussed. For example
in the section entitled, ``Treatment Standards for Barium Waste,'' the
Agency discusses the promulgation of three treatment standards: (1) 21
mg/L TCLP for nonwastewater forms of D005 waste (based on the UTS); (2)
1.2 mg/L for wastewater forms of D005 waste (also based on the UTS);
and (3) a revised UTS of 21 mg/L TCLP for barium nonwastewaters. If a
metal constituent is not one of the TC metals, its presence cannot be
the basis for determining if a waste exhibits the toxicity
characteristic--but it could be an underlying hazardous constituent in
the waste, in which case that constituent would need to meet the
standard for that metal in today's rule before the waste could be land
disposed.
a. Final Universal Treatment Standard for Nonwastewater Forms of
Antimony. The Agency proposed in the Second Supplemental (62 FR 26041,
May 12, 1997), to change the UTS for nonwastewaters containing antimony
from 2.1 mg/L TCLP to 0.07 mg/L TCLP. This proposed change was a result
of new data collection efforts conducted by the Agency to gather
performance data that was representative of the diversity of metal-
containing wastes.
In response, the Agency received several comments. Two commenters
supported the proposed change; however the remaining commenters argued
against the proposed level for antimony of 0.07 mg/L TCLP for a number
of reasons. One commercial waste management facility stated that very
few of the waste streams they treat using conventional stabilization
techniques, including furnace ash, incinerator ash, scrubber brine
sludge, furnace baghouse dust, and stripper rinse waters, would meet
the proposed standard. The commenter submitted 48 data points
supporting its claim. A third commenter stated that meeting the
standard would significantly increase their compliance costs. Another
stated that commercial stabilization techniques were not capable of
meeting the proposed UTS for antimony. In general, these commenters
suggested a higher UTS for antimony in the range of 1.3 mg/L TCLP to
2.98 mg/L TCLP.
In response to the commenters' concerns regarding the difficulty in
treating antimony wastes, the Agency has conducted a thorough review of
its BDAT data set and has determined that while it represents a diverse
collection of waste streams containing metals, the concentration of
antimony in the 9 data points used to calculate the proposed standard
may not be representative of the most difficult to treat antimony
waste. The data used by the Agency to calculate the proposed UTS of
0.07 mg/L TCLP, showed a range of antimony concentrations in the
untreated waste of between 0.2440 mg/L TCLP and 16.1 mg/L TCLP. While
the Agency, at the time, believed that these data were sufficient to
establish a treatment standard, new data submitted by a commercial
hazardous waste treatment facility provide a compelling argument to
amend this standard. The new data consist of 48 additional data points
representing various multiple metal waste streams, including
incinerator or furnace ash, scrubber brine sludge, lab pack waste,
stripper rinse water and baghouse dust. These wastes have all been
treated with conventional stabilization techniques and meet the
proposed UTS values for all metal constituents except for antimony. The
Agency has reviewed the data, the treatment technology, and the QA/QC
information submitted by the commenter and believes that the data
should be incorporated into the existing BDAT data set. After doing so,
the Agency recalculated the treatment standard for antimony
nonwastewaters and is today promulgating a revised standard of 1.15 mg/
L TCLP. All data available to the Agency indicate that the revised
treatment standard for antimony nonwastewaters can be achieved by
either stabilization or HTMR processes and addresses the commenter's
concerns.
b. Treatment Standard for Wastewater Forms of Arsenic Waste.The
Agency proposed in the original Phase IV proposal (60 FR 43683, August
22, 1995), to change the treatment standard for wastewater forms of
toxicity characteristic arsenic (D004) waste from the characteristic
level of 5.0 mg/L established in the Third Third rule (55 FR 22520 June
1, 1990) to the previously promulgated UTS for arsenic wastewaters of
1.4 mg/L. The Agency did not propose to change the treatment standard
for nonwastewater forms of toxicity characteristic arsenic (D004) waste
in that the UTS of 5.0 mg/L TCLP was the same as the TC level. The
Agency received no comment on the proposed change to D004 wastewaters.
Therefore, the Agency is today promulgating as proposed the UTS
standard of 1.4 mg/L for D004 wastewaters.
c. Treatment Standards for Barium Waste. (i) Treatment standards
for TC Barium (D005) Waste. In 60 FR 43684 (August 22, 1995), EPA
proposed to change the treatment standards for wastewater forms of TC
metal barium waste (D005) from the characteristic level of 100 mg/L
(established in the Third Third rule, 55 FR 22520, June 1, 1990) to the
previously promulgated UTS for barium of 1.2 mg/L. Likewise, EPA
proposed for D005 nonwastewaters a change from the characteristic level
of 100 mg/L TCLP (55 FR 22520, June 1, 1990) to the previously
promulgated UTS of 7.6 mg/L TCLP. In support of these revised treatment
standards, the Agency had performed a comprehensive re-evaluation of
the available treatment performance data from wastes containing
significant concentrations of barium.
For D005 wastewaters, the Agency determined that the existing UTS
level for barium (1.2 mg/L) was appropriate, based on the performance
of lime conditioning followed by sedimentation and filtration as BDAT.
For D005 nonwastewaters, the Agency determined that the existing UTS
level of 7.6 mg/L TCLP, based on treatment of barium in K061 (electric
arc furnace dust) using HTMR was also appropriate. The Agency believed
that these treatment standards could be routinely met by industry.
Additionally, the Agency reviewed stabilization data and determined
that the treatment standards for barium could be achieved by
stabilization for a wide variety of waste matrices. (See Proposed Best
Demonstrated Available Technology (BDAT) Background Document for
Toxicity Characteristic Metal Wastes D004-D011, July 26, 1995.)
The Agency received no significant comment on the proposed change
to the wastewater standard for D005. However, as previously discussed
in Section III.A of today's rule, new data collection efforts and new
analysis of BDAT data
[[Page 28563]]
for nonwastewaters resulted in a reproposal of the barium treatment
standard in the Phase IV Second Supplement (62 FR 26047) . In this
notice, the Agency proposed to revise the treatment standard for barium
nonwastewaters to 21 mg/L TCLP based on stabilization. The Agency
received no comments in response to the reproposal. Therefore, the
Agency today is promulgating a nonwastewater treatment standard of 21
mg/L TCLP as proposed in 62 FR 26041. In addition, the treatment
standard of 1.2 mg/L for wastewater forms of D005 is promulgated as
proposed in 60 FR 43654.
(ii) Universal Treatment Standard (UTS) for Barium Nonwastewaters.
(Please refer to the discussion above about the development of the
treatment standard for D005 for additional information on the
development of the barium UTS levels.) The Agency proposed to change
the UTS for barium nonwastewaters from 7.6 mg/L to 21 mg/L TCLP (see 62
FR 26041). It was proposed that such a treatment standard would better
reflect the diversity of metal-containing waste streams and their
treatment.
The Agency received no significant comment in response to the
reproposal. Therefore, the Agency is today promulgating a nonwastewater
UTS of 21 mg/L TCLP, as proposed.
d. Final Universal Treatment Standard for Nonwastewater Forms of
Beryllium Waste. The Agency proposed in the original Phase IV proposal
(60 FR 43683, August 22, 1995), to revise the UTS for nonwastewaters
containing beryllium from 0.014 mg/L TCLP to 0.04 mg/L TCLP. As
previously discussed, new data collection efforts and new analysis of
BDAT data resulted in a reproposal of the beryllium treatment standard
to 0.02 mg/L TCLP in the Phase IV Second Supplemental (62 FR 26041, May
12, 1997).
The Agency received numerous comments on the proposed revision. One
commenter supported the proposed treatment level for beryllium, but
stated that current stabilization technologies could achieve lower
treatment levels. Several other commenters stated that while the
proposed standard for beryllium was consistent with the data considered
by the Agency, the stabilization data for beryllium were quite limited
and reflected the treatment of wastes having very low beryllium
content. Commenters further questioned whether the proposed standard of
0.02 mg/L TCLP could be met by conventional stabilization techniques if
higher concentrations of beryllium were treated. Other commenters
stated that they could not support the treatment standards because EPA
has not demonstrated that existing commercial technologies were capable
of achieving the proposed standards or that technologies were otherwise
available.
In light of the comments received, the Agency conducted a review of
the data set used to calculate the proposed standard. The review
indicated that, consistent with the commenter's concerns, the data used
by the Agency to calculate the standard were based on wastes containing
low concentrations of beryllium (between 0.0050 and 0.5 mg/L TCLP).
These concentration levels and the subsequent treatment standard
developed from them does not appear to adequately account for the
difficulty in treating wastes containing higher concentrations of
beryllium. Data generated and submitted by Brush Wellman, Inc.,
consisting of seven data points, showed characteristic wastes (D008)
with concentrations of beryllium ranging from 32 to 95 mg/L TCLP. When
treated with conventional stabilization techniques, treatment resulted
in beryllium levels ranging from 0.05 mg/L to 0.31 mg/L TCLP. As a
result of these data, the proposed UTS for beryllium must be revised to
reflect a more difficult-to-treat or high-concentration beryllium
waste. Accordingly, the Agency is today promulgating a revised UTS for
beryllium nonwastewaters of 1.22 mg/L based on this newly acquired
data. All treatment performance data available to the Agency indicates
that this revised treatment standard can be met, thereby addressing
concerns raised by the commenters to the proposal. It should be noted
that the UTS for beryllium wastewaters remains unchanged at 0.82 mg/L.
e. Treatment Standards for Cadmium Wastes. (i) Treatment standards
for TC Cadmium (D006) Waste. The Agency proposed to change the
treatment standards for wastewater forms of TC cadmium (D006) waste
from the characteristic level of 1.0 mg/L (established in the Third
Third rule (55 FR 22520. June 1, 1990) to the previously promulgated
UTS for cadmium wastewaters of 0.69 mg/L. EPA also proposed to change
the treatment standard for D006 nonwastewaters from the characteristic
level of 1.0 mg/L TCLP (55 FR 22520 (June 1,1990)) to the previously
promulgated UTS for cadmium nonwastewaters of 0.19 mg/L TCLP. In
support of these revised treatment standards, the Agency had performed
a comprehensive re-evaluation of the available treatment performance
data from wastes containing significant concentrations of cadmium.
For D006 wastewaters, the Agency determined that the existing UTS
for cadmium (0.69 mg/L) based on a BDAT of lime conditioning followed
by sedimentation was appropriate. The treatment standard for
nonwastewater forms of D006 wastes was based on a transfer from the UTS
for cadmium of 0.19 mg/L TCLP based on the K061-HTMR treatment standard
data. The Agency chose to use these data because they represented
performance of an HTMR treatment unit. The UTS based on K061-HTMR could
be routinely met by industry. Additionally the Agency reviewed
stabilization performance data and determined that the UTS for cadmium
could be achieved by stabilization for a wide variety of waste
matrices. See Proposed Best Demonstrated Available Technology (BDAT)
Background Document for Toxicity Characteristic Metal Waste D004-D011 (
July 26, 1995).
The Agency received no comments on the proposed change to the
wastewater standard for D006. However, for reasons previously discussed
in Section III.A of today's preamble, the Agency in the Phase IV Second
Supplemental proposed to revise the treatment standard for cadmium
nonwastewaters to 0.20 mg/L TCLP based on HTMR.
All comments received in response to the revised standard for
cadmium supported the change. However, as discussed earlier in Section
III.A of today's preamble, the Agency discovered an error in the
calculation of the treatment standard. In applying the LDR methodology
for calculating a treatment standard, the Agency failed to conduct a
``Z-score'' outlier test. With the application of this test, 2 out of
the 40 data points were determined to be outliers, resulting in a
revised treatment standard for cadmium nonwastewaters of 0.11 mg/L
TCLP. (The proposed treatment standard of 0.20 mg/L TCLP was based on
all 40 data points.) The Agency has reviewed the comments in light of
this amended treatment standard and believes that it can be achieved by
both HTMR and stabilization treatment. Data submitted by commenters in
support of this rule does clearly indicate that the standard can be
achieved. See supporting information contained in docket for this rule.
Therefore, the Agency is today promulgating a nonwastewater treatment
standard of 0.11 mg/L TCLP for D006. In addition, the treatment
standard of 0.69 mg/L for wastewater forms of D006 waste is being
promulgated as proposed in 60 FR 43654.
[[Page 28564]]
(ii) Universal Treatment Standard (UTS) for Nonwastewaters
Containing Cadmium. The reader is referred to the above discussion
about the development of the treatment standard for D006 nonwastewaters
for additional information of the development of the UTS level for
cadmium nonwastewaters. EPA is promulgating an UTS of 0.11 mg/L TCLP
for nonwastewaters containing cadmium. No change was proposed for the
cadmium wastewater UTS; therefore it remains at 0.69 mg/L.
f. Treatment Standards for Chromium Wastes. (i) Treatment Standards
for TC Chromium Wastes (D007). In 60 FR 43654 (August 22, 1995), the
Agency proposed to change the treatment standards for wastewater forms
of toxicity characteristic chromium (D007) waste from the
characteristic level of 5.0 mg/L (established in the Third Third rule
(55 FR 22520. June 1, 1990) to the previously promulgated UTS for
chromium (total) wastewaters of 2.77 mg/L. EPA also proposed to change
the treatment standards for D007 nonwastewaters from the characteristic
level of 5.0 mg/L TCLP (55 FR 22520, June 1,1990) (a standard remanded
by the D.C. Circuit as insufficiently stringent in Chemical Waste
Management v. EPA, 976 F. 2d at 32) to the previously promulgated UTS
for nonwastewater forms of chromium (total) of 0.86 mg/L TCLP. In
support of these revised standards, the Agency had performed a
comprehensive re-evaluation of the available treatment performance data
from wastes containing significant concentrations of chromium.
For D007 wastewaters, the Agency determined that the existing UTS
(2.77 mg/L) based on a BDAT of lime conditioning followed by
sedimentation was appropriate. The treatment standard for D007
nonwastewaters was based on a transfer from the UTS for chromium
(total) of 0.86 mg/L TCLP based on the K061-HTMR treatment standard
data. In addition, the Agency reviewed stabilization performance data
and determined that the UTS for chromium (total) could be achieved by
stabilization for a wide variety of waste matrices. See Proposed Best
Demonstrated Available Technology (BDAT) Background Document for
Toxicity Characteristic Wastes D004-D011, July 26, 1995.
The Agency received no comments on the proposed change to the
wastewater standard for D007. However, as previously discussed in
Section III.A of today's preamble, new data collection efforts and
further analysis of BDAT data, resulted in a proposed revision to the
treatment standard for nonwastewater containing chromium to 0.85 mg/L
TCLP based on a BDAT of stabilization (62 FR 26041).
In response to the reproposal, the Agency received no significant
comments. However, as discussed earlier in Section III.A of today's
preamble, the Agency discovered an error in the calculation of the
treatment standard. In applying the LDR methodology for calculating a
treatment standard, the Agency failed to conduct a ``Z-score'' outlier
test. With the application of this test, 2 out of the 40 data points,
originally used to calculate the standard, were determined to be
outliers, resulting in a revised treatment standard for chromium
nonwastewaters of 0.60 mg/L TCLP. The Agency has reviewed the comments
in light of this amended standard and believes that it can be achieved
by both HTMR and stabilization technologies. Data submitted by
commenters in response to this proposal also support this conclusion.
See supporting information contained in the docket for this rule.
Therefore, the Agency is today promulgating an amended nonwastewater
treatment standard of 0.60 mg/L TCLP. In addition, EPA is also
promulgating a treatment standard of 2.77 mg/L for wastewater forms of
D007 as proposed in 60 FR 43654.
(ii) Universal Treatment Standard (UTS) for Chromium
Nonwastewaters. (Please refer to the discussion above about the
development of the treatment standard for D007 for additional
information on the development of the chromium UTS levels.) The Agency
proposed to change the UTS for chromium (total) nonwastewaters to 0.85
mg/L TCLP to better reflect the diversity of metal-containing waste
streams and their treatment (see 62 FR 26041). No change was proposed
for the chromium wastewater UTS.
The Agency received no significant comments on the reproposal.
However, as a result of an error in the calculation of the proposed
treatment standard, as previously discussed, the Agency is today
promulgating a revised chromium nonwastewater UTS of 0.60 mg/L TCLP.
The chromium wastewater UTS remains unchanged at 2.77 mg/L.
g. Final Treatment Standards for Lead Wastes. (i) Treatment
standards for TC Lead Wastes (D008). In 60 FR 43654 (August 22, 1995),
the Agency proposed to change the treatment standards for wastewater
forms of toxicity characteristic lead (D008) waste from the
characteristic level of 5.0 mg/L established in the Third Third rule
(55 FR 22520, June 1, 1990) to the previously promulgated UTS for lead
wastewaters of 0.69 mg/L. EPA also proposed to change the treatment
standard for D008 nonwastewaters from the characteristic level of 5.0
mg/L TCLP (55 FR 22520, June 1, 1990) (a standard remanded by the D.C.
Circuit as insufficiently stringent in Chemical Waste Management v.
EPA, 976 F. 2d at 27) to the previously promulgated UTS for lead
nonwastewaters of 0.37 mg/L TCLP. In support of these revised treatment
standards, the Agency had performed a comprehensive re-evaluation of
the available treatment performance data from wastes containing
significant concentrations of lead.
For D008 wastewaters, the Agency determined that the existing UTS
for lead (0.69 mg/L) based on a BDAT of lime conditioning followed by
sedimentation was appropriate. The treatment standard for nonwastewater
forms of D008 waste was based on a transfer from the UTS for lead of
0.37 mg/L TCLP, which in turn, was based on K061-HTMR treatment
standard data. The Agency believed that the UTS could be routinely met
by industry using HTMR. Additionally, the Agency reviewed stabilization
performance data and determined that the UTS for lead could also be
achieved by stabilization for a wide variety of waste matrices. See
Proposed Best Demonstrated Available Technology (BDAT) Background
Document for Toxicity Characteristic Metal Wastes D004-D011, July 26,
1995.
The Agency did not receive any comments on the proposed change for
D008 wastewaters. However as previously discussed in today's preamble,
numerous comments on the proposed nonwastewater treatment standard were
submitted. As a result, the Agency in the Phase IV Second Supplemental
proposed to change the D008 nonwastewater standard to 0.75 mg/L TCLP
based on new BDAT stabilization data (62 FR 26047) collected by the
Agency. The Agency felt that these data better reflected the diversity
of lead-containing waste streams and their treatment.
Numerous commenters concurred with the Agency's reproposal.
However, other commenters, specifically those representing various
sectors of the secondary lead industry, argued that EPA's proposed
treatment standard for lead was not achievable. In particular, comments
from Battery Council International (BCI) and the Association of Battery
Recyclers (ABR) argued that new data developed by their association
members showed that no facility in the secondary lead industry could
meet EPA's proposed treatment standard for lead. Instead, they
supported setting a treatment standard of 8.39 mg/L TCLP for D008
nonwastewaters based on
[[Page 28565]]
stabilization. The commenters argued that smelter slag has chemical and
physical characteristics distinctly different from the wastes used to
develop the treatment standard and that because of its physical
variability, treatment of secondary smelter slag through stabilization
was much less effective than other types of D008 wastes. The commenter
further questioned EPA's decision to ignore data submitted by BCI, ABR
and others in response to the original Phase IV proposal, stating that
these data were much more comprehensive and representative. The
commenter stated that these data contained 276 composite data points
for lead from secondary smelter slag, with a 99th percentile confidence
interval for stabilized slag of 2.97 mg/L TCLP. Another commenter,
which uses a chemical fixation process on the generated blast furnace
slag, argued that they could only meet a 2.0 mg/L TCLP for lead, based
on composite rather than grab sampling.
In response to the commenters' concerns, the Agency would first
like to respond to the commenters' statement that data previously
submitted to the Agency was ignored. The Agency is careful to review
and analyze all data that are submitted in support or response to its
rulemakings. In fact, the referenced data were analyzed extensively,
but were found to be so seriously lacking in form and quality
assurance/quality control prerequisites that it was impossible to use
them for BDAT development. (In the docket for this rule see the
documents, ``Draft--Overview of Five Data Sets Submitted in Response to
the Land Disposal Restrictions Phase IV Proposed Rule: Treatment of
Metals,'' November 1996; and correspondence from Michael Petruska,
USEPA to David B. Weinberg, Battery Council International Re: Request
for Additional Data in Support of the Previous Submitted Data in
Response to the Land Disposal Restriction Phase IV,'' July 22, 1996).
Specifically, the data submitted to the Agency were (1) based on
composite samples rather than grab samples, the latter being the only
type used to develop treatment standards; (2) lacking in any quality
assurance/quality control (QA/QC) documentation; and (3) not
accompanied with specific treatment information, or any indication that
performance of the treatment process was in fact optimized. As such,
the Agency was unable to utilize these data.
Other additional data were subsequently submitted by the commenter
in response to the ``Second Supplemental'' and analyzed by the Agency.
These data were based on grab sampling, but there were no specifics on
the type of stabilization treatment conducted on the waste. The data
does indicate that secondary smelter slags can be treated to meet
today's treatment standards for all metals except lead and thallium.
With respect to lead, approximately 24 out of 83 samples have treated
lead values greater than 0.75 mg/L TCLP, but less than the
characteristic level of 5.0 mg/L TCLP. No information was provided for
the majority of the thallium data sets. Based on these data, the
commenter proposed a treatment standard of 8.39 mg/L TCLP for lead
nonwastewaters and 0.79 mg/L TCLP for thallium nonwastewaters. However,
these data failed to show effective treatment of the thallium and lead
constituents. (In the docket for this rule, see memorandum to Nick
Vizzone, USEPA from Howard Finkel of ICF, ``Calculation of Universal
Treatment Standard (UTS) for Stabilized Secondary Lead Slag Using Data
Submitted by the Battery Council International and Association of
Battery Recyclers,'' December 5, 1997).
Commenters have failed to provide reliable and convincing data or
information to persuade the Agency that stabilization can not meet the
proposed treatment standard of 0.75 mg/L TCLP for lead slags. While the
physical variability of the slag may indeed affect treatment
performance, the Agency is unconvinced that the commenter's data were
the result of optimized treatment conditions and, therefore, are not
indicative of true treatment difficulties. EPA's own performance data
from treatment of D008 battery slags (which were used in part for the
calculation of the treatment standard) clearly support the view that
slags from secondary battery recyclers can be treated to meet the
nonwastewater standard of 0.75 mg/L TCLP. These data indicate that
slags with lead concentrations ranging from 5 to 846 mg/L TCLP (a range
similar to that associated with the data submitted in response to the
May 12 Second Supplemental proposal and which are discussed above) can
be treated with stabilization techniques to levels less than 0.01 mg/L
to 0.3 mg/L TCLP. Furthermore, data and information available to the
Agency suggest that with optimized treatment these standards should be
achievable regardless of the waste matrix. (See ``Treatment Technology
Background Document'', January 1991, for a discussion of Waste
Characteristics Affecting Performance (WCAPS and other pertinent
material). As such, the Agency is unpersuaded by the commenter's
arguments and is today promulgating as proposed a treatment standard of
0.75 mg/L TCLP for D008 nonwastewaters and a standard of 0.69 mg/L for
D008 wastewaters. The Agency notes that if a particular waste is unique
or possesses properties making it unusually difficult to treat by the
treatment technologies whose performance was used to develop the
treatment standard, the affected party may petition the Agency, on a
case-by-case basis, for a treatment variance as provided in 40 CFR
268.44.
(ii) Final Universal Treatment Standard (UTS) for Nonwastewaters
Containing Lead. (Please refer to the discussion above about the
development of the treatment standard for D008 for additional
information on the development of the lead UTS levels.) The Agency
proposed to change the UTS for lead nonwastewaters from 0.37 mg/L TCLP
to 0.75 mg/L TCLP to better reflect the diversity of metal-containing
waste streams and their treatment (see 62 FR 26041). In response to the
proposed revision, the Agency did receive a number of comments on the
nonwastewater level, discussed above. For reasons also discussed above,
the Agency is today promulgating a lead nonwastewater UTS of 0.75 mg/L
TCLP as proposed.
(iii) Secondary Smelter Battery Slag--Additional Issue. EPA
published a Notice of Data Availability (NODA) on May 10, 1996 (61 FR
21419) that discussed, among other things, an issue regarding
application of the LDR standards to slags resulting from the smelting
of lead acid batteries. The LDR treatment standard, established in the
Third Third Rule in 1990, for lead acid batteries is RLEAD (see 40 CFR
268.40 and 268.42, Table 1), which means recovery of lead. The NODA
stated that ``[o]nce the batteries are smelted, the LDR requirements
have been satisfied, and, therefore, the slag resulting from this
smelting need not be treated further. The standards proposed under
Phase IV (i.e., compliance with UTS) would not apply to this slag, even
if the slag exhibits a characteristic of hazardous waste (i.e.,
contains lead in amounts greater than 5.0 mg/L).'' This position was
based on EPA's usual interpretation that ``when EPA specifies a
treatment method as the treatment standard, residues resulting from the
required treatment method are no longer prohibited from land disposal
unless EPA should otherwise specify.'' (emphasis added) 55 FR at 22538
(June 1, 1990).
After the publication of the May 10, 1996 NODA, EPA realized that
it had, in fact, ``otherwise specified'' that lead slags resulting from
the smelting of lead
[[Page 28566]]
acid batteries would be a separate treatability group in the Third
Third rule, and they would indeed require further treatment if the
slags exceeded the TC for lead (5.0 mg/L) as generated. See 55 FR at
22568 (June 1, 1990). The Third Third rule states that ``The residuals
from the recovery process are a new treatability group (i.e., the
residues are not lead acid batteries) and, therefore, their status as
prohibited or nonprohibited is determined at the point the residues are
generated. Such residues would thus only be prohibited and therefore
require further treatment if they exhibit a characteristic.'' This
point was clarified both in person and in a letter, dated July 31,
1996, sent to representatives of Battery Council International. The
letter explained that the Agency had mischaracterized the status of
lead slags in the May 10, 1996 NODA and requested comment on the
appropriate treatment standard for these lead slags.
EPA published the Phase IV Second Supplemental Proposed Rule on May
12, 1997, and among other things, used new data from the treatment of
lead slags in revising the treatment standards for lead. In response to
this issue, one commenter stated that EPA was prohibited under RCRA
3004(m) from requiring further treatment for residuals that resulted
from a treatment process that was determined to be BDAT (such as
RLEAD). The commenter believes RCRA 3004(m) states that once threats
are minimized, EPA cannot require further treatment of the residuals
after the specified BDAT treatment has been performed on the waste, or
the BDAT numerical level has been achieved. Because the Agency's data
on lead slag residuals show concentrations of 283 mg/L TCLP lead are
not uncommon, potential threats from treated lead slag (using RLEAD
only) are clearly not minimized. In fact, the concentrations of lead in
these residuals resulting from RLEAD of lead acid batteries are among
the most concentrated TC lead wastes for which the Agency has data. The
Agency only is requiring further treatment of slag residuals which
exhibit the characteristic for lead (i.e., contain lead in amounts
greater than the TC level of 5.0 mg/l). Those residuals, by definition,
are still hazardous and potential threats posed by their land disposal
have not been minimized.
Another commenter raised the issue of whether there had been
adequate notice and comment given regarding the status of lead slag
residuals. The Agency believes that adequate notice and opportunity to
comment were given in light of the facts recited. We note also that all
comments received on the Phase IV second supplemental rule regarding
lead slag residuals took issue with the treatment standard for lead and
the data used to develop the standard, but did not question that the
slags could be required to be treated further. Commenters appeared to
clearly understand that slags are covered by the Phase IV rule
establishing standards for TC lead wastes.
Therefore, lead slag residuals resulting from the smelting of lead
acid batteries are included under today's rulemaking. If such residuals
exhibit a lead toxicity characteristic (i.e., have lead levels
exceeding 5.0 mg/L) after RLEAD is employed, they would have to be
treated again for lead and any other underlying hazardous constituents
present in waste until the treatment standards are achieved. For a
discussion on the development of these numerical standards being
promulgated today; see the discussion in section (i) above.
(iv) Addition of Iron Filings to Stabilize Lead-Containing Wastes.
Today, the Agency is codifying the principle that the addition of iron
metal, in the form of fines, filings, or dust, for the purpose of
ostensibly achieving a treatment standard for lead is ``impermissible
dilution'' under 40 CFR 268.3. The Agency has determined that this
waste management practice does not minimize threats posed by land
disposal of lead-containing hazardous waste because the practice
essentially ``blinds'' the analytic method but would not in fact
prevent lead from leaching under actual disposal conditions. Affected
wastes include: toxic characteristic lead wastes (D008), any
characteristic waste containing lead as an underlying hazardous
constituent, and listed wastes for which lead is regulated.
On March 2, 1995, EPA published the LDR Phase III proposal (60 FR
11702). Among other things EPA proposed that the addition of iron dust
to stabilize lead in characteristic hazardous waste constituted
impermissible dilution, rather than treatment legitimately meeting the
LDR treatment standards (60 FR 11731). In the proposal, the Agency
stated that certain industries were adding iron dust or iron fines to
some characteristic hazardous waste (nonwastewaters) as an ostensible
form of treatment for lead. As an example, the Agency noted that
foundries were known to mix iron dust or filings with the D008 sand
generated from their spent casting molds, viewing this practice as a
form of stabilization. In the proposal, the Agency stated that such
stabilization practices were inadequate to minimize threats posed by
land disposal of metal-containing hazardous waste, and proposed to
clarify that waste management practice as ``impermissible dilution''
under 40 CFR 268.3.
In response to the proposal, the Agency received numerous comments.
Commenters in support of the ``impermissible dilution'' designation
agreed with EPA's discussion in the preamble that no chemical or
pozzolanic reaction was possible from iron dust or filings and that
standard chemistry showed that metals such as lead were not bound in a
non-leachable matrix when using iron dust or filings as a stabilizing
agent. One commenter further mentioned many instances where generators
have avoided treatment costs by adding iron to their metal and cyanide-
bearing waste streams, thus providing the short-term ability to, as the
commenter stated, ``fool'' the test for both amenable cyanide and
leachable metals. The commenter pointed out that EPA's adoption of a
total cyanide treatment standard had essentially solved the issue of
ineffective treatment of cyanide using iron, but the issue of metals
treatment still remained. The commenter concluded that the prohibition
on the use of iron dust and filings would promote more treatment of
toxic metal-bearing wastes.
Other commenters discussed analytical concerns with the TCLP test
when used on iron-treated wastes. One commenter stated that the
addition of iron to D008 waste sand may mask the presence of lead in
two ways: first, iron is more easily oxidized than lead so that under
the conditions of the TCLP test, iron may be preferentially leached out
into solution, leaving the lead in an insoluble, undetectable state. A
second problem with the presence of iron in the TCLP test is spectral
interference with the analysis of lead, which could result in positive
interference and a raised detection limit for lead.
Numerous commenters representing the foundry industry, however,
argued extensively against the ``impermissible dilution'' designation
for iron treatment of characteristic metal wastes. The commenters
stated that EPA's position was neither justified nor supported by any
technical documentation. The commenters further stated that: (1) iron
added to lead bearing waste foundry sand effectively immobilizes the
lead and yields a treatment residue that consistently passes the TCLP;
(2) TCLP tests, run on foundry sand that was treated with iron and
landfilled 8-10 years ago, yielded lead results below the 5 ppm level;
(3) analytical results for total iron from landfill samples clearly
show the iron has not oxidized after
[[Page 28567]]
several years; and (4) iron treatment has long-term stability. The
commenters further stated that no evidence either from leaching tests
or from real-world experience showed that iron treatment is not a
successful long-term treatment for brass foundry sand when the
treatment is conducted in an appropriate manner. On March 5, 1997, the
Agency addressed the issue and industry arguments in Land Disposal
Restriction--Phase IV Treatment Standards for Characteristic Metal
Wastes; Notice of Data Availability (NODA) (62 FR 10004). In this NODA,
new studies and data were presented on the issue of the treatment
adequacy of adding iron to characteristic metal wastes as a method of
treatment. As explained in the Phase III proposed rule (60 FR 11702),
and again in the NODA of March 5, 1997, the addition of iron seems to
temporarily retard the leachability of lead in spent foundry sand, thus
allowing the waste to pass the TCLP test, but not to be permanently
treated. At the time of the Phase III final rule, EPA decided not to
finalize a determination that the practice was a form of impermissible
dilution in the Phase III final rule without studying the issue
further. See 61 FR 15569, April 8, 1996. In the March 5, 1997 NODA, two
studies were noticed that had recently been completed.
One study was developed by Dr. John Drexler of the University of
Colorado and the other by Dr. Douglas Kendall of the National
Enforcement Investigation Center (NEIC). The results of these studies
indicated that the addition of iron filings or iron dust to spent
foundry sands (D008) did not constitute adequate treatment of the waste
because high concentrations of lead remained available to the
environment and indeed have been shown to leach in actual field testing
of units receiving the spent foundry wastes. (The reader is referred to
62 FR 10004, March 5, 1997 for a full discussion of the studies).
Specifically, Dr. Drexler's study concluded: (1) the spent foundry
wastes placed in Nacodoches Municipal Landfill remained hazardous; (2)
the addition of iron filings to spent foundry sand does not cause
chemical reduction (i.e., the hazardous lead remains oxidized); (3) the
addition of iron filings to the spent foundry sand promoted a
physicochemical dilution of the sample during the TCLP by producing
significant increases in surface area sorption sites; (4) the addition
of iron filings to the waste artificially altered the environmental
character of the TCLP test by increasing pH and lowering Eh (redox
potential) and DO (dissolved oxygen); and (5) in-vitro testing shows
that these ``treated'' wastes maintain a high bioavailability of lead.
Dr. Kendall's study concluded that the addition of iron is not a
permanent way to treat lead-contaminated waste. Specifically, he
concluded that: (1) no reaction occurs when metallic iron is mixed with
lead-contaminated foundry sand (D008); (2) during the TCLP process,
lead begins to leach into the solution and if metallic iron is present,
the lead concentration in solution will decrease by an oxidation/
reduction reaction to levels below the lead characteristic; (3) only if
fresh metallic iron is regularly introduced into the mixture, can
soluble lead be kept at low levels; and (4) upon placement of the waste
in a landfill and left alone, the iron will oxidize, losing its ability
to reduce lead ions.
Peer review of the studies concurred with the findings that the
addition of iron filings to spent foundry sand is not treatment of
hazardous waste and that the scientific data presented in the studies
were based on sound scientific research and support the conclusions
made. (See ``Peer Review Report, September 3, 1996, submitted by A.T.
Kearney, Inc., Dallas, Texas to Rena McClurg, Regional Project Officer,
USEPA, Dallas, Texas.)
The Agency received several comments in response to the NODA. One
State agency commented that based on the evidence gathered by the EPA,
the addition of iron fines as treatment of lead containing wastes
appears to be unacceptable under most disposal criteria. Furthermore,
it was the commenter's contention that the method in question should be
rejected where disposal of wastes so treated may be subjected to acid
leaching and chemical oxidation, in particular disposing of wastes in a
municipal solid waste landfill. The commenter did note however that
data exist to support the contention that the treatment may be
acceptable for brass foundries under specified monofill disposal
criteria. Another commenter requested clarification as to whether iron-
bearing lead waste products, i.e., from the steel bridge blast cleaning
and painting industry, would be impacted. The commenter recommended
that all waste debris from any lead abatement project be deemed
hazardous and treated appropriately regardless of the type of abrasive
blast media used.
Two commenters argued that the conclusions drawn from the studies
conducted by Drs. Kendall and Drexler were erroneous or misplaced from
a regulatory standpoint. In particular the commenters argued, among
other things, that given the biased sampling, i.e., sampling of only
``hot spots'' in the landfill and disregard for SW-846 statistical
analysis, EPA should reconsider its view on the treatment of foundry
sands with iron filings. (The reader is referred to the ``Comment
Response Document'' for this final rule for a more complete discussion
of the comments received on this issue.)
EPA has evaluated all the comments on the subject studies and on
the issue of iron filings as a treatment method for lead
nonwastewaters. The regulatory issue at hand--and the focus of the
studies--is whether or not adding iron metal is adequate treatment for
LDR purposes. Several commenters have elected to take issue with points
that are not the central focus of the two studies. While a statistical
evaluation is used to determine if a waste is hazardous, all parts of
the waste must be treated to meet the applicable standards, not just a
representative sample. Thus, if results show that ``hot spots'' remain,
this is presumptive evidence that treatment was not effective and there
is noncompliance with the LDR treatment requirements. In the preceding
determination of whether a waste is hazardous, the Agency guidance in
SW-846 provides basic sampling strategies for simple and stratified
random sampling of the waste as a whole. However, in application of the
land disposal treatment standards, all portions of the waste must meet
the applicable treatment standards, i.e., no portion may exceed the
regulatory limit. See 40 CFR 268.40. Hence, commenters that focused on
the SW-846 sampling issue largely misconstrued the central findings of
the studies.
In response to comments pointing to the disposal of a waste in a
monofill, while data may suggest that disposal of iron treated waste in
this type of controlled environment may be protective in some
scenarios, RCRA section 3004(m)(1) requires treatment to substantially
diminish the toxicity of the waste or substantially reduce the
likelihood of migration of hazardous constituents from the waste so
that short-term and long-term threats to human health and the
environment are minimized. This statutory requirement has not been met
with iron addition plus placement in a monofill since ultimate
placement of the waste in a monofill is not germane to the key issue at
hand--is the treatment prior to land placement effective.
With respect to this key issue, the Agency's determination that the
addition of elemental iron in the form of fines, filings, etc.,
constitutes impermissible dilution is predicated on the fact that the
adsorption of soluble
[[Page 28568]]
lead on to the iron surface is a reversible reaction and once the iron
surfaces oxidize (which naturally occurs when the treated waste is
exposed to air), the ability of the additive (iron) to scavenge soluble
metals is diminished. Therefore, the treatment is not permanent. In
addition, adsorption alone is not a reliable method of permanently
immobilizing lead which both studies conclude. The authors have also
concluded, and the Agency agrees, that the prohibition should apply to
any lead-containing waste. As stated by Dr. Kendall in his response to
comments, ``Lead-contaminated foundry sand is no different from any
other waste which fails the TCLP test because of excessive amount of
extractable lead. The addition of iron metal (zero valence iron) is not
a permanent treatment because iron oxidizes. Since iron addition is not
a permanent treatment, it should not be allowed for hazardous wastes
which are to be land disposed, regardless of their origin.'' (See
memorandum from Samuel Coleman, USEPA to James R. Berlow, USEPA Re:
``Reply to Comments Concerning Prohibition of Land Disposal of Iron
Treated Lead Contaminated Wastes''. November 17, 1997.)
As indicated above, the addition of iron metal is not a permanent
treatment because the iron inevitably oxidizes and loses its
adsorptivity for soluble lead ions. After oxidation of the iron
surfaces, surface adsorption of lead ions ceases and the lead-bearing
waste returns to its original state; all pretext of treatment is lost.
Since iron addition is not effective, it cannot be allowed for
hazardous lead-containing hazardous wastes that are to be land
disposed, regardless of their origin (i.e., all lead-bearing wastes,
not just foundry sands).
The Agency concludes that addition of iron metal, in the form of
fines, filings, or dust, fails to provide long-term treatment for lead-
containing hazardous wastes. EPA is codifying this determination by
calling the practice impermissible dilution, and so invalidating it as
a means of treating lead in lead-containing hazardous wastes. It can
also be simply viewed as a type of treatment that fails to minimize the
threats to human health and the environment posed by disposal of lead-
containing hazardous wastes, because lead mobility is not substantially
reduced when the waste is disposed.
In response to comments whether use of iron-containing abrasives to
remove lead-based paint, for example from the steel bridge blast
cleaning and painting industry, may be a type of impermissible
dilution, the Agency notes that the dilution prohibition does not apply
to processes which generate a waste, only to processes that treat a
waste which already has been generated. See S. Rep. No. 284, 98th Cong.
2d Sess. 17 (1984). As such, it would not appear that abrasive blasting
is impermissible dilution since it is part of the process generating
the waste, i.e., the removed paint. If generators added iron filings/
dust or discarded, off specification steel shots to lead-based paint
waste (similar to the current foundry practices), it is analogous to
impermissible dilution and this rule bans such practice. However,
addition of iron filing/dust to a hazardous waste (before the hazardous
waste determination) is a lot different from using steel pellets/shots,
silica-containing products, and other abrasive materials for paint
removal.
The Agency has been pursuing several specific efforts to evaluate
the environmental hazards caused by disposal of lead-containing wastes,
including evaluation of damage case information included in the 1996
Hazardous Waste Characteristic Scoping Study, re-examination of the
risk modeling used for the 1995-proposed Hazardous Waste Identification
rule, and evaluation of fate and transport in other environmental media
from industrial nonhazardous solid waste disposal facilities. Upon
completion of these activities, the Agency will be in a better position
to decide whether disposal of lead-containing waste is a health and
environmental concern warranting listing or whether revising the TC
regulatory limit would be more appropriate.
In addition, the Agency notes that a determination that a waste is
not hazardous (here because addition of iron during a generating
process results in a determination that paint waste does not exhibit a
characteristic) may not be a shield against future liability, if the
disposal results in environmental damage. Note that under CERCLA, not
just generators are liable for any environmental damage caused by the
release of hazardous material into the environment. CERCLA liability is
independent of any hazardous waste determination that previously may
have been made. EPA believes that in light of CERCLA liability and the
available environmental contamination data, it would be prudent for
generators to examine their waste generation and management practices
with an eye toward segregation of lead-based paint waste and iron dust/
flakes or steel shots, and potential re-smelting of the lead-bearing
residuals.
As a final matter, it has been argued to the Agency that the
proposed (and now final) action regarding addition of iron filings is
analogous to treatment of fluoride in a process for treating aluminum
spent potliner waste (K088) operated by Reynolds Metals Company. See
generally Docket P33F-S0069 p. 6 (July 7, 1997) and 62 FR 37694, 37697
(July 14, 1997) (responding to comment and establishing October 8, 1997
as the date prohibition of land disposal of K088 wastes takes effect).
The argument goes that in the Reynolds treatment process, reagents are
added to the process that only allow the fluoride to meet the LDR
treatment standard by blinding the analytical method (the TCLP), but do
not result in permanent reduction of fluoride mobility in the treated
wastes. See 62 FR at 37695, noting that levels of fluoride in the
leachate from actual disposal are well in excess of the levels
established in the treatment standard (as measured by the TCLP). Hence,
it is asserted, this process must be an example of impermissible
dilution.
The Agency disagrees. First, EPA calculated that the process did
reduce fluoride mobility on the order of 28%. Docket P33F-S0064. This
estimate may in fact understate the extent of treatment. The maximum
amount of fluoride detected in actual leachate from the disposed
treatment residue is 2228 mg/L. 62 FR 37695. However, untreated
potliners leached fluoride at concentrations ranging from 7730-8860 mg/
L when exposed to the same type of leaching medium (simulated monofill
leaching medium). Docket P33F-S0049 data set J. Thus, EPA finds that
the process is resulting in non-dilutive treatment of fluoride. In
addition, the reagent used for fluoride treatment serves another
legitimate function in the process--as a fluxing agent to prevent
agglomeration of material in the rotary kiln. 62 FR at 37695. Dilution
which is a necessary part of a treatment process is normally
permissible. 51 FR at 40592 (November 7, 1986); 62 FR at 37697.
Consequently, EPA does not regard the treatment of fluoride in the
Reynolds K088 treatment process to be a form of impermissible dilution.
h. Treatment Standards for Wastewater and Nonwastewater Forms of
Mercury Waste. The Agency, in the original Phase IV rule, proposed to
change the treatment standard for one subcategory of TC mercury
wastewaters (D009--All Others) from the characteristic level of 0.20
mg/L (established in the Third Third rule (55 FR 22520. June 1, 1990)
to the previously promulgated UTS for mercury wastewaters (Mercury--All
[[Page 28569]]
Others) of 0.15 mg/L. (60 FR 43654, August 22, 1995.) The Agency
received no comments on this proposed change. As such, the Agency is
promulgating a treatment standard of 0.15 mg/L for wastewater forms of
D009--All Others.
The Agency also proposed to revise the treatment standard for TC
mercury nonwastewaters (D009--All Others) from the characteristic level
of 0.20 mg/L TCLP to 0.025 mg/L TCLP. The nonwastewater UTS for mercury
is based on the mercury standard developed from K071 waste treatment
data. The only comments received on the achievability of this proposed
change were regarding the application of this treatment standard to TC
mercury soil. TC soils are subject to specific treatment standards
being finalized elsewhere in today's rule. More detail can be found on
the mercury soil comments in the Response to Comments Background
Document. Therefore, the Agency is promulgating a treatment standard of
0.025 mg/L TCLP for nonwastewater forms of D009--All Others in today's
rule.
With respect to the broader issue of mercury treatment, the Agency
plans to conduct an intensive review of traditional and innovative
technologies over the next year or so. Outreach to various industry,
academic, and other groups is also being investigated as to its
feasibility. Key information, when available, on this effort can be
obtained from the RCRA Hotline, and notices of significant public
events will be placed in the Federal Register and on EPA's Internet
home page.
i. Final Universal Treatment Standard for Nonwastewater Forms of
Nickel. The Agency proposed in the Phase IV Second Supplemental to
change the UTS for nonwastewaters containing nickel from 5.0 mg/L TCLP
to 13.6 mg/L TCLP. This revision to the UTS was based on new
performance data obtained by the Agency and presented in that notice.
The Agency did not receive any significant comments on this issue.
However, as discussed in an earlier section of today's preamble, the
Agency discovered an error in the calculation of the treatment
standard. In applying the LDR methodology for calculation of a
treatment standard, the Agency failed to conduct a ``Z-score'' outlier
test. With the application of this test, 5 out of the 122 data points
originally used in the calculation of the standard, were determined to
be outliers. This error resulted in a revised treatment standard for
nickel nonwastewaters of 11.0 mg/L TCLP. In light of this amended
standard, the Agency has reviewed all of the comments and data
submittals, and has determined that all the treatment data for nickel
is below 11.0 mg/L TCLP. Accordingly, the Agency is today promulgating
a final UTS for nickel nonwastewaters of 11.0 mg/L TCLP. No change was
proposed for nickel wastewater; therefore, the UTS remains at 3.98 mg/L
for these wastes.
j. Final Treatment Standards for Selenium Wastes. (i) Treatment
standards for TC Selenium Wastes (D010). The majority of commenters
supported the Agency proposal to maintain the 5.7 mg/L TCLP level for
D010 nonwastewaters. They strongly agreed with the Agency's reasoning,
and urged EPA to adopt the proposed treatment standard.
One commenter, however, maintains that the Agency should establish
a ``High Selenium Greater Than 200 ppm'' subcategory for
nonwastewaters, with a corresponding treatment standard of 10 mg/L
TCLP. The commenter has cited technical problems in achieving the
proposed treatment standard level for highly contaminated selenium
wastes. The commenter states that, since 1995, they have consistently
experienced problems treating waste streams from glass manufacturing
companies with wastes that contain high concentrations of selenium. The
commenter provided treatability testing data from a selenium waste
stream, containing 80 mg/L TCLP, which showed that 16 different
treatment recipes were tested prior to finding one that would treat a
selenium waste to below 5.7 mg/L TCLP. The other data, from three
different generators of selenium waste, suggest TCLP values of
untreated waste of between 465-1064 ppm TCLP, with treated wastes
achieving between 2.5 and 45.6 mg/L TCLP.
The Agency has reviewed all the treatment data and, for the most
part, waste streams containing selenium exist either in relatively low
concentrations (0.1-0.13 mg/L TCLP) or in extremely high concentrations
(greater than 450 mg/L TCLP). Because of the highly divergent nature of
these wastes and the difficulty in treating selenium with multiple
metals at almost any concentration, it seems unreasonable to mandate
that one treatment standard could be applicable to both. Calculations
of a revised treatment standard, based only on the newly submitted
treatment data for the high selenium concentration wastes, would yield
a standard of 77.0 mg/L TCLP for selenium nonwastewaters. If a
calculation is done after pooling all selenium data (including low
concentration selenium data), a standard of 261 mg/L TCLP would result.
The Agency is reluctant to establish a treatment standard for selenium
nonwastewaters of either 77.0 mg/L or 261 mg/L TCLP on a national
level. Earlier data suggest and commenters concur that for the majority
of selenium wastes the proposed standard of 5.7 mg/L TCLP for selenium
nonwastewaters is appropriate. Furthermore, only three high selenium
concentration waste streams that could apparently not be treated to
this level. Therefore, there is little reason to pool all treatment
data or to engage in bifurcation of the selenium standard.
Accordingly, the Agency is promulgating a treatment standard of 5.7
mg/L TCLP for nonwastewaters containing selenium. The Agency, however,
is convinced that the high-level selenium waste streams for which data
were submitted to EPA will be unable to be treated to achieve the 5.7
mg/L TCLP standard. Therefore, in a Federal Register notice that will
be published shortly, the Agency will be requesting comment on a
proposal to grant a site-specific treatment variance for Waste
Management, Inc. for the treatment of some D010 wastes containing high
concentrations of selenium.
The Agency also is promulgating as proposed a wastewater treatment
standard of 0.82 mg/L for D010 wastewaters. No comments were received
on this issue.
(ii) Universal Treatment Standard (UTS) for Selenium. As noted
above, in the May 12, l997 reproposal of the Phase IV rule, the Agency
proposed to change the UTS for selenium nonwastewaters from 0.16 mg/L
to 5.7 mg/L TCLP. For the reasons discussed above for D010
nonwastewaters, 5.7 mg/L TCLP is a better reflection of treatability of
difficult-to-treat selenium waste streams than 0.16 mg/L TCLP. This is
the level being promulgated today for the selenium nonwastewater UTS.
(It should be noted that because the UTS is above the TC level for
selenium, selenium is not considered an ``underlying hazardous
constituent'' (UHC) in characteristic waste, according to the
definition at 268.2(i)). The wastewater UTS for selenium remains
unchanged at 0.82 mg/L.
k. Final Treatment Standards for Silver Wastes. (i) Treatment
standards for TC Silver Wastes (D011). In today's final rule, EPA is
promulgating a nonwastewater treatment standard of 0.14 mg/L TCLP for
characteristic silver (D011). For wastewaters, EPA is promulgating a
treatment standard of 0.43 mg/L as proposed in the original Phase IV
proposal on August 22, 1995 (60 FR 43684). EPA is in the process of
determining whether silver should
[[Page 28570]]
remain on the TC list at 40 CFR 261.24(b) Table 1 or whether the
current TC level should be altered. If EPA alters the status of silver
on that TC list, EPA will revisit the treatment standards for silver.
(ii) Proposals, Comments, and Responses. Until today's notice, the
treatment standards for wastewater and nonwastewater forms of D011 have
both been 5.0 mg/L TCLP, which is the TC level. In 1995, EPA proposed a
treatment standard of 0.43 for wastewaters and 0.30 mg/L for
nonwastewater, based on the best treatment data in EPA's possession at
that time (60 FR 43684). EPA received comments urging the Agency to
refrain from setting a treatment standard lower than the TC level and
instead suggesting that EPA remove silver from the TC list altogether
due to new information on the low risk of silver to human health.
In a 1996 Notice of Data Availability (NODA), EPA presented the
option of retaining the 5.0 mg/L treatment standard for D011 wastes (61
FR 21420, May 10, 1996). Comments were divided in two groups: those
which supported the option, and those which stated that EPA had no firm
basis for such a decision, given the potential toxicity of silver to
aquatic life.
Since receipt of the comments on the NODA, EPA acquired more recent
treatment data on TC metals, including silver. Based on these data, EPA
learned that D011 nonwastewaters could be successfully treated to a
level of 0.11 mg/L using HTMR, and EPA proposed revising the UTS for
silver in its Phase IV Second Supplemental proposal. The grab data used
to establish this treatment standard was submitted to the Agency by an
HTMR facility (62 FR 26041) (Background Documents from Second
Supplemental proposal). Commenters on the Second Supplemental
reiterated that silver should not be on the TC list. However, the
commenters continued, if silver remains on the list for now, EPA should
not set a more stringent standard than the current one of 5.0 mg/L, but
rather it should choose a risk-based standard. Commenters explained
further that little D011 is disposed, because silver is generally
recovered from silver wastes.
In response to the reproposal, the Agency received no significant
comment on the technical aspects of achieving the proposed treatment
standard; however the Agency did receive from International Metals
Company (INMETCO) an additional 74 grab data points on the treatment of
silver using HTMR. (See memorandum from Howard Finkel, ICF, Inc., to
Nick Vizzone, USEPA Re: ``Calculation of Universal Treatment Standards
(UTS) for HTMR Residues Using Data Submitted by Horsehead Research
Development Company, Inc. and INMETCO,'' December 17, 1997.) The Agency
used INMETCO data for the calculation of the proposed treatment
standard and determined that this additional data should be included in
the data pool. As previously discussed in Section III.A. of today's
preamble, the Agency discovered an error in the calculation of the
treatment standard. In applying the LDR methodology for calculating a
treatment standard, the Agency failed to conduct a ``Z-score'' outlier
test. With the application of this test and the inclusion of the 74
additional data points, 3 out of the 114 data points, were determined
to be outliers, resulting in a revised treatment standard for silver
nonwastewaters of 0.14 mg/L TCLP. The Agency has reviewed the comments
in light of this amended standard and believes that it can be achieved
by both HTMR and stabilization technologies. Data submitted by
commenters in response to this proposal also support this conclusion.
See supporting information contained in the docket for this rule.
The Agency does not have an adequate basis for taking the actions
recommended by some commenters, i.e. to remove silver from the TC list,
or regulate it at a less stringent level than the proposed technology-
based treatment standard. EPA is in the process of determining whether
silver should remain on the TC list at 40 CFR 261.24(b) Table 1, or
whether the current TC level should be altered. In addition, EPA
continues its work on the Hazardous Waste Identification Rule (HWIR) to
establish risk-based exit levels for hazardous wastes. The Agency is
not yet able to establish a nationally-applicable risk-based level for
silver that fulfills the statutory charge of minimizing threats of
hazardous waste to human health and the environment.
The process of establishing such a level is technically complex;
EPA is currently modeling the ecological and human health effects of
exposure to silver through numerous pathways. Several issues remain
unresolved concerning human health and environmental risk. EPA is
continuing to investigate these issues. The Agency recently acquired
studies indicating that silver may be connected to central nervous
system and other non-cancer effects in humans. The draft Reference Dose
for these effects have not been finalized by the Agency for use in risk
assessments. (A Reference Dose is a benchmark level for chronic
toxicity that is protective of human health.) In addition to potential
adverse human health effects, uncertainties and concerns also remain
for potential adverse environmental effects. Although EPA removed the
Maximum Contaminant Level (MCL) for silver in drinking water, the
Ambient Water Quality Criteria remain in effect due to potential
aquatic toxicity. Further areas of uncertainty are how silver speciates
after release (i.e. which valence state of silver would be present).
The issue could be important since potential toxic effects differ
depending on the species of silver present. In short, EPA's work on
understanding risks from disposal of silver-containing hazardous wastes
is ongoing, and it would be premature to establish a treatment standard
based on risk at this time.
In the absence of such ``minimize threat'' levels for hazardous
constituents, the Agency establishes standards based on Best
Demonstrated Available Technology (BDAT). (See full explanation in the
preamble of the Phase II Final LDR rule at 59 FR 47986, September 19,
1994.) The fact that the UTS for nonwastewater forms of silver is being
lowered (made more stringent) from the existing level of 0.30mg/L to
0.14 mg/L is due to new data on what treatment technology achieves. As
explained in the summary of this preamble section (Section III: Revised
Land Disposal Restrictions for Metal Constituents in All Hazardous
Wastes, Including Toxic Characteristic Metals), technology-based
standards are the best assurance that threat is minimized, given the
uncertainty as to the level at which threats of hazardous waste
disposal are minimized.
EPA expects that the new treatment standard for silver wastes will
have little, if any impact on the regulated community. As stated by
commenters, high-silver wastes are generally recycled due to their
economic value and are covered by the special streamlined standards for
recyclable materials utilized for precious metal recovery at 40 CFR
Part 266.70 Subpart F. Moreover, the Regulatory Impact Analysis for
this rule estimated that the new, more stringent UTS levels for metal
constituents, including silver, will not increase compliance costs.
This is because the current treatment methods already achieve the new
standard of 0.14 mg/L in silver nonwastewaters. (Achievability of the
UTS for TC silver wastewaters is not an issue; EPA received no comments
nor data on its proposal to apply the existing UTS of 0.43 mg/L.)
Thus, the Agency is promulgating the wastewater standard of 0.43
mg/L as proposed and the nonwastewater
[[Page 28571]]
standard of 0.14 mg/L. If EPA changes the status of silver on the TC
list, EPA will revisit the treatment standards for silver wastes.
(iii) Universal Treatment Standard (UTS) for Silver Nonwastewaters.
(Please refer to the discussion above about the development of the
treatment standard for characteristic silver for information on the
development of the UTS levels.) In today's final rule, EPA is
promulgating a nonwastewater UTS of 0.14 mg/L TCLP for silver.
l. Final Universal Treatment Standard for Nonwastewater Forms of
Thallium. The Agency proposed in the Second Supplemental Proposed Rule
to change the UTS for thallium-containing nonwastewaters from 0.078 mg/
L TCLP to 0.20 mg/L. (The original standard was based on composite
sampling from an HTMR facility). This proposal was based on new data
obtained by the Agency and presented in that notice. Several commenters
supported the change. However, two commenters argued that EPA had not
demonstrated that existing commercial technologies were capable of
achieving the proposed standards or that technologies were otherwise
available. The Agency remains unconvinced by the arguments of the
commenters and notes that they supplied no treatment data in support of
their contentions. Accordingly, the Agency is today promulgating as
proposed a revised UTS for nonwastewaters containing thallium of 0.20
mg/L TCLP. No change was proposed for wastewater containing thallium;
therefore the UTS remains 1.4 mg/L.
m. Final Treatment Standard for Nonwastewater Forms of Vanadium in
P119 and P120 Wastes. The Agency proposed in the Second Supplemental
Proposed rule to change the UTS for nonwastewaters containing vanadium
in P119 and P120 wastes from 0.23 mg/L TCLP to 1.6 mg/L TCLP. This
proposal was based on new data obtained by the Agency and presented in
that notice. Commenters were supportive of the change. The treatment
standard of 1.6 mg/L TCLP is being promulgated as proposed. No change
was proposed for wastewater containing vanadium in P119 and P120
wastes, therefore, the UTS remains 4.3 mg/L. The Agency would like to
point out that vanadium is not an ``underlying hazardous constituent''
in characteristic waste, according to the definition at 268.2(i).
n. Final Treatment Standard for Nonwastewater Forms of Zinc in K061
Waste. The Agency proposed in the Second Supplemental Proposed rule to
change the treatment standard for zinc nonwastewaters in K061 waste
from 5.3 mg/L to 4.3 mg/L . This proposal was based on new data
obtained by the Agency and presented in that notice. One commenter was
supportive of the change, while two other commenters were concerned
with zinc being identified as an UHC. Still another commenter, a major
HTMR facility, submitted data (152 data points) showing 100% compliance
with the standard after 6 high statistical outliers were removed.
Indeed, the great majority of these data showed zinc at levels an order
of magnitude below the promulgated standards. EPA believes these data
confirm the achievability of today's standard. Therefore, the Agency is
today promulgating a revised nonwastewater treatment standard of 4.3
mg/L TCLP for K061 waste. No change was proposed for wastewater
containing zinc in K061; therefore the UTS remains 2.61 mg/L. In
response to the comments regarding zinc as an UHC, the Agency would
like to point out that zinc is only regulated in K061 waste; it is not
defined as an ``underlying hazardous constituent'' in characteristic
waste, according to the definition at 268.(i).
Universal Treatment Standards for Twelve Metal Constituents
[Affecting Nonwastewater TC Metal Wastes and Nonwastewater Metal Constituents in All Wastes]
----------------------------------------------------------------------------------------------------------------
2nd
Existing UTS supplemental Final UTS
Waste code Constituent TC level (mg/ level (mg/L proposed UTS level (mg/L
L) TCLP) level (mg/L TCLP)
TCLP)
----------------------------------------------------------------------------------------------------------------
D005............................. Barium............... 100 7.6 21.0 21.0
D006............................. Cadmium.............. 1.0 0.19 0.20 0.11
D007............................. Chromium............. 5.0 0.86 0.85 0.60
D008............................. Lead................. 5.0 0.37 0.75 0.75
D009- all others................. Mercury.............. 0.2 0.025 0.025 0.025
D010............................. Selenium............. 1.0 0.16 5.7 5.7
D011............................. Silver............... 5.0 0.30 0.11 0.14
Antimony............. 2.1 * 0.07 1.15
Beryllium............ 0.014 * 0.02 1.22
Nickel............... 5.0 13.6 11.0
Thallium............. 0.078 0.20 0.20
Vanadium **.......... 0.23 1.6 1.6
Zinc **.............. 5.3 4.3 4.3
----------------------------------------------------------------------------------------------------------------
* The proposed UTS levels for antimony and beryllium were rounded up to the nearest 0.01 mg/L TCLP.
** Vanadium and zinc are not underlying hazardous constituents.
Note: Treatment standards for TC metal wastewaters have also been revised in today's rule, but are not reflected
in this table.
D. Use of TCLP to Evaluate Performance of Treatment Technology for
Treating Hazardous Metal Constituents
Commenters did not question the appropriateness of using the TCLP
as a means of evaluating the performance of the treatment technology
used to treat metal hazardous constituents in hazardous wastes. EPA is
addressing the issue sua sponte to set out why the recent opinion of
the D.C. Circuit in Columbia Falls Aluminum Co. v. EPA (No. 96-1234,
April 3, 1998) does not affect use of the TCLP for this purpose.
Columbia Falls presented an unusual set of facts. EPA had
established treatment standards for spent aluminum liners (waste K088),
which standards used the TCLP to measure performance of the treatment
technology for several hazardous constituents, including arsenic and
fluoride. All of the commercial treatment capacity for this waste was
provided by a single facility, and all of the treatment residue from
this single process was disposed at a single location. Slip op. at p.
6; 62 FR
[[Page 28572]]
at 1993 (Jan. 14, 1997). Notwithstanding that the treatment process was
able to achieve the treatment standards for arsenic and fluoride as
measured by the TCLP (i.e., the treatment residue, when tested with the
TCLP, never exceeded the regulatory levels), actual leachate from the
disposal site contained significantly higher levels of these
constituents. Id. EPA also had not offered any substantive explanation
for continued use of the TCLP to measure performance of the treatment
process for these constituents after the extreme disparities in actual
performance in the field became known. Id. p. 18. Under these
circumstances, the court held that it was arbitrary and capricious to
continue to use the TCLP because it bore no rational relationship to
what was actually occurring. Id. p. 19.
None of these circumstances are present here. The TCLP has not been
shown here to be underpredictive of performance of treatment technology
for key hazardous constituents for any wastes, much less, as in
Columbia Falls, to be drastically underpredictive (for two
constituents) for 100 % of the wastes to which the test applied.
Moreover, the wastes affected by the standard in today's rule will not
uniformly be going to a single disposal environment where actual
leaching of key constituents is shown to be higher than the regulatory
level. Rather, the wastes will be decharacterized and so can be
disposed in any landfill: municipal, subtitle D or subtitle C. Given
the enormous diversity of characteristic wastes and the diversity of
likely disposal environments, the TCLP will not pervasively
underpredict as was the case with spent potliners. Unlike the situation
in Columbia Falls, therefore, there is no argument that application of
the TCLP to measure treatment performance will fail to minimize threats
posed by these wastes' land disposal.1
---------------------------------------------------------------------------
\1\Nor is there a legitimate argument that the TCLP is
impermissibly overpredictive. Indeed, since the TCLP has already
been upheld as a means of identifying many of these metal-containing
wastes as hazardous, Edison Electric Inst. v. EPA, 2 F.3d 438, 444-
45 (D.C. Cir. 1993), and since the `minimize threat' requirement in
section 3004(m) is a more stringent test, HWTC III, 886 F.2d at 363,
a fortiorari it is reasonable to use the TCLP as part of the process
of assuring that threats posed by land disposal of these wastes are
minimized.
---------------------------------------------------------------------------
EPA also emphasizes that the LDR treatment standards are
technology-based, not risk-based. A key role of the TCLP in the
treatment standard is to measure whether the best demonstrated
treatment technology has been properly applied to the waste. Thus,
unlike the situation when the test is used as a means of identifying
whether or not wastes are hazardous, the TCLP is not principally
serving a predictive function when it is used as a component of an LDR
treatment standard. The test is normally a good measure of evaluating
the performance of treatment technology both because it is a widely-
available test for metal mobility, and also because it is typically
somewhat aggressive (Edison Electric, 2 F.3d at 445). Thus, it is a
useful tool for measuring whether metal mobility has been substantially
reduced in order that threats posed by land disposal be minimized (as
required by section 3004 (m)). In the Agency's view, therefore,
questions as to the validity of the TCLP as a component of LDR
treatment standards are raised only under the extreme circumstances
present in Columbia Falls, where, for all wastes and all disposal
scenarios affected by the standard, large disparities between actual
environmental field results and the treatment standard raise
significant questions as to whether treatment is minimizing threats.
These questions are not present for the metal-containing wastes here.
IV. Application of Land Disposal Restrictions to Characteristic
Mineral Processing Wastes
Summary
EPA is today finalizing its proposal to apply the Universal
Treatment Standards (UTS), as revised in part today, to the newly
identified characteristic mineral processing wastes. In earlier rules
and a Report to Congress, EPA has determined which mineral processing
wastes are not excluded in the Bevill Amendment and are thus considered
``newly identified'' wastes subject to RCRA regulations. (See 54 FR
36592, September 1, 1989; 55 FR 2322, January 23, 1990; and Report to
Congress on Special Wastes from Mineral Processing, USEPA, July 31,
1990.) The treatment standards being promulgated today are located in
the table ``Treatment Standards for Hazardous Wastes'' at 268.40 in the
regulatory language for today's rule. The wastes are identified by
characteristic waste code (e.g. D002 corrosive waste, or D008 TC lead
waste); there is no separate section in that table for characteristic
mineral processing wastes.
A. Proposal, Comments, and Responses
In the original Phase IV, EPA proposed to apply the metal UTS, as
measured by the TCLP (60 FR 43582, August 22, 1995) to all TC metal
wastes. On January 25, 1996, EPA further proposed to apply the existing
UTS to the newly identified mineral processing wastes, i.e., mineral
processing wastes that exhibit a characteristic and do not have Bevill
status and are not excluded from being a solid wastes due to recycling.
The Agency stated in this proposal that existing data showed that these
``newly identified'' mineral processing wastes were similar to those
wastes for which the UTS was achievable, and consequently the UTS
fairly reflected the performance of Best Demonstrated Available
Technology (BDAT) for these wastes. (See 61 FR 2338 for a complete
discussion of the Agency's rationale for extending the UTS to both
wastewater and nonwastewater forms of ``newly identified'' mineral
processing wastes.)
Many commenters in response to this proposal took issue with the
Agency's conclusions that the existing data demonstrated that the UTS
was achievable for the newly identified mineral processing wastes and
stated that the record for the rulemaking reflected no such showing.
The commenters further argued that to develop representative treatment
standards for mineral processing wastes, the Agency must: (1) Collect
and analyze a representative mineral processing waste characterization
and treatability data set; (2) analyze that data using well-reasoned
and documented methods for determining the treatability of the subject
wastes; (3) make a determination as to whether the UTS or some other
LDR treatment standards are appropriately applied to mineral processing
wastes; and (4) provide notice and an opportunity to comment on that
determination prior to imposing any LDR treatment standards on such
wastes. Several other commenters took issue with the Agency's use of
only HTMR data to develop the treatment standards.
As a result of these comments and others received in response to
the original Phase IV rule, the Agency decided to further assess the
treatment of TC metal wastes and mineral processing wastes. As
previously discussed in today's preamble, the Agency collected actual
stabilization performance data during three site visits conducted in
September 1997. In particular, treatment data were collected for the
following primary mineral processing wastes: cadmium sponge residue,
cupel and crucibles from fire assay laboratories, slag from fire assay
laboratory, soil and debris contaminated with sulfuric acid, blast
furnace slag, baghouse dust, lead/bromide residue, and gold ore leach
tailings. In addition, treatment data from the following secondary
mineral processing wastes
[[Page 28573]]
were also collected: lead slag waste, lead-bearing assay laboratory
wastes, lead contaminated wastes, cupels, and debris; blast furnace
slag, lead recycling by-products, lead contaminated soils, and lead
battery recycling slag waste. Many of these wastes were particularly
difficult to treat due to high total and leachable levels of metals,
extreme Ph, and presence of multiple hazardous metal constituents.
As previously discussed in an earlier section of today's preamble,
the Agency assessed two data sets representing performance of
stabilization and HTMR for the treatment of metal-containing waste
streams. This assessment began with the calculation of treatment
standards for each of the two data sets. Next, the Agency compared the
treatment levels for stabilization versus HTMR. Based on this
comparison, the Agency selected the highest level for each metal as the
proposed UTS to allow for process variability and detection limit
difficulties. As noted earlier, this approach is consistent with the
legislative goal of providing substantial treatment through standards
that are achievable by an array of well-performing available treatment
technologies.
On May 12, 1997, the Agency issued a Second Supplemental Proposal
(62 FR 26041). In it, EPA proposed to change the numerical limits for
all nonwastewater wastes containing the following metal constituents:
antimony, arsenic, barium, beryllium, cadmium, chromium, lead, mercury,
nickel, selenium, silver, thallium, vanadium, and zinc. EPA also
proposed these same UTS treatment standards for TC metal wastes
identified as hazardous due to the concentration of barium, cadmium,
chromium, lead, selenium, or silver. Based on the data collection
efforts, the methodology used to develop these revised standards, and
the preponderance of mineral processing treatment data used to
calculate the standards, the Agency was convinced that the
transferability of the universal treatment standards to mineral
processing wastes was well supported.
In response to these revised treatment standards and their
application to mineral processing wastes, the Agency received few
comments. Several commenters supported the Agency's decision to apply
the LDR treatment standards to mineral processing wastes. A limited
few, however, continued to argue that EPA's application of the LDR
program to mineral processing wastes was not supported by the record.
The commenters' position is unsubstantiated, relying entirely upon
assertions that the standards are not achievable. No data was submitted
to support the commenters' position. Conversely, the data in hand (some
of which reflect successful treatment of hard-to-treat mineral
processing wastes) show that the treatment standards are achievable
using either stabilization or HTMR for mineral processing wastes. As a
result, the Agency is today finalizing the applicability of the
existing UTS to the newly identified mineral processing wastes.
The reader is referred to an earlier section of today's preamble
for a complete discussion of treatment standards for metal wastes being
promulgated today.
B. Clarification That Universal Treatment Standards Apply to Ignitable,
Corrosive, and Reactive Characteristic Mineral Processing Wastes
As discussed above, the treatment standards promulgated in this
rule will apply to all the newly identified characteristic wastes from
mineral processing operations. This includes not only the mineral
processing wastes exhibiting the toxicity characteristic (TC), but also
wastes that exhibit the characteristic of ignitability (D001);
corrosivity (D002); or reactivity (D003). (See definitions of these
characteristics at 40 CFR 261.20 through 261.23.) The treatment
standards found in 40 CFR 268.40 require removal of the characteristic
as well as meeting the treatment standards for all underlying hazardous
constituents (UHCs) reasonably expected to be present at levels above
the UTS. The Agency received no comment on this issue at proposal (see
61 FR 2338, January 25, 1996). Therefore, the Agency has no reason to
believe that the UTS are not achievable for mineral processing wastes
also exhibiting the characteristic of ignitability, corrosivity and/or
reactivity. As such, the Agency is today promulgating the application
of UTS to D001, D002, and D003 mineral processing wastes.
C. Use of TCLP to Evaluate Performance of Treatment Technology for
Treating Hazardous Metal Constituents in Mineral Processing Wastes
Part of this rulemaking involves consideration of what the
appropriate regulatory test is to determine if mineral processing
wastes exhibit the toxicity characteristic. The Agency addresses this
issue in detail later in this preamble when discussing retention of the
TCLP for this purpose. Here, we confirm that the Agency will also
continue to use the TCLP as part of the LDR treatment standard for
these wastes. Although commenters did not raise this issue, the Agency
feels that addressing it is appropriate in light of the D.C. Circuit's
recent decision in Columbia Falls Aluminum Co. v. EPA (No. 96-1234,
April 3, 1998).
The critical component in making waste identification
determinations (i.e., to determine whether a waste should be regulated)
is ascertaining a plausible mismanagement scenario for the waste if
unregulated, and finding a predictive model that can reasonably
evaluate whether the waste is capable of posing substantial present or
potential harm to human health and the environment under those
conditions. Edison Electric Inst., 2 F. 3d at 444. This issue simply
does not arise in the LDR context since the wastes subject to LDR are
regulated hazardous wastes, and the issue of where and how they would
have been managed absent Subtitle C regulation is irrelevant.
In the LDR context, all land disposal (except that occurring in no-
migration units) is defined as being unprotective (see, e.g. RCRA
section 3004(d)(1)), largely due to the ``long-term uncertainties
associated with land disposal'' (id.). For this reason, treatment
standards reflecting performance of Best Demonstrated Available
Technology provide an objective means of removing as much of this
inherent ``long-term uncertainty'' as possible, and so permissibly
achieve the ultimate requirement of minimizing threats posed by land
disposal of hazardous wastes. HWTC III, 886 F. 2d at 362-65; 55 FR at
6642 (Feb. 26, 1990). The principal role of the TCLP in these treatment
standards is assuring the performance levels achievable from use of
these best treatment technologies, not predicting environmental fate in
the disposal environment.
As discussed earlier, the TCLP is historically accepted as being
well-suited for evaluating performance of treatment technology for
metals given its availability and general aggressiveness for mobilizing
metals. Also, we note that since the TCLP serves a different purpose in
the LDR treatment standards than it serves for identifying wastes as
hazardous, and since it is well-suited for that purpose, there would be
no contradiction in using it as part of the LDR standard even if a
different test were to be used (presumably in the future) for waste
identification.
Nor does the Columbia Falls opinion undercut use of the TCLP as a
component of treatment standards for mineral processing wastes. As
noted earlier with respect to other toxic metal-containing wastes, EPA
does not view Columbia Falls as requiring a change in
[[Page 28574]]
use of the TCLP as part of the LDR treatment standards. The TCLP has
not been shown generally to be underpredictive of performance of
treatment technology for key hazardous constituents for any wastes,
much less, as in Columbia Falls, to be drastically underpredictive (for
two constituents) for 100% of the wastes to which the test applied. For
all mineral processing wastes to which it was applied, the TCLP test
has not been shown to be underpredictive either, and so would be part
of the mechanism for assuring that treatment minimizes threats posed by
land disposal of these wastes. Moreover, it should be noted that
mineral processing wastes can be and are treated commercially, and the
treatment residues are then disposed along with other wastes in
different types of disposal units. See, e.g. the document entitled,
``Background Documents Supporting the Phase IV Final Rule: Metal
Treatment Standards'' in the RCRA Docket (commercial treatment company
treating mineral processing wastes along with other metal-containing
wastes and disposing of commingled treatment residues). These units
certainly can generate mildly acidic leachate. 51 FR at 40594 (Nov. 7,
1986). Given these circumstances, the TCLP is an appropriate part of a
standard which minimizes threats posed by land disposal of these
wastes.
V. Other LDR Issues That May Affect Both Toxic Characteristic Metal
Wastes and Characteristic Mineral Processing Wastes
A. Treatment Standards for Soil Contaminated With TC Metal Wastes or
Characteristic Mineral Processing Wastes
1. Summary
EPA has decided that the LDR treatment standards (i.e., UTS) for
toxicity characteristic metals (D004-D011) and newly identified mineral
processing wastes being promulgated in today's rulemaking will not
apply to soils contaminated with these hazardous wastes. Instead, these
contaminated soils will be subject to the treatment standards for soil
originally proposed in a separate rulemaking entitled the Hazardous
Waste Identification Rule for Contaminated Media (``HWIR-Media'') (61
FR 11804, April 29, 1996). These treatment standards are being
finalized in a separate section of today's rule. However, because of
their impacts on TC metal and mineral processing wastes, a brief
introductory discussion is warranted at this point.
2. Discussion of Today's Approach
In the Phase IV proposed rule (60 FR 43682, August 22, 1995), the
Agency did not specifically exempt soil contaminated with TC metal
wastes from the newly proposed LDR standards; thus, the UTS standards
for metals would have applied to TC metal soils. In the Phase IV First
Supplemental Proposal (61 FR 2338, January 25, 1996), the Agency
proposed applying existing universal treatment standards to newly
identified mineral processing wastes, i.e., to mineral processing
wastes that exhibit a characteristic, do not have Bevill status, and
are not excluded from being solid wastes due to recycling. As a
consequence, soils contaminated with these newly identified mineral
processing wastes would also have been subject to UTS.
In today's rule, the Agency is finalizing alternative treatment
standards for contaminated soil reproposed in the HWIR-Media
rulemaking. (See the section of this preamble on treatment standards
for contaminated soil.) These treatment standards for hazardous
contaminated soils are being finalized for all hazardous wastes,
including TC metal and newly identified mineral processing wastes.
B. LDR Treatment Standards for Manufactured Gas Plant Waste (MGP)
1. Summary
Today, the Agency is promulgating treatment standards for hazardous
MGP wastes and soils, i.e., wastes and contaminated soils that resulted
from processing coal to produce gas and that exhibit a characteristic
of hazardous waste. Typically these operations were conducted at
manufactured gas plants until the 1950s, and wastes remain at those
closed MGP sites. MGP wastes are among the mineral processing wastes
which the Agency determined in 1989 and 1990 to be subject to RCRA
jurisdiction because they are not excluded from RCRA by the Bevill
Amendment. See 54 FR 36592 (September 1, 1989). Hence, they are a
subset of the newly identified mineral processing wastes covered by the
prohibitions and treatment standards promulgated in this rule.
On January 25, 1996, EPA proposed to apply LDR treatment standards
to MGP wastes (61 FR 2360). MGP wastes are no longer being produced,
since manufactured gas plants are no longer in operation. The Agency
notes that the LDRs only apply at closed MGP sites that are excavated
and managed in a way that constitutes placement in a land disposal unit
(See 61 FR 18805, April 29, 1996.) The LDRs would require that actively
managed MGP wastes be treated to eliminate any characteristics and to
achieve the UTS for any underlying hazardous constituents prior to land
disposal. Today's rule finalizes the UTS for MGP wastes that exhibit
the toxicity characteristic. However, for soils contaminated with MGP
wastes, EPA is today promulgating treatment standards specifically for
hazardous soil. These soil standards, generally, require treatment to
achieve 90 percent reduction of hazardous constituent levels, or 10
times the UTS levels. See Section VII of this preamble.
Today's rule does not alter the Agency's 1993 memorandum that
interpreted existing rules to say that the ash that results from
burning MGP remediation wastes along with coal in utility boilers
remains covered by the Bevill amendment and hence is not regulated
under Subtitle C rules. (See memorandum, dated April 26, 1993, entitled
``Remediation of Historic Manufactured Gas Plant Sites'', from Sylvia
K. Lowrance, Director of the Office of Solid Waste, to EPA Regional
Waste Management Division Directors. The memorandum is located in the
RCRA docket for the Phase IV Supplemental Proposal dated January 25,
1996; 61 FR 2338.) Such residuals are considered to be covered by the
Bevill amendment because they result primarily from the combustion of
coal (assuming, if the MGP remediation wastes that are co-burned are
hazardous, the residues are not significantly affected by burning the
MGP wastes, within the meaning of 40 CFR section 266.112).
2. Background
Manufactured gas plants were designed to generate gas from coal.
The coal tar residuals generated from the process remain at these
historic MGP sites. Many of these sites have soils contaminated with
these coal tar residuals. The majority of these contaminated soils will
come from the cleanup of historic MGP sites. A significant portion of
the soil is nonhazardous, but approximately 15 percent of the soils
fail the toxicity characteristic leaching procedure test for benzene.
These toxicity characteristic (TC) soils also typically contain PAHs,
heavy metals, inorganics, volatile aromatics, and phenolics. At certain
closed MGP sites, there can be non-soil hazardous wastes, e.g., coal
tars in tar holders, which may need to be treated to UTS levels if they
are actively managed and land disposed.
[[Page 28575]]
3. Public Comments and EPA Responses
Commenters expressed several major concerns about the Phase IV
proposal to apply UTS to MGP wastes. First, they urged the Agency to
delay implementing the soil standards until the final HWIR-media rule
becomes effective. In addition, commenters requested that EPA re-affirm
the Agency's 1993 co-burning memorandum for MGP wastes. Finally,
commenters urged the Agency to establish specified treatment methods
for those MGP wastes that will not be managed according to the Agency's
1993 co-burning memorandum, rather than making the wastes subject to
the UTS concentration levels as proposed. One commenter identified
several methods of management that could be specified: ``recycling
technologies including the use of coal tar residuals to manufacture
asphalt, bricks, and cement; and combustion technologies that include
utility boiler co-burning, incineration and thermal desorption.'' The
commenter stated that specified methods would preserve flexibility for
managing MGP site remediations and remove regulatory barriers to
expeditious site cleanups.
Regarding the commenter's concern about the coordination of Phase
IV standards and the HWIR-media rule, the Agency is finalizing
treatment standards for hazardous contaminated soils in a separate
section of today's rule. Also, although the Agency did not reopen the
issue, the Agency confirms that the 1993 co-burning interpretation
remains in effect.
The Agency has studied carefully the comment urging the Agency to
specify incorporation of MGP waste into asphalt, bricks, or concrete as
a designated method of treatment, which would have the effect of making
wastes so treated not subject to meeting numerical treatment standards
for hazardous constituents. The recycling of hazardous waste-
contaminated soil in asphalt, brick, or cement manufacturing produces
products that potentially could be applied or placed on the land. These
recycling practices incorporate the contaminated soils into the
products, and, thus, are considered to be a ``use constituting
disposal'' (see section 261.2 (c) (1)). The use constituting disposal
practice (assuming legitimate recycling is occurring) is regulated per
the provisions of 40 CFR sections 266.20 through 266.23. This issue is
discussed in more detail in section VII of the preamble.
At this time, the Agency does not have adequate information on
asphalt, brick, or cement produced from MGP hazardous waste to
determine whether these waste-derived products minimize threats posed
by land disposal of MGP wastes. (See also response to USWAG comment
#00035 in ``Phase IV Response to Comments'' in the docket to this
rule.) Until the Agency can further study the issue, it is not
designating production of these materials from MGP soils as a specified
method of treatment. Existing 266.23 (a) continues to apply. And, as
noted earlier, for MGP sites in particular, the Bevill exclusion still
applies for MGP wastes co-burned in coal-fired utility boilers.
EPA is aware that the regulated community has requested various
types of flexibility from LDR treatment standards in managing their
site-specific cleanup, remediation, and/or removal activities of these
wastes and contaminated soils. With the possible exception of use
consituting disposal scenarios, the Agency continues to believe that
more complete relief for remediation wastes is needed, particularly
with respect to the land disposal restrictions and is best provided by
targeted statutory change. Thus, the Agency will continue to
participate in discussion of potential legislative solutions on this
important issue.
Please refer to the Phase IV response to comments document that is
available at the RCRA docket for responses to other issues raised by
commenters.
C. Treatment Standards for Debris Contaminated With Phase IV wastes
The Agency is clarifying that debris contaminated with TC metal or
characteristic mineral processing wastes can be disposed if it meets
the treatment standards established in this rule, but also can be
disposed if it meets the standards for debris set out at 40 CFR 268.45.
D. Treatment Standards for Radioactive Mixed Waste
1. Background
Radioactive mixed wastes are wastes which satisfy the definition of
radioactive waste subject to the Atomic Energy Act (AEA) 10 CFR Part 61
and also contain waste that is either listed as a hazardous waste in
Subpart D of 40 CFR Part 261, or that exhibits any of the hazardous
characteristics identified in Subpart C of 40 CFR Part 261. Since the
hazardous portions of the mixed waste are subject to RCRA, the land
disposal restrictions apply to the mixed waste. Today's rule
promulgates revised treatment standards for radioactive wastes that are
mixed with metal characteristic wastes and do not currently have a
method of treatment (i.e. HLVIT) specified as BDAT.
Treatment standards for radioactive waste mixed with metal-bearing
waste were first promulgated in the Third Third rule at 55 FR 22626
(June 1, 1990). That rule established a subcategory of mixed wastes for
a specific high level wastestream at the Savannah River site, for which
a specified method of treatment is currently required. This method is
HLVIT (vitrification of high-level radioactive waste) for radioactive
high-level wastes generated during the reprocessing of fuel rods mixed
with characteristic metal wastes. This was done because of the human
health hazards associated with sampling that would be required if
numerical standards were applied. The Third Third rule stated that all
the promulgated treatment standards in that rule for RCRA listed and
characteristic wastes apply to the RCRA hazardous portion of mixed
radioactive (high-level, TRU, and low-level) wastes, unless EPA has
specifically established a separate treatability group for a specific
category of mixed waste. Thus, that rule required that radioactive
waste mixed with metal characteristic waste would have to comply with
the LDR treatment standard for the metal characteristic waste, as well
as any requirements set forth by the NRC for the radioactive component
of the mixed waste.
Because today's rule revises the treatment standards for metal
characteristic wastes (i.e., revising certain metal numeric treatment
standards, and applying UTS levels to underlying hazardous constituents
in the characteristic waste), the treatment standards for radioactive
waste mixed with metal characteristic waste that were not specifically
subcategorized in the Third Third rule are also affected. Today's rule
also revises treatment standards for twelve metal constituents in all
wastes, including radioactive mixed wastes. In conclusion, unless
specifically noted in Section 268, the treatment standards promulgated
today apply to all mixed wastes.
2. Proposal and Issues Discussed by Comments
In addition to revising metal characteristic treatment standards
that apply to mixed waste, the Phase IV proposal also discussed mixed
radioactive and characteristic metal wastes which have been previously
stabilized to meet the LDR requirements, and are now being stored until
disposal capacity becomes available. The rule proposed to allow this
particular category of stabilized
[[Page 28576]]
characteristic metal mixed wastes to comply with the LDR metal
standards that were in effect at the time the waste was stabilized.
More simply, they would require no further treatment to comply with the
newly promulgated TC metal standards. The proposal stated that mixed
radioactive/characteristic metal wastes that are stabilized after the
effective date of Phase IV would be subject to the metal treatment
standards promulgated in the Phase IV rulemaking.
The majority of commenters agreed with this approach. The Agency
believes that requiring facilities to re-treat the wastes could pose
significant threats to human health and the environment (worker
exposure, environmental releases). Essentially, requiring these wastes
to meet the newly promulgated treatment standards could necessitate
treaters opening sealed drums of stabilized mixed waste, grinding the
stabilized material, and re-treating to comply with the treatment
standards for the few constituents for which EPA is lowering the
standards. One commenter wanted the exemption to be broadened to
include wastes that were treated by methods other than stabilization.
Because the exposure concerns of re-treating the previously stabilized
waste primarily center around the idea of first grinding up the
stabilized material to retreat it and the potential added radiological
exposures attendant thereto, the broadening of this exemption without
more specific information is not warranted at this point. Of course, if
any wastes already meet the applicable treatment standards, for example
macroencapsulation, then there is no need to initiate further
treatment. It is important to emphasize that the Agency does not want
any more handling of this material than is necessary, and we will
entertain site-specific treatment variances to ensure that the
appropriate balance is struck to ensure minimization of threats.
As noted, the majority of commenters agreed that hazards from added
worker radiation exposure associated with re-treatment (i.e., opening
drums, grinding already treated masses of mixed waste) would probably
offset any gain in protection of human health and the environment
resulting from compliance with the new metal treatment standards
proposed in Phase IV. It was pointed out by one commenter that this is
consistent with the Storage Prohibition (40 CFR 268.50(e) ), where
wastes that have met the applicable treatment standards are excluded
from the storage prohibition. In addition, one commenter stated that
these wastes have been treated to meet the LDR standards in place at
the time of treatment, and the only reason they have not already been
land disposed is that capacity has not been available. The one
commenter who disagreed with the proposal stated that neither
retreatment nor an exemption from the new standards are reasonable
options, but prefers retreatment. The commenter did not provide
support, and the Agency is not persuaded that retreatment is
environmentally preferable. Thus, the Agency is promulgating the
exemption as proposed. In response to comments, EPA is also indicating
that the same principle applies with regard to listed wastes stabilized
to meet a previous treatment standard, which standard is affected by
this rule because the metal UTS have changed. Again, retreating these
wastes would likely create new threats, not minimize them.
One DOE facility requested that the Agency clarify whether a waste
required to be treated by a specific technology (i.e., HLVIT) would be
required to be further treated for any UHCs present in the waste above
UTS levels. The Agency is not imposing additional treatment
requirements on those wastes for which a method of treatment (HLVIT) is
specified.
Four facilities are concerned that uranium mills tailings will not
remain exempt under RCRA. These wastes are by-product materials from
uranium mining (i.e., waste acids from solvent extractions, barren
lixiviants, slimes from solvent extraction and waste solvents generated
in the beneficiation process during the extraction of uranium ore) and,
therefore, are excluded from the treatment standards being promulgated
today for TC metal wastes. With respect to the radioactive mineral
processing wastes, RCRA Section 1004 (27) as codified in 40 CFR
261.4(a)(4) states that ``...source, special nuclear or by-product
material as defined by the Atomic Energy Act of 1954 as amended, 42
U.S.C. 2100 et seq...'' are not solid wastes. Therefore, such excluded
materials are not subject to this rule. However, all other wastes not
excluded under 40 CFR 261.4 are subject to today's rulemaking (assuming
the waste is otherwise subject to today's rule).
Therefore, the Agency is today finalizing as proposed numerical
treatment standards for radioactive waste mixed with metal-bearing
characteristic waste for which no method of treatment has been
established as the treatment standard.
E. Underlying Hazardous Constituents in TC Metal Wastes and
Characteristic Mineral Processing Wastes
Summary: As with other characteristic wastes, TC metal wastes
(D004--D011) and newly identified mineral processing wastes cannot be
land disposed until the characteristic is removed and any underlying
hazardous constituents (UHCs) are below universal treatment standards.
1. Background
In 1993, EPA began requiring that, in addition to removing the
characteristic in the characteristic wastes, treatment must ensure that
UHCs are below their UTS levels. (58 FR 29860; see also 59 FR 47982.
See also Chemical Waste Management v. EPA, 976 F. 2d at 13-14, 16-18
(treatment standards may be lower than the level at which waste is
identified as hazardous, and underlying hazardous constituents must be
treated to minimize threats posed by land disposal)). UHCs are any
constituents in 40 CFR 268.48 that are reasonably expected to be
present at levels above the UTS at the point of generation of the
characteristic waste. See 40 CFR 268.2(i). EPA's review of the
treatment data on TC metal and mineral processing wastes shows that
these wastes often contain underlying hazardous constituents, and that
UTS are achievable for the UHCs.
2. Discussion of Today's Approach
In the August 22, 1995 Phase IV proposed rule, EPA proposed to
apply treatment standards to all TC metal wastes, and on January 25,
1996, EPA further proposed the same for characteristic mineral
processing wastes. See 60 FR 43654 and 61 FR 2338. Furthermore, EPA
proposed that when the new treatment standards were promulgated, all of
those newly identified wastes would have to be treated not only to meet
the proposed treatment standards, but also to meet treatment standards
for any UHCs reasonably expected to be present (at levels above UTS) in
those wastes at the wastes' point of generation. See 60 FR 43654.
One commenter disagreed with the Agency's proposal, stating that
the TC metal wastes that also contain organic UHCs would have to be
treated by combustion technologies to achieve the organic UTS levels.
The Agency disagrees. The organic UTS levels were based on the
performance of combustion as well as other removal and destruction
technologies. These other removal and destruction technologies can be
used to treat organic UHCs to UTS levels in TC
[[Page 28577]]
metal wastes. Thus, pretreatment of the waste can be used to achieve
the organic UTS levels. In addition, the commenter believed there would
be difficulties in stabilizing incinerator ash to meet the finalized
UTS levels for the metals. The Agency does not agree. In determining
the UTS numbers for each metal, the wastes with the most difficult to
treat metal constituents were treated by HTMR and stabilization
technologies. The higher value between the two technologies was
selected as the treatment standard. Thus, treatment using either HTMR
or stabilization is expected to achieve the final metal UTS levels. It
should be noted that selenium is not being regarded as a UHC since its
treatment standard is above its characteristic level. Thus, a selenium
characteristic waste will always be hazardous unless the selenium
concentration is below the characteristic level of 1 mg/L TCLP.
Fluoride, vanadium, and zinc are other metals not considered UHCs in
characteristic wastes because these three metals are not on the
Hazardous Constituents Table, 40 CFR 261 Appendix VIII (i.e., they are
not ``hazardous constituents''). (See Background Document for Phase IV
Second Supplemental Proposed Rule.)
VI. Issues Relating to Newly-Identified Mineral Processing Wastes
As explained above, EPA considers mineral processing hazardous
wastes to be newly identified or listed for purposes of determining
when LDR prohibitions apply, since their status as hazardous wastes was
not established until after 1984. Today's rule establishes prohibitions
and treatment standards for these wastes, pursuant to RCRA section
3004(g)(4).
However, there are a series of important threshold issues in
determining what these prohibitions and treatment standards apply to,
generally involving the issues of whether primary mineral processing
secondary materials are solid and hazardous wastes. There are three
main issues. A fundamental first issue is whether, if a mineral
processing secondary material (which would otherwise be a hazardous
waste) is recycled within the mineral processing industry sector, it is
a solid waste. Of particular importance in assessing applicability of
the LDR program, is a second issue: whether there is land placement of
the mineral processing secondary material before recycling, or during
the recycling process. If the material is a waste, a third issue is
relevant: is the waste a beneficiation/extraction waste or one of 20
mineral processing wastes that are excluded from subtitle C regulation
under the Bevill exclusion (see RCRA 3001 (b)(3)(A)(ii)).
In this rulemaking, EPA also is addressing certain sub-issues that
are related to determining whether a particular mining waste is subject
to the Bevill exclusion, including whether a waste is ``uniquely
associated'' with mining, how the introduction of non-exempt, mineral
processing feedstocks into a Bevill process may affect the Bevill
status of the waste generated from the process, and how the mixture of
Bevill wastes with other hazardous wastes affects the Bevill status of
the resulting wastes when disposed.
As stated in the January 1996 proposal, EPA is not reopening in any
respect the Bevill determinations previously made by the Agency,
including the Agency's articulation in 1989 of the functional
distinctions between beneficiation and mineral processing. See 61 Fed.
Reg. 2354. Some commenters misinterpreted EPA's statements in the
proposal generally describing the beneficiation/processing distinction
as somehow reinterpreting the scope of the Bevill amendment. That
discussion was intended, however, merely to restate principles
articulated by EPA in 1989 (see 54 Fed. Reg. 36619), not to reopen in
any way the distinctions as articulated previously by the Agency.
Whether a particular waste is from beneficiation or mineral processing
will continue to be determined based on 40 CFR 261.4(b)(7) and criteria
articulated by EPA in the 1989 preamble.
The following sections of the preamble discuss these threshold
issues.
A. Introduction
In July of 1988, the U.S. Court of Appeals, for the D.C. Circuit in
Environmental Defense Fund v. EPA (EDF II), 852 F.2d 1316 (D.C. Cir.
1988), cert. denied, 489 U.S. 1011(1989), ordered EPA to restrict the
scope of the Bevill mining waste exclusion, as it applied to mineral
processing wastes, to include only ``large volume, low hazard'' wastes.
In response, the Agency promulgated several rules that delineated the
scope of the Bevill exemption for extraction/beneficiation and mineral
processing wastes. In these rulemakings, the Agency applied high-
volume/low toxicity criteria for determining whether a particular waste
was subject to the Bevill exemption. The Agency also described the
general characteristics that would distinguish extraction/beneficiation
wastes from mineral processing wastes. The rules also evaluated which
specific mineral processing wastes were in conformance with these high
volume/low toxicity criteria and thus were eligible for the exclusion
provided by RCRA 3001(b)(3)(A)(ii) (the ``Bevill exclusion'').
These rules were promulgated on September 1, 1989 (54 FR 36592) and
on January 23, 1990 (55 FR 2322). EPA was required to prepare a Report
to Congress which further studied mineral processing wastes identified
in the 1990 rule to determine their regulatory status under the Bevill
exclusion. This report was issued on July 31, 1990 (Report to Congress
on Wastes from Mineral Processing). EPA fully considered information
from, and comments on, the Report to Congress in a regulatory
determination published on June 13, 1991(56 FR 27300). The list of
Bevill exempt activities and wastes is set out at 40 CFR 261.4(b)(7).
Many mineral processing wastes that EPA determined did not fall
within the Bevill exclusion as a result of the 1991 rule appear to
exhibit the toxicity characteristic due to metal content (D004-D011),
and also exhibit corrosivity (D002), and/or reactivity (D003). For
purposes of LDR applicability, these wastes are ``newly identified''
because they were brought into the RCRA Subtitle C system after the
date of enactment of the Hazardous and Solid Waste Act Amendments on
November 8, 1984. (See 55 FR at 22667 (June 1, 1990). Hence, their land
disposal has not been prohibited until today's rule.
The Agency is currently required by a court approved consent decree
(EDF v. Browner, No. 89-0598 (D.D.C.)) to promulgate LDR restrictions
for characteristic and listed mineral processing wastes, and metal
wastes hazardous under the revised toxicity characteristic, by April
15, 1998. On April 14, 1998, EPA filed an unopposed motion requesting
the Court to extend the deadline to April 30, 1998 to establish Land
Disposal Restrictions for newly identified mineral processing wastes by
April, 1998. The legal obligation to establish prohibitions on land
disposal and treatment standards for newly identified mineral
processing wastes is established by statute. RCRA section 3004(g)(4).
B. Overview of Today's Rule
1. Issues Related to Which Mineral Processing Secondary Materials are
Subject to LDRs
As noted above, a threshold question when considering whether
wastes are prohibited from land disposal is whether the mineral
processing secondary materials are ``solid wastes''
[[Page 28578]]
under RCRA. The issue is of importance with respect to land disposal
prohibitions for the mineral processing industry because this industry
recycles mineral processing secondary materials that exhibit hazardous
waste characteristics, and sometimes uses land-based units--piles and
impoundments--to store these materials before recycling. Thus, there is
an issue as to whether such materials are solid wastes subject to the
land disposal prohibition (as well as to the rest of Subtitle C). The
Agency issued two proposals (61 FR 2338, January 25, 1996, and 62 FR
26041, May 12, 1997) which discussed potential RCRA jurisdiction over
secondary materials from mineral processing that are reclaimed within
the industry sector and sought comment on a proposed conditional
exclusion from the definition of solid waste.
We now further summarize how today's rule deals with issues raised
by whether and when mineral processing secondary materials, when placed
in land-based storage units, are subject to the LDR standards and other
Subtitle C controls. The rationale for the Agency's decisions are
described below.
To be a hazardous waste, a material must first be a solid waste.
RCRA section 1004 (5). To be a ``solid waste'' a material must in some
sense be ``discarded.'' RCRA section 1004 (27). A material is not
``discarded'' if it is ``destined for immediate reuse in another phase
of the industry's ongoing production process and [has] not yet become
part of the waste disposal problem.'' American Mining Congress v. EPA,
907 F. 2d 1179, 1186 (D.C. Cir. 1990).
This rule amends the current RCRA rules (existing 40 CFR
261.2(c)(3)) defining which ``secondary materials''--sludges, by-
products and spent materials--being generated by and reclaimed by
mineral processing or beneficiation facilities are solid wastes. The
rule does so by creating a conditional exclusion to the regulatory
definition of solid waste, so that:
(a) Mineral processing secondary materials may not be stored on the
land before they are reclaimed. The rule provides a partial exception
to this principle: if the pile is placed on a pad which has been
approved as protective by an EPA Region or a State with an authorized
program, the pile would not be considered to be storing solid or
hazardous waste, and so would be outside RCRA jurisdiction. Thus, if
storage is used prior to reentry into a mineral processing reclamation
process, to be excluded, all mineral processing secondary materials
must be placed in tanks, containers, buildings, or approved piles
resting on pads;
(b) Mineral processing secondary materials must be legitimately
recycled to recover metal, acid, cyanide, water, or other values:
(c) Mineral processing secondary materials cannot be accumulated
speculatively; and
(d) Facilities utilizing this conditional exclusion must submit a
one-time notification of their recycling activities to EPA or the
authorized State describing: the materials being recycled and the
processes into which they are recycled; where storage units are located
and their design. Facilities must update the notification if their
recycling activities change.
EPA is thus essentially disclaiming authority over mineral
processing secondary materials that are reclaimed within the mineral
processing or mining/beneficiation industry sector, so long as there is
no land-based storage preceding reclamation. Further, potential
jurisdiction affects only storage. EPA is not asserting authority over
any mineral processing production unit, even if the unit is land-based.
2. Issues Related to Whether Materials are Within the Scope of the
Bevill Exclusion
a. Use of Non-Bevill Materials as Feedstocks to Operations Whose
Waste is Bevill Exempt. Today's rule also allows secondary materials
from mineral processing to be co-processed with normal raw materials in
beneficiation operations which generate Bevill exempt wastes, without
changing the exempt status of the resulting Bevill waste, provided that
legitimate recovery of the mineral processing secondary material is
occurring, and provided that primary ores and minerals account for at
least 50 percent of the feedstock. The Agency voiced concern at
proposal that the addition of mineral processing secondary materials
into a Bevill exempt extraction/beneficiation process could have the
potential to increase the risk of the resulting wastes. The Agency
proposed adding a condition--the use of a significantly affected test
(similar to the existing test used in the Burning in Industrial
Furnaces (BIF) Rule (see 40 CFR 266.112))--as a means of assuring that
resultant Bevill wastes were not adversely impacted by co-processing.
EPA also considered simply limiting eligibility for Bevill status to
situations where Bevill raw materials comprised the sole feedstock to
the process.
After considering public comments, the Agency has decided to adopt
the general approach proposed in January 1996, with one change. The
Agency now does not believe that the use of the ``significantly
affected'' test would appreciably reduce risks posed by the resulting
wastes, and the Agency is concerned that it would severely disrupt
legitimate recycling practices within beneficiation and mineral
processing industries. Even in situations where a constituent may
increase due to recycling, the increase may not be environmentally
significant, may be balanced by the lowering of other constituents, or
may be off-set by having to dispose of the material and utilize
additional raw material feedstocks.
b. Uniquely Associated. The Bevill exclusion for the primary metal
sector is limited to extraction/beneficiation wastes and 20 mineral
processing wastes. Under Section 3001(b)(3)(A)(ii) of RCRA, the Bevill
exclusion is available for ``solid waste from the extraction,
beneficiation and processing of ores and minerals.'' Under the Agency's
longstanding interpretation, a waste must be ``uniquely associated''
with mining and processing of ores and minerals to be subject to the
Bevill exclusion. The Agency currently uses a qualitative approach (see
45 FR 76619 and 54 FR 36623) to determine if a waste is uniquely
associated. Because of public interest in how the Agency makes these
determinations, the Agency sought comment on alternative approaches for
making ``uniquely associated'' determinations.
The Agency is retaining and clarifying in this rule its use of its
qualitative approach. The Agency recognizes that determining whether a
particular waste is uniquely associated with extraction, beneficiation,
and processing involves an evaluation of the specific facts of each
case. While the Agency discussed, in the May 1997 proposal, several
options that would establish a bright line for making this
determination, the Agency is concerned that any of these tests could
potentially be either over- or under-inclusive of the wastes that, in
EPA's view, are best viewed as uniquely associated.
In the Agency's view the following qualitative criteria should be
used to make such determinations on a case-by-case basis:
(1) Any waste from ancillary operations are not ``uniquely
associated'' because they are not properly viewed as being ``from''
mining or mineral processing.
(2) In evaluating wastes from non-ancillary operations, one must
consider the extent to which the waste originates or derives from
processes that serve to remove mineral values from the ground,
concentrate or otherwise enhance their characteristics to remove
impurities,
[[Page 28579]]
and the extent to which the mineral recovery process imparts its
chemical characteristics to the waste.
c. Bevill Mixtures. EPA first addressed mixing of hazardous wastes
with Bevill wastes in 1989 (see 54 FR 36622-23). That rule provided
that mixtures of Bevill wastes and listed wastes would be considered a
hazardous waste unless and until the mixture was delisted. A mixture of
Bevill waste and non-excluded characteristic hazardous waste, however,
would be considered hazardous if it exhibited a characteristic of the
non-excluded waste, but not if it exhibited a characteristic imparted
to it by the Bevill waste. As explained in the proposal, this Bevill
mixture rule was remanded to the Agency in Solite Corp v. EPA, 952 F.2d
472, 493-94 (D.C. Cir. 1991), and an emergency reinstatement of that
rule was vacated on procedural grounds in Mobil Oil v. EPA, 35 F.3d 579
(D.C. Cir. 1994). Today EPA is reinstating the 1989 Bevill mixture
rule. Under this 1989 rule, a mixture of a Bevill-exempt waste and a
characteristic hazardous waste (or a waste listed solely because it
exhibits a hazardous characteristic) is a hazardous waste if it
continues to exhibit the characteristic of the non-excluded waste.
Mixtures of Bevill wastes and other listed wastes are hazardous wastes
unless and until delisted. In addition, the act of mixing Bevill and
and non-Bevill wastes is subject to all normal Subtitle C consequences
(i.e., requires a permit if it constitutes treatment, storage of
disposal of hazardous wastes). EPA is adopting this approach because it
preserves the Bevill exclusion for mixtures that are characteristically
hazardous due to Bevill wastes, but nonetheless ensures that the Bevill
Amendment is not used to allow Bevill wastes to shield/immunize non-
Bevill hazardous wastes from regulatory controls that would otherwise
apply to those wastes.
d. Response to Court Remands Dealing with Other Issues Relating to
Mineral Processing and to Scope of Bevill Exclusion. (i) Toxicity
Characteristic Leaching Procedure (TCLP) The applicability of the TCLP
test to mineral processing wastes was challenged in Edison Electric
Institute v. EPA, 2 F.3d 438 (D.C. Cir. 1993). In that case the Court
held that the Agency must provide at least some factual support that
the mismanagement scenario assumed in developing the TCLP is plausible
when applied to mineral processing wastes or, alternatively, that
mining wastes are exposed to conditions similar to those simulated by
the TCLP, namely ``contact with some form of acidic leaching media''. 2
F. 3d at 447. EPA prepared a technical background document in support
of the January, 1996 proposal, which presented data on this issue. This
report concluded that mineral processing wastes had in the past been
co-disposed with municipal wastes, and due to the location of mineral
processing plants near large urban areas, it was plausible that these
wastes could be mismanaged with municipal wastes. EPA also solicited
information from the public that would help the Agency evaluate
industry comments that the Synthetic Precipitation Leaching Procedure
(SPLP) would provide a more accurate measure of how mineral processing
wastes behave in the environment. EPA received extremely limited data
from the public on this issue.
EPA has concluded, based on the information available to the Agency
and review of public comments, that co-disposal of mineral processing
wastes with municipal wastes is a plausible mismanagement scenario and
that, therefore, application of the TCLP to these wastes continues to
be appropriate. Moreover, comments from industry during the rulemaking
stated that certain facilities co-manage mineral processing wastes with
extraction and beneficiation wastes. Given the well-documented, acidic
nature of some extraction and beneficiation wastes, mineral processing
wastes disposed of in this manner may be subject to the kinds of low pH
conditions that are reflected in the TCLP. For this additional reason,
EPA finds that, under the plausible mismanagement standard articulated
in Edison Electric, application of the TCLP to mineral processing
wastes is appropriate in light of the information at the Agency's
disposal. While the Agency has received comments seeking to compare the
TCLP and the SPLP, the Agency has concluded, for reasons discussed
later in this preamble, that this information is not sufficient to
support adopting the SPLP as the appropriate test for mineral
processing wastes at this time.
The Agency recognizes that the methodology underlying the TCLP may
not reflect the variety of conditions under which some types of mineral
processing wastes are disposed. As a result, the Agency will undertake,
and within three to five years, conclude a review of the
appropriateness of using the TCLP and other leaching protocols in this
and other contexts.
(ii) Listed Hazardous Wastes. In American Mining Congress v. EPA,
907 F.2d 1179 (D.C. Cir. 1990), the Court found that the Agency's
record regarding the listings of five waste streams (K064, K065, K066,
K090, K091) did not adequately address certain issues raised in
comments. EPA indicated its intent not to list these five waste streams
in the January, 1996 proposal and placed a technical background
document in the docket enumerating the reasons for those decisions.
Many of these wastes are either no longer generated, or managed in a
fashion not warranting listing. EPA did not receive any comments
challenging those proposed decisions. Therefore, in this rule, EPA is
not listing these five smelting wastes as hazardous wastes. Instead,
EPA will rely on the RCRA hazardous waste characteristics to identify
those portions of the wastes requiring management as hazardous wastes.
(iii) Titanium Tetrachloride. In 1989, EPA determined that wastes
from the production of titanium tetrachloride were mineral processing
wastes. DuPont challenged this decision, and the Court remanded EPA's
decision for further consideration on grounds that the Agency's
decision was unclear (see Solite Corporation v. EPA, 952 F.2d at 494-95
(D.C. Cir. 1991)). EPA reevaluated data on wastes from the production
of titanium tetrachloride, and placed results of this reevaluation in
the docket in support of the January 1996 proposal. EPA also has met
with representatives of DuPont to discuss their process further. Based
on the Agency's reevaluation of this issue, EPA, in this rule,
concludes that iron chloride waste acid generated from the chloride-
ilmenite process of titanium tetrachloride production should be
classified as a mineral processing waste. The Agency has reached this
decision because this process significantly affects the physical/
chemical structure of the raw feedstock through chlorination and this
reaction creates new chemicals (iron chloride and titanium
tetrachloride gases). This meets the definition of mineral processing
rather than beneficiation.
(iv) Air Pollution Control Dust and Sludges Generated From
Lightweight Aggregate Production. Finally, since 1995, the Agency has
conducted reviews of air pollution control dust and sludges generated
from lightweight aggregate production, and has met with representatives
of this industry sector. The Agency also has issued a Report to
Congress and a regulatory determination on Cement Kiln Dust (CKD) (59
FR at 709, January 6, 1994 and 60 FR at 7366, February 7, 1995). EPA
has found that some aggregate kilns and cement kilns use hazardous
waste fuels to fire their units. Both types of facilities generate
dusts which may be either reintroduced
[[Page 28580]]
into the kiln or blended into the final product. While these dusts
rarely exhibit any of the RCRA hazardous waste characteristics, the
resultant product could be classified as hazardous waste due to the
``derived from'' rule if listed hazardous wastes are combusted. The
Agency is seeking a way to encourage the legitimate and environmentally
sound reuse of dusts, from both cement and lightweight aggregate
manufacture. In an effort to develop a consistent regulatory approach,
EPA, therefore, has decided to defer any decision on the Bevill status
of air pollution control dust and sludges generated from lightweight
aggregate production until evaluation of issues related to CKD and
lightweight aggregate dust handling, use, and disposal can be
completed.
e. Reexamination of Bevill Exempt Wastes. The May 12 proposal
sought general comment on whether a reexamination of some Bevill waste
is warranted given that additional risk assessment techniques and
additional information are available since making the 1986 Bevill
regulatory determination (51 FR at 24496, July 3, 1986) on mining and
the 1991 Bevill regulatory determination on mineral processing (56 FR
27300, June 13, 1991). EPA presented information from Superfund sites
and other sources which indicate that some Bevill wastes continue to
cause environmental damage (see environmental damage and risk technical
background documents placed in the January 1996, and April, 1997
dockets). The Agency also posed the question of whether some waste
streams require additional study or regulatory controls. Today's rule
is not making any changes to the status of Bevill exempt extraction and
beneficiation wastes or the 20 exempt mineral processing wastes.
C. Analysis of and Response to Public Comments
1. Jurisdiction
a. EPA Authority to Regulate Mineral Processing Secondary Materials
Reclaimed Within the Industry. Many industry commenters maintained that
EPA lacks jurisdiction over mineral processing secondary materials
reclaimed within the industry because such materials cannot be ``solid
wastes.'' The argument is straight-forward: a solid waste regulated
under RCRA must be a ``discarded material,'' RCRA section 1004 (27),
and these materials are not discarded. The comments suggest that, under
the case law, (in particular American Mining Congress v. EPA, 824 F. 2d
1177 (D.C. Cir. 1987) (``AMC I'')), these materials are part of an on-
going production process within the generating industry, and so cannot
be ``discarded.''
EPA disagrees that there is an absolute jurisdictional barrier to
regulating any management of mineral processing secondary materials
which are reclaimed within the industry. Although the AMC I court found
that, in some respects EPA's 1985 rules exceeded the statutory grant of
authority, subsequent judicial opinions have sharply limited the scope
of AMC I. The only absolute bar on the Agency's authority to define
recycled mineral processing secondary materials as solid wastes is for
``materials that are `destined for immediate reuse in another phase of
the industry's ongoing production process' and that `have not yet
become part of the waste disposal problem.''' American Mining Congress
v. EPA, 907 F. 2d 1179, 1186 (D.C. Cir. 1990) (``AMC II'') quoting AMC
I, 824 F. 2d at 1186.2) The case law likewise makes clear
that ``discarded'' is an ambiguous term, within EPA's discretion to
interpret, consistent with RCRA's overall goals and purposes. AMC II,
907 F.2d at 1179; American Petroleum Inst. v. EPA, 906 F.2d 726,
741(D.C. Cir. 1990).
---------------------------------------------------------------------------
\2\The other cases which have similarly stressed this narrow
reading of AMC I are American Petroleum Inst. v. EPA, 906 F. 2d 726,
741 (D.C. Cir. 1990); Shell Oil v. EPA, 950 F. 2d 741, 755-56 (D.C.
Cir. 1991); Chemical Waste Management v. EPA, 976 F. 2d 2, 14 (D.C.
Cir. 1992); United States v. Ilco, Inc., 996 F. 2d 1126, 1131 (5th
Cir. 1993); and Owen Electric Steel Co. v. Browner. 37 F. 3d 146,
149-50 (4th Cir. 1994).
---------------------------------------------------------------------------
Applying this test, today's rule states that any mineral processing
secondary materials which are being reclaimed immediately within the
mineral processing industry (or within beneficiation) are not a solid
waste. However, as explained below, EPA does not view mineral
processing secondary materials which have been removed from a
production process for storage as being ``immediately reused,'' and so
such materials are not automatically excluded from jurisdiction. EPA
reiterates that there is a jurisdictional bar against regulating the
actual production process (see Steel Manufacturers Association v. EPA,
27 F.3d 642, 647 (D.C. Cir. 1994); EPA also interprets the holding of
AMC I to mandate this result), so today's rule does not assert
authority over mineral processing production units. However, if
production units are also used to dispose of hazardous wastes, those
units are subject to RCRA Subtitle C.
With respect to mineral processing secondary materials which are
stored before being reclaimed at mineral processing or beneficiation
facilities--i.e. that are not being immediately reused--the Agency has
established a conditional exclusion from the definition of solid waste,
the conditions being designed to assure that management of these
materials are not ``part of the waste disposal problem.'' The main
condition is that mineral processing secondary materials not be stored
on the land (except for storage on approved pads) and not be stored in
disposal units.
In considering the question of scope of jurisdiction, it is useful
to remember that this rule applies to a continuum of potential recovery
practices. At the one end of the continuum, where EPA's authority is
most certain, would be the situation where mineral processing company A
sends its secondary materials to unrelated mineral processing company B
processing a different metal than company A. The case law indicates
that EPA retains discretion to classify the material as a solid waste.
API, 906 F.2d at 741 (transfer of steel industry dust to a metal
reclaimer processing exclusively steel industry secondary materials can
involve a RCRA solid waste). It should be remembered that EPA views
``mineral processing'' broadly in this rule to include all primary
mineral processing sectors (see, e.g., the Agency's 1996 Identification
and Description of Mineral Processing Sectors and Waste Streams). This
document identified 41 different sectors involved in primary mineral
processing. Primary mineral processing involves changing the physical
and chemical structure of ores and minerals. For example, mineral
processing includes the production of steel and the production of gold.
These sectors generate very different types of wastes and recycle them
under different conditions. Thus, the API principle of no absolute
jurisdictional bar applies.
Points further in on the continuum would be if companies A and B
process the same metal but are unrelated companies (also potentially
within the API framework), and where companies A and B are under common
ownership but not at the same site. The point on the continuum closest
to on-going production is where secondary materials are reclaimed at
the generating site, but where the process is non-continuous due to
storage of materials. Immediate recovery on-site without storage would
then mark the other end of the continuum, and would illustrate when
materials are immediately reused within a continuous process, and so
[[Page 28581]]
absolutely outside Subtitle C jurisdiction.3
---------------------------------------------------------------------------
\3\ The Agency indicated in its January 1996 proposal that some
lower value mineral processing secondary materials are from
ancillary production operations and that those materials were often
placed in land-based storage units. 61 FR at 2340. Industry comments
challenged this discussion as over broad and misplaced. Upon review,
the Agency acknowledges that mineral processing facilities generate
a wide range of secondary materials, which also have a wide range of
values to the facility owner.
---------------------------------------------------------------------------
EPA believes that it has discretion to consider whether any of
these situations short of immediate reuse involve solid wastes, this
discretion being limited by the second part of the Court's articulated
test: is the non-continuous management of the mineral processing
secondary materials part of the waste disposal problem. Thus, EPA in
today's rule has focused on the storage of these materials. The leading
authority for this approach is AMC II, where the Court found that
secondary materials generated and reclaimed on-site could be classified
as solid wastes because they were stored in surface impoundments. 907
F. 2d at 1186. The case involved a single plant which stored its
secondary materials --sludges--in an impoundment before reclaiming all
of the accumulated sludges in its own smelting process. 50 FR at 40292,
40296 (October 1985). Several comenters argued that AMC II involved
only specutlative accumulation. This is not the case. The wastes
generated in the impoundment were actually recycled 100 percent, not
stored with expectation of recycling. 50 FR at 40292, 40296; Brief of
Petitioner Amercian Mining Congress in AMC II (filed March 30, 1990)
pp. 18, 29. The Court nonetheless held that the sludges were discarded,
stressing the special sensitivity in RCRA to land-based units such as
surface impoundments, and explaining how storage of secondary materials
in such units can be part of the waste disposal problem (907 F. 2d at
1186-87). Thus, EPA believes that mineral processing secondary
materials stored on the land are discarded.
Land-based storage of mineral processing sludges, spent materials,
and by-products can be viewed by EPA as being part of the waste
disposal problem. There is no dispute that a considerable amount of
mineral processing secondary materials contain hazardous constituents
that can threaten human health and the environment (see U.S. EPA,
Office of Solid Waste, Human Health and Environmental Damages from
Mining and Mineral Processing Wastes, 1995, and Damage Cases and
Environmental Releases, 1997). Land-based units, and impoundments in
particular, have certain inherent indicia of discard due to their
inability to prevent releases of contained materials. RCRA section
1002(b)(7); AMC II, 907 F.2d at 1187; 53 FR at 521, 525 (Jan. 8, 1988).
Surface impoundments pose essentially inherent risks of groundwater
contamination due to the hydraulic pressure created by the contained
liquids. Chemical Waste Management v. EPA, 919 F. 2d 158, 166 (D.C.
Cir. 1992). There are many damage incidents which involve storage of
mineral processing wastes in piles and surface impoundments, some of
which involve mineral processing secondary materials stored in land-
based units before eventual reclamation. These damage incidents confirm
that this potential harm is not hypothetical.
It should be noted that there is Agency precedent for the
limitation on land based storage as part of within-industry recycling
practices. The Agency established the principle of encouraging
recycling without allowing land-based storage at 40 CFR 261.4(a)(10).
Any wastes from coke by-product production are not solid wastes if
recycled to coke ovens conditioned on there being no land disposal from
the point of generation to the point of recycling. The Agency also has
promulgated a rule where recovered oil generated by any facet of
petroleum exploration, production, and retailing is not a solid waste
conditioned on no management of these materials in land-based units
(see 59 FR 58936, July 28, 1994). The Agency has also proposed to
extend this principle to a wider range of oil-bearing secondary
materials (see 60 FR 57747, 57753, November 20, 1995). The condition
likewise appears in current rules at 40 CFR 261.2(e)(iii) where it
qualifies the exclusion for materials returned for reclamation in the
process from which they are generated. The application of a no land
placement condition in today's rule is, therefore, building on an
established policy of encouraging recycling conditioned on no land
placement.
Putting this together, the Agency reads the statute as creating an
absolute jurisdictional bar in two situations: where mineral processing
or beneficiation is occurring, and where reclamation is continuous in
the sense that there is no interdiction in time--i.e. materials moving
from one step of a recovery process to another without a break in the
process, as for storage. As one moves back along the continuum, EPA has
discretion to interpret whether secondary materials may be considered
discarded. The Agency is exercising that discretion here by putting its
focus on whether the reclamation, or more precisely, the storage which
precedes reclamation, is part of the waste disposal problem because it
involves storage which can be and has been part of that problem.
b. Are There Limits on Jurisdiction? (Response to Public Interest
Group Position). In contrast, representatives of public interest groups
argued that the Agency's authority was essentially unlimited. They
believe that the authority should be extended, at a minimum, to all
land-based units because such units are a type of disposal unit. With
respect to mineral processing secondary materials that are managed in
tanks, containers, or buildings (i.e. in other than land-based units),
EPA sees no principle that compels the materials to be designated as
solid wastes. As explained above, case law indicates that EPA has
discretion to interpret which materials are ``discarded'' consistent
with the overall statutory objective, API, 906 F.2d at 742. These
objectives include not only assuring safe management of hazardous
wastes, but also ``encouraging . . . materials recovery, [and] properly
conducted recycling and reuse . . . .'' RCRA section 1003(a)(6). EPA's
construction in today's rule, which rests largely on the distinction
between land-based storage and more environmentally protective storage
of secondary materials, is consistent with this object by encouraging
``properly conducted recycling. . . .'' In addition, EPA reads the case
law as allowing the Agency to make reasonable distinctions among
secondary material handling practices in determining when a particular
recycling practice may be considered to be ``part of the waste disposal
problem.'' Finally, as EPA explained at proposal, there are potential
jurisdictional constraints given that the mineral processing industry
exists to recover mineral values from an initial raw material, and some
aspects of recovery of mineral values from secondary materials can be
like sequential processing of an initial raw material. 61 FR at 2342.
Where there is no obvious element of discard present, such as land-
based storage, the Agency does not believe that it should exercise its
interpretive discretion to assert authority.
With respect to intra-industry reclamation practices involving
land-based units, EPA largely is asserting authority. EPA proposed a
series of conditions that would have allowed land-based storage units
on the idea that there were certain unique necessities within this
industry compelling use of such units. 61 FR at 2341. However, as the
rulemaking progressed, it became
[[Page 28582]]
apparent that there are no such production-related necessities. Agency
reevaluation of mineral processing secondary material volumes indicated
that, in addition to volumes being lower than EPA initially believed,
comparison to volumes of other industrial hazardous wastes indicated
that these wastes were often higher in volume than mineral processing
secondary materials and were being stored off the land. Consequently,
the Agency is claiming authority over most land-based storage units.
The Agency is not, however, asserting authority over piles resting
on pads determined by a state or EPA to be protective. The reasoning is
similar to that for not claiming authority over within-industry
secondary materials stored in tanks, containers or buildings. Such
materials need not be viewed as ``part of the waste disposal problem,''
and so, given the intra-industry recycling, need not be considered
``discarded.'' The practice also can be viewed as a type of ``properly
conducted recycling'' which should be encouraged. Again, EPA views this
determination to be within its interpretive discretion.
EPA also disagrees that it is compelled to assert control over
land-based units that are actual production units, i.e. that actually
recover product. The Agency is aware of only two land-based units which
recover metals: gold heap leach piles and copper dump leach piles.
Under prior rulemakings (54 FR 36592 and 55 FR 2322), the Agency has
defined these land-based units as extraction/beneficiation activities.
The Agency is unaware of any other land based process units which
actually recover metals. The Agency believes that regulating such units
could pose the possibility of interdicting actual production steps
which was the particular focus of the AMC I court. EPA notes, however,
that storage units which also make secondary materials more suitable
for actual recovery, such as equalization basins, can remain within
Subtitle C jurisdiction. These units, in the Agency's view, are not the
part of the process which actually produces an end product (such as the
smelter at a smelting facility). At most, they facilitate eventual
recovery. The Agency does not read the case law to say that such
storage units are in all cases outside the authority of Subtitle C.
EPA also is not asserting authority over mineral processing
secondary materials once they are removed from approved storage for
reclamation. Thus, should a mineral processing plant reclaim mineral
processing secondary materials after those materials are stored in
land-based units (i.e. the materials defined as hazardous wastes in
today's rule), they would no longer be solid and hazardous wastes. EPA
believes it would be counterproductive to retain the hazardous waste
status for mineral processing secondary materials entering reclamation.
If the materials remain hazardous wastes, for example, the smelting
process itself could be subject to Subtitle C regulation. EPA believes
that it retains discretion to classify the removed materials as no
longer being solid and hazardous wastes.
The Agency believes it has discretion to adopt this classification
notwithstanding the court's decision in American Petroleum Institute.
v. EPA, 906 F.2d 726 (D.C. Cir. 1990). In that case, the Court held
that EPA had adopted the so-called indigenous principle, whereby
secondary materials stopped being wastes at the point they were
utilized as feedstock in a production process related to the one that
generated it, without sufficient justification. 906 F.2d at 741-42.
However, in that case, EPA had made no attempt to determine which
materials were part of the waste disposal problem, and which were not.
Here, the Agency is making clear that storage on the land of mineral
processing secondary materials is the environmental concern, and that
reclaiming mineral processing secondary materials within the industry
is ordinarily a form of proper recycling which may permissibly be
encouraged. RCRA section 1003(a)(6).
EPA also notes that it is possible that no mineral processing
secondary materials will be placed in impoundments or in unapproved
piles. Under today's rule, if a facility wishes to use a pile for
storage (assuming the pile has not been adjudicated to be protective),
the wastes would first have to be treated to meet Land Disposal
Restrictions standards, probably rendering them unrecoverable. If an
impoundment is utilized, wastes need not be pretreated, but the
impoundment would have to meet minimum technology design standards and
be dredged annually (RCRA section 3005(j)(11) and 40 CFR section 268.5)
and, of course, ultimately obtain a RCRA permit. The Agency anticipates
that facilities will use a non land-based form of storage instead.
c. Immediate Reuse.4 In the May 1997 proposal, EPA
suggested a different way of defining absolute jurisdictional limits,
namely to say that secondary minerals generated by and ``immediately
reused'' within the mineral processing industry, were not solid wastes.
The reference to ``immediate'' was suggested as a means of interpreting
the ``immediate reuse in another phase of the industry's ongoing
process'' standard articulated in the case law. AMC I, at 824 F. 2d at
1185. The Agency proposed that secondary materials that were
legitimately recycled within 48 hours would be outside RCRA
jurisdiction, regardless of whether they were stored between process
steps (including storage in land-based units). See 62 FR at 26051.
---------------------------------------------------------------------------
\4\ It should be noted that EPA is not using ``reuse'' as a term
of art in this section of the preamble (i.e. is not using the term
as defined in 40 CFR 261.1(a)(5)), but rather is referring to
immediate reclamation of materials (i.e. material recovery) at a
mineral processing facility. The key concept here is actually
``immediate,'' which EPA is using to interpret the phrase
``continuous process'' used in the case law.
---------------------------------------------------------------------------
Industry and public interest groups both opposed the use of the 48-
hour time limit included in the January 1996 proposal to define
immediate reuse. Industry renewed its categorical objections based on
AMC I, and noted that many secondary materials are legitimately
reclaimed long after they are generated and the time period between
generation and reclamation in no way affected their value. For example,
commenters stated that the gold industry generates retort slags which
contain gold values. Comments stated that these slags are stored off
the ground for periods up to six months after which they are
reintroduced into their recovery process.5
---------------------------------------------------------------------------
\5\ It should be noted that since no land-based storage is
involved, these gold slags are not solid wastes under the final rule
in any case (assuming that the recovery is legitimate and that the
other conditions in the rule are satisfied).
---------------------------------------------------------------------------
Public interest groups objected to the 48-hour limit on the basis
that an absolute waiver of RCRA jurisdiction based on time does not
translate to any reduction of environmental risk. Public interest
groups also noted that the Court in AMC II granted jurisdiction to
units holding secondary materials with the propensity to leak, and that
the Court's opinion would extend to all land placement, since the
continuous placement of materials on piles or other land-based units
would result in the same ``discard'' underlying the Court's opinion.
Although the Agency necessarily accepts that materials immediately
reused in another phase of the industry's ongoing production process
are beyond EPA's jurisdiction, AMC I, 824 F.2d at 1185, the Agency is
not adopting in today's rule the proposed 48-hour approach to define
immediate reuse. The Agency is defining ``immediate reuse'' as the
continuous recirculation of secondary materials
[[Page 28583]]
back into recovery processes without prior storage. The plain reading
of the words ``continuous,'' 824 F.2d at 1193, and ``immediate''
preclude storage. Storage by its very nature means that processes are
not continuous; rather, storage means that materials are generated
which must be held apart for some period of time prior to reentry into
a process. Storage, therefore, breaks the continuous and immediate
nature of production and reentry. In addition, land-based storage units
have inherent elements of discard. AMC II, 907 F. 2d at 1186-87.
The definition of ``immediate reuse'' in today's rule does not bar
storage prior to recycling. Mineral processing industries will be able
to store and recycle their mineral processing secondary materials
outside RCRA Subtitle C requirements if they do so while meeting the
conditions of the exclusion from the definition of solid waste
contained in today's rule.
In the May 1997 proposal, the Agency discussed the possibility that
some molten metals that spill onto the ground could be classified as
materials undergoing immediate reuse (see 62 FR at 26051). The Agency
noted that copper reverts (refined copper material) can be spilled in
the process of being transferred from one part of the smelting process
to another. Such reverts are picked up as soon as they can be safely
handled and are placed directly back into the smelting process. The
Agency has reviewed smelting processes in other metal sectors and finds
that spillage from ladles is common and that these materials are
routinely picked up within a short time and placed back into the
process. The Agency thus concludes that molten metal spilled onto
smelter floors is not a solid waste if it is picked up as practical
(given heat and worker safety factors) and is then placed back into the
smelting process. Such a material is not a secondary material (i.e.
sludge, by-product, or spent material), but rather remains in process.
This interpretation parallels existing rules, which say that a spilled
commercial chemical product is not a solid waste if it is recycled
within a reasonable amount of time (see 40 CFR 261.33 and 55 FR at
22671).
Industry commenters stated that spent smelter brick was similar to
reverts since they are often returned back into recovery processes. If
such spent bricks are stored before being recycled, they are not being
immediately reused (nor are they still in process, since they are spent
and physically removed). As noted in the Agency's May 1997 proposal,
copper flue dusts, also are stored sometimes and not immediately
recycled. Flue dusts not meeting the immediate reuse definition are
defined as mineral processing secondary materials (usually a sludge,
since these dusts are usually air pollution control residue) and would
be eligible for the conditional exclusion to the definition of solid
waste.
d. Relation to the Current Regulatory Definition of Solid Waste.
(i) Distinctions among Sludges, By-products, and Spent Materials. The
existing regulatory definition of solid waste classifies metal recovery
operations as a type of reclamation activity, and then states that
certain secondary materials being reclaimed are, or are not, solid
wastes depending on the type of material being reclaimed. Spent
materials being reclaimed are solid wastes, while characteristic
sludges and by-products being reclaimed are not solid wastes. See,
generally, 40 CFR 261.2(c)(3) and 50 FR at 633-34, 639-41 (January 4,
1985).
As EPA noted at proposal, these distinctions among types of
secondary materials being reclaimed are not needed because they are not
directly based on environmental distinctions. 61 FR at 2342. In this
industry, at least, the distinctions do not relate to which of these
materials may be part of the waste disposal problem.6 The
more environmentally meaningful distinction, and the one adopted here,
is between land-based storage and storage in tanks, containers, and
buildings.
---------------------------------------------------------------------------
\6\ Put another way, the fact that a mineral processing
secondary material is a sludge, rather than a spent material or by-
product, does not convey any meaningful information as to the types
of risks the material might pose if reclaimed.
---------------------------------------------------------------------------
In this rule, the Agency is, therefore, eliminating the regulatory
distinctions between by-products, sludges and spent materials from
mineral processing when these materials are reclaimed. Thus, under the
amended rule, if any secondary material--sludge, by-product, or spent
material--is legitimately reclaimed within the mineral processing
industry, it is not a solid waste as long as all other conditions to
the exclusion to the definition of solid waste are satisfied. EPA
believes that this principle not only should encourage properly
conducted recycling within the industry, but also fulfills an Agency
objective of reducing some of the complexity in the existing regulatory
definition of solid waste.7
---------------------------------------------------------------------------
\7\ EPA does note the potential anomaly that non-mineral
processing secondary materials, at least for the moment, will be
regulated in some cases stringently than those generated and
reclaimed within the mineral processing industry. This could come
about because non-mineral processing industry sludges and by-
products would still not be solid wastes if reclaimed, and so could
be stored in land-based units before reclamation without being solid
wastes. EPA has chosen, however, to address the broader issues
regarding the regulatory definition of solid waste in a different
rulemaking effort, which is proceeding on a different schedule from
this rule. EPA believes that if may legitimately proceed one step at
a time on these issues, and so is not precluded from making needed
changes to the regulatory definition that affect only discrete
industry segments, in this case, the mineral processing industry.
---------------------------------------------------------------------------
(ii) Other existing regulatory exclusions. The existing regulatory
definition of solid waste also contains a series of exclusions in 40
CFR 261.2(e), two of which could apply to the mineral processing
industry. Section 261.2(e)(1) (ii) excludes from the definition of
solid waste sludges, by-products and spent materials (i.e. secondary
materials) which are ``used or reused as effective substitutes for
commercial products.'' An example could be mineral processing acid
plant blowdown substituting for commercial acid in another process
(either mineral processing or a process in a different industrial
category).8 Commenters from industry questioned whether this
provision is affected by the amendments relating to mineral processing
secondary materials being reclaimed. The answer is that the provision
remains as an independent basis for excluding secondary materials from
Subtitle C. EPA did not propose to change it, and the issues involved,
in any case, would be broader than the present proceeding since the
basis for the exclusion does not rest on the notion of a continued
process within an industry, but on comparability of secondary and
virgin materials (see 50 FR at 619-20 and 637-41 (Jan. 4, 1985)).
---------------------------------------------------------------------------
\8\ This example assumes that legitimate recycling is occurring.
---------------------------------------------------------------------------
The second existing exclusion, found at 261.2(e)(1)(iii), does
overlap with the present rule. The exclusion is for secondary materials
``returned [as a substitute for feedstock materials] to the original
process from which they are generated, without first being reclaimed or
land disposed.'' An example could be an emission control dust from
primary smelting which is returned directly to the smelter for metal
recovery without any interim land disposal.
This provision is essentially consistent with, but also subsumed
by, today's final rule (with respect to the mineral processing
industry). It is subsumed because the activity involved, return as a
feedstock to a smelter, is a type of reclamation activity (see 50 FR at
639-40), the subject of this final rule.9 The existing rule
also contains a ``no
[[Page 28584]]
land disposal'' condition similar to the conditions in this final rule
(although today's rule excludes storage in piles in some circumstances,
and so is more flexible than the current 261.2(e)(1)(iii) in this
respect).
---------------------------------------------------------------------------
\9\ The exclusion for return of secondary materials as feedstock
was in fact adopted largely in order to exclude certain direct
reclamation practices in the mineral processing industry. 50 FR at
639-40.
---------------------------------------------------------------------------
In light of this overlap, EPA is adding language to
261.2(e)(1)(iii) to indicate that there are special provisions relating
to reclamation within the mineral processing industry (namely those
adopted in today's final rule), and that these provisions define the
scope of the exclusion for mineral processing secondary materials
generated and reclaimed within the industry, including those which are
returned to a mineral processing operation from which they are
generated without first being reclaimed.
Today's rule also does not alter the regulatory status of
recyclable materials that are reclaimed to recover economically
significant amounts of gold, silver, platinum, iridium, osmium,
rhodium, ruthenium, or any combination of them. 40 CFR 266.70. This
rule was established to encourage recycling of precious metals.
Commenters from the gold industry questioned whether this provision is
affected by the amendments relating to mineral processing secondary
materials being reclaimed. The answer is that today's rule redefines
which secondary materials generated and reclaimed within the mineral
processing industry are wastes, and so could exclude certain materials
reclaimed within the precious metal industry which are now defined as
solid wastes. However, to the extent any precious metal recovery
operations remain subject to regulation after today's rule, the
tailored regulatory provisions in 266.70 continue to apply.
e. Otherwise Excluded Mineral Processing Units Which Serve as
Disposal Units. As the Agency noted in the original proposal, land-
based units in the mineral processing industry not only can be related
to a recovery process but also can serve as repositories of
conventional wastes. 61 FR at 2340, 2342, 2347. That is, unusable
solids settle in surface impoundments or are left in piles and in many
cases these units become the ultimate repositories for these wastes.
Id.
Under current rules, when an operating product storage unit that is
a tank also contains a hazardous waste, the waste is not subject to
regulation until it exits the unit. 40 CFR section 261.4 (c). An
example would be a listed distillation column bottom remaining within
the distillation column.
Section 261.4(c) does not apply to hazardous wastes which
accumulate in land-based units. Thus, if wastes accumulate in piles or
impoundments, if those wastes are hazardous (i.e. are listed or exhibit
a characteristic of hazardous waste), and the wastes are not
legitimately recycled, then the units are Subtitle C regulated units
because they are being used to store or dispose of hazardous waste. The
Agency is not altering this long-standing principle in the present rule
(particularly given the central statutory finding that land-based
units, and especially surface impoundments, ``should be the least
favored method for managing hazardous wastes'; RCRA section
1002(b)(7)). Consequently, any process impoundment that holds un-
recycled hazardous accumulated solids, the impoundment is a regulated
unit (i.e. subject to Subtitle C) because it is disposing of a
hazardous waste. In addition, the same principle would apply to storage
or process piles, which likewise are ineligible for the 261.4(c)
exemption.
2. Scope of This Rule
This section of the preamble addresses the issue of which secondary
materials come from ``mineral processing'' operations, and so are
potentially within the scope of the conditional exclusion for mineral
processing wastes being reclaimed within the mineral processing
industry sector or in extraction/beneficiation operations. Newly
identified wastes from mineral processing also are subject to the LDR
prohibitions and treatment standards adopted today, and so this
preamble section also clarifies the applicability of these LDR
provisions.
a. Mineral Processing Wastes Covered by This Rule. The Agency's
1989 rule (see 54 FR 36592) applied the high volume/low toxicity
criteria to determine which primary mineral processing wastes would
retain the Bevill exclusion. This rule also clarified the Bevill status
of beneficiation operations. Those mineral processing waste streams not
meeting the high volume/low toxicity criteria are no longer Bevill
exempt wastes and are subject to regulation under Subtitle C (except 20
mineral processing waste streams noted at 40 CFR 261.4). Non-exempt
Bevill mineral processing wastes are ``newly identified,'' and are now
subject to the Land Disposal Restrictions, when land disposed.
Therefore, only ``newly identified'' characteristic hazardous mineral
processing wastes are potentially eligible for the conditional
exclusion from the definition of solid waste.
EPA established in the 1989 rulemaking the factors it would use to
determine whether a waste is generated from extraction/beneficiation
versus mineral processing (see 54 FR 36592, 36616-20). The Agency has
not and is not reopening this standard. However, EPA prepared and
noticed a report--Identification and Description of Mineral Processing
Sectors and Waste Streams--which tentatively applied this existing test
on a waste-by-waste basis to wastes from 41 mineral sectors (62 FR at
2354).
There are two principal issues raised by this report: its legal
status and its accuracy. First, the Agency has decided that the
Identification and Description of Mineral Processing Sectors and Waste
Streams report should be a guidance document. Thus, the Report is not a
rule, and it, therefore, cannot be invoked as a definitive
determination as to whether or not a particular waste is to be
classified as being from mineral processing or from extraction/
beneficiation. In addition, this report should not be viewed as an
exclusive list of mineral processing and associated waste streams:
other mineral processing waste streams may exist. Mineral processing
facilities are obligated to determine the Bevill status of their wastes
by utilizing applicable regulatory provisions, as clarified by the
criteria articulated in 1989 in the Federal Register preamble cited
above. Thus, because the document is guidance, no party could rely upon
that document as the definitive basis for a regulatory determination.
The Agency has fully evaluated comments suggesting that the report
contains factual inaccuracies, and believes that the Report, as now
revised after review of public comments, is accurate and should
therefore, provide useful guidance to the public. EPA disagrees with
comments contenting that the Agency adopted new criteria in reaching
the tentative conclusions set out in the Report. This is not the case--
the same general approach used in 1989 was applied in the Report, and
would have to be applied in making any actual regulatory determination.
One commenter argued that considering these determinations to be
advisory would violate EPA's duty under section 3001(b)(3) of RCRA, as
construed by the Court in EDF V. EPA, 852 F.2d 1316, 1331 (D.C. CIR
1988) to have made final determinations as to which mining wastes are
subject to the Bevill exclusion. According to this commenter, reaching
one conclusion at headquarters and a potentially different conclusion
at EPA regions or States would undermine the intent of the Court's
order in EDF. This commenter also asserted that such an approach would
effectively allow States to
[[Page 28585]]
regulate less stringently than EPA, in violation of sections 3006 and
3009 of RCRA.
EPA believes that these comments are erroneous. EPA fulfilled some
time ago its obligations under section 3001(b)(3) generally, and under
the EDF decision in particular, to define the scope of the Bevill
exclusion as it applied to mining wastes. See 51 Fed. Reg. 24496 (July
3, 1986); 54 Fed. Reg. 36592 (Sept. 1, 1989); 55 Fed. Reg. 2322 (Jan.
23, 1990); 56 Fed. Reg. 27300 (June 13, 1991). As discussed in those
notices and rules, EPA's regulatory determination did not obviate the
need to evaluate whether a particular waste was from mineral processing
which, unless one of the 20 identified special mineral processing
wastes, would not be exempt from Subtitle C under Bevill. Indeed, the
Agency has extensively discussed the distinctions between beneficiation
and mineral processing precisely to assist industry, EPA and the States
in making such case-specific determinations. See 54 Fed. Reg. 36618-
36619 (Sept. 1, 1989). Issuance of the Identification document in the
record for this rulemaking is simply intended to aid the industry and
regulators in making these decisions.
EPA acknowledges that the potential for inconsistent determinations
exist; for this reason, EPA headquarters has assisted regional offices
and States in making these determinations over the past decade. Section
3001(b)(3) does not, however, require the Agency to use rulemaking to
make each and every decision. Those decisions that are very fact-
specific may need to be made on a case-by-case basis using general
criteria articulated nationally by EPA. It is precisely because of the
fact-specific nature of such inquiries that EPA believes adopting the
guidance document as ``binding'' would not be appropriate. Finally,
nothing in EPA's approach is inconsistent with the RCRA requirement
that authorized State programs be at least equivalent to and no less
stringent than the federal program (see RCRA 3006 (b)).
b. Wastewater Treatment Surface Impoundments. EPA indicated at
proposal that wastes managed in wastewater treatment surface
impoundments would never be eligible for a conditional exclusion from
the definition of solid waste. 62 FR at 2348. (A wastewater treatment
surface impoundment is one whose ultimate discharge is regulated by the
Clean Water Act, and can include zero discharge facilities.) This
remains EPA's position, although the issue is no longer directly
relevant to the final rule because no impoundments are eligible for
exclusion. As the Agency noted at proposal, the essential purpose of
these units is waste management rather than production. 62 FR at 2348.
See also AMC II, where the D.C. Circuit held that wastewater treatment
surface impoundments can be classified as waste management units,
notwithstanding that all of the entrained solids in the unit were
eventually recycled as feedstock at the generating plant. 907 F. 2d at
1186-87.18 \10\
---------------------------------------------------------------------------
\10\ Waters in these impoundments are often recycled back into
processes for their value as water. Recycling of wastewaters may be
currently allowed under the effective substitute clause in the
regulatory definition of solid waste (see 40 CFR 261.2(e)(1)(ii)), a
provision unaffected by today's amendments. However, EPA reads AMC
II and its regulations to state that impoundments where some
wastewaters are returned to a process as an effective substitute for
a commercial product, but which also function as wastewater
treatment impoundments, would be regulated units (assuming there are
hazardous wastes in the unit). This is because the unit would
necessarily be functioning at least partially as a disposal unit
(since wastewaters are ultimately discharged). In addition, the
product storage regulatory exemption at 40 CFR 261.4(c) does not
apply to surface impoundments. Notwithstanding industry comments
that recycling of wastewater should be encouraged, the Agency notes
the stronger policy in RCRA to assure that surface impoundments
managing hazardous waste are managed so as to operate protectively.
AMC II, 907 F.2d at 1187 and sources there cited.
---------------------------------------------------------------------------
c. Materials Outside the Scope. This rule limits the use of the
conditional exclusion to the definition of solid waste to only those
secondary mineral processing materials generated within primary mineral
processing. The Agency identified over 40 mineral sectors which
potentially generate mineral processing secondary materials subject to
this rule. The scope of this rule is therefore quite broad. The Agency
did not receive comments opposed to the Agency including them in this
rule.
This rule also restricts the use of the conditional exclusion from
the definition of solid waste to characteristically hazardous mineral
processing materials. Thus, no listed hazardous wastes can qualify for
the conditional exclusion.
The National Mining Association (NMA) and the Metals Industry
Recycling Coalition submitted comments urging the Agency to broaden the
scope of the rule to include metal-bearing wastes generated outside of
primary mineral processing as well as allowing the reprocessing of
listed hazardous wastes. The Agency is not extending the exclusion
contained in this rule because the Agency did not propose addressing
wastes generated outside of primary mineral processing, since at the
time of proposal the Agency indicated that these wastes would be
addressed under a different rulemaking. While metal-bearing wastes
generated outside of primary mineral processing, and listed hazardous
wastes are not within the scope of this rule, the Agency will continue
to assess how best to encourage their legitimate recycling.
Commenters indicated they were unsure how this rule would affect
the application of 40 CFR 261.2 to secondary materials generated from
outside the mineral processing industry sector. As discussed earlier in
the preamble, today's rule does not amend Sec. 261.2 for any secondary
materials other than those generated within the mineral processing
sector. Thus, when fully implemented, a mineral processing facility can
use the conditional exclusion to the definition of solid wastes and can
utilize Sec. 261.2 to recycle other wastes.
3. Mineral Processing Secondary Material Volumes and Environmental
Damages
a. Volume of Secondary Materials and Large Volume Exemption. In the
Agency's May 1997 proposal, land placement of secondary mineral
processing materials would be prohibited except for materials exceeding
the high volume criteria (45,000 tons per facility waste stream per
year for solid wastes and one million tons per facility per waste
stream per year for liquids). The May 1997 proposal would have allowed
high volume secondary materials to be placed in land-based units if
those units meet the integrity standards noted in the January proposal
and meet other proposed conditions. In today's rule, the Agency is
adopting a no land placement condition for mineral processing secondary
materials without any volume exemption.
As noted in the May 1997 proposal (see 62 FR at 26049), the Agency
reevaluated the volumes of mineral processing secondary materials as a
result of comments submitted by public interest groups which asserted
that volumes of these materials were considerably less than EPA
originally believed (see Characterization of Mineral Processing Wastes
and Materials, U.S. EPA, 1998). Based on this reevaluation, the Agency
finds that mineral processing wastes are not generated in the high
volumes that we previously believed to be the case. EPA found that of
the 119 hazardous wastes streams it studied, 117 were generated in
volumes lower than the proposed high volume cutoff. Further, comments
from public interest groups on the Agency's May 1997 proposal indicate
that two remaining waste streams that
[[Page 28586]]
the Agency had classified as high volume may not in fact meet the high
volume cutoff. The Agency reassessed how it estimated the volumes of
these waste streams and acknowledges that it used very conservative
approaches to estimate these volumes. It is, therefore, possible that
none of the 119 waste streams studied meet the high volume cutoff. The
Agency proposed using the high volume cutoff as an indicator that land
storage may be an economic necessity because when volumes are high,
alternatives to land placement are costly and not practical. In fact,
the Agency now finds that mineral processing secondary materials are
generated at volumes where there is no reason that they cannot be
managed in non-land based units (except for solids placed on approved
pads).
Industry comments maintained that it is impractical to place
mineral processing secondary materials in tanks, containers, and
buildings. Based on the storage of similar volumes and types of
hazardous wastes generated in other industries, the Agency does not
agree. The Agency presented its analyses of volumes in its report
entitled, Characterization of Mineral Processing Wastes and Materials,
1997. This report noted that listed hazardous wastes, such as spent
potliners, and electric arc furnace dusts, are generated at volumes
which generally exceed that of mineral processing secondary materials
yet are stored in tanks and buildings. Further, this report noted that
the volumes generated by other industries that use tanks, containers,
and buildings to store hazardous wastes are not substantially different
than volumes generated by the mineral processing industry.
b. Reliability of Damage and Environmental Release Reports.
Industry commenters to the May 12, 1997 proposal sought to refute or
minimize the degree of contamination caused by the land storage of
mineral processing secondary materials. Despite these objections, the
Agency still finds that land-based storage and management practices of
mineral processing secondary materials and wastes can or may create or
exacerbate soil and ground water contamination.
The Agency issued two separate reports in 1995 and 1997 (Office of
Solid Waste, U.S. EPA, Human Health and Environmental Damages from
Mining and Mineral Processing Wastes (1995), and Office of Solid Waste,
U.S. EPA, Damage Cases and Environmental Releases (1997)) which
presented information on damage cases and environmental releases of
mineral processing and mining wastes. The data tended to fall into two
general classes: (1) information that illustrates that environmental
damages have occurred, and (2) information that discusses the types and
magnitude of mineral processing materials that have been released into
the environment. In some cases, a combination of feedstock, in-process
materials, secondary materials, and wastes contribute to ground water,
surface water, or soil contamination. Also, in some cases,
contamination occurred through episodic or continuing mismanagement of
hazardous and other solid wastes (e.g., commercial chemical spills).
Industry commenters objected to the use of these damage cases
contending that they reflect historic practices and not current
operations.
The Agency disagrees that storage of mineral processing wastes, and
in some cases secondary materials, on the ground, which was reflected
in these reports, no longer occurs. After careful reevaluation, the
Agency finds that the record and, in particular, these reports, clearly
indicate that the storage on the ground of mineral processing wastes
and secondary materials continues as a management practice and has
caused environmental damage or has the potential to do so. These
reports identify cases where mineral processing wastes and secondary
materials were eroded by rain, were carried by wind, or, in the case of
surface impoundments, migrated to contaminate ground water. The vast
majority of newly identified mineral processing wastes are liquids and
their placement in impoundments presents actual or potential threats to
the environment. The Agency concludes that placement of secondary
mineral processing materials in impoundments may contribute to the
waste management problem.11
---------------------------------------------------------------------------
\11\ Of course, those mineral processing facilities that have in
fact improved their storage practices for mineral processing
secondary materials being reclaimed by using tanks, containers, or
buildings instead of impoundments to store secondary materials would
be essentially unaffected by this rule, since such units would be
excluded from regulations.
---------------------------------------------------------------------------
EPA is also not impressed by comments stating that most of the
damage incidents involved wastes no longer utilized within a process,
not secondary materials awaiting reclamation, and therefore are
irrelevant to this rule. The damage incidents certainly show that when
hazardous mining and mineral processing wastes and mineral processing
secondary materials are stored in piles or in surface impoundments,
hazardous constituent releases and consequent damage has occurred in
this industry. Piles and impoundments do not automatically become safer
if the materials stored in them are secondary materials awaiting
recycling rather than wastes. Rather, the risk comes from the nature of
the storage unit.
The Agency compared the toxic and hazardous properties of newly
identified mineral processing wastes with a limited number of RCRA
listed hazardous wastes in the 1997 technical background document,
Characterization of Mineral Processing Wastes and Materials. This
report was used to support the May 1997 proposal. In order to easily
compare the listed waste leachate concentrations with the leachate
concentrations of the newly identified mineral processing wastes, a
combined mean and maximum range of chromium, cadmium, and lead
concentrations for the seven listed wastes were calculated. The mean
leachate concentrations for chromium, cadmium, and lead range from 6.03
mg/l to 273.23 mg/l, <0.01 mg/l="" to="" 117.5="" mg/l,="" and="" 1.47="" mg/l="" to="" 259.83="" mg/l,="" respectively.="" likewise,="" the="" maximum="" leachate="" concentrations="" for="" chromium,="" cadmium,="" and="" lead="" range="" from="" 12="" mg/l="" to="" 4250="" mg/l,=""><0.01 mg/l="" to="" 268="" mg/l,="" and="" 2.10="" mg/l="" to="" 1550="" mg/l,="" respectively.="" the="" report="" then="" compared="" the="" ranges="" in="" constituent="" concentrations="" exhibited="" by="" the="" listed="" wastes="" and="" the="" newly="" identified="" mineral="" processing="" wastes.="" the="" report="" states="" that="" 15="" of="" the="" 23="" mineral="" processing="" wastes="" exhibit="" leachate="" concentrations="" of="" chromium,="" cadmium,="" and="" lead="" at="" levels="" that="" are="" equal="" to="" or="" greater="" than="" those="" levels="" exhibited="" by="" the="" seven="" listed="" wastes.="" therefore,="" the="" agency="" has="" concluded="" that="" some="" mineral="" processing="" secondary="" materials="" exhibit="" hazardous="" properties="" similar="" to="" listed="" hazardous="" wastes,="" and="" have="" the="" same="" or="" greater="" potential="" of="" leaching="" metals="" into="" the="" environment="" when="" they="" are="" improperly="" placed="" on="" the="" land.="" in="" addition,="" mineral="" processing="" secondary="" materials="" often="" contain="" metal="" compounds="" and="" other="" constituents="" which,="" due="" to="" processing="" steps,="" become="" more="" mobile="" in="" the="" environment="" (see="" 54="" fr="" 36614-36619,="" september="" 1,="" 1989).="" by="" the="" very="" nature="" of="" mineral="" processing,="" heavy="" metals="" are="" continuously="" concentrated="" and="" waste="" streams="" tend="" to="" contain="" higher="" metal="" loadings="" than="" those="" found="" in="" raw="" ore.="" since="" the="" resultant="" wastes="" have="" higher="" concentrations="" of="" metals,="" they="" likewise="" have="" a="" higher="" potential="" to="" leach="" higher="" concentrations="" of="" metals="" into="" the="" environment="" if="" they="" are="" not="" adequately="" stored.="" finally,="" the="" record="" also="" shows="" that="" a="" wide="" range="" of="" mineral="" processing="" secondary="" materials="" are="" released="" into="" the="" environment.="" such="" releases="" do="" not="" necessarily="" mean="" that="" environmental="" [[page="" 28587]]="" damage="" has="" occurred;="" however,="" the="" agency="" believes="" it="" must="" take="" appropriate="" steps="" to="" minimize="" such="" releases="" to="" reduce="" the="" potential="" for="" damage="" to="" occur,="" just="" as="" the="" agency="" does="" with="" other="" hazardous="" wastes.="" rcra="" is="" a="" preventive="" statute,="" designed="" to="" assure="" safe="" management="" of="" hazardous="" waste="" from="" cradle="" to="" grave="" to="" prevent="" the="" need="" for="" remediating="" releases.="" based="" on="" the="" information="" noted="" above,="" the="" agency="" therefore="" has="" finalized="" in="" today's="" rule="" a="" ``no="" land="" placement''="" condition="" for="" the="" storage="" of="" mineral="" processing="" secondary="" materials.="" comments="" from="" public="" interest="" groups="" pointed="" out="" that="" a="" considerable="" amount="" of="" information="" shows="" that="" releases="" result="" from="" fugitive="" dusts="" and="" that="" control="" of="" dusts="" was="" not="" adequately="" addressed="" in="" the="" proposals.="" the="" agency="" agrees="" that="" the="" release="" of="" fugitive="" dust="" should="" be="" addressed="" and="" believes="" that="" placement="" in="" tanks,="" containers="" or="" buildings="" will="" adequately="" address="" this="" concern.="" mineral="" processing="" secondary="" materials="" stored="" in="" tanks="" or="" containers="" must="" be="" stored="" in="" a="" manner="" which="" effectively="" manages="" fugitive="" emissions.="" moreover,="" as="" at="" proposal,="" if="" the="" site-specific="" pile="" approval="" process="" is="" utilized,="" the="" possibility="" of="" harm="" via="" an="" air="" exposure="" must="" be="" considered,="" and,="" if="" necessary,="" controlled.="" see="" 62="" fr="" at="" 2372="" (proposed="" 261.4(a)(15)(iv)(a)(3)).="" 4.="" conditions="" to="" the="" exclusion="" in="" the="" january="" 1996="" and="" may="" 1997="" proposals,="" the="" agency="" sought="" comment="" on="" how="" to="" establish="" a="" conditional="" exclusion="" to="" the="" definition="" of="" solid="" waste="" which="" would="" encourage="" recycling="" of="" mineral="" processing="" secondary="" materials="" and="" be="" protective.="" in="" today's="" rule="" the="" agency="" is="" establishing="" a="" conditional="" exclusion="" to="" the="" definition="" of="" solid="" waste.="" the="" conditions="" relate="" to="" legitimacy="" of="" recycling,="" land="" placement,="" speculative="" accumulation,="" and="" notification,="" and="" are="" discussed="" below.="" a.="" legitimacy.="" it="" goes="" virtually="" without="" saying="" that="" only="" mineral="" processing="" secondary="" materials="" which="" are="" reclaimed="" legitimately="" would="" be="" excluded="" under="" today's="" rule.="" this="" is="" because="" sham="" recycling="" is="" simply="" waste="" treatment="" or="" disposal="" conducted="" under="" the="" guise="" of="" recycling.="" see="" u.s.="" v.="" self,="" 2="" f.="" 3d="" 1071,="" 1079="" (10th="" cir.="" 1993).="" the="" agency="" currently="" uses="" a="" qualitative="" approach="" for="" determining="" whether="" a="" material="" is="" being="" legitimately="" recycled.="" factors="" the="" agency="" considers="" typically="" relevant="" in="" making="" such="" determinations="" are="" found="" at="" 50="" fr="" 638="" (jan.="" 4,="" 1985);="" 53="" fr="" 522(jan.="" 8,="" 1988);="" 56="" fr="" 7145,="" 7185="" (feb.="" 21.="" 1991).="" use="" of="" these="" factors="" to="" assess="" whether="" a="" particular="" activity="" is="" to="" be="" viewed="" as="" recycling="" rather="" than="" treatment="" or="" disposal="" was="" emphatically="" sustained="" by="" the="" court="" in="" marine="" shale="" processors="" v.="" epa,="" 81="" f.="" 3d="" 1371,="" 1381-83="" (5th="" cir.="" 1996)="" and="" united="" states="" v.="" marine="" shale="" processors,="" 81="" f.="" 3d="" 1361,="" 1366(5th="" cir.="" 1996).="" the="" main="" issue="" in="" this="" rulemaking="" was="" whether="" the="" agency="" should="" develop="" quantified="" criteria="" for="" use="" in="" assessing="" legitimacy="" of="" reclamation="" activities="" within="" the="" mineral="" processing="" industry.="" the="" agency="" proposed="" quantitative="" criteria="" including="" the="" potential="" use="" of="" an="" ore="" grade="" cut-off,="" normal="" operating="" range,="" efficiency="" standard,="" and="" an="" economic="" test.="" 62="" fr="" at="" 2342-44.="" in="" addition="" to="" metal="" values,="" the="" agency="" also="" solicited="" comment="" on="" legitimate="" recycling="" of="" acid,="" water,="" and="" other="" values.="" the="" mineral="" processing="" industry="" noted="" in="" their="" comments="" that="" their="" products="" must="" meet="" international="" quality="" standards="" and="" they="" would="" not="" risk="" affecting="" product="" quality="" by="" introducing="" materials="" which="" would="" adversely="" affect="" that="" quality,="" and="" therefore="" that="" legitimacy="" can="" be="" assumed="" in="" essentially="" all="" cases.="" they="" also="" opposed="" the="" proposed="" quantified="" criteria.="" while="" the="" agency="" agrees="" that="" market="" forces="" generally="" may="" limit="" the="" introduction="" of="" materials="" which="" could="" adversely="" affect="" product="" quality,="" mineral="" processing="" facilities="" by="" their="" nature="" process="" large="" volumes="" of="" materials,="" epa="" is="" concerned="" that="" small="" volumes="" of="" wastes="" could="" be="" placed="" into="" processes="" without="" contributing="" mineral="" values="" in="" order="" to="" treat="" or="" dispose="" of="" them.="" obviously,="" this="" is="" not="" recycling,="" as="" noted="" by="" the="" court="" in="" u.s.="" v.="" marine="" shale="" processors,="" 81="" f.="" 3d="" at="" 1366.="" the="" agency,="" therefore,="" does="" not="" agree="" that="" there="" is="" no="" need="" to="" apply="" some="" type="" of="" reasonable="" legitimacy="" criteria.="" industry="" commenters="" also="" noted="" that="" application="" of="" quantitative="" criteria="" would="" be="" burdensome,="" are="" not="" necessary,="" and="" could="" not="" be="" effectively="" implemented.="" the="" agency="" agrees="" that="" implementation="" of="" the="" proposed="" quantitative="" tests="" would="" have="" required="" significant="" testing="" of="" materials="" (and="" resultant="" costs)="" and="" that="" due="" to="" uncertainty="" in="" evaluating="" test="" results,="" companies="" may="" decide="" not="" to="" recycle="" any="" materials="" to="" protect="" the="" bevill="" status="" of="" their="" resultant="" wastes.="" application="" of="" an="" ore="" grade="" cutoff="" criteria="" could="" restrict="" the="" gold="" industry's="" ability="" to="" recover="" gold="" values="" from="" secondary="" materials="" that="" contain="" gold="" at="" levels="" below="" those="" found="" in="" ore.="" such="" recovery="" could="" nevertheless="" be="" cost="" effective.="" industry="" commenters="" stated="" that="" the="" application="" of="" a="" normal="" operating="" range="" test="" would="" be="" difficult="" to="" implement="" since="" operating="" parameters="" at="" large="" mineral="" processing="" facilities="" change="" often="" related="" to="" differences="" in="" feed.="" there="" also="" was="" little="" support="" from="" industry="" for="" the="" proposed="" efficiency="" test="" because="" such="" facilities="" may="" be="" recovering="" a="" specific="" metal="" at="" one="" recovery="" rate="" while="" they="" are="" recovering="" other="" metals="" at="" a="" different="" rates.="" industry="" commenters="" also="" rejected="" the="" proposed="" use="" of="" an="" economic="" test="" because="" recycling="" need="" not="" be="" profitable="" to="" be="" legitimate.="" they="" specifically="" pointed="" out="" the="" cases="" where="" recycling="" was="" economical="" only="" relative="" to="" disposal,="" and="" yet,="" the="" company="" was="" legitimately="" reusing="" the="" recycled="" materials.="" for="" these="" reasons="" the="" agency="" has="" declined="" to="" adopt="" any="" of="" the="" proposed="" quantitative="" tests.="" in="" today's="" rule,="" the="" agency="" is="" not="" adopting="" quantitative="" criteria="" and="" will="" continue="" to="" use="" the="" qualitative="" approach="" for="" evaluating="" whether="" an="" activity="" is="" legitimate="" recycling.="" in="" addition,="" the="" agency="" believes="" that="" legitimate="" recycling="" may="" occur="" for="" reasons="" other="" than="" to="" recover="" metal="" values--="" recovery="" of="" acids,="" cyanide,="" or="" water,="" for="" example.="" with="" no="" quantitative="" tests="" for="" such="" recycling,="" the="" agency="" believes="" the="" qualitative="" criteria="" best="" cover="" the="" broad="" array="" of="" situations="" being="" addressed.="" situations="" most="" likely="" to="" be="" deemed="" sham="" recycling="" would,="" thus,="" be="" those="" involving="" low="" amounts="" of="" recoverable="" material="" plus="" the="" presence="" of="" non-contributing="" hazardous="" constituents="" in="" the="" waste="" (particularly="" hazardous="" constituents="" not="" otherwise="" present="" in="" the="" normal="" feedstock="" of="" the="" process).="" see="" generally,="" 53="" fr="" at="" 522(january="" 8,="" 1988).="" b.="" design="" and="" construction="" standards.="" in="" the="" january="" 1996="" proposal,="" the="" agency="" assumed="" that="" land-based="" storage="" of="" mineral="" processing="" secondary="" materials="" was="" a="" necessity="" within="" the="" mineral="" processing="" sector,="" and="" proposed="" three="" different="" types="" of="" conditional="" mechanisms="" whereby="" these="" land-based="" units="" could="" be="" deemed="" ``process="" units''="" that="" would="" be="" excluded="" from="" subtitle="" c="" jurisdiction.="" 62="" fr="" at="" 2345-48.="" more="" specifically,="" these="" alternative="" conditions="" were="" an="" environmental="" performance="" standard,="" a="" design="" and="" operating="" standard,="" or="" an="" ad="" hoc,="" site-specific="" standard="" developed="" by="" an="" epa="" region="" or="" authorized="" state.="" the="" environmental="" performance="" standard="" would="" have="" used="" a="" ground="" water="" protection="" standard="" as="" a="" determinant="" of="" whether="" a="" land-based="" unit="" was="" involved="" in="" discard.="" if="" ground="" water="" monitoring="" determined="" that="" there="" was="" an="" exceedance="" of="" the="" mcl="" (background="" levels="" if="" background="" exceeded="" the="" mcl)="" at="" a="" designated="" point="" of="" compliance,="" [[page="" 28588]]="" then="" the="" unit="" would="" be="" required="" to="" implement="" unit-specific="" corrective="" action.="" 62="" fr="" at="" 2345-46.="" the="" agency="" also="" proposed,="" in="" lieu="" of="" compliance="" with="" the="" ground="" water="" standard,="" design="" and="" construction="" standards.="" epa="" proposed="" that="" surface="" impoundments="" be="" constructed="" with="" a="" transmissivity="" equivalent="" to="" a="" 40="" mil="" geomembrane="" liner="" placed="" on="" top="" of="" 12="" inches="" of="" a="" material="" with="" a="" 10-5="" hydraulic="" conductivity.="" piles="" could="" be="" constructed="" on="" concrete,="" asphalt,="" or="" soil="" any="" of="" which="" would="" have="" to="" have="" the="" equivalent="" transmissivity="" of="" three="" feet="" of="" clay="" with="" 10-7="" cm/sec="" hydraulic="" conductivity.="" id.="" at="" 2346.="" the="" final="" alternative="" allowed="" for="" an="" authorized="" state="" or="" epa="" region="" to="" make="" a="" site-specific="" determination="" that="" the="" unit="" can="" be="" operated="" in="" a="" manner="" that="" is="" protective.="" the="" agency="" proposed="" this="" option="" to="" allow="" for="" flexibility="" because="" there="" are="" a="" range="" of="" site-specific="" characteristics,="" such="" as="" depth="" to="" groundwater="" and="" rainfall,="" which="" can="" affect="" the="" design="" of="" a="" unit="" and="" affect="" the="" risks="" posed="" by="" such="" units.="" id.="" at="" 2347.="" epa="" finds="" now,="" however,="" that="" the="" premise="" of="" volumetric="" necessity="" was="" mistaken="" (see="" the="" earlier="" section="" of="" this="" preamble).="" as="" such,="" the="" agency="" is="" adopting="" its="" traditional="" jurisdictional="" demarcation="" point="" of="" not="" allowing="" exclusions="" for="" land-based="" storage="" units.="" as="" discussed="" earlier,="" land-based="" storage="" units="" are="" so="" fraught="" with="" indicia="" of="" discard--including="" elements="" of="" outright="" disposal="" via="" both="" air="" and="" groundwater="" exposure="" pathways="" (borne="" out="" by="" damage="" cases="" as="" well),="" plus="" no="" longer="" being="" part="" of="" the="" actual="" production="" operation--that="" epa="" views="" this="" demarcation="" as="" strongly="" justified="" once="" it="" is="" clear="" that="" there="" is="" no="" necessity="" to="" use="" such="" units.="" the="" sole="" exception="" in="" the="" final="" rule="" which="" allows="" for="" conditional="" exclusion="" for="" a="" land-based="" storage="" unit="" is="" for="" piles="" resting="" on="" pads="" which="" are="" approved="" by="" an="" authorized="" state="" or="" epa="" region,="" as="" discussed="" in="" the="" section="" below.="" c.="" units="" eligible="" for="" conditional="" exclusion="" and="" conditions="" attached="" to="" such="" units.="" (i)="" tanks,="" containers="" and="" buildings.="" today's="" rule="" states="" that="" mineral="" processing="" secondary="" materials="" reclaimed="" within="" the="" industry="" can="" be="" excluded="" if="" they="" are="" stored="" in="" any="" of="" the="" following:="" tanks,="" containers,="" buildings,="" or="" piles="" resting="" on="" pads="" when="" such="" piles="" are="" evaluated="" and="" approved="" on="" a="" site-specific="" basis="" by="" an="" authorized="" state="" or="" epa="" region.="" (as="" noted="" in="" the="" may="" 12,="" 1997="" proposal,="" this="" is="" conceptually="" the="" same="" as="" the="" rule="" epa="" proposed="" for="" the="" oil-bearing="" secondary="" materials="" generated="" by="" and="" recycled="" within="" the="" petroleum="" industry.="" see="" 62="" fr="" at="" 26048="" (may="" 12,="" 1997)="" and="" 60="" fr="" 57753="" (november="" 20,="" 1995)).="" tanks,="" containers,="" building,="" and="" approved="" pads="" do="" not="" have="" to="" meet="" the="" design="" and="" operating="" standards="" for="" units="" storing="" rcra="" subtitle="" c="" wastes.="" epa="" also="" is="" adopting="" certain="" minimal="" conditions="" on="" these="" units'="" design="" to="" assure="" basic="" unit="" integrity="" and="" so="" assure="" that="" tanks,="" containers,="" and="" buildings="" do="" not="" serve="" as="" conduits="" for="" massive="" material="" release="" (i.e.="" disposal="" units).="" an="" acceptable="" tank="" must="" be="" free="" standing="" and="" not="" be="" a="" surface="" impoundment,="" and="" be="" manufactured="" of="" a="" material="" suitable="" for="" containment="" of="" its="" contents.="" an="" acceptable="" container="" must="" be="" free="" standing="" and="" be="" manufactured="" of="" a="" material="" suitable="" for="" containment="" of="" its="" contents.="" an="" acceptable="" building="" must="" be="" a="" man-made="" structure="" and="" have="" floors="" constructed="" from="" non-earthen="" materials,="" have="" walls,="" and="" have="" a="" roof="" suitable="" for="" diverting="" rainwater="" away="" from="" the="" foundation.="" a="" building="" may="" also="" have="" doors="" or="" removable="" sections="" to="" enable="" trucks="" or="" machines="" access.="" the="" agency's="" technical="" report="" non-="" rcra="" tanks,="" containers,="" and="" buildings,="" u.s.="" epa,="" 1998,="" provides="" examples="" of="" acceptable="" units="" for="" the="" storage="" of="" mineral="" processing="" secondary="" materials.="" epa="" disagrees="" with="" comments="" from="" public="" interest="" groups="" stating="" that="" nothing="" short="" of="" rcra="" subtitle="" c="" standards="" could="" assure="" protectiveness="" and="" so="" demonstrate="" that="" these="" non-land-based="" storage="" units="" were="" not="" part="" of="" the="" waste="" management="" problem.="" the="" plenary="" conditions="" urged="" by="" the="" public="" interest="" group="" commenters="" are="" indeed="" those="" necessary="" for="" protective="" management="" of="" hazardous="" wastes,="" but="" the="" agency's="" task="" here="" is="" different.="" it="" is="" to="" delineate="" discard="" from="" non-="" discard="" (i.e.="" wastes="" from="" non-wastes),="" and,="" as="" noted="" at="" proposal,="" not="" only="" is="" this="" a="" different="" test="" than="" determining="" protective="" waste="" management="" conditions,="" but="" there="" are="" jurisdictional="" constraints="" on="" the="" types="" of="" conditions="" epa="" can="" impose="" when="" considering="" the="" situation="" presented="" here,="" i.e.,="" secondary="" materials="" generated="" and="" reclaimed="" within="" a="" single="" industry="" sector.="" 62="" fr="" at="" 2342.="" thus,="" the="" conditions="" epa="" is="" adopting="" are="" designed="" to="" assure="" that="" these="" units="" are="" not="" essentially="" sieves="" functioning="" as="" means="" of="" disposal.="" the="" agency="" discussed="" its="" definition="" of="" non-rcra="" tanks,="" containers="" and="" buildings="" in="" its="" technical="" background="" document="" (see="" 62="" fr="" at="" 26050,="" non-rcra="" tanks="" containers,="" and="" buildings,="" 1997).="" industry="" commenters="" requested="" clarification="" on="" whether="" their="" smelter="" or="" refiner="" buildings="" would="" meet="" the="" definition="" of="" ``building''="" if="" tanks,="" containers="" or="" buildings="" were="" required.="" as="" set="" out="" in="" the="" final="" rule,="" a="" building="" is="" a="" structure="" with="" four="" walls,="" a="" roof,="" and="" floor="" constructed="" of="" non-earthen="" materials.="" smelter="" and="" refinery="" buildings="" are="" quite="" large="" and="" include="" floor="" areas="" which,="" in="" part,="" use="" earthen="" materials.="" as="" long="" as="" mineral="" processing="" secondary="" materials="" (i.e.="" those="" sludges,="" by-products,="" and="" spent="" materials="" which="" would="" otherwise="" be="" identified="" as="" hazardous="" wastes)="" are="" stored="" in="" those="" sections="" of="" the="" smelter="" and="" refinery="" building="" that="" do="" have="" floors="" constructed="" of="" non-earthen="" materials,="" these="" structures="" would="" qualify="" for="" the="" exclusion="" included="" in="" today's="" rule="" as="" non-rcra="" buildings.="" industry="" commenters="" also="" noted="" that="" the="" agency="" made="" reference="" to="" tanks="" and="" containers="" having="" to="" meet="" applicable="" industry="" standards="" for="" their="" construction="" and="" operation,="" such="" as="" those="" established="" by="" the="" american="" society="" of="" testing="" materials="" (astm)="" or="" the="" american="" petroleum="" institute="" (api)(see="" 62="" fr="" at="" 26050).="" they="" pointed="" out="" that="" api="" standards="" deal="" specifically="" with="" tanks,="" while="" astm="" standards="" relate="" more="" specifically="" to="" testing="" procedures.="" the="" commenters="" argued="" that="" units="" storing="" mineral="" processing="" secondary="" materials="" do="" not="" need="" to="" comply="" with="" these="" standards="" to="" be="" safe.="" the="" agency="" agrees="" that="" the="" references="" to="" applicable="" industry="" standards="" such="" as="" astm="" and="" api="" were="" overly="" broad="" and="" has="" not="" included="" them="" in="" today's="" rule.="" industry="" commenters="" requested="" clarification="" on="" whether="" tanks="" and="" containers="" needed="" covers="" to="" meet="" the="" condition="" of="" ``no="" land="" placement.''="" the="" agency="" expects="" that="" the="" storage="" of="" mineral="" processing="" secondary="" materials="" will="" prevent="" uncontrolled="" fugitive="" emissions.="" tanks="" and="" containers="" do="" not="" need="" covers="" as="" long="" as="" the="" materials="" stored="" in="" them="" are="" managed="" to="" reduce="" fugitive="" emissions.="" the="" facility="" operator="" will="" therefore="" need="" to="" determine="" if="" covers="" are="" needed="" to="" effectively="" control="" fugitive="" emissions.="" for="" example,="" tanks="" and="" containers="" placed="" inside="" buildings="" may="" not="" need="" covers.="" the="" gold="" and="" copper="" industries="" stated="" that="" their="" secondary="" materials="" would="" meet="" legitimacy="" conditions="" and="" that="" they="" do="" not="" need="" to="" store="" these="" materials="" prior="" to="" placement="" back="" onto="" gold="" heap="" leaches="" or="" copper="" dump="" leaches.="" the="" final="" rule="" indicates="" that="" process="" units,="" as="" opposed="" to="" storage="" units,="" are="" excluded="" from="" rcra="" subtitle="" c.="" epa="" believes="" that="" the="" heap="" and="" dump="" leach="" units="" are="" process="" units,="" notwithstanding="" the="" fact="" that="" they="" are="" land-based.="" this="" is="" because="" dump="" and="" heap="" leach="" piles="" simultaneously="" produce="" products="" and="" waste.="" the="" issue="" is="" also="" academic="" with="" respect="" to="" these="" units.="" this="" is="" because="" [[page="" 28589]]="" the="" agency="" determined="" that="" these="" units="" are="" extraction/beneficiation="" activities="" in="" 1986="" and="" reiterated="" that="" position="" in="" 1989="" (see="" 51="" fr="" 24496="" and="" 54="" fr="" 36592),="" and="" their="" bevill="" regulatory="" status="" is="" unchanged="" by="" today's="" rule.="" thus,="" if="" the="" heap="" leach="" pile="" becomes="" a="" disposal="" unit="" because="" wastes="" remain="" there="" permanently,="" those="" wastes="" presently="" have="" bevill="" status.="" the="" agency="" continues="" to="" be="" concerned="" that="" there="" may="" be="" environmental="" risks="" related="" to="" dump="" and="" heap="" leaching,="" but="" has="" determined="" that="" this="" rule="" is="" not="" the="" appropriate="" means="" to="" address="" those="" concerns.="" industry="" commenters="" also="" raised="" concern="" that="" under="" the="" ``no="" land="" placement''="" option,="" described="" in="" the="" may="" 1997="" proposal,="" they="" would="" no="" longer="" be="" able="" to="" place="" slags="" on="" the="" ground.="" this="" is="" an="" incorrect="" reading="" of="" the="" regulations="" and="" the="" proposals="" since="" at="" 40="" cfr="" 261.4(b)(7),="" iron="" and="" steel,="" copper,="" lead,="" zinc,="" and="" elemental="" phosphorus="" slags="" are="" all="" classified="" as="" bevill="" exempt="" mineral="" processing="" wastes="" and="" would="" not="" be="" affected="" by="" this="" rule.="" the="" management="" of="" these="" slags="" on="" the="" ground="" can="" continue="" as="" long="" as="" they="" meet="" other="" applicable="" federal="" and="" state="" regulations.="" (ii)="" solid="" mineral="" processing="" secondary="" materials="" resting="" on="" pads.="" as="" noted,="" epa="" proposed="" at="" 61="" fr="" 2346="" to="" allow="" land-based="" units="" which="" had="" been="" approved="" as="" protective="" on="" a="" site-specific="" basis="" by="" an="" authorized="" state="" or="" epa="" region.="" the="" agency="" is="" retaining="" a="" portion="" of="" that="" proposal="" in="" the="" final="" rule="" in="" order="" to="" allow="" solid="" mineral="" processing="" secondary="" materials="" resting="" on="" pads="" to="" be="" used="" for="" storage="" of="" mineral="" processing="" secondary="" materials="" being="" reclaimed="" within="" the="" industry.="" the="" agency="" defines="" ``solid="" mineral="" processing="" secondary="" materials''="" as="" those="" mineral="" processing="" secondary="" materials="" containing="" no="" free="" liquids.="" the="" provision="" functions="" effectively="" as="" a="" variance="" to="" allow="" conditionally="" excluded="" storage="" using="" pads="" to="" occur.="" industry="" comments="" pointed="" out="" that="" there="" are="" materials="" which="" can="" be="" placed="" on="" concrete="" or="" asphalt="" pads="" in="" a="" manner="" that="" provides="" the="" equivalent="" protection="" of="" a="" tank,="" container,="" or="" building.="" the="" agency="" is="" aware="" that="" in="" the="" arid="" southwest,="" the="" copper="" industry="" places="" materials="" on="" pads="" to="" dry="" them="" prior="" to="" their="" reentry="" into="" processes.="" the="" agency="" agrees="" with="" industry="" comments="" that="" a="" degree="" of="" flexibility="" is="" needed="" regarding="" the="" storage="" of="" solid="" mineral="" processing="" secondary="" materials="" in="" this="" sector,="" particularly="" given="" the="" number="" of="" such="" storage="" units="" presently="" used="" in="" arid="" conditions,="" and="" (to="" a="" lesser="" degree="" of="" importance)="" given="" the="" number="" of="" existing="" piles="" used="" by="" this="" industry="" which="" conceivably="" could="" be="" upgraded="" to="" operate="" protectively="" and="" for="" which="" a="" more="" flexible="" approach="" could="" be="">12
---------------------------------------------------------------------------
\12\ EPA has not provided for this type of site-specific
approval of land-based storage units in other rules providing for
conditioned exclusion from the regulatory definition of solid waste.
In some cases, this is because management of solids was not at issue
(proposed petroleum listing rule and rules on recovered oil), or the
industry sector did not use piles for solids management (steel
industry coke-byproducts listing rule). As noted in the text above,
EPA believes that there are certain factors peculiar to the mineral
processing industry that have persuaded EPA to allow for a site-
specific authorization process, but this provision should not be
considered to be a precedent for any other industry sector.
---------------------------------------------------------------------------
In today's rule EPA is adopting a provision whereby persons storing
only solid mineral processing secondary materials (those mineral
processing secondary materials containing no free liquids) on pads
prior to legitimate reclamation in a mineral processing process may
seek a determination from an authorized State or (if the pile is
located in an unauthorized State) EPA Region such that the unit is
approved as protective and materials stored in the unit are
conditionally excluded from the regulatory definition of solid waste
provided that the pad is not serving as a mode of discard.
Minimum design criteria for pads are as follows; (1) Pads must be
designed of non-earthen materials which are compatible with the
chemical nature of the mineral processing secondary material being
stored, (2) Pads must be capable of withstanding physical stresses
associated with placement and removal, (3) Pads must have run on/runoff
controls, (4) Pads must be operated in a manner which controls fugitive
dust, and (5) Owner/operators must conduct inspections and maintenance
programs to ensure the integrity of the pads.
The decision-maker would evaluate the application for storage on
pads against a general environmental performance standard: whether the
pad is located, designed, constructed and operated so as to be
protective of human health and the environment and is not used for
disposal. A broad benchmark of performance would be that the approved
pad must afford the same degree of protectiveness as non-RCRA tanks,
containers and buildings eligible for exclusion.
The decision-maker would have to consider potential releases via
groundwater, surface water, and air exposure pathways. Factors to be
considered for assessing the groundwater, surface water, air exposure
pathways are:
--The volume and physical and chemical properties of the secondary
material, including its potential for migration off the pad;
--The potential for human or environmental exposure to hazardous
constituents migrating from the pad via each exposure pathway, and the
possibility and extent of harm to human and environmental receptors via
each exposure pathway.13
\13\ As proposed, these general decision factors are drawn from
the environmental performance standard in the row-revoked 40 CFR
267.10.62 FR at 2347. Commenters noted correctly that Part 267 is no
longer codified, so that these requirements should not be placed in
regulatory language (or preamble) by means of a cross-reference to
the revoked provisions.
---------------------------------------------------------------------------
Thus, under this regime, a State could approve placement of solid
mineral processing secondary materials (those materials containing no
free liquids) on a pad where, after consideration of relevant exposure
pathways, a determination is made that the mode of storage will not
adversely affect human health and the environment, and where the
operator has demonstrated compliance with the minimum design and
operating criteria. Approval would be more problematic if a pad was
located in an area which experiences flooding, or in an area where
ground water was close to the surface and used for drinking water
purposes.
The Agency is confident that site-specific determinations can be
accomplished as part of existing State regulatory programs. The
situations eligible for this variance are considerably more
circumscribed than at proposal, and the decision criteria consequently
more focused, meeting some of the objections in comments from public
interest groups on the proposals. Today's rule only allows the
placement of mineral processing secondary materials that are physical
solids, and the rule also specifies certain minimum conditions such
pads must meet to be approved. Further, the rule identifies the factors
a State must consider prior to making such determinations. The Agency
will review a State's regulatory authorities it intends to use in
implementing this determination to assure that an authorized state can
effectively implement this element of the rule.
As proposed, EPA is requiring that there be opportunity for public
participation in the evaluation and approval process of pads storing
solid mineral processing secondary materials. 62 FR at 2366. The Agency
believes it is important that those citizens who may be directly
affected by these determinations be notified of them and
[[Page 28590]]
participate in the process, and notes further that this requirement is
fully consistent with RCRA's strong preference for public
participation. See RCRA section 7004(b).
On the other hand, EPA is not adopting any site-specific approval
process for storage of mineral processing secondary materials in
surface impoundments. The Agency has concluded that storage in
impoundments would likely lead to their contributing to the waste
management problem. Many damage incidents in this industry involve the
use of impoundments (see damage case on phosphorus impoundments in
Idaho). Furthermore, the Agency has determined that there are no
engineering or economic constraints on requiring liquid mineral
processing secondary materials to be placed in tanks.
d. Speculative Accumulation. In this rule, the Agency is
establishing a condition that mineral processing secondary materials
cannot be accumulated speculatively as defined in 40 CFR 261.1(c)(8).
EPA proposed this condition, 61 FR at 2372, and indeed, this condition
already applies to every other secondary material being recycled which
is excluded from being a solid waste. See, e.g., 261.2 (e). Industry
comments noted that the 12-month limit on speculative accumulation was
overly restrictive and that many mineral processing secondary materials
need to be stored until economic conditions warrant their recycling.
The Agency rejects these comments because no data were presented that
would indicate that the volumes of materials being generated could not
be efficiently recycled within a 12-month period. In the 12 years the
speculative accumulation provision has been in effect, the Agency is
unaware of other industries suffering economic burdens by complying
with the limits placed on speculative accumulation. Nor is EPA aware of
any mineral processing facility which has applied, pursuant to the
variance provision in 40 CFR 260.30(a) and 260.31(a) (which allow an
extension of the 12-month speculative accumulation period), to extend
the existing 12-month requirement for currently excluded mineral
processing secondary materials (like unlisted sludges and by-products).
The Agency infers that the existing 12-month requirement is not
imposing any type of significant constraint on this industry.
e. One Time Notification. EPA proposed that mineral processing
plants generating mineral processing secondary materials and utilizing
the conditional exclusion to the definition of solid waste provide EPA
(or an authorized State) with a one-time notification which describes
the mineral processing materials to be recycled and the recycling
processes being used. (See 61 FR at 2345). The Agency is finalizing
this provision in today's rule. It applies to any facility utilizing
the conditional exclusion.
Today's rule requires that the one time notification must specify
the types and amounts of mineral processing secondary materials to be
recycled and the location and type of unit storing mineral processing
secondary material. The notice should be submitted to the appropriate
EPA regional office or authorized State. An amended notification would
not be required unless the facility has significant process changes
affecting the generation, location, or recovery of mineral processing
secondary materials.
The reason the provision is needed is to assure that the
conditioned-exclusion approach in today's rule can be feasibly
implemented. To do so, EPA or States must know what secondary materials
are being stored, and where storage is occurring, in order to determine
whether the other conditions in the rule are being satisfied. As
described above, these other conditions are necessary to assure that
secondary material storage within the industry does not become part of
the waste management problem. In this very real sense, the notification
condition is likewise necessary to assure that the storage is not part
of the waste management problem, since notification is necessary to
successfully implement the other conditions.
Industry comments opposed this condition, not so much on grounds of
unreasonable burden, but based on the argument that the Agency lacks
legal authority over non-waste activities. Since EPA finds that the
notification condition is an integral part of a group of conditions
necessary to assure that storage of these hazardous secondary materials
does not become part of the waste management problem, EPA has legal
authority to adopt it. In addition, the Agency notes that RCRA section
3007(a) provides authority to enter facilities and obtain information
needed to assist in the enforcing of provisions of Subtitle C. This
provision can reasonably be read to apply to gathering information to
determine whether or not a particular hazardous secondary material is a
waste. The notification condition obtains this same type of information
by regulatory condition. The Agency thus believes that section 3007(a)
(implemented here by rule, pursuant to the Agency's general rulemaking
authority under RCRA section 2002(a)) likewise provides authority to
adopt this condition.
In the January 1996 proposal, the Agency solicited comment on
whether a Facility Operating Plan should be required for facilities
that generate, store, or process hazardous mineral processing secondary
materials. (See 61 FR at 2345) Under this approach, a Facility
Operating Plan would include: a spill prevention plan and procedures;
types, quantities, and analysis of recycled materials; product
specifications; speculative accumulation and storage requirements;
closure plan; and record keeping and reporting for off-site shipments.
In today's rule, the Agency is not requiring the preparation of such a
plan. This requirement is not necessary given the burden of proof under
existing 40 CFR section 261.2(f) that a facility must meet to comply
with the conditions of legitimacy, containment, and speculative
accumulation. The Agency does, however, strongly encourage facilities
to develop a plan or at least components of a plan as part of
responsible environmental management.
5. Bevill Related Issues
a. Uniquely Associated. Under the Agency's longstanding
interpretation of the Act, the Bevill amendment applies to special
wastes that are uniquely associated with extraction/beneficiation and
certain mineral processing activities. Because the decision whether a
particular waste is uniquely associated may determine whether a
particular waste is subject to Subtitle C controls, the Agency believed
that it was important and useful to receive public input regarding the
manner in which EPA and authorized States apply this principle and
solicited comment regarding the criterion for determining whether a
waste is uniquely associated with mineral operations. The Agency has
described non-uniquely associated wastes at 45 FR 76619, November 19,
1980 and 54 FR 36623, September 1, 1989. In the May 1997 proposal, the
Agency noted examples of non-uniquely associated wastes, which include
spent solvents, pesticide wastes, and discarded commercial chemicals.
As stated in the May 1997 proposal, in the Agency's view, these wastes
are logically viewed as not being ``from'' extraction, beneficiation,
or mineral processing, and, therefore, are not subject to the Bevill
exclusion. (See 62 FR 26054-56, May 12, 1997).
In May 1997, the Agency proposed several alternative approaches to
determining whether a waste was uniquely associated. One option to
determine if a waste is uniquely
[[Page 28591]]
associated was the simple application of the high volume threshold used
in the Agency's 1989 rulemaking. Under this option, the volume
criterion would obviate the need to consider the uniquely associated
principle further.
The Agency based this option on the fact that Congress and the
courts have established that only large volume special wastes should be
eligible for the Bevill exclusion (62 FR 26041, May 12, 1991;
Environmental Defense Fund v. EPA, 852 F.2d 1316 (D.C. Cir 1988), cert.
denied 489 U.S. 1011, Solite Corporation v. EPA, 952 F.2d 473, 494-495
(D.C. Cir 1991)). The Agency reasoned that a large volume criterion is
simple to apply and is consistent with the broad parameters of
Congressional intent. Further, this approach would help prevent
additional toxic constituents from being disposed with Bevill wastes,
potentially encouraging recycling, and may result in reduction of
cleanup costs.
Industry commenters voiced strong opposition to the use of a volume
criterion to determine whether a waste was uniquely associated.
Commenters stated that the Bevill exclusion was intended to exempt all
mining wastes, regardless of their volume or toxicity. As the
regulatory history of EPA's implementation of the Bevill exemption
makes clear, however, this is not the case. (see 54 FR 36592, September
1, 1989).
Nonetheless, while the Agency has used volume to make certain
Bevill determinations, it has not in the past used the high volume
criterion to make uniquely associated determinations. The Agency
assessed the impact of applying a high volume criteria in making
uniquely associated determinations and found that such an application
would make virtually all such wastes non-uniquely associated and
subject to Subtitle C controls, regardless of the extent to which the
waste was, in fact, associated with mining and mineral processing. EPA
does not believe that it would be appropriate to ignore altogether the
extent to which a particular waste is associated with mining and
mineral processing activities that are subject to the Bevill exclusion,
since that exclusion on its face applies to wastes from those
processes. In addition, the Agency believes that a certain degree of
flexibility is needed for making uniquely associated determinations due
to the complex and varied mineral operations and site-specific factors
that must be considered in making these decisions. In today's rule, the
Agency is, therefore, not adopting the use of a volume criterion to
determine whether a waste is uniquely associated.
The Agency also proposed an option where a waste would be uniquely
associated if it came into direct contact with an ore or mineral or
wastes from the extraction, beneficiation, or processing of ores and
minerals. Several commenters expressed the view that, while contact can
be one useful indicator of whether a waste is uniquely associated with
mining, such contact should not be required in all cases. These
commenters believed that the test should be whether the conduct of
mining and mineral processing necessitates the generation of a
particular waste; if so, then the waste should be considered uniquely
associated. Other commenters believed that the ``contact'' principle
was potentially overly broad, since it would have the potential to
sweep into Bevill wastes that typically would not be considered
uniquely associated. As proposed, however, the contact option would
consider only contact that occurred as part of a processing operation.
After consideration of public comments, the Agency has concluded
that a strict application of the ``contact'' principle, while appealing
because of its simplicity, would not provide the best means of
determining whether a waste is uniquely associated with mining or
mineral processing. The Agency is concerned that, while contact may be
one indicator of when a waste is associated with the mineral recovery
process where, for example, the contact with the process imparts
chemical characteristics to the waste, EPA agrees with commenters that
simple application of the contact principle has the potential to be
over-inclusive of wastes that are properly viewed as ``uniquely
associated.'' The Agency has not, therefore, adopted that criterion as
being determinative of whether a waste is uniquely associated.
The other option in the May 1997 proposal would modify the contact
principle to exclude, as non-uniquely associated, wastes that only
exhibit the same hazardous characteristic both before and after contact
with the Bevill waste, feedstock, or product. This ``modified contact''
approach may reduce the potential for Bevill wastes to be dumping
grounds for non-Bevill hazardous wastes. Under this approach, wastes
that are inherently hazardous prior to contact with a Bevill waste, and
which retain the same hazardous characteristic after contact, would be
subject to Subtitle C regulation when discarded.
Commenters pointed out that the Agency had never before proposed to
use the hazardous characteristic to determine whether a waste was
uniquely associated, nor had the Agency used this criterion in making
uniquely associated determinations since 1980. They also pointed out
that the Agency had already studied the hazardous characteristics of
uniquely associated wastes but nevertheless stated that these wastes
should not be subject to RCRA Subtitle C (51 FR 24496).
Some commenters also contended that the real issue is whether the
waste is indigenous to the mining and mineral recovery process--i.e.,
whether it is necessary to generate the waste in order to conduct the
process--and that the hazardousness of a material prior to its use in
the process is, therefore, irrelevant.
EPA agrees, in part, with these commenters that the characteristics
of a material (i.e., whether it is hazardous) prior to use in mineral
recovery processes should not be solely determinative of whether the
wastes are ``uniquely associated.'' As a general matter, the closer the
nexus between a particular waste and the mineral recovery process, the
more likely it is ``uniquely associated'' within the meaning of Bevill.
The Agency recognizes, however, that one fact that might help evaluate
the relationship between a particular waste and the mineral recovery
process is the extent to which the properties of a particular waste can
be attributed to the process itself. Thus, while the Agency does not
believe that hazardousness of a material prior to use in the mineral
recovery process should be determinative of its Bevill status after
use, the extent to which the material has acquired attributes through
its involvement in that process is relevant.
Based on consideration of all the public comments, the Agency
believes that it is appropriate to evaluate whether a particular waste
is uniquely associated with mining and mineral processing as follows.
First, any waste from ancillary operations are not ``uniquely
associated'' because they are not properly viewed as being ``from''
mining or mineral processing. In evaluating wastes from non-ancillary
operations, one must consider the extent to which the waste originates
or derives from processes that serve to remove mineral values from the
ground, concentrate or otherwise enhance their characteristics or
remove impurities, and the extent to which the mineral recovery process
imparts its chemical characteristics to the waste. Under this test, the
greater the extent to which the
[[Page 28592]]
waste results from the mineral recovery process itself, and the more
the process imparts to the waste its chemical characteristics, the more
likely the waste is ``uniquely associated.''
The Agency believes that this approach provides a reasonable basis
to determine whether a waste is ``uniquely associated.'' The Agency
believes that these factors touch on the full range of facts that are
likely to be relevant in any particular case. As is evident from the
criteria summarized above, judgment must be exercised where the
question is whether a waste from a non-ancillary operation is uniquely
associated. EPA believes that this is appropriate because of the fact-
specific nature of this determination and the myriad circumstances that
can arise. However, as noted above, the Agency believes that wastes
generated from ancillary operations (such as truck maintenance shops at
a mine and not from the mining or mineral recovery process itself), are
not uniquely associated. Such circumstances would likely present the
most readily identifiable cases of non-uniquely associated wastes.
The approach noted above reflects the longstanding principle, based
on the clear language in Section 3001 of RCRA, that uniquely associated
wastes must result from mining and mineral processes themselves. This
approach also is generally consistent with industry's underlying
contention that the uniquely associated concept should exempt wastes
that are ``indigenous'' to mining. EPA disagrees, however, with
industry's contention that uniquely associated wastes are any wastes
that are unavoidably generated by mining operations. For example,
arguably, it is unavoidably necessary to conduct maintenance on
machinery that supports mining at a site (e.g., used to transport ores
and minerals among processes); however, such maintenance is not
necessarily part of the mining or mineral recovery process itself. EPA
believes that the proper focus should be the extent to which a waste is
generated as part of the mining and mineral recovery process, not the
extent to which a facility must conduct an activity as part of its
operation.
The elements of the ``contact'' options discussed in the preamble
to the proposal, as well as regulatory language contained in the May
1997 proposed rule (see proposed 40 CFR 261.4(b)(7) (stating that
exempt extraction and beneficiation wastes must ``originate from the
extracted ore or mineral'')) may affect uniquely associated
determinations. While, as discussed above, the Agency believes that
sole reliance on a contact principle would be unjustifiably rigid,
consideration of the extent to which the mineral recovery imparts to
the waste its chemical characteristics provides a useful means of
evaluating whether a waste is uniquely associated. The greater the
extent to which the waste acquires its chemical characteristics from
the process from the processing of an ore or mineral, the more likely
that waste would be uniquely associated with the Bevill process.
Conversely, the less a particular waste originated from or acquired its
characteristics from such processes, the less likely it is uniquely
associated.
Some commenters asserted that the Agency's proposal represented a
sharp departure from past Agency practice under the uniquely associated
principle and would constitute, in effect, a revision of prior Bevill
regulatory determinations. Neither contention is correct. While the
Agency has articulated here its approach to the uniquely associated
principle in more detail than previously, the Agency believes that the
approach is fundamentally the same as how the Agency has applied the
uniquely associated principle in the past. Second, the Agency is not,
through the uniquely associated principle, seeking to revise past
regulatory determinations that exempted extraction and beneficiation
wastes and certain mineral processing wastes from Subtitle C
regulation. The list of exempt extraction/beneficiation processes and
mineral processing wastes in section 261.4(b)(7) is not altered by this
approach. Even under these existing regulatory provisions, it was
necessary to determine in certain cases whether a particular waste
stream was, in fact, ``from'' (i.e., ``uniquely associated'' with) one
of the enumerated Bevill processes. EPA's past regulatory
determinations did not, therefore, obviate the need for determining the
applicability of Bevill to particular waste streams. In this rule, EPA
is simply ensuring that the uniquely associated criteria have the
benefit of full public notice and comment; we have not, however,
altered the scope of prior regulatory determinations through this
process.
Industry commenters nonetheless had concerns about certain
applications of the uniquely associated principle articulated in the
mineral processing identification document contained in the docket at
proposal. In particular, commenters expressed concerns that the
document concluded that spent kerosene in copper solvent extraction,
crud from electrowinning, crucibles and cupels, and acid cleaning
solutions from gold heap leaches are not uniquely associated. All of
the wastes just noted are generated as a result of beneficiation. It
should be noted that all wastes generated after the commencement of
mineral processing are mineral processing wastes. As a result of the
Agency's 1989 rule (54 FR 2322), all mineral processing wastes, except
those noted in 40 CFR 261.4(b)(7), are subject to RCRA Subtitle C, if
they exhibit a hazardous characteristic. Therefore, the effect of the
uniquely associated principle is of less import than at beneficiation
facilities.
The Agency received numerous comments challenging the Agency's
position that these wastes were not uniquely associated. Comments from
the copper industry noted that slimes/muds, crud, and spent kerosene
generated from copper solvent extraction and electrowinning were
uniquely associated because these wastes had been determined by the
Agency in 1989 (see 54 FR 36592) to be wastes from extraction and
beneficiation. Based on these comments, the Agency has reassessed its
prior conclusions regarding these wastes and agrees with the copper
industry that slimes/muds, crud, and spent kerosene generated from
copper solvent extraction and electrowinning are uniquely associated.
40 CFR 261.4 states that wastes from solvent extraction and
electrowinning are extraction/beneficiation wastes and are not subject
to regulation under Subtitle C. Applying the approach described above,
it is clear that solvent extraction and electrowinning are clearly not
ancillary activities since their sole purpose is to concentrate copper
values out of pregnant leach solution. The ``uniquely associated''
nature of these wastes is also supported by the degree to which the
wastes originate and derive from the mineral recovery process. Thus,
the Agency's view is that these wastes are ``uniquely associated'' with
beneficiation.
Comments received from the gold industry noted that acid wash
solutions are generated solely from processes used to concentrate gold
values from cyanide leach solutions. Again, the Agency has reassessed
its earlier interpretation and now believes that acid wash solutions
from gold heap leaching are uniquely associated. The Agency came to
this conclusion in light of the non-ancillary nature of the process
generating these wastes (carbon columns must be kept ``clean'' for the
gold to be effectively recovered), the extent to which the wastes
originate and derive from this mineral recovery process, as well as the
fact that the process imparts some
[[Page 28593]]
chemical characteristics to the waste (i.e., the ore material that is
cleaned from the carbon).
Based on the approach articulated above, the Agency now believes
that other wastes are best viewed as non-uniquely associated. For
example, the Agency believes that lead anodes used in the
electrowinning process are not non-uniquely associated wastes. While
lead anodes are used in the mineral recovery process and thus could be
viewed as uniquely associated based on this consideration in isolation,
a countervailing consideration is that the mineral recovery process
imparts virtually no characteristics to these materials. Lead anodes
are virtually identical both before and after being used in the
process. On balance, the Agency concludes that lead anodes are not
uniquely associated with mining and mineral processing.
The Agency also reassessed the status of cupels and crucibles and
finds that they remain non-uniquely associated wastes. These wastes are
the result of laboratory testing. Cupels and crucibles are also used in
other industries (e.g., jewelry companies test the precious metal
content of metals using cupels). These wastes are from an ancillary
operation, laboratory analyses, and are not generated due to the direct
recovery of gold and, therefore, fail to meet the Agency's uniquely
associated criteria. It should also be noted that the Agency has
consistently found that laboratory wastes are generally non-uniquely
associated.
As stated previously, the applications of the ``uniquely
associated'' principle articulated here reflect the Agency's
interpretation of the criteria as applied to those particular wastes
based on the best current information available to EPA. Like the
positions articulated in the Identification Document, these calls
represent the Agency's current best evaluation of whether these wastes
are ``uniquely associated,'' based on available information. However,
the discussion above and in the Identification Document simply provides
guidance on these issues, and therefore, the determinations are not
legally binding on decisionmakers, the public, or the courts.
Finally, one commenter argued that the uniquely associated
principle as discussed by EPA is an impermissible reading of the Act to
the extent it would authorize EPA to consider factors other than high
volume/low toxicity in making Bevill determinations. The Agency
disagrees with this position. The Court in EDF II directed the Agency
to apply a high volume/low toxicity criteria to determine if a mineral
processing waste would retain the Bevill exclusion. The uniquely
associated inquiry is somewhat different. The question here is the
threshold issue whether a particular waste is ``from'' extraction,
beneficiation or mineral processing in the first place. The Agency does
not believe that the decision in EDF II spoke to that inquiry. Rather,
EDF II was concerned solely with the circumstances under which a waste
that is ``from'' these processes qualifies for the Bevill exclusion.
Stated another way, a waste is only subject to the Bevill exclusion if
it is, in fact, ``uniquely associated'' with extraction/ beneficiation
or one of the 20 exempt mineral processing wastes. Thus, the uniquely
associated principle does not expand the scope of the Bevill exemption,
and the Agency's approach is, therefore, entirely consistent with the
decision in EDF II.
b. Addition of Mineral Processing Secondary Materials to Units
Processing Bevill Raw Materials. The question addressed in this section
is: if a Bevill extraction/beneficiation process uses as feedstock a
mineral processing secondary material which otherwise would be a
hazardous waste, would the resulting wastes still be considered to be
from extraction/beneficiation and hence Bevill exempt?
There are two bases for potential environmental concern prompting
this question. The narrower issue is that if otherwise-hazardous wastes
are used as partial feedstocks, could they change the resulting wastes'
character in a manner such that the existing exclusion should no longer
apply, or, put another way, is the Bevill exemption being used to
shield disposal of non-exempt hazardous wastes? The broader issue is
whether the Bevill amendment, which creates an exemption from rules
designed to protect the public and the environment from unsafe
hazardous waste disposal practices, should be interpreted any more
broadly than necessary given that the effect is to exempt more waste
from protective controls.
EPA proposed two different answers to these questions. In the
January 1996 proposal, the Agency proposed to apply the same
``significantly affected'' test used in the partially analogous context
of a Bevill device which co-processes hazardous waste along with normal
raw material feedstock. 61 FR at 2351 and 40 CFR section 266.112. So
long as resulting wastes from the extraction/beneficiation process were
not ``significantly affected'' by the addition of hazardous secondary
materials, resulting wastes would remain exempt. Id. Significantly
affected meant either that the resulting wastes reflecting co-
processing were statistically different over the non-waste baseline, or
that there was an environmentally significant increase in hazardous
constituents over the non-waste baseline. Id.
The May 1997 proposal would have gone further and interpreted the
Bevill amendment narrowly (a common rule of construction when
construing exceptions to plenary protective regulatory schemes to apply
only to situations when extraction/beneficiation raw material
feedstocks are utilized) to apply only to situations when extraction/
beneficiation raw material feedstocks are utilized (see 62 FR at
26052).
After reviewing the public comments, the Agency has decided not to
adopt either of these alternatives. As explained below, EPA ultimately
has decided that the likely result of either proposal would be
unwarranted disruption to legitimate (and desirable) recovery practices
within the industry. Nonetheless, as discussed in the final subsection
of this part of the preamble, the Agency retains concerns that the
Bevill amendment not be used as a means of shielding disposal of non-
Bevill hazardous wastes, and therefore cautions that the Agency intends
to scrutinize especially carefully claims of legitimate recycling when
hazardous secondary materials are co-processed in extraction/
beneficiation operations.
(i) Should the Bevill amendment apply only when virgin materials
are processed in extraction/beneficiation operations? In the Agency's
May 1997 proposal, EPA sought comment on whether a narrow reading of
the Bevill exclusion should be implemented which would limit the
availability of the Bevill exemption to wastes generated exclusively
from the use of Bevill raw materials, namely ores and minerals. Under
this approach only virgin ores used as a feedstock to a beneficiation
operation and only concentrates derived from beneficiation and then
used as a feedstock to mineral processing would be eligible for the
Bevill exclusion. If any alternative materials were used as feedstocks,
the resulting waste would not be eligible for the Bevill exclusion. 62
FR at 26052.
In today's rule, the Agency is declining to pursue this option.
Industry comments were uniformly opposed. Industry noted that since
1989, the Agency has established a clear use of the 50 percent rule and
was well aware that the co-processing of a range of materials was
occurring at both extraction/beneficiation and mineral processing
facilities when it finalized its
[[Page 28594]]
1989 rulemaking (see 54 FR 33620, September 1, 1989). Industry further
pointed out that in the 1989 rulemaking the Agency found that 20
mineral processing wastes (see 40 CFR 261.4(b)(7)) would retain their
Bevill exempt status even though co-processing was occurring. Industry
also noted that the Agency had not presented any data to confirm that
the co-processing of virgin and non-virgin materials would actually
increase risks to the environment. Public interest groups on the other
hand indicated that the proposed option more closely follows the intent
of Congress to limit the Bevill exemption to high volume, low toxicity
wastes.
The Agency has reviewed the data on co-processing of non-virgin and
virgin material and finds that it did evaluate co-processing issues in
its 1990 Report to Congress on Wastes from Mineral Processing (EPA
Office of Solid Waste, July 31, 1990). This review, as it relates to
the 20 mineral processing waste streams that are still exempt, found
that co-processing had not significantly changed the hazardous
properties of the resultant wastes.
The Agency noted in its proposal that it was unaware of the extent
of co-processing at extraction/beneficiation facilities, particularly
after 1985. Industry comments noted that background reports to the
Agency's 1985 ``Report to Congress on Extraction and Beneficiation
Wastes'' (EPA Office of Solid Waste, December 31, 1985) discussed this
co-processing issue. Agency review of these documents indicates that
while some references to feedstocks are discussed, the Agency was not
aware of the extent of this practice until it began to restudy mining
and mineral waste management practices in 1989 and initiated a series
of visits to mines and mineral processing facilities in 1991-92.
Industry also submitted comments indicating that implementing this
option would have significant adverse impacts on the mining and mineral
processing industries. The Agency assessed industry comments and
conducted its own economic analysis. The Agency found that
implementation of this option may reduce current recycling in the
copper and lead sectors, and could cause potentially serious economic
disruption to industry. (See EPA's Regulatory Risk Impact Analyses.)
Both the gold and copper sectors pointed out that they routinely
reintroduce mineral-bearing streams from their processing activities
into their beneficiation plants to further recover metal values. Such
practices would diminish if this option were implemented, since
affected extraction/beneficiation operations would not recycle
secondary materials if the result is to lose Bevill status of the
resulting wastes. It makes little sense for the Agency to implement a
program which may reduce recycling where its knowledge of the
environmental benefit of the approach is limited.
(ii) Significantly Affected. Under the Agency's January 1996
proposal, mineral processing secondary materials could be introduced
into beneficiation units generating Bevill-exempt wastes (without
affecting the wastes' Bevill status) if they were legitimately
recycled, secondary materials comprised less than 50% of the total feed
to the unit, and the resulting wastes were not ``significantly
affected'' by the recycling practice.
EPA has decided to adopt the proposed approach except the Agency
has decided not to adopt the proposed ``significantly affected'' test
in today's final rule. It should be pointed out that small volumes of
mineral processing secondary materials likely to be recycled at
beneficiation facilities would be processed along with enormous
quantities of raw ore. Therefore, the probability that the introduction
of such materials would affect the characteristic of the resultant
wastes is very low.
Given the likelihood of minimal environmental effect, the Agency
must therefore judge whether the benefits of encouraging recycling
these materials outweigh the potential additive risks that, however
unlikely, could potentially occur in unusual cases. The Agency has
decided that, from both an implementation and an overall environmental
perspective, not requiring a ``significantly affected'' evaluation
makes sense. While it is possible that adoption of a ``significantly
affected'' test might catch the unusual circumstance where addition of
secondary materials substantially changes the characteristics of the
resultant wastes, imposing such a requirement could potentially have a
chilling effect on the amount of secondary material that the industry
recycles. This is because industry would not risk imperilling Bevill
status, since a consequence could be RCRA permitting and facility-wide
corrective action potentially affecting areas of historic
contamination. From an environmental perspective, EPA believes that the
benefits of recycling such materials are substantial, and far outweigh
the largely marginal benefits that could be associated with requiring a
``significantly affected'' analysis on a waste stream by waste stream
basis.
EPA originally viewed the situation presented here as analogous to
when hazardous wastes are co-processed in Bevill units, and so proposed
the identical test for resulting residues. 61 FR at 2351. On
reflection, there are important distinctions between the two fact
patterns. EPA applies the ``significantly affected'' tests when what
are admittedly hazardous wastes are co-processed. The usual case is
when a hazardous waste fuel is burned in a Bevill unit (like a cement
kiln) which also processes normal raw materials. The hazardous wastes
can contribute more and different hazardous constituents not normally
found in the raw materials. In the extraction/beneficiation example,
however, the mineral processing secondary materials are being used as
feedstock precisely because those materials share attributes found in
raw materials (i.e., recoverable amounts of metals). Because the rule
limits co-processing to mineral processing secondary materials, such
materials would typically be similar in nature to the raw materials
being processed, making it far less likely that co-processing would
significantly alter the attributes of resulting wastes. In addition,
unlike the burning in furnaces example noted above, the mineral
processing secondary materials being recycled are not hazardous wastes.
Although they are secondary materials, the Agency has decided to
exclude them from the regulatory definition of solid waste (assuming
legitimate recycling) because the activity resembles normal reclamation
practices within the industry. Put another way, since the mineral
processing secondary materials are from the same industry sector and
are being reclaimed within the same industry, they can be viewed as
secondary materials which are not wastes. It is, thus, less appropriate
to apply a significantly affected test to these non-waste feedstocks.
EPA also was unable to apply the ``significantly affected'' test in
a manner that would focus on those secondary materials that actually
could cause significantly increased environmental risks. The proposed
test was the Burning in Furnaces (BIF) 2-part test, which would
function in a different manner in this rule. Under the BIF rule, the
concern was with the use of hazardous wastes from outside industries,
and residuals rarely fail the second part of the test, exceeding the
hazardous characteristic. Here, we are dealing with materials from
within the industry, metal values are reclaimed, and wastes typically
exhibit a hazardous characteristic. Since mineral processing
[[Page 28595]]
secondary materials often contain other metals in them, the resultant
wastes from co-processing may show statistical increases or decreases
in the metals content of the resultant wastes. The increases or
decreases in metal constituents, however, does not necessarily mean
that risk has increased. An increase in one constituent may be offset
by a decrease in another constituent or by additional volumes of raw
material feedstocks that would be needed to replace the mineral
processing secondary materials. The application of the proposed test
therefore could not be effectively used to determine if risks would
increase if secondary materials are co-processed at beneficiation
facilities.
(iii) Conclusion. For these reasons, the Agency has decided to
retain as a condition for retaining Bevill status the standard
requirement that an extraction/beneficiation unit processes at least 50
percent raw material. 54 FR at 33620 (Sept. 1, 1989); 50 FR at 49190
(Nov. 25, 1985); and 56 FR at 7198 (Feb. 21, 1991) (previous instances
where EPA has used this test); 61 FR at 2351 (proposal of that test
here). If the 50 percent criterion is met, the resulting waste would
still be from extraction/beneficiation and hence exempt. Raw materials
can be mineral processing secondary materials and be placed into units
generating Bevill-exempt wastes provided that the facility legitimately
recycles these materials.
The proviso is important. EPA repeats that the Bevill amendment is
not to serve as a means of disposing of non-Bevill hazardous wastes. As
explained later in the preamble, if a hazardous waste is mixed with a
Bevill waste, the mixing is regulated under RCRA Subtitle C, and the
mixed wastes may be Subtitle C hazardous wastes. While the mixture rule
does not apply when materials are placed in a beneficiation unit for
legitimate recycling, it would apply if a hazardous secondary material
is not being recycled legitimately. See U.S. v. Self, 2 F.3d at 1071,
1079 (10th Cir. 1993)(sham recycling is simply hazardous waste disposal
or treatment).
It should also be pointed out that today's rule prohibits the
storage on the ground of any characteristically hazardous mineral
processing secondary material. Should a beneficiation facility wish to
legitimately reclaim such materials, it should be aware that placement
of these materials in raw material piles may change the RCRA status of
the pile.
c. Bevill Mixture Rule and Disposal. Disposal of waste mixtures is
the focus of this section. The Agency promulgated the Bevill mixture
rule in 1989 (see 54 FR 36592). That rule was remanded to the Agency in
Solite Corp v. EPA, 952 F.2d 473, 493-94 (D.C. Cir. 1991). EPA
reinstated the mixture rule in 1992; however, this reinstatement was
found to be procedurally defective in Mobil Oil v. EPA, 35 F. 3d 579
(D.C. Cir. 1994).
In the January 1996 proposal, the Agency proposed that if any
mineral processing hazardous waste, or indeed any hazardous waste, is
mixed with and disposed with a Bevill waste, the resulting waste is,
under certain circumstances, regulated under RCRA Subtitle C. The
Agency further stated that the mixture of Bevill wastes and hazardous
wastes would normally be regulated as a form of treatment subject to
regulation under Subtitle C. The Agency stated its concern about the
potential human health and environmental risks due to increased
hazardous constituents resulting from the disposal of mixtures of
hazardous waste with Bevill-exempt wastes. The Agency based the
proposal on the policy that Bevill wastes not be allowed to serve as an
unregulated dumping ground for hazardous wastes. Cf. Horsehead Resource
Development Co. v. Browner, 16 F. 3d at 1258.
The rule being adopted today is a reinstatement of the mixture rule
promulgated in 1989. The Agency continues to believe that the approach
adopted in 1989 is sound, and properly balances the objectives of the
Bevill amendment with those of RCRA as a whole. While commenters
criticized EPA on the grounds that the prior mixture rule has twice
been struck down by the courts, those decisions did not address the
merits of the Bevill mixture rule.
One clarification of statements in the 1996 proposal is in order.
The Agency stated that the proposed rule differed from the 1989 Bevill
mixture rule in that the earlier rule had exempted mixtures of Bevill
wastes and characteristic hazardous wastes from requirements pertaining
to treatment. See 61 Fed. Reg. 2352. This statement was, however, in
error. The Agency stated in the 1989 rulemaking that such mixing would,
in fact, constitute treatment of a hazardous waste, and would be
subject to the appropriate regulation for treatment storage and
disposal of hazardous wastes, including obtaining a permit. 54 Fed.
Reg. 36622. Thus, the Agency is not taking a more stringent approach to
regulating mixtures than was taken in 1989. As in 1989, moreover, the
Agency is not amending in any way the definition of treatment, storage,
or disposal of hazardous wastes; nor is the Agency promulgating any
specific provisions related to how those definitions apply to mineral
processing wastes. The Agency is simply stating that mixtures of Bevill
and non-Bevill wastes can, depending upon the particular facts,
constitute treatment, storage or disposal under the existing regulatory
program.
Industry commenters generally opposed the proposed mixture rule.
Several commenters argued that the proposed rule was contrary to the
Act because it undermined the protection that the Bevill amendment was
intended to provide the industry. These commenters argued that the
legislative history indicates Congress intended the Bevill amendment to
be read broadly, to incorporate waste products generated in the ``real
world,'' and that Congress recognized co-management of wastes practiced
by the industry occurred in the ``real world.'' According to these
commenters, integrated facilities conducting extraction, beneficiation
and processing operations at a single location have historically co-
managed wastes from these operations, including certain newly
identified mineral processing wastes, and the proposed rule would
effectively undermine the protections of the Bevill amendment for these
operations. One commenter contended that the mixture rule would subject
``high volume/low hazard'' waste mixtures from the mining and mineral
processing industry to Subtitle C regulation without having conducted
the special study and regulatory determination process set forth in
section 3001 of RCRA. Since such mixtures of wastes are ``high volume/
low hazard,'' these commenters argued that section 3001, as construed
by the Court in EDF v. EPA, 852 F.2d 1316 (D.C. Cir. 1988), mandates
exclusion of those wastes from regulation under Subtitle C.
After careful consideration of these comments, EPA has concluded
that they misconstrue the scope of the Bevill amendment, and that the
proposed approach to Bevill mixtures is a reasonable one. First, the
Agency disagrees with these commenters' interpretation of the Bevill
amendment as applying to not only to ``special wastes'' themselves, but
also to any other hazardous waste that may be co-managed with them.
Congress simply provided that ``solid waste from extraction,
beneficiation and processing of ores and minerals'' are not subject to
Subtitle C. RCRA Sec. 3001(b)(3)(A). Congress did not, as these
commenters suggested, apply this exclusion to such wastes ``and other
hazardous wastes that may be co-managed'' with them. Rather, Congress
endorsed EPA's conclusion that high volume/low toxicity ``special
wastes'' deserved special treatment
[[Page 28596]]
under the Act by virtue of the difficulties that would be associated
with managing these wastes under the Subtitle C program. Moreover,
EPA's decade-long effort to demarcate the line between special wastes
and non-excluded wastes was premised on the notion that the line
between them is of some significance. If any hazardous waste can come
within the scope of the Bevill amendment simply by being mixed with
Bevill waste, that line becomes blurred, potentially creating a
universe of excluded wastes far beyond that envisioned by Congress when
it enacted the Bevill amendment.
The Court in EDF II indicated that those mineral processing wastes
which did not meet the high volume/low toxicity criteria should be
fully subject to Subtitle C. The Agency, in today's rule, has taken
prudent steps to encourage the legitimate recycling of hazardous
secondary materials. If hazardous mineral processing wastes can not be
recycled and must be disposed, the Agency finds nothing in EDF II which
precludes the Agency from treating these hazardous wastes like any
other hazardous wastes. It should also be pointed out that today's rule
does not affect the disposal of extraction/beneficiation wastes as long
as there is no mixing of non-exempt hazardous wastes with them. EPA
believes that this rule is consistent with the scope of the Bevill
amendment because it maintains the Bevill exclusion for mixtures that
are hazardous due solely to any hazardous constituents of the Bevill
waste. The fact that these resulting wastes retain their Bevill status
does not mean, however, that the act of storing, treating, or disposing
of hazardous wastes with Bevill wastes should be exempted from normal
Subtitle C controls.
EPA also disagrees with the notion advanced by some commenters that
EPA is required by section 3001 to conduct a study to determine whether
mixtures of Bevill and other wastes meet the high volume/low toxicity
test and thereby merit being covered by the Bevill amendment. EPA reads
section 3001 as mandating that EPA study wastes generated by the mining
and mineral processing industry for purposes of determining whether
particular waste streams are subject to the Bevill amendment. EPA has
done so and determined that mineral processing wastes that do not meet
the high volume/low toxicity threshold are not subject to Bevill. EPA's
orderly decision-making (see 54 FR 36592 and 55 FR 2322), would be
undermined if the Agency were then required to revisit these
determinations based upon how facilities happen to manage their wastes.
Stated another way, EPA reasonably based its Bevill regulatory
determinations on the volumes of each type of mineral processing waste
generated within the industry; the Agency does not believe it is
reasonable to interpret section 3001 as mandating that EPA disregard
the volumes in which wastes are generated and instead base its
determinations on the vagaries of how those waste streams may be
aggregated through industry's disposal practices. Such a result would
be counter to EPA's special waste concept, and ignore the fact that
mineral processing wastes streams that are not generated above Bevill's
high volume/low toxicity threshold would, in fact, be amenable to
management under Subtitle C. Thus, the commenter's interpretation would
effectively allow the mining and mineral processing industry to
``bootstrap'' smaller volume wastes into Bevill simply by co-disposing
them with Bevill wastes. The Agency and the courts have never
interpreted Bevill in such an awkward fashion, and the Agency declines
to follow such an approach here.
The Agency does not agree with comments that any change to the
Bevill mixture rule would effectively eliminate Bevill for integrated
facilities. Today's rule does not change the Bevill status of
extraction/beneficiation wastes nor does it alter the Bevill status of
20 mineral processing wastes (see 40 CFR 261.4). Since a large number
of ``newly identified'' mineral processing waste streams become subject
to the LDR, the Agency took steps to clarify the status of non-exempt
``Bevill'' wastes (i.e. mineral processing wastes not within the scope
of the Bevill amendment) in this rulemaking. The Identification report,
placed in the docket in January 1996, was developed by the Agency to
assist companies in determining if wastes were or were not exempt. The
Agency sought comment on the draft Identification document and has
finalized this report. This report is, however, guidance. Mineral
processing companies now have the ability to identify the status of
each waste stream and to cease mixing non-exempt hazardous wastes with
exempt waste streams.
Regarding commenters' critique of the concerns expressed by EPA in
the proposal justifying the proposed mixture rule, the Agency continues
to be concerned about the mixture of hazardous wastes with Bevill
exempt wastes for treatment, storage or disposal. The Agency has noted
earlier that it is not imposing the significantly affected option
because the mixture of hazardous secondary materials with feedstocks
does not appear to adversely affect risk. This is so because the
mixtures are destined for legitimate recovery of metal, acid, water or
cyanide, or other values. Mixtures destined for disposal will not have
any of their hazardous constituents removed or other values utilized
and may contribute to the waste disposal problem. Nor is there the
slightest indication in law that normal Subtitle C rules should not
apply to disposal of normal Subtitle C hazardous wastes.
Commenters did point out several errors made by EPA in the proposed
rule language. Many commenters noted that there was an inconsistency
between the preamble of the January proposal and its proposed
regulatory language. The proposed regulatory language inadvertently
omitted language in the general mixture rule stating that mixture of a
solid waste with a hazardous wasted listed solely because it exhibits a
characteristic identified in Part 261 subpart C is a hazardous waste
``unless the resultant mixture no longer exhibits any characteristic of
hazardous waste. . . `` 40 C.F.R. 261.3(a)(2)(iii). It was not EPA's
intent to propose deleting this language, and it therefore is included
in the final rule.
In addition, as pointed out by commenters, the proposed language
failed to track the preamble discussion of mixtures of Bevill wastes
and characteristic hazardous wastes (as well as wastes that are listed
because they exhibit a hazardous characteristic). Under the proposed
rule language, mixtures of Bevill wastes and hazardous wastes would be
a hazardous waste whenever it exhibited a hazardous waste
characteristic, even where that characteristic was imparted to it
solely from the Bevill waste. (See proposed section 261.3(i).) As shown
by the preamble, this was clearly not EPA's intent, which was to
preserve the Bevill exclusion for mixtures that are hazardous solely
because of the Bevill component of the mixture. See 61 FR 2352-53.
Conversely, the preamble, although ambiguous in spots on this
issue, did say at one point that mixtures of characteristic hazardous
waste and Bevill wastes would be considered hazardous waste only if the
mixture continued to be hazardous due to characteristics imparted to it
by the non-Bevill waste. 61 FR at 2352. If the mixture exhibited a
hazardous characteristic due solely to the Bevill waste, the Agency did
not intend to designate the mixture as a hazardous waste.
[[Page 28597]]
Consistent with that discussion, under today's rule, the Agency has
decided that if Subtitle C hazardous waste exhibiting a characteristic
is mixed with Bevill-exempt waste exhibiting the same characteristic
and the mixture continues to exhibit that common characteristic, then
the entire mixture should be considered to be non-exempt hazardous
waste. This result is consistent with normal rules on when wastes are
hazardous, which state that if a waste exhibits a hazardous waste
characteristic, it remains a hazardous waste unless and until it no
longer exhibits a characteristic. 40 CFR 261.3(d)(1). In addition, such
a principle will make this rule easier to administer (should this
situation actually occur), since enforcement officials will not have to
parse out which portion of the waste mixture is imparting the
characteristic property. Finally, the result is consistent with the
overall object of today's rule: not to let Bevill wastes be used as a
means of allowing unregulated management of normal Subtitle C hazardous
wastes.
Several commenters noted concern that existing exemptions to the
Agency's mixture rule, such as that given to totally enclosed treatment
facilities and elementary neutralization units, would be eliminated
under this rule. The Agency reiterates that this rule does not alter in
any way the current Agency mixture rule. The purpose of this rulemaking
is to place the mixing of hazardous wastes that may occur at mineral
processing plants on the same status as all other hazardous waste
management.
(i) Illustrations of how today's rule operates. Although the
regulatory parlance for today's rule has always been the ``Bevill
mixture rule'', the greatest practical consequence of the rule is
probably on the units where mixing occurs. This is because units (i.e.
tanks, impoundments, piles, landfills, etc.) where hazardous wastes are
placed will (absent some exemption or exclusion other than that
provided by the Bevill amendment) be regulated units, i.e. units
subject to Subtitle C standards for treatment, storage, and/or
disposal. This point is illustrated by the following examples, which
also illustrate the effect of the rule on the resulting mixtures:
Example 1. Facility A generates F 001 listed spent solvents
which it mixes with a solid waste that has Bevill exempt-status. The
mixing occurs in a landfill.
The landfill is a regulated unit because hazardous waste--F
001--is being disposed in it. (Among other things, this means that
the F 001 wastes could not be placed in the landfill until the LDR
treatment standard is satisfied.) In addition, all of the wastes
with which the F 001 wastes are mixed are hazardous wastes carrying
the F 001 waste code by application of the mixture rule.
Example 1a. Same facts as in example 1, except that the waste
being mixed is F 003 spent solvent, a waste listed only because it
exhibits a characteristic of hazardous waste.
The landfill becomes a regulated unit for the same reason as in
example 1. (See Chemical Waste Management v. EPA, 976 F.2d at 20 n.4
and 24 n. 10 (placement of waste which is hazardous for any amount
of time in a unit subject that unit to Subtitle C regulation); 61 FR
at 2352 (same). However, the status of the resulting waste mixture
is determined by the principles for characteristic hazardous wastes,
illustrated below.
Example 2. Facility B generates a characteristic ignitable
solvent which it adds to a surface impoundment containing a Bevill-
exempt waste that would exhibit the TC for lead. The resulting
mixture exhibits TC for lead but is no longer ignitable.
The surface impoundment is a regulated unit, since it is engaged
in treatment (elimination of the ignitability characteristic) and
disposal (the placement of the ignitable waste). The remaining
wastes in the unit retain their Bevill-exempt status because they do
not exhibit the characteristic property of the non-Bevill hazardous
waste. Thus, if the waste were to be removed from the impoundment
and disposed elsewhere, disposal need not occur in a regulated unit.
Example 3. Facility C generates a characteristic hazardous waste
exhibiting TC for lead which it mixes in a tank with Bevill-exempt
wastes which also would exhibit the TC for lead. The resulting
mixture continues to be TC for lead.
The tank is engaged at least in storage of hazardous waste, and
possibly treatment (depending on how the D008 hazardous waste is
affected by the mixing). If waste is removed from the tank, it
remains subject to Subtitle C because it continues to exhibit the
characteristic of the non-exempt hazardous waste.
d. Remining. The Agency clarified in its January 1996 proposal that
the removal of historically land placed mineral processing wastes for
the purposes of mineral recovery would not constitute disposal for
purposes of triggering Subtitle C. Moreover, removal of wastes would
not render the historic disposal unit subject to RCRA hazardous waste
requirements (see 53 FR at 51444, December 21, 1988). The Agency is
today again clarifying that removal of waste from a unit does not
constitute disposal for the purposes of triggering Subtitle C
regulation.
Commenters noted that the proposed mixture rule would in effect
eliminate opportunities for remining. The Agency disagrees. As noted
previously, the mixture restrictions in today's rule deals primarily
with disposal of mixtures. The mixture rule therefore, will not affect
the co-processing of historically disposed mineral processing secondary
materials with other feedstocks.
6. Responses to Court Remands
a. Applicability of the Toxicity Characteristic Leaching Procedure
(TCLP) to Mineral Processing Wastes. In the January 1996 proposal, the
Agency proposed to continue using the TCLP (SW-846 Test Method 1311) as
the basis for determining whether mineral processing wastes and
manufactured gas plant wastes exhibit the toxicity characteristic (TC)
of hazardous wastes, and developed a record supporting this position.
When the Agency promulgated the TCLP method for testing whether wastes
exhibit the toxicity characteristic, the applicability of the TCLP test
to mineral processing wastes was challenged in Edison Electric
Institute v. EPA, 2 F.3d 438 (D.C. Cir. 1993) (``Edison''). The Court
held that the information in the record at the time was insufficient to
show a rational relationship between the TCLP and a likely
mismanagement scenario for mineral processing wastes.
Under the Court's holding, the Agency must at least provide some
factual support that such a mismanagement scenario is plausible (2 F.3d
at 446-47). The Agency is addressing this remand in today's final rule
because any applicable land disposal restrictions would have little
meaning unless the Agency has a basis for determining whether these
mineral processing wastes are hazardous, and, therefore, subject to the
restrictions.
Under the Court's ruling in Edison, the application of the TCLP
test to mineral processing wastes is appropriate if the evidence
available to EPA shows that disposal of such wastes in municipal solid
waste landfills (MSWLF) is a ``plausible'' mismanagement scenario (not
necessarily requiring that it be typical or common) 2 F.3d at 446.
Moreover, it is sufficient if there is ``evidence or explanation on the
record to justify a conclusion that mineral wastes ever come into
contact with any form of acidic leaching medium.'' Id. at 447.
In considering the plausibility of this mismanagement scenario, the
Agency has first carefully evaluated those circumstances that industry
has argued make such mismanagement implausible. Industry has argued
that co-disposal with municipal solid waste is not plausible because
the huge volumes in which the wastes are generated could simply not be
handled by an MSWLF. EPA has, however, conducted a comprehensive review
of such wastes and concluded that many wastestreams are generated at
low volumes. (See
[[Page 28598]]
Characterization of Mining and Mineral Processing Wastestreams, USEPA,
1998.) Thus, the volumes in which mineral processing wastes are
generated do not render disposal in an MSWLF implausible.
Industry comments also indicated that the location of its
facilities were remote and not close to municipal landfills. Based on
physical location alone, industry suggested that disposal of their
wastes in municipal landfills was very unlikely. This contention is
not, however, supported by the facts. The Agency evaluated the location
of mineral processing facilities and found that a considerable number
of them are located east of the Mississippi River and some are located
in or near urban areas. (see Population Studies of Mines and Mineral
Processing Sites, 1998, U.S. EPA.) This report indicates that there is
factual information which rebuts the industry's position that the
location of mineral processing facilities is routinely so remote so as
to make co-disposal with municipal solid waste implausible. Thus, based
on the Agency's population study noted above, the Agency concludes that
some mineral processing facilities are in fact located in or near urban
areas and their location in such urban areas means that it is plausible
that their wastes could be disposed of in urban landfills.
Factual information collected by the Agency (made available for
public comment) supports the conclusion that mineral processing wastes
may plausibly be disposed of with municipal solid wastes. Industry
comments contested EPA's factual basis for the landfill disposal cases
found in Applicability of the Toxicity Characteristic Leaching
Procedure to Mineral Processing Waste, U.S. EPA, 1998. Industry
commenters contended that the cases presented by the Agency do not
reflect current waste management practices (which primarily involve on-
site disposal). Industry commenters also argued that the facts of
particular cases did not, in fact, support the conclusion that co-
disposal had occurred. EPA has reviewed the information and concluded
some of these comments had merit, and EPA has deleted from the final
document those cases for which there was not sufficient information to
be relied upon by the Agency. However, even after a careful sifting of
the case studies, there continues to be evidence to support the
conclusion that co-disposal of mineral processing wastes with municipal
solid waste is plausible. While most mineral processing wastes are
generated in large volumes and disposed on-site as industry contends,
the Agency has found that some mineral processing wastes are placed in
dumpsters, or similar containers, and shipped off-site for commercial
disposal.
These cases include, but are not limited to, co-disposal of mineral
processing wastes from the refining of alumina, copper, gold, ferrous
metals, lead, silver, and zinc. Such wastes have been disposed in
MSWLFs in various states throughout the United States. The Agency also
found several cases where manufactured gas plant wastes were disposed
in MSWLFs. (See Applicability of the Toxicity Characteristic Leaching
Procedure to Mineral Processing Waste, U.S. EPA, 1998.)
EPA acknowledges that the information obtained by the Agency does
not show that the mismanagement scenario is either typical or common,
but such a level of proof is not required. Edison, 2 F.3d at 446. It
is, moreover, not surprising that the practice does not appear to be
widespread because, since 1989, disposal of any non-Bevill hazardous
mineral processing wastes in a municipal solid waste landfill has been
illegal. Nonetheless, since some mineral processing facilities are
located near urban areas and generate low volume wastes, and some of
these facilities appear to have, in fact, co-disposed of these wastes
in this manner, EPA believes it is reasonable to conclude that
application of its mismanagement scenario to mineral processing wastes
is reasonable; that is, if these wastes were no longer identified as
hazardous by means of the TCLP, then the type of improper disposal
which occurred in the past could resume.
Industry commenters further contend that an alternative test, the
Synthetic Precipitation Leaching Procedure (SPLP), is more appropriate
for mineral processing wastes. The National Mining Association (NMA)
noted in its comments that the leach solution used in the SPLP test
protocol would more accurately reflect the environmental exposure of
mineral processing wastes. The SPLP test uses a leach solution which
mimics acid rain, while the TCLP uses a leach solution which mimics
acids formed in municipal landfills. The TCLP test therefore uses a
leach solution which is more acidic that the SPLP test. However,
``[n]othing in [RCRA] requires EPA to tailor the TCLP to the conditions
to which mineral wastes are typically exposed.'' Edison, 2 F.3d at 443.
If that were the case, it would not have been appropriate for EPA to
even have adopted a generic mismanagement scenario as the basis for
establishing its approach for testing for the hazardous characteristic.
This approach has, however, been upheld as a reasonable exercise of the
Agency's discretion. Id.
Industry commenters supplied data indicating that the TCLP is more
aggressive than the SPLP for most metals and especially lead. Certain
states supported use of the test under all or limited circumstances.
EPA received very limited data comparing the leach tests. Because these
data were extremely limited, the Agency still does not have data
broadly comparing TCLP results to SPLP results for a range of mineral
processing waste streams. Industry-supplied data appear to indicate
that the SPLP test generates results which show lower levels of lead
than comparable results using the TCLP. Thus, due to the limited amount
of data, the Agency is unable to determine if the SPLP would routinely
show lower levels of lead, or how the two tests compare when analyzing
other metals or whether such lower levels would, in fact, better
reflect actual field conditions than would the TCLP. At bottom, the
fundamental issue is not whether one test is more conservative than the
other. Rather, the issue is whether it is plausible that mineral
processing wastes may be disposed of in environments reflected by the
conditions mimicked in the TCLP.
Aside from the plausibility of the Agency's mismanagement scenario,
application of the TCLP to mineral processing wastes is supported by
comments from industry submitted during the rulemaking regarding
disposal practices that are taking place or advantageous at integrated
mineral processing/beneficiation facilities in the industry. The
proposed (and now final) rule regarding mixtures of Bevill wastes with
non-Bevill hazardous wastes (including mineral processing hazardous
wastes) effectively prohibits such mixing. Some commenters opposed the
proposed mixture rule on the grounds that integrated facilities
typically co-dispose of hazardous mineral processing wastes (including
those exhibiting the TC) with extraction and beneficiation wastes, and
desired to continue this practice or to have mixing available as a
management option for these mineral processing hazardous wastes. It is
well-documented that extraction and beneficiation wastes can often
generate highly acidic environments. (See Acid Rock Drainage
Prediction, U.S. EPA, 1994) Disposal of mineral processing wastes with
such wastes means that the mineral processing wastes would be subject
to acidic conditions that, in some cases, may be comparable to the
acidic leacheate medium utilized in the TCLP (if not somewhat more
aggressive). This
[[Page 28599]]
is because water contacting the acidic waste would thereupon become
acidic itself (an example being acid mine drainage). EPA's concern is
that if the mineral processing wastes are no longer identified as
hazardous because a test other than the TCLP is used, then these wastes
could be disposed with the acidic extraction/beneficiation wastes and
be exposed to metal-mobilizing acidic leaching conditions as water
percolates through the mixture. Given the evident economies noted in
the public comments in disposing of mineral processing wastes along
with extraction/beneficiation wastes, such a scenario is at least
plausible. Such a disposal scenario, which industry states is not only
plausible, but is typical of some facilities, provides an additional
justification for the application of the acidic leachate approach
reflected in the TCLP.
EPA recognizes that the TCLP utilizes organic acids, while the
disposal scenario discussed above would involve exposure to mineral
acids. In part because of this difference, EPA utilized the SPLP in
screening low hazard wastes as part of its 1989 Bevill determination.
See 54 FR 36592 (Sept 1, 1989). Commenters have pointed to this
statement as undercutting any application of TCLP to mineral processing
wastes.
EPA made clear in 1989, however, that the TCLP was still the
appropriate test for determining whether a particular mineral
processing waste is a hazardous waste subject to Subtitle C. Morever,
EPA believes that the general statement contained in the 1989 preamble
arguably swept too broadly in its conclusions. Notwithstanding that
statement, standard chemistry texts establish that certain metals are
highly soluble in acidic environments, including inorganic acids.
Numerous factors can affect the precise solubility of a particular
metal, and it is generally not possible to generalize whether organic
or inorganic acids would cause more or less of a particular metal
compound to solubilize. Based on generally accepted chemistry
principles, however, a highly acidic environment, whether organic or
mineral in nature, can be aggressive towards certain metals typically
found in mineral processing wastes. Given that acidic leaching media
can result when mineral processing wastes are co-disposed with
extraction/beneficiation wastes, EPA believes that the acidic leachate
procedure utilized in the TCLP can be appropriate for characterizing
mineral processing wastes.
EPA also notes a further policy justification in its choice of the
TCLP. The final rule seeks to encourage properly conducted recycling of
mineral processing secondary materials, and the scheme in the final
rule (whereby recovery can occur provided facilities do not utilize
land-based storage units) can be implemented at reasonable cost. (See
the Regulatory Impact Analysis for the final rule, summarized later in
this preamble.) However, the Agency is concerned that if integrated
facilities have a lower cost option of simply disposing these mineral
processing secondary materials with extraction/beneficiation wastes,
facilities will choose this alternative. Thus, not only will the
mineral processing wastes be potentially exposed to acidic leaching
conditions, but properly conducted metal recovery will be foregone.
(See RCRA section 1003 (a) (6) noting the statutory goal to encourage
properly conducted recycling of hazardous wastes.)
In addition to questioning the choice of a leaching medium,
commenters questioned certain other features of the test, notably a
particle size feature which mirrors freeze/thaw cycles, and a dilution/
attenuation factor which is premised on human receptors potentially
living relatively proximate to the disposal site. These issues are
addressed in greater detail in responses to comments and technical
background documents. However, the Agency has documented in the record
that many mineral processing facilities are located in parts of the
country where freeze/thaw cycles which reduce particle size occur, and
are also located near populations reflecting the degree of dilution and
attenuation used in the model. (See Population Studies of Mines and
Mineral Processing Sites, 1998, U.S. EPA)
Finally, EPA notes that nothing in the recent decision Columbia
Falls Aluminum Co. v. EPA (no. 96-1234) (April 3, 1998) is contrary to
this determination. Columbia Falls does not stand for the proposition
that EPA must customize a test for particular wastes to reflect
individual or even typical disposal circumstances, a proposition
expressly rejected in Edison, 2 F. 3d at 445. Rather, Columbia Falls
approvingly cites Edison for the proposition that ``the TCLP must bear
some rational relationship to mineral wastes in order for the Agency to
justify the application of the toxicity test to those wastes.' ''
Columbia Falls, slip op. at 18; see also Huls America Inc. v. Browner,
83 F. 3d 445, 454 (Edison involved an instance ``where the record was
barren of any rational relationship between the methodology used by the
EPA to set regulatory levels and the known behavior of the substance to
which this methodology was applied''). EPA has rectified the record
deficiencies noted in Edison, showing how the TCLP ``bears a rational
relationship to the reality it purports to represent.'' Columbia Falls,
slip op. at 18. Today's action is thus consistent with both Edison and
Columbia Falls.
EPA is making the decision to retain the TCLP as the test for
identifying mineral processing wastes effective within 90 days, co-
extensive with the LDR prohibition effective date. This effective date
can be complied with feasibly within 90 days since the TCLP is already
the applicable test for mineral processing wastes (since it was
remanded, not vacated, by the Edison ruling). Thus, the regulated
community does not need six months to come into compliance. See RCRA
section 3010(b)(1).
b. Remanded Mineral Processing Wastes. In the January 1996
proposal, the Agency proposed to revoke the current hazardous waste
listings for five court-remanded smelting wastes. The Agency also
proposed not to re-list them as hazardous stating that these wastes
would be regulated as hazardous wastes if they exhibit a characteristic
of a hazardous waste.
In 1980, the Agency listed as hazardous eight wastes generated by
primary metal smelters (45 FR 33066, 33124, 47832-34, (1980)). The
Agency listed the wastes pursuant to 40 CFR 261.11(a)(3) because they
contained one or more of the hazardous constituents listed in 40 CFR
261, Appendix VIII. The eight wastes are described as follows:
K064--Acid plant blowdown slurry/sludge resulting from the
thickening of blowdown slurry from primary copper production.
K065--Surface impoundment solids contained in and dredged from
surface impoundments at primary lead smelting facilities.
K066--Sludge from treatment of process wastewater and/or acid plant
blowdown from primary zinc production.
K067--Electrolytic anode slimes/sludges from primary zinc
production.
K068--Cadmium plant leach residue (from oxide) from primary zinc
production.
K088--Spent potliners from primary aluminum reduction.
K090--Emission control dust or sludge from ferrochromium-silicon
production.
K091--Emission control dust or sludge from ferrochromium production.
In October of 1980, in response to Congressional enactment of the
Bevill Exclusion, the Agency suspended its listing of the eight wastes
(46 FR 4614-15, 27473 October, 1980). In 1985, EPA proposed a new rule
that would relist
[[Page 28600]]
six of the eight wastes (50 FR 40292, 40295, October 2, 1985). (The
Agency chose not to propose to re-list two of the original eight waste
streams (electrolytic anode slimes/sludges, K067, and cadmium plant
leach residue, K068, from primary zinc production) because it found
that industry was routinely recycling these secondary materials in an
environmentally sound manner.) However, the Agency withdrew its 1985
proposal on October 9, 1986 (51 FR 36233).
In Environmental Defense Fund v. EPA, 852 F.2d 1316 (D.C. Cir.
1988) EPA was ordered to make a final decision regarding whether to re-
list the six metal smelting wastes that it had proposed to list in
1985, and to reduce the scope of the Bevill exemption as it applies to
mineral processing wastes. The Agency complied with this order when it
re-listed the six wastes.
The American Mining Congress (AMC) challenged these listings. In
American Mining Congress v. EPA, 907 F.2d 1179 (D.C. Cir., 1990) the
Court upheld the Agency's decision to re-list waste K088, spent
potliners from primary aluminum reduction, but found that the Agency's
record for the five remaining waste streams did not adequately address
certain issues raised in comments during the rulemaking. Since the
Court did not vacate the listings, they technically remain in effect.
In today's rule, the Agency is revoking the five remanded waste
listings. The Agency has found that several of these wastes are still
generated and in some cases land disposed, but there is a lack of
information demonstrating threats to human health or the environment
that would justify a listing at this time. The Agency believe that some
wastes, specifically copper acid plant blowdown (K064) and surface
impoundment solids at primary lead smelters (K065), are inherently
hazardous due to the presence of arsenic and lead, respectively. These
wastes can be effectively regulated under RCRA Subtitle C if they
exhibit a hazardous characteristic.
The Agency received no comments opposing the proposed rule. To
summarize, the Agency is revoking the listing for, and is not re-
listing: copper acid plant blowdown (K064); surface impoundment solids
at primary lead smelters (K065); acid plant blowdown from primary zinc
production (K066); emission control dust and sludge from ferrochromium-
silicon production (K090); and emission control dust or sludge from
ferrochromium production (K091). However, as explained previously,
should these wastes exhibit a characteristic of a hazardous waste, they
will be subject to hazardous waste regulations, including the hazardous
waste mixture rule.
c. Lightweight Aggregate Mineral Processing Wastes. In the January
1996 proposal, the Agency proposed that air pollution control dust and
sludge from the production of lightweight aggregate be classified as a
mineral processing waste that is no longer eligible for the Bevill
exemption. Lightweight aggregate air pollution control (APC) dust and
sludge were among the many mineral processing wastes made conditionally
exempt from RCRA Subtitle C requirements under the 1980 Bevill
Amendment to RCRA. In 1990, following more detailed study of the
generation rates for this waste, the Agency determined that it did not
qualify for the Bevill exemption (55 FR 2322, 2340, January 23, 1990).
In 1991, the D.C. Circuit directed the Agency to reconsider, after
providing notice and soliciting comments, whether these wastes qualify
for the Bevill exemption. (Solite Corporation v. EPA, 952 F.2d at 500
(D.C. Cir. 1991)).
In the January 1996 proposal, the Agency stated that the wastes
from lightweight aggregate production do not meet the high volume
criterion for excluded mineral processing wastes. For purposes of EPA's
1989 and 1990 rules concerning Bevill eligibility for mineral
processing wastes, high volume is defined as greater than 45,000 metric
tons per year per facility, for a solid waste, or 1,000,000 metric tons
per year per facility, for a liquid waste, averaged across all
facilities generating a particular waste.
To determine whether APC dust and sludge from lightweight aggregate
production satisfied the high volume criterion, the Agency analyzed
data from its 1989 National Survey of Solid Wastes from Mineral
Processing Facilities (SWMPF Survey) and data from public comments
submitted by affected companies. The Agency finds that the lightweight
aggregate wastes do not meet the high volume criterion.
None of the methods used resulted in a volume estimate that is
greater than 45,000 metric tons per year per facility, the high volume
criterion for mineral processing wastes. SWMPF survey data, which
includes Confidential Business Information (CBI) from two facilities
have been included in a separate analysis. The results, which remain
confidential, are not substantially different from the results
presented previously.
Solite acknowledged in comments that data do not support a
determination that lightweight aggregate air pollution control (APC)
dust and sludge is generated in volumes that meet the high volume
cutoff. However, Solite requested that the Agency delay making a final
determination on the Bevill status of its wastes due to other Agency
rulemaking activities dealing with cement kiln dusts, which Solite
contends would be addressing similar issues to those posed by
lightweight aggregate air pollution control (APC) dust and sludge.
The Agency is aware that both cement kiln and aggregate kilns may
both burn hazardous wastes fuels and that the dusts from air pollution
control devices are often blended into final products. Under existing
regulations, if these dusts resulting from burning listed hazardous
waste fuels are blended into products that are used on the land, the
product would be subject to RCRA's ``derived from'' rules which would
render the product a hazardous waste. Since both cement and light
weight aggregate products are usually placed on the land, the potential
impacts on their use could be significant. The Agency noted in its 1993
Report to Congress on Cement Kiln Dust (CKD) that it did not have
evidence that CKD was materially different when generated from kilns
burning hazardous wastes as fuel and those which did not. The Agency
does not have similar comparable analysis of light weight aggregate
dusts and sludges, and can not at this point in time conclude that
there is no difference between dusts and sludges from units burning
hazardous waste fuels and those that do not. The Agency wants to
encourage the sound recycling of these dusts and requires additional
time to assess how to ensure that aggregate and cement kiln dusts are
managed to ensure protection of human health and the environment. The
Agency is currently developing a regulatory program for the safe
management of cement kiln dusts and anticipates issuing a proposed rule
in 1998. The Agency further anticipates that it will seek comment on
how to best manage both wastes in this proposal and will seek
information it needs to make a final determination on the status of
lightweight aggregate wastes. The Agency is not finalizing its
technical background document, Lightweight Aggregate Production and Air
Pollution Control Wastes (1995), at this time.
d. Mineral Processing Wastes From the Production of Titanium
Tetrachloride. (i) Summary. In 1989, following a study of this waste's
circumstances of generation, the Agency determined that titanium
tetrachloride waste acid did not qualify for the Bevill exemption
because it was a mineral
[[Page 28601]]
processing waste, not an extraction/beneficiation waste, and did not
meet the high volume/low hazard criteria for determining eligibility
for the Bevill exemption. (See 54 FR 36592, September 1, 1989.) One
producer of titanium tetrachloride, DuPont, requested a determination
that waste from its production process be categorized as beneficiation
waste on the ground that, unlike processes used by other manufacturers,
their process included a beneficiation step which generated the wastes
at issue. However, EPA determined that DuPont's waste acids were
mineral processing wastes. DuPont challenged this decision, and the
Court remanded EPA's decision for further consideration on the grounds
that the Agency's explanation for its decision was unclear. Solite
Corporation v. EPA, 952 F.2d 473,494-95 (D.C. Cir. 1991).
DuPont submitted comments on the January 1996 proposal that contend
its processes do not destroy the structure of the mineral as it is
placed into its processes. The Agency does not accept this contention,
and, as described below, finds that the waste iron chloride acid is a
mineral processing wastes.
There are four sequential steps in DuPont's chloride-ilmenite
process, the first two of which occur within the same vessel: (1)
chlorine gas reacts with iron from the ilmenite ore to form iron
chloride gas; (2) chlorine gas reacts with titanium in the ilmenite ore
to form titanium tetrachloride gas; (3) the iron chloride is condensed
and separated to form a waste iron chloride acid; and finally (4) the
titanium tetrachloride is condensed and processed to form titanium
oxide pigment, the saleable product. The issue remanded in Solite is
whether the iron chloride acid waste, which is produced in gaseous form
at step (1) but removed from the vessel as a liquid at step (3), is a
mineral processing waste that does not qualify for the Bevill
exemption, or is a beneficiation waste covered by the Bevill exclusion
under 40 CFR 261.4(b)(7).
(ii) Proposal. In the January 1996 proposal, the Agency proposed
that iron chloride waste acid from the production of titanium
tetrachloride be classified as a mineral processing waste that is not
eligible for the Bevill exemption. In the chloride-ilmenite production
of titanium tetrachloride, the Agency found that mineral processing
began with the chlorination of the iron in the ilmenite ore and the
resulting acid is a waste from mineral processing. Specifically, the
Agency found that the acid wastes from this process are not physically
or chemically similar to the feedstocks entering the operation, which
is indicative that mineral processing has occurred.
(iii) Response to Comments. One commenter agreed with EPA's
proposed conclusion that Du Pont's process is properly classified as
mineral processing because the reaction of ilmenite ore with chlorine
gas forms new chemical compounds, namely titanium tetrachloride and
ferric or ferrous chloride. The commenter remarked that such a reaction
is a chemical processing step that fundamentally alters the make-up of
the feedstock ore. The commenter said that EPA correctly drew the
analogy between the mineral processing that occurs in the chloride-
ilmenite operation and the mineral processing that occurs in other
metallurgical operations.
One commenter noted that no beneficiation occurs in the chloride-
ilmenite process at all and that the iron chloride waste stream is not
eligible for the Bevill exemption. The commenter said that it too
produces a waste iron chloride acid in the production of titanium
tetrachloride but its waste acid is neutralized in a waste treatment
unit. The commenter provided data showing that its treatment of waste
iron chloride acid meets all proposed Land Disposal Restrictions (LDR)
treatment standards for underlying hazardous characteristics.
DuPont objected to the Agency's proposed classification. DuPont
claims that the removal of iron from the ilmenite ore is more
appropriately classified as beneficiation. DuPont remarked that the
separation of the iron chloride from the titanium ore grains results in
a beneficiated ore, similar in nature to commercially available
beneficiated ores that EPA has determined are Bevill exempt. The Agency
disagrees with this characterization, and concludes that since the ore
is chlorinated, that chlorination step changes the physical and
chemical structure of ore. The Agency's rationale for this decision is
discussed below.
The Agency reiterates its broad standard for making mineral
processing determinations described in 54 Fed. Reg. 36592, 36616,
September 1, 1989. Specifically, beneficiation operations typically
serve to separate and concentrate the mineral values from waste
material, remove impurities, or prepare the ore for further refinement.
Beneficiation activities do not, however, change the chemical structure
of the ore. Mineral processing operations, in contrast, generally
follow beneficiation and serve to change the concentrated mineral value
into a more useful chemical form and change the chemical composition of
the waste. In contrast to beneficiation operations, processing
activities often destroy the physical structure of the incoming ore or
mineral feedstock such that the materials leaving the operation do not
closely resemble those that entered the operation. Typically,
beneficiation wastes are earthen in character, whereas mineral
processing wastes are derived from melting or other chemical changes.
Today, the Agency again finds that DuPont's chloride-ilmenite
operation is mineral processing. In DuPont's process, chlorine gas is
reacted with the iron in the ore in the first step to produce a new and
significantly different chemical compound than the feedstock ore,
namely liquid waste iron chloride acid. The iron is more than simply
removed; the solid iron in the ore undergoes a chemical reaction with
the chlorine gas to form a new compound that is highly reactive and
non-earthen in character, namely iron chloride gas. This reaction is
the beginning of a significant change to the physical and chemical
structure of the ore. This change is similar to the reaction of
chlorine gas with solid titanium to form titanium tetrachloride gas.
The Agency finds that the net result of the reaction of chlorine gas
with both iron and titanium, which occur in the same vessel, destroys
the physical and chemical nature of the ore.
DuPont contends that the formation of iron chloride gas is simply a
process to remove an impurity from the ore. DuPont noted in its
comments that activities which remove impurities from ores and minerals
are classified as beneficiation and all wastes from beneficiation are
exempt from regulation under RCRA Subtitle C (see 40 CFR 261.4). DuPont
therefore contends that their processes are in fact beneficiation and
should not be classified as mineral processing.
As noted earlier, the Agency clarified the definition of
beneficiation and mineral processing in its 1989 rulemaking. That rule
clearly indicated that beneficiation serves to remove impurities as
long as the resultant materials remained earthen in nature and had not
undergone a physical/chemical change. The Agency studied the DuPont
process numerous times and met with the company several times to assure
that the Agency fully understood DuPont process. The Agency concludes
that chlorination of the ore causes a significant physical/chemical
change to the ore, and therefore the process is more indicative of
mineral processing than beneficiation. Further, in the DuPont case, the
removal of impurities is taking place simultaneously with
[[Page 28602]]
other reactions generating titanium gases. This reaction alone would
classify the process as mineral processing since the ore and titanium
gas are clearly physically and chemically dissimilar from that point on
in the process. The Agency stated in 1989 that once mineral processing
began, all wastes generated after that point would be classified as
mineral processing wastes, even those wastes which are similar to those
generated in beneficiation.
Thus, all wastes associated with the chloride-ilmenite production
of titanium tetrachloride are mineral processing wastes. They are
neither high volume nor low toxicity and therefore are not eligible for
the Bevill exemption.
VII. LDR Treatment Standards for Soil
This section discusses final regulations establishing land disposal
treatment standards specific to contaminated soil. Contaminated soil is
subject to the land disposal restrictions, generally, when it contains
a listed hazardous waste or when it exhibits a characteristic of
hazardous waste. (Throughout this discussion, the specific term
``hazardous contaminated soil'' refers to soil which contains a listed
hazardous waste or exhibits a characteristic of hazardous waste; the
more general term ``contaminated soil'' refers to both hazardous
contaminated soil and other soils--such as decharacterized soil--which
may be subject to the land disposal restrictions.) Prior to today's
rule, contaminated soil subject to LDRs was subject to the same land
disposal restriction treatment standards that apply to industrial
hazardous waste: soil contaminated by listed hazardous waste was
subject to the standards that apply to those listed wastes and soil
that exhibited a characteristic of hazardous waste was subject to the
same standards that apply to the characteristic waste. Today's final
rule establishes a new treatability group--contaminated soils--and
establishes land disposal restriction treatment standards specifically
tailored to that treatability group. Although EPA believes generators
of contaminated soil will typically choose to comply with the new soil
treatment standards promulgated today, under today's final rule, they
have the option of complying either with the existing treatment
standards for industrial hazardous waste (i.e., the universal treatment
standards) or the soil treatment standards. This is consistent with the
approach the Agency took in promulgating LDR treatment standards for
hazardous contaminated debris. 57 FR 37221, August 18, 1992.
EPA first proposed tailored land disposal restriction treatment
standards for contaminated soil in September 1993. 59 FR 48122--48131
(September 14, 1993). In the September 1993 proposal, EPA requested
comment on three soil treatment standard options. These three options
involved various combinations of percent reduction requirements for
hazardous constituents (typically ninety percent--90%) and multipliers
of the universal treatment standards (typically ten times the UTS--10 x
UTS). In response to comment on the September 1993 proposal, EPA
deferred a final decision on soil treatment standards to the Agency's
broader evaluation of application of RCRA requirements to remediation
wastes, the Hazardous Waste Identification Rule for Contaminated Media,
or HWIR-Media.
On April 29, 1996, as part of the HWIR-Media proposal, EPA again
proposed tailored land disposal restriction treatment standards for
contaminated soils. 61 FR at 11804 (April 29, 1996). In the April 29,
1996 proposal, soil-specific treatment standards would have required
reduction in concentrations of hazardous constituents by 90% with
treatment for any given constituent capped at ten times the universal
treatment standard. Id. This is commonly referred to as ``90% capped at
10 times UTS.''
In 1995, 1996 and 1997, EPA proposed new land disposal restriction
treatment standards for waste identified as hazardous because of metal
content and for mineral processing wastes. 60 FR 43654 (August 22,
1995) for metal wastes; 61 FR 2338 (January 25, 1996) for mineral
processing wastes; and, 62 FR 26041 (May 12, 1997) supplemental
proposal for both types of waste. In these proposals, soil contaminated
with metal or mineral processing waste would have been subject to the
new treatment standards for those wastes. This was consistent with the
way EPA had historically addressed contaminated soil and, at the time,
considered proper given that the proposals to establish soil-specific
treatment standards were not yet resolved.
EPA did not reopen the issue of whether LDRs apply to contaminated
soil or whether it is appropriate to require that contaminated soil
achieve the same LDR treatment standards as the contaminating waste
(soil contaminated by listed waste) or the characteristic property
(soil that exhibits a characteristic of hazardous waste) in the August
22, 1995, January 25, 1996, or May 12, 1997 proposals. Commenters,
nonetheless, strongly opposed application of the new LDR treatment
standards for metal and mineral processing wastes to soil contaminated
with those materials. At about the same time, EPA decided to go forward
with the soil-specific LDR treatment standards proposed in April 1996.
Therefore, the Agency is promulgating the land disposal restriction
treatment standards tailored to contaminated soils proposed on April
29, 1996 (i.e., 90% capped at 10xUTS) today, with the new LDR treatment
standards for metal and mineral processing wastes. The soil-specific
treatment standards promulgated today may be applied to any
contaminated soil that is restricted from land disposal, including but
not limited to soil contaminated by metal and mineral processing
wastes.
The land disposal restriction treatment standards for contaminated
soil promulgated today differ from the standards proposed on April 29,
1996 in three major ways. First, the Agency proposed that the soil
treatment standards would be available only for contaminated soil that
was managed under an approved cleanup plan (termed a remediation waste
management plan, or RMP). In today's final rule, the Agency is making
the soil treatment standards available for all contaminated soil that
is restricted from land disposal. Second, the Agency proposed that, for
soil contaminated by listed hazardous waste, treatment would be
required only for the hazardous constituents that originated from the
contaminating listed hazardous waste. When the soil treatment standards
are used, today's final rule requires all hazardous contaminated soil,
including soil contaminated by listed hazardous waste, to be treated
for each underlying hazardous constituent reasonably expected to be
present when such constituents are initially found at concentrations
greater than ten times the universal treatment standard. Third, in
response to comments asserting that the proposed regulations governing
the applicability of LDRs to contaminated soils were difficult to
understand, the Agency has reformatted these regulations into an
easier-to-read table. These changes, as well as other significant
issues associated with the soil treatment standards and responses to
comments, are discussed below.
Today's promulgation of land disposal restriction treatment
standards specific to contaminated soil is largely based on the April
29, 1996 proposal (62 FR at 18804-18818). It also relies on the
Agency's first effort to establish soil-specific treatment standards,
the LDR Phase II proposal (58 FR 48092, September 14, 1993). Today's
action
[[Page 28603]]
resolves the portions of the April 29, 1996 and September 14, 1993
proposals that address land disposal restriction treatment standards
for contaminated soil. However, other elements of the April 29, 1996
proposal remain open and will be acted on in a future rulemaking.
Responses to comments submitted on the soil treatment standards
proposals are included in the Soil Treatment Standards Response to
Comments Background Document, available in the docket for today's
action.
A. Application of Land Disposal Restriction Treatment Standards to
Contaminated Soil and Justification for Soil Specific LDRs
Prior to today's rule, soil that contained listed hazardous waste
or exhibited a characteristic of hazardous waste were prohibited from
land disposal unless they had been treated to meet the treatment
standards promulgated for pure industrial hazardous waste. This means
the same treatment standards which apply to a pure, industrial
hazardous waste were also applied to contaminated soil. 61 FR at 18804
(April 29, 1996) and other sources cited therein. In most cases then,
contaminated soils were subject to the treatment standards listed in 40
CFR 268.40, and the associated treatment standards in 40 CFR 268.48(a)
table Universal Treatment Standards (UTS).14
---------------------------------------------------------------------------
\14\ The exception is when waste contaminating soil is subject
to a specified treatment method; in that case, the contaminated soil
would also be subject to the specified treatment method.
---------------------------------------------------------------------------
As EPA has discussed many times, the treatment standards developed
for pure, industrial hazardous waste may be unachievable in
contaminated soil or may be inappropriate for contaminated soil due to
particularities associated with the soil matrix and the remediation
context under which most contaminated soil is managed, as discussed
below. For that reason, EPA is promulgating today's LDR treatment
standards specifically tailored to contaminated soil and to the
remedial context.
With respect to the soil matrix, the treatment standards developed
for pure hazardous waste (i.e., the universal treatment standards) are
generally either technically unachievable or technically or
environmentally inappropriate. For metal constituents, the UTS may not
be achievable in contaminated soil even using model technologies such
as stabilization or high temperature metal recovery. Stabilization
technologies are sensitive to soil characteristics such as the presence
of oxidizing agents and hydrated salts, the distribution of soil
particle size and the concentrations of sulfate and chloride compounds.
Various combinations of soil characteristics can impair the
effectiveness or rate of reaction in stabilization technologies. For
example, insoluble materials, such as materials that will pass through
a number 200 mesh sieve, can delay setting and curing during
stabilization, or small soil particles can coat larger soil particles
weakening bonds between particles and cement or other reagents. High
temperature metal recovery technologies may not be appropriate for some
contaminated soil given the low concentrations of metals that might be
present in the soil. In addition, clay and silt content in some soil
matrices may add undesired impurities to the metal concentrates or
alloys that are formed during high temperature metal recovery.
Although EPA has data showing that some soils can be treated to the
existing universal treatment standards for metals using stabilization
15 and high temperature metals recovery, the Agency
continues to believe that tailored soil treatment standards are
appropriate for metal contaminated soil to ensure that the wide variety
of soils can be effectively treated to meet the treatment standards. In
addition, the soil treatment standards will have the added
environmental benefit of encouraging greater use of innovative soil
treatment technologies such as soil or enhanced soil (acid) washing.
See, Proposed BDAT Background Document for Hazardous Soils, August
1993; Technical Resource Document: Solidification/Stabilization and its
Application to Waste Materials, EPA/530/R-93/012, June 1993; and,
Technology Screening Guide for Treatment of CERCLA Soils and Sludges,
EPA 540/2-88/004, September 1988.
---------------------------------------------------------------------------
\15\ These soil treatment data have been claimed as confidential
business information.
---------------------------------------------------------------------------
For soil contaminated with organic constituents, EPA has noted many
times that, notwithstanding the fact that such soils can be treated by
combustion to meet the universal treatment standards, it is generally
unsuitable or impractical from a technical standpoint to combust large
volumes of mildly contaminated soil. See, for example, 55 FR at 8760
and 8761 (March 8, 1990) and 61 FR 18806-18808 (April 29, 1996). In
addition, the Agency has documented potential difficulties that may
arise from the combustion of soil due to soil/contaminant
characteristics that affect incineration performance such as the
concentrations of volatile metals, the presence of alkali salts, fine
particles of soils such as clays and silts, and the ash fusion point of
the contaminating waste. For example, operation of an incinerator at or
near the waste ash fusion temperature can cause melting and
agglomeration of inorganic salts; the loading of clays and silts in
some soils may also result in high loadings of particulate matter in
flue gases. Proposed BDAT Background Document for Hazardous Soils,
August 1993 and Technology Screening Guide for Treatment of CERCLA
Soils and Sludges, EPA 540/2-88/004, September 1988.
With respect to the remedial context, EPA, the states, and the
regulated and environmental communities have long recognized that
application of the LDR treatment standards developed for pure,
industrial hazardous waste to contaminated soil can be
counterproductive. See, for example, ``Hazardous Waste: Remediation
Waste Requirements Can Increase the Time and Cost of Cleanups' U.S.
General Accounting Office, GAO/RCED-98-4, October 1997. Application of
LDRs developed for pure, industrial hazardous waste to contaminated
soil often presents remediation project managers with only two choices:
pursue a legal option of capping or treating hazardous contaminated
soil in place thereby avoiding a duty to comply with LDRs, or excavate
the soil and treat it to the full extent of best demonstrated available
technology, usually, for organic constituents, incineration. EPA has
found that this situation often creates an incentive to select remedies
that minimize application of LDRs (e.g., remedies that involve capping
or leaving untreated soil in place) a result obviously not contemplated
by Congress in enacting the LDR program.16 62 FR at pages
64505-64506 (Dec. 5, 1997) and 61 FR at 18808 (April 29, 1996) and
other sources cited therein.
---------------------------------------------------------------------------
\16\ As discussed in the April 29, 1996 proposal, EPA has, in
the past, justified the existing treatment standards, in part,
because they create an incentive to generate less of the affected
waste in the first instance. See, Steel Manufactures Association v.
EPA, 27 F.3d 642, 649 (D.C. Cir. 1994). In the remedial context, the
waste is already in existence; therefore waste minimization is not
an issue. Thus, application of the current LDR treatment standards
to remediation waste can have the perverse effect of creating an
incentive to avoid ``generating'' waste by leaving it in the ground.
The Agency believes that the goals of remediation are better served
by more aggresive remedial approaches, such as excavation and
management (including some degree of treatment) of remediation
wastes, that generally result in more permanent remedies. Such
approaches should, therefore, be encouraged.
---------------------------------------------------------------------------
Because of the differences between the remedial context (responding
to wastes which have already been released to the environment) and
[[Page 28604]]
regulation of wastes generated by on-going industrial process
(preventing wastes from being released into the environment in the
first instance), EPA has rejected the conclusion that treatment
standards for soil must be based upon the performance of the ``best''
demonstrated available treatment technology in the way the Agency has
historically interpreted these terms. Instead, the Agency has chosen to
develop soil treatment standards that can be achieved using a variety
of treatment technologies which achieve substantial reductions in
concentration or mobility of hazardous constituents and, because they
are generally used to treat contaminated soils in remedial settings, do
not present site managers with the type of dilemma described above. As
EPA has long maintained, the strong policy considerations that argue
for using the traditional BDAT analysis as the basis for LDR treatment
standards for hazardous wastes generated by on-going industrial
operations do not apply when evaluating BDAT in the remedial context.
In the remedial context, for example, waste minimization is not an
issue and the additional increment of treatment necessary to achieve
traditional BDAT may yield little if any environmental benefit over
other treatment options that adequately protect human health and the
environment. 54 FR 41568 (October 19, 1989). Indeed there is a
legitimate question as to whether a technology whose use results in
foregoing other substantial environmental benefits (such as more
aggressive, permanent remedies) can be considered a ``best''
technology. Portland Cement Association v. Ruckelshaus, 486 F. 2d 375,
385-86 at n. 42 (D.C. Cir. 1973); Essex Chemical Corp. v. Ruckelshaus,
486 F. 2d 427, 439 (D.C. Cir. 1973). This issue was discussed fully in
the April 29, 1996 proposal and in a number of other EPA documents,
see, for example, 54 FR 41568 (October 19, 1989) and 61 FR at 18808
(April 29, 1996) and other sources cited therein.
The soil treatment standards promulgated today will significantly
improve management of contaminated soil and remediations that involve
contaminated soil. However, the Agency emphasizes that today's rule
does not resolve the larger, more fundamental issues associated with
application of RCRA Subtitle C to remediation generally. The Agency
maintains that additional reform is needed to address, more
fundamentally, the application of certain RCRA subtitle C requirements
to all remediation wastes, including contaminated soil. The Agency will
continue to participate in discussions of potential legislation to
promote this additional needed reform. If legislation is not
forthcoming, the Agency may reexamine its approach to remediation waste
management, including the soil treatment standards.
B. Detailed Analysis of Soil Treatment Standards
All land disposal restriction treatment standards must satisfy the
requirements of RCRA section 3004(m) by specifying levels or methods of
treatment that ``substantially diminish the toxicity of the waste or
substantially reduce the likelihood of migration of hazardous
constituents from that waste so that short-term and long-term threats
to human health and the environment are minimized.'' As EPA has
discussed many times, the RCRA Section 3004(m) requirements may be
satisfied by technology-based standards or risk-based standards. This
conclusion was upheld in Hazardous Waste Treatment Council v. EPA, 886
F.2d 355, 362-64 (D.C. Cir. 1989), where technology-based LDR treatment
standards were upheld as a permissible means of implementing RCRA
Section 3004(m) provided they did not require treatment beyond the
point at which threats to human health and the environment are
minimized. Today's treatment standards for contaminated soils are
primarily technology-based; however, a variance from the technology-
based standards is allowed when EPA or an authorized state makes a
site-specific determination that threats posed by land disposal of any
given volume of contaminated soil are minimized at higher
concentrations.
1. Technology Basis for Soil Treatment Standards
The land disposal restriction treatment standards for soil require
that concentrations of hazardous constituents subject to treatment be
reduced by ninety percent (90%) with treatment for any given
constituent capped at ten times the universal treatment standard (10 X
UTS). In other words, if treatment of a given constituent to meet the
90% reduction standard would reduce constituent concentrations to less
than 10 X UTS, treatment to concentrations less than 10 X UTS is not
required. This is commonly referred to as ``90% capped by 10xUTS.''
As first discussed in the September 14, 1993 proposal, the Agency
has not used the statistical methods historically used in the land
disposal restriction program to establish the soil treatment standards.
In the past, the Agency has typically evaluated treatability data to
identify the ``most difficult to treat'' waste and established
treatment standards based on a statistical analysis of data from the
best demonstrated available treatment technology for that waste. See,
for example, 55 FR 26594 and 26605, June 23, 1989. While the existing
regulations allow treatment using any technology that will satisfy the
treatment standards, the practical impact of that approach is that
treatment using the most aggressive treatment technology available
(i.e., for organic constituents, destruction of organic constituents
based upon the performance of incineration) is often necessary to
achieve the treatment standards.
For contaminated soil, the Agency has chosen to establish
technology-based soil treatment standards at levels that are achievable
using a variety of common remedial technologies which destroy, remove
or immobilize substantial amounts of hazardous constituents. 58 FR
48129 (September 14, 1993). The levels chosen--90% reduction capped at
10 X UTS--are within the zone of reasonable levels the Agency could
have selected as treatment standards for contaminated soil.
Soil treatability data from EPA's Soil Treatment Database indicate
that the soil treatment standards are achievable and that the Agency
has selected a reasonable level of performance for the standard. After
screening the Database to eliminate data from tests reflecting poorly
designed or operated treatment, tests where EPA believes inappropriate
technologies were applied (for example, data from ``immobilization'' of
organic constituents), and other inappropriate data, the Agency was
left with 2,541 data pairs representing treatment of eighty hazardous
constituents including nine BDAT list metals.17 EPA then
analyzed these data to determine if the soil treatment standards could
be reliably achieved using demonstrated soil treatment technologies.
Based on this analysis, the Agency concluded that the soil treatment
standards can be reliably achieved using a variety of available soil
treatment technologies. The Agency concluded that the soil treatment
standards can be reliably achieved using: biological treatment,
chemical extraction, dechlorination, soil washing, stabilization and
thermal desorption. Of course, since soil treatment is generally matrix
dependent, the exact treatment technology which
[[Page 28605]]
might be applied to any given contaminated soil will depend on the
specific properties of the soil and the hazardous constituents of
concern. Choices about which soil treatment technology to apply should
be informed by appropriate use of bench and pilot scale studies and
good engineering judgement. EPA acknowledges that the treatment
efficiency necessary to achieve the soil treatment standards will
depend on, among other things, the initial concentrations of hazardous
constituents in any given volume of contaminated soil. Thus, not all
soil treatment technologies will be capable of treating every
contaminated soil to meet the standards adopted in this rule. However,
the Agency finds that the soil treatment standards typically can be
achieved by at least one of the demonstrated technologies, even in the
case of hard-to-treat hazardous constituents such as dioxins and
furans, polychlorinated biphenyls, and polynuclear aromatics.
---------------------------------------------------------------------------
\17\ A complete discussion of the Agency's method for screening
the Soil Treatment Database can be found in the LDR Phase II
proposal (58 FR 48129--48131, September 14, 1993) and the Best
Demonstrated Available Technology Background Document for Hazardous
Soil (August 1993).
---------------------------------------------------------------------------
Furthermore, the Agency has concluded that it is appropriate to
express the soil treatment standards as a treatment performance goal
capped by specific treatment levels. More specific standards, for
example, a single numerical standard for all soil, could be
counterproductive--less often achievable--given the varying
combinations of hazardous constituents and soil properties that might
be encountered in the field. 58 FR 48130 (September 14, 1993). An
express objective of this rule is to increase the range of appropriate
treatment alternatives available to achieve the LDR treatment standards
in soil to increase the likelihood that more remediations will include
treatment as a component of the remedy. This objective could be impeded
by adopting single numeric values as treatment standards, since that
approach would reduce needed flexibility. The resulting soil treatment
standards, while still technology-based, thus depart from EPA's past
methodology developed for process wastes in that they are not based
exclusively on the application of the most aggressive technology to the
most difficult to treat waste and are not expressed as a single numeric
value.
Like any land disposal restriction treatment standard, the soil
treatment standards may be achieved using any treatment method except
treatment methods which involve impermissible dilution (e.g., addition
of volume without destroying, removing or immobilizing hazardous
constituents or transfer of hazardous constituents from soil to another
medium such as air). For organic constituents, the soil treatment
standards for volatile organic constituents are based on the
performance of biotreatment, chemical extraction, dechlorination,
thermal desorption or soil vapor extraction. The standards for
semivolatile organic constituents are based on the performance of
biotreatment, chemical extraction, dechlorination, soil washing,
thermal desorption, or soil vapor extraction. The standards for
organochlorine pesticides are based on the performance of biotreatment,
dechlorination, hydrolysis, or thermal desorption. The standards for
phenoxyacetic acid pesticides are based on the performance of
dechlorination. The standards for polychlorinated biphenyls are based
on the performance of chemical extraction, dechlorination, or thermal
desorption. The standards for dioxins and furans are based on the
performance of dechlorination or thermal desorption. EPA does not have
specific data in the record on treatment of organophosphorous
insecticides. Because they are based on a similar chemical structure,
these contaminants, however, are likely as difficult to treat as other
polar nonhalogenated organic compounds and are expected to respond to
treatment in a manner similar to other polar nonhalogenated phenols,
phenyl ethers, and cresols. Therefore, EPA believes that
organophosphorous insecticides can be treated using the same
technologies as would otherwise be used to treat polar nonhalogenated
organics, i.e., biotreatment, chemical extraction, or thermal
desorption. For all organic constituents the soil treatment standards
are also achievable using combustion. EPA notes also that a number of
judicial opinions have upheld EPA's extrapolation of achievability
results for technology-based treatment standards based on chemical
structure and activity similarity, as has been used here. See, e.g.,
Chemical Manufacturers Ass'n v. EPA, 870 F. 2d 177, 248 (5th Cir. 1989)
and National Ass'n of Metal Finishers v. EPA, 719 F. 2d 624, 659 (3d
Cir. 1983). For metals, the soil treatment standards are based on the
performance of stabilization, and for mercury, chemical extraction.
Achievability of the soil treatment standards is discussed, in detail,
in section VII.B.8 of today's preamble.
a. Measuring Compliance With the Soil Treatment Standards For
hazardous constituents which have a treatment standard measured by
total waste analysis (i.e. standards for organic constituents and for
cyanide), compliance with the 90% reduction standard should generally
be measured using total constituent concentrations. For hazardous
constituents which have a treatment standard measured based on
concentrations in a TCLP extract (i.e., standards for metals and for
carbon disulfide, cyclohexanone and methanol), compliance with the 90%
reduction standard should generally be measured in leachate using the
toxicity characteristic leaching procedure. The exceptions to these
rules would be, for example, if soils contaminated with metal
constituents were treated using a technology which removed or
destroyed, rather than stabilized, metals. In an example like this,
compliance with the 90% reduction standards should generally be
measured using total constituent concentrations.
EPA takes this opportunity to clarify that when establishing the
concentrations of hazardous constituents in any given volume of
contaminated soil from which the 90% reduction will be measured, normal
soil characterization techniques and procedures for representative
sampling should be used. For example, it is not necessary to measure
the 90% reduction from the soil sample with the lowest concentrations
of hazardous constituents. EPA will publish additional guidance on
establishing and validating 90% reduction levels for contaminated soil
in the near future.
Today's rule does not change existing policies or guidance on soil
sampling or site characterization. Although soil is often characterized
using composite sampling, EPA notes that, consistent with the way the
Agency measures compliance with other LDR treatment standards,
compliance with the soil treatment standards will be measured and
enforced using grab samples. This is appropriate because well-designed
and well-operated treatment systems should ensure that soil is
uniformly treated.
b. Major Comments A number of commenters expressed concern about
the achievability of the soil treatment standards and/or the
methodology EPA used to develop the soil treatment standards. These
concerns are discussed in Section VII.B.8 of today's preamble and in
the response to comments document, available in the docket for today's
rulemaking.
2. The Soil Treatment Standards Satisfy RCRA Section 3004(m)
Requirements
The technology-based ``90% capped by 10 X UTS'' treatment standard
for contaminated soil is sufficiently stringent to satisfy the core
requirement of RCRA Section 3004(m) that short-term and long-term
threats to human health and the environment posed by
[[Page 28606]]
land disposal are minimized. Technology-based standards provide an
objective measure of assurance that hazardous wastes are substantially
treated before they are land disposed, thus eliminating the ``long-term
uncertainties associated with land disposal.'' Eliminating these
uncertainties was a chief Congressional objective in prohibiting land
disposal of untreated hazardous wastes. Hazardous Waste Treatment
Council v. EPA, 886 F.2d at 361-64. In addition, the extent of
treatment required, 90 % reduction capped at treatment to
concentrations within an order of magnitude of the UTS,
``substantially'' reduces mobility or total concentrations of hazardous
constituents within the meaning of RCRA Section 3004(m)(1).
EPA has made two changes from proposal which strengthen the soil
treatment standards to assure that they minimize threats to human
health and the environment. First, the Agency has modified its approach
to which hazardous constituents will be subject to treatment. In
today's rule, when the soil treatment standards are used, EPA requires
treatment for all hazardous constituents reasonably expected to be
present in contaminated soil when such constituents are initially found
at concentrations greater than ten times the universal treatment
standard. This treatment is required both for soil contaminated by
listed hazardous waste and soil that exhibits (or exhibited) a
characteristic of hazardous waste. Constituents subject to treatment
are discussed further in Section VII.B.4 of today's preamble.
To further ensure that contaminated soil treated to comply with the
soil treatment standards is safely managed, EPA has included additional
restrictions on the use of treated contaminated soil in hazardous
waste-derived products that are used in a manner constituting disposal
(i.e., when such products will be placed on the land). The restrictions
on use of treated contaminated soil in hazardous waste-derived products
that are used in a manner constituting disposal are discussed in
Section VII.B.5 of today's preamble.
Finally, the Agency reiterates that, in the remediation context, in
assessing whether threats posed by land disposal have been minimized,
one should appropriately consider the risks posed by leaving previously
land disposed waste in place as well as the risks posed by land
disposal of waste after it is removed and treated. 62 FR at 64506
(December 5, 1997). For example, if a treatment standard for organic
constituents based on performance of incineration typically results in
already land disposed materials such as contaminated soils being capped
in place rather than more aggressively remediated, threats posed by
land disposal of the waste ordinarily would not be minimized.
Conversely, a treatment standard that results in substantial treatment
followed by secure land disposal can be said to minimize threats,
taking into account the totality of threats posed (i.e. including those
posed if the soil were left in place untreated). Id. The soil treatment
standards will ordinarily ensure that contaminated soil is
appropriately treated within the meaning of RCRA Section 3004(m),
considering both the threats posed by new land disposal of treated soil
and the threats posed by on-going land disposal of existing
contaminated soil (e.g., if the soil were left in place untreated).
EPA recognizes that some people may be concerned that a situation
may arise where the soil treatment standards are at levels that are
higher than those that EPA or an authorized state believes should be
required for soil cleanup under a cleanup program. The Agency
acknowledges that this may occur. The soil treatment standards, like
other land disposal restriction treatment standards, are based on the
performance of specific treatment technologies. As discussed earlier in
today's preamble, technology-based standards have been upheld as a
permissible means of implementing RCRA Section 3004(m). Most soil
cleanup levels are based not on the performance of specific treatment
technologies but on an analysis of risk. For this reason, technology-
based treatment standards will sometimes over-and sometimes under-
estimate the amount of treatment necessary to achieve site-specific,
risk-based goals.
The purpose of the land disposal restriction treatment standards is
to ensure that prohibited hazardous wastes are properly pre-treated
before disposal (i.e., treated so that short- and long-term threats to
human health and the environment posed by land disposal are minimized).
As discussed above, the Agency believes the soil treatment standards
promulgated today fulfill that mandate for soil that contains
prohibited listed hazardous waste or exhibits a characteristic of
prohibited hazardous waste. However, technology-based treatment
standards are not necessarily appropriate surrogates for site-specific
risk-based cleanup levels. In a circumstance where the soil treatment
standards result in constituent concentrations that are higher than
those determined, on a site-specific basis, to be required for soil
cleanup, existing remedial programs such as RCRA Corrective Action,
CERCLA and state cleanup programs could be applied to ensure that
remedies are adequately protective. These programs already ensure
protection of human health and the environment when managing most
contaminated soils--i.e., soils that are not subject to the LDRs--and
other remediation wastes. Furthermore, as discussed later in today's
rule, treated contaminated soil would remain subject to regulation
under RCRA Subtitle C unless and until EPA or an authorized state made
an affirmative decision that the soil did not contain hazardous waste
or, in the case of characteristic soil, no longer exhibited a hazardous
characteristic.
3. Variance From the Soil Treatment Standards at Risk-Based Levels
EPA has long indicated that its preference would be to establish a
complete set of risk-based land disposal treatment standards at levels
that minimize short- and long-term threats to human health and the
environment. See, for example, 55 FR at 6641 (Feb. 26, 1990). However,
the difficulties involved in establishing risk-based standards on a
nationwide basis are formidable due in large part to the wide variety
of site-specific physical and chemical compositions encountered in the
field and the uncertainties involved in evaluating long-term threats
posed by land disposal. Id.; 60 FR 66380--66081 (Dec. 21, 1995). For
these reasons the Agency has chosen to establish land disposal
restriction treatment standards based on the performance of specific
treatment technologies. Although technology-based treatment standards
are permissible, they may not be established at levels more stringent
than those necessary to minimize short and long-term threats to human
health and the environment. Hazardous Waste Treatment Council, 886 F.
2d at 362 (land disposal restriction treatment standards may not be
established, ``beyond the point at which there is not a ``threat'' to
human health or the environment'').
While using risk-based approaches to determine when threats are
minimized on a national basis has proven extremely difficult, these
difficulties will diminish when evaluating risks posed by a specific
contaminated soil in a particular remediation setting since, during
remediation, one typically has detailed site-specific information on
constituents of concern, potential human and environmental receptors,
and potential routes of exposure. For this reason, EPA is establishing
a site-specific variance from the technology-based soil treatment
standards, which
[[Page 28607]]
can be used when treatment to concentrations of hazardous constituents
greater (i.e., higher) than those specified in the soil treatment
standards minimizes short- and long-term threats to human health and
the environment. In this way, on a case-by-case basis, risk-based LDR
treatment standards approved through a variance process could supersede
the technology-based soil treatment standards. This approach was first
discussed in the September 14, 1993 proposal, where EPA proposed that
determinations that contaminated soil did not or no longer contained
hazardous waste could supersede LDR treatment standards, if the
``contained-in'' level also constituted a ``minimized threat'' level.
It was repeated in the April 29, 1996 proposal where the Agency
proposed that, in certain circumstances, variances from land disposal
restriction treatment standards could be approved in situations where
concentrations higher than the treatment standards minimized
threats.\18\ 58 FR at 48128 (September 14, 1993) and 61 FR at 18811 and
18812 (April 29, 1996).
---------------------------------------------------------------------------
\18\ In the April 29, 1996 proposal, the Agency proposed to
limit variances based on a site-specific minimize threat
determination to contaminated soils where all concentrations of
hazardous constituents were below a ``bright line,'' that is, below
a certain risk level. The Agency also requested comment on extending
site-specific minimize threat variances to other contaminated soils.
Based on further consideration and consideration of comments, the
Agency is persuaded that a site-specific minimize threat variance
should be available to all contaminated soils. The Agency believes
this is proper because the outcome of a site-specific, risk-based
minimize threat variance--alternative, site-specific LDR treatment
standards based on risk--will be the same regardless of the initial
concentrations of hazardous constituents. In any case, the Agency is
not, at this time, taking action on the portion of the April 29,
1996 proposal that would have established a ``bright line'' to
distinguish between higher- and lower-risk media. If, in the future,
the Agency takes action to establish a bright line, it will address
the relationship of a bright line to site-specific minimize threat
variances.
---------------------------------------------------------------------------
At this time, EPA is allowing the risk-based variances only for
contaminated soils. The Agency believes this limitation is appropriate
for a number of reasons. First, contaminated soils are most often
generated during agency overseen cleanups, such as CERCLA cleanups,
RCRA corrective actions or state overseen cleanups. This type of
involvement in cleanups positions EPA and authorized states to
appropriately consider site-specific, risk-based issues. Second, during
remediation, experts and field personnel typically gather detailed
site-specific information on risks posed by specific hazardous
constituents or combinations of hazardous constituents, potential
direct and indirect exposure routes, risk pathways and human and
environmental receptors. Through application of this information,
overseeing agencies can eliminate many of the long-term uncertainties
associated with land disposal and, therefore, make appropriate risk-
based decisions regarding the extent of treatment needed to minimize
short- and long-term threats to human health and the environment from
any given hazardous constituent or combination of hazardous
constituents. EPA and state officials already routinely make these
types of decisions when developing site-specific, risk-based cleanup
levels and when making decisions about whether any given contaminated
medium contains hazardous waste.19 After experience
implementing the site-specific minimize threat variance for
contaminated soil, the Agency may consider extending it to other
environmental media and remediation wastes.
---------------------------------------------------------------------------
\19\ While not forbidden, the Agency believes that site-
specific, risk-based minimize threat determinations will rarely be
made in the context of an independent or voluntary cleanup action,
since, in these types of actions, an overseeing Agency will not,
typically, have been involved in the identification exposure
pathways and receptors of concern or the calculation of site-
specific, risk-based cleanup levels. Of course, generators could
apply for a site-specific, risk-based minimize threat variance
during an independent or voluntary cleanup and, provided EPA or an
authorized state agreed that the proposed alternative treatment
standards minimized threats considering appropriate exposure
pathways and receptors, a variance could be approved.
---------------------------------------------------------------------------
Some commenters expressed concern that allowing site-specific,
risk-based minimize threat determinations would abrogate the Agency's
responsibilities under RCRA Section 3004(m). The Agency strongly
disagrees. RCRA Section 3004(m) requires EPA to establish ``levels or
methods of treatment, if any. * * *.'' In the case of contaminated
soil, EPA is establishing those levels today based on the performance
of available, appropriate soil treatment technologies. Providing a
variance process to modify a level or method of treatment on a case-by-
case basis reduces the likelihood that in any particular situation
technology-based treatment standards will result in treatment beyond
the point at which threats are minimized. The Agency is requiring that
minimize threat variance determinations for contaminated soils be
evaluated using the existing site-specific variance process set out in
40 CFR 268.44(h). EPA recently added language to this provision to
clarify that variances cannot be approved without opportunity for
public participation, including notice by appropriate means,
opportunity for public comment and adequate explanation of an ultimate
determination. 62 FR at 64507 (Dec. 5, 1997).
While not required, EPA anticipates that decisions about site-
specific minimize threat decisions variances will often be combined
with decisions that soil no longer contains hazardous waste. As
discussed later in today's preamble, Agency guidance on ``contained-
in'' determinations is essentially the same as the requirements for
site-specific, risk-based minimize threat determinations promulgated
today. For that reason, EPA believes it will always be appropriate to
combine a contained-in determination with a site-specific, risk-based
minimize threat variance. In these cases, EPA encourages program
implementors and facility owners/operators to include information about
the ``contained-in'' decision in the public notice of the site-specific
minimize threat variance. In cases where a site-specific minimize
threat variance is combined with a decision that a soil no longer
contains hazardous waste, once treated to comply with the treatment
standard imposed by the variance, the soil would no longer have any
obligations under RCRA Subtitle C and could be managed--including land
disposed--without further control under RCRA Subtitle C. The contained-
in policy is discussed in more detail in Section VII.B.8 and Section
VII.E of today's preamble.
EPA reminds program implementors that, consistent with the rest of
the land disposal restriction program, site-specific determinations
that threats are minimized cannot be based on the potential safety of
land disposal units, or engineered structures such as liners, caps,
slurry walls or any other practice occurring after land disposal.
American Petroleum Inst. v. EPA, 906 F.2d 729, 735-36 (D.C. Cir. 1990)
(land treatment cannot be considered in determining whether threats
posed by land disposal have been minimized because land treatment is a
type of land disposal and section 3004(m) requires that threats be
minimized before land disposal occurs); see also S. Rep. No. 284, 98th
Cong. 1st sess. at 15, stating that engineered barriers cannot be
considered in assessing no-migration variances because ``[a]rtificial
barriers do not provide the assurances necessary to meet the
standard.'' This means that site-specific minimize threat
determinations must be based on the inherent threats any given
contaminated soil would pose. The Agency recognizes that this will have
the effect of precluding site-specific minimize threat variances for
remedies that rely, even in part, on capping, containment or other
physical or institutional controls. In
[[Page 28608]]
addition to being compelled by the statute, the Agency believes this
approach is proper, in that it may encourage remedy choices that rely
more predominantly on treatment to permanently and significantly reduce
the concentrations (or mobility) of hazardous constituents in
contaminated soil. The Agency has a strong and longstanding preference
for these types of more permanent remedial approaches.
In addition, at a minimum, alternative land disposal restriction
treatment standards established through site specific, risk-based
minimize threat variances should be within the range of values the
Agency generally finds acceptable for risk-based cleanup levels. That
is, for carcinogens, alternative treatment standards should ensure
constituent concentrations that result in the total excess risk from
any medium to an individual exposed over a lifetime generally falling
within a range from 10-4 to 10-6, using
10-6 as a point of departure and with a preference, all
things being equal, for achieving the more protective end of the risk
range. For non-carcinogenic effects, alternative treatment standards
should ensure constituent concentrations that an individual could be
exposed to on a daily basis without appreciable risk of deleterious
effect during a lifetime; in general, the hazard index should not
exceed one (1). Constituent concentrations that achieve these levels
should be calculated based on a reasonable maximum exposure scenario--
that is, based on an analysis of both the current and reasonably
expected future land uses, with exposure parameters chosen based on a
reasonable assessment of the maximum exposure that might occur. The
Agency believes these represent an appropriate range of minimum values
for site-specific, risk-based minimize threat determinations because
sites cleaned up to these levels are typically released from regulatory
control under the Federal CERCLA program and the RCRA corrective action
program. See, for example, the National Contingency Plan (55 FR 8666,
March 8, 1990) the 1990 RCRA Corrective Action Subpart S Proposal (55
FR 30798, July 27, 1990), and the 1996 RCRA Corrective Action Subpart S
ANPR (61 FR 19432, May 1, 1996). In addition to achieving protection of
human health, alternative treatment standards must ensure that
environmental receptors are protected and must also ensure that no
unacceptable transfer of contamination from one medium to another, for
example, from soil to ground water, will occur.\20\ Protection of
environmental receptors and against cross-media contamination may, in
some cases, require more stringent (i.e., lower) alternative treatment
standards than would be necessary to protect human health alone. The
Agency recognizes that this approach is different from the approach
used in developing national risk-based minimize threat levels proposed
in the Hazardous Waste Identification Rule (HWIR-Waste). 60 FR 66344
(December 21, 1995). This difference is proper, in that the HWIR-Waste
proposal contemplated nationally-applicable risk-based LDR treatment
standards and, therefore, had to consider the myriad of potential
exposure pathways and receptors which might occur at any given site,
nation wide. A site-specific minimize threat determination is informed
by actual and reasonable potential exposure pathways and receptors at a
specific land disposal location.
---------------------------------------------------------------------------
\20\ Unacceptable cross-media transfer would include, for
example, transfer of contaminants from soil to air in excess of
applicable air emission standards.
---------------------------------------------------------------------------
Although not expressly limited to land disposal of contaminated
soil on-site, EPA anticipates that site-specific minimize threat
variances will, most often, be applied to these activities. The basis
for developing an alternative land disposal restriction treatment
standard during the site-specific minimize threat variance is
application of risk information about specific exposure pathways and
receptors of concern. To apply such a variance to off-site land
disposal, the treatment standard would have to be informed by the
exposure pathways and receptors present at the off-site land disposal
areas (assuming no physical or engineered structures or other post-
land-disposal controls). While such an analysis is allowed, this
information is not, to the Agency's knowledge, routinely gathered
during site remediation.
Most commenters supported the concept of using a treatment variance
to reduce the likelihood that, in any particular case, technology-based
soil treatment standards might prompt treatment beyond the point at
which threats to human health and the environment are minimized.
One commenter was concerned that establishing a risk-based minimize
threat variance without adequate minimum standards would be contrary to
law and impossible to oversee. EPA was, in part, persuaded by these
comments and has added a requirement that, at a minimum, alternative
LDR treatment standards approved through a site-specific minimize
threat variance be within the range of acceptable values the Agency
typically uses for cleanup decisions, as discussed above. In addition,
as discussed above, the Agency has clarified that, unlike some CERCLA
or RCRA corrective action remedies, site-specific minimize threat
variances may not rely on post-land disposal controls.
4. Constituents Subject to Treatment
For soil contaminated by listed hazardous waste, EPA proposed that
treatment would be required for each hazardous constituent originating
from the contaminating waste. For soil which exhibits (or exhibited) a
characteristic of hazardous waste, EPA proposed that treatment would be
required: (1) in the case of TC soil, for the characteristic
contaminant; (2) in the case of ignitable, reactive or corrosive soil,
for the characteristic property; and, (3) in both cases, for all
underlying hazardous constituents. 61 FR at 18809 (April 29, 1996).
Under the 1996 proposal, treatment would have been required only when
those constituents were initially present at concentrations greater
than ten times the universal treatment standard. EPA also requested
comment on, among other things, whether, for soil contaminated by
listed hazardous waste, treatment should be required for all underlying
hazardous constituents present at concentrations above ten times the
UTS. Underlying hazardous constituent is defined in 40 CFR 268.2(i) as,
``any constituent listed in 40 CFR 268.48 table UTS, except fluoride,
sulfides, vanadium, selenium, and zinc, which can reasonably be
expected to be present at the point of generation of the hazardous
waste, at a concentration above the constituent-specific UTS treatment
standards.''
Many commenters supported the proposed approach. Some commenters,
however, expressed concern that, because contaminated soil often
contains numerous hazardous constituents from a variety of sources,
limiting treatment of soil contaminated by listed hazardous waste to
constituents originating from the contaminating waste might result in
soil contaminated with listed waste undergoing less treatment than soil
which exhibits (or exhibited) a characteristic of hazardous waste. One
commenter also asserted that the proposed approach to constituents
subject to treatment was, in the case of soil contaminated by listed
hazardous waste, inconsistent with the Chemical Waste opinion. On
further consideration, EPA was persuaded that it is prudent to apply
the logic of the
[[Page 28609]]
Chemical Waste opinion both to soil contaminated by listed hazardous
waste and to soils which exhibit a characteristic of hazardous waste.
As the Agency explained in the 1996 proposal, contaminated soils
are potentially contaminated with a wider range of hazardous
constituents than most pure hazardous wastes generated by on-going
industrial processes--in no small part because contaminated soils
generally reflect uncontrolled disposal settings. 58 FR at 48124
(September 14, 1993). Since the Chemical Waste opinion addressed a
similar situation (certain characteristic hazardous wastes that might
contain a variety of hazardous constituents), the Agency is persuaded
that it is prudent to apply the logic of the Chemical Waste opinion to
contaminated soil and require treatment of all underlying hazardous
constituents. See Chemical Waste Management v. US EPA, 976 F.2d at 16-
18 (D.C. Cir 1992). Therefore, when the soil treatment standards are
used, today's final rule requires that all contaminated soil subject to
the LDRs be treated to achieve the soil treatment standards for each
underlying hazardous constituent reasonably expected to be present in
the soil when such constituents are initially found at concentrations
greater than ten times the universal treatment standard. In addition to
treatment of all underlying hazardous constituents as discussed above,
as proposed, characteristic soil must also be treated, in the case of
TC soil, for the TC constituent and, in the case of ignitable,
corrosive, or reactive soil, for the characteristic property.
Although, when the soil treatment standards are used, treatment is
now required for each underlying hazardous constituent when such
constituents are initially found at concentrations greater than ten
times the universal treatment standard, it will not be necessary to
monitor soil for the entire list of underlying hazardous constituents.
Generators of contaminated soil can reasonably apply knowledge of the
likely contaminants present and use that knowledge to select
appropriate underlying hazardous constituents, or classes of
constituents, for monitoring. This is consistent with the approaches
EPA typically takes in remedial programs, where it emphasizes that
remediation managers should focus investigations on constituents of
concern and with regulations that allow generators to rely on knowledge
to determine whether any given solid waste is hazardous. Cf. 61 FR at
19444 where EPA encouraged remediation managers to ``tailor [facility
investigations] to the specific conditions and circumstances at the
facility and focus on the units, releases, and exposure pathways of
concern.''
For nonanalyzable constituents, EPA is promulgating the approach
discussed in both the September 14, 1993 and the April 29, 1996
proposals. In situations where contaminated soil contains both
analyzable and nonanalyzable organic constituents, treating the
analyzable constituents to meet the soil treatment standards is also
reasonably expected to provide adequate treatment of the nonanalyzable
constituents. In situations where contaminated soil contains only
nonanalyzable constituents (i.e., soil contaminated only by
nonanalyzable U or P listed wastes), treatment using the specified
method for the appropriate U or P listed waste is required. 61 FR at
18810, April 29, 1996. Most commenters supported this approach.
5. Relationship of Soil Treatment Standards to Naturally Occurring
Constituents
In the April 29, 1996 proposal EPA requested comment on whether
concentrations of naturally occurring constituents should be evaluated
when identifying constituents subject to treatment. Commenters who
addressed this issue overwhelmingly recommended that, for naturally
occurring constituents, EPA cap LDR treatment requirements for soil at
natural background concentrations. After considering these comments,
EPA was persuaded that treatment to comply with LDRs should not be
required if constituent concentrations fall below naturally occurring
background concentrations, provided the soil will continue to be
managed on site or in an area with similar natural background
concentrations. If soil will be sent for land disposal off-site,
compliance with LDRs is required, since the Agency believes that
natural background concentrations on-site will not automatically
correspond to natural background concentrations at a remote land
disposal facility.
The Agency notes that, for purposes of this discussion, natural
background concentrations are constituent concentrations that are
present in soil which has not been influenced by human activities or
releases. Since these constituent concentrations are present absent
human influence and EPA has determined that soil (like other
environmental media) is not, of itself, a waste but may be regulated as
hazardous waste under RCRA only when it contains (or contained) waste,
EPA is not convinced the Agency would have the authority to require
compliance with LDRs when constituent concentrations fall below
background concentrations even if it felt compelled to do so. (Of
course, such constituents could be regulated as hazardous constituents
under state and Federal cleanup authorities, including RCRA corrective
action and other authorities.)
Since natural background concentrations may vary across geographic
areas, and to ensure that LDRs will only be capped at background where
appropriate, EPA will require that individuals who wish to cap LDR
treatment at natural background concentrations apply for and receive a
treatment variance. EPA will presume that when LDRs would require
treatment to concentrations that are less than natural background, such
a variance will be appropriate, based on the finding that it is
inappropriate, for contaminated soil, to require treatment to
concentrations less than natural background concentrations. This issue
has been clarified in today's final regulations, see 40 CFR
268.44(h)(4).
6. Restrictions on Use of Treated Hazardous Contaminated Soil in
Products Used in a Manner Constituting Disposal
Although, as discussed earlier in today's preamble, EPA believes
the soil treatment standards satisfy the requirements of RCRA Section
3004(m), EPA has determined that additional restrictions are necessary
for hazardous contaminated soils that are used to produce products
which are, subsequently, used in a manner constituting disposal (i.e.,
used to produce products which are placed in or on the land). Under
current regulations, hazardous waste-derived products that are used in
a manner constituting disposal must, among other things, comply with
the applicable land disposal restriction treatment standards in 40 CFR
part 268.40, that is, the Universal Treatment Standards. See 40 CFR
266.23(a). EPA has concluded that hazardous contaminated soil used to
produce products which are, subsequently, used in a manner constituting
disposal must continue to meet the universal treatment standards. Such
products, then, are not eligible for the soil treatment standards
promulgated today. EPA has made this decision for several reasons.
First, EPA has chosen technology-based treatment standards (such as
today's soil treatment standards) as a means of implementing the LDR
statutory requirements in order to eliminate as many of the
uncertainties associated with land disposal of hazardous waste as
possible.
[[Page 28610]]
55 FR at 6642 (Feb. 26, 1990). These uncertainties increase sharply
when one considers possible dispositions of hazardous waste-derived
products used in a manner constituting disposal. These products can be
placed virtually anywhere, compounding potential release mechanisms,
exposure pathways, and human and environmental receptors. 62 FR at
64506 (Dec. 5, 1997) and 53 FR at 31197-98 (August 17, 1988). For these
reasons, the Agency in 1988 determined that these wastes should be
treated to reflect the best treatment available, 53 FR at 31197-98, and
the Agency believes this reasoning continues to hold with respect to
contaminated soils. Second, EPA has determined that the soil treatment
standards adopted in today's rule are justified, in many instances, in
order to encourage remediation involving treatment over remedies that
involve leaving un-treated contaminated soils in place. The Agency is
less sure that this is a desirable incentive if the contaminated soils
are to be used in a manner constituting disposal, again because of the
uncertainties posed by this method of land disposal.
Note that EPA has explained, however, that remediation activities
involving replacement of treated soils onto the land is not a type of
use constituting disposal, in part, because it is a supervised
remediation instead of an unsupervised recycling activity. 62 FR 26063
(May 12, 1997). This interpretation is not affected by today's
rulemaking.
7. Availability of Soil Treatment Standards
EPA proposed that soil-specific land disposal restriction treatment
standards would be available only for contaminated soils managed under
an agency approved, site-specific cleanup plan termed a Remediation
Management Plan or ``RMP.'' The Agency also specifically requested
comment on whether soil-specific treatment standards should be made
available to all contaminated soil. 61 FR at 18813 (April 29, 1996).
The majority of commenters who addressed this issue strongly supported
extending the soil treatment standards to all contaminated soil. These
commenters argued that extending soil-specific LDRs to all contaminated
soil would encourage voluntary and independent cleanups, especially at
low and medium priority sites where a regulatory agency might not have
the resources to provide real-time oversight through a ``RMP.'' After
considering these comments, EPA is persuaded that the soil treatment
standards should be available for all contaminated soil and has revised
the regulations accordingly.
EPA's thinking in proposing to require a site-specific remediation
management plan to take advantage of the soil treatment standards was
that site-specific oversight, and potentially modification of the
treatment standards, would be necessary to ensure that all contaminated
soils were appropriately treated. 61 FR at 18807 (April 29, 1996).
However, EPA now concludes that the soil treatment standards will
ensure adequate treatment of all contaminated soils for two reasons.
First and primarily, the residuals from treatment of hazardous
contaminated soil will typically continue to be regulated as hazardous
waste and will remain subject to applicable RCRA Subtitle C
requirements. 61 FR at 18810 (April 29, 1996). Non-soil residuals, such
as wastes generated during application of separation technologies, will
be regulated as hazardous wastes if they exhibit a characteristic of
hazardous waste or if they derive from treating a soil which contains
listed hazardous waste. Therefore, these types of non-soil residuals
will typically be subject to the universal treatment standards in 40
CFR 268.40. See 57 FR at 37240 (Aug. 18, 1992) where EPA took the same
approach for residues from treating contaminated debris. Soil residuals
will also be regulated as hazardous waste unless it is determined that
the soil does not contain hazardous waste.21 For example,
application of a thermal desorption technology would likely generate
two types of residuals: treated soil (soil residual) and concentrated
contaminants removed from the soil and captured in an air pollution
control device (non-soil residual). If the contaminated soil contained
a listed hazardous waste or exhibited a characteristic of hazardous
waste at the time of treatment, both residuals would continue to be
subject to RCRA Subtitle C regulations. The non-soil residual would be
required to comply with applicable universal treatment standards prior
to land disposal; the soil residual would generally require land
disposal in a Subtitle C unit unless a ``contained-in'' determination
was made. Therefore, although a remediation management plan is no
longer required to take advantage of the soil treatment standards, a
site-specific decision is still required before treated contaminated
soil can exit the system of RCRA regulations.
---------------------------------------------------------------------------
\21\ The exception would be soil residuals from treatment of
soils which were determined no longer to contain a listed hazardous
waste or were decharacterized and yet remained subject to LDRs. In
this case, since the treatment would be performed on non-hazardous
soil, the soil residuals would also be considered non-hazardous.
---------------------------------------------------------------------------
Second, as noted earlier, EPA has extended the treatment
requirement to all underlying hazardous constituents reasonably
expected to be present in contaminated soils when such constituents are
found at initial concentrations greater than ten times the universal
treatment standard and retained current treatment requirements for
hazardous contaminated soils used to produce products that are
subsequently used in a manner constituting disposal.
8. Achievability of Contaminated Soil Treatment Standards
The soil treatment standards promulgated today are based primarily
on the data for soil treatability found in EPA's Soil Treatment
Database (SDB). See, Best Demonstrated Available Treatment Background
Document for Hazardous Soils, August 1993 and LDR Phase 2 proposal at
58 FR 48122, Sept. 14, 1993. Data from the soil treatment database are
corroborated by more recent performance data for non-combustion
treatment of remediation wastes. See Soil Treatability Analysis:
Analysis of Treatability Data for Contaminated Soil Treatment
Technologies (April 1998, USEPA) and references cited in note 5 below.
The soil treatment data base contains 6,394 pairs of data points
(for the same sample, one datum for untreated soil and one datum for
treated soil) describing the treatment of hazardous constituents in
contaminated soils managed under the RCRA and the Superfund programs.
After screening the database to eliminate data from tests reflecting
poorly designed or operated treatment, tests where EPA believes
inappropriate technologies were applied (for example, data from
immobilization of organic constituents) and other inappropriate data,
the Agency was left with 2,541 pairs of data points. These data pairs
depict treatment of ninety-four hazardous constituents, including
eighty-five organic constituents and nine BDAT list metals. The
retained 2,541 pairs of data points from the soil treatment database
represent the treatment of organic and metal constituents by various
technologies including: combustion, biological treatment, chemical/
solvent extraction, dechlorination, thermal desorption, air/steam
extraction, photolysis, soil washing, stabilization, and vitrification.
The soil treatment database includes performance data from bench,
pilot, and full scale technologies. A complete discussion of the
Agency's method for
[[Page 28611]]
screening the Soil Treatment Database can be found in the LDR Phase II
proposal (58 FR 48129-31, September 14, 1993) and the Best Demonstrated
Available Technology Background Document for Hazardous Soil (August
1993).
A number of commenters were concerned that aggregated data, i.e.,
the 2,541 pairs of data points representing the combined performance of
combustion and non-combustion technologies, may mask the performance of
non-combustion technologies alone. Commenters urged EPA to disaggregate
these performance data to allow for more accurate analysis of non-
combustion technology performance. As a result, EPA has disaggregated
the combustion and non-combustion treatment data for purposes of
analyzing the achievability of today's soil treatment standards. See
generally, Soil Data Analysis: Soil Treatability Analysis of
Treatability Data for Contaminated Soil Treatment Technologies (April
1998, USEPA) and Additional Information on Treatability of Contaminated
Soils as Discussed in Section VII.B.8. of Phase IV Final Rule Preamble
(April 1998, USEPA).
After separating out combustion data, the remaining non-combustion
soil treatment data base is reduced from 2,541 to 2,143 paired data
points. These 2,143 22 data pairs depict the treatment of 72
organics 23 and nine metals in contaminated by biological
treatment, chemical and solvent extraction, dechlorination, thermal
desorption, air and steam stripping, hydrolysis, photolysis, soil
washing, and stabilization.
---------------------------------------------------------------------------
\22\ One single datum from the vitrification of p,p'DDT was not
included since it appears to have resulted from treatment that was
not optimally designed or conducted.
\23\ Out of 85 organic constituents, only 13 were treated
exclusively by combustion. See, however, the discussion later in
this preamble with regard to presence of data from incineration and
extrapolation of data among organic constituents.
---------------------------------------------------------------------------
As discussed earlier in today's preamble, EPA did not use the
traditional BDAT approach to develop the soil treatment standards.
Instead, the Agency evaluated data from the 2,143 non-combustion data
pairs in the soil treatment database to identify, generally, the level
of performance non-combustion soil treatment technologies achieve. In
light of our multi-faceted objectives regarding remediation of
contaminated soils (discussed earlier in this preamble), this approach
and methodology are appropriate. As noted earlier in today's preamble,
the numerical values chosen for soil treatment standards--90% reduction
capped at ten times the UTS--are within the zone of reasonable values
from which the Agency can properly select.
For soil contaminated with organic constituents, the retained 2,143
data pairs from the soil treatment database show generally that soils
with moderate levels of contamination are more amenable to treatment by
non-combustion technologies than soils with high levels of
contamination. However, the data also show that the soil treatment
standards promulgated today can be achieved by non-combustion
technologies even in cases when soils contain elevated levels of
harder-to-treat organic hazardous constituents, such as dioxins and
furans, polychlorinated biphenyls (PCBs), and polynuclear aromatics
(PNAs). The available data on the performance of non-combustion
technologies suggest that some technologies are more effective with
certain organics within specific families or chemical functional
groups. For example, while many organic treatment technologies were
effective in removing volatile organics from the soils, dechlorination
is more effective than other non-combustion treatment technologies for
treating chlorinated organics. For soil contaminated by metals, the
retained 2,143 data points from the soil treatment database show that
metals can typically be treated via stabilization to meet the soil
treatment standards.
Although, for the reasons discussed earlier in today's preamble,
EPA has elected to base the soil treatment standards on the performance
of non-combustion technologies, combustion of soil is not prohibited.
This is consistent with all other numerical treatment standards, which
can likewise be achieved through use of any technology (other than
impermissible dilution). It may be that combustion is, in fact, chosen
as the remedial treatment technology at certain sites, most likely
because of economic considerations (such as in the case of low soil
volumes where on-site treatment units are not economically viable).
Selection of the best treatment technology for the specific soil type
and range of contaminants present at any given remediation site is a
site-specific decision assuming, for soils subject to the LDRs, that
the selected technology does not involve impermissible dilution and
that today's soil treatment standards are met. Further details about
the results of EPA's examination of treatment technologies for
different groups of contaminants are discussed in the succeeding
sections.
a. Comments. Many commenters expressed concern that the retained
2,541 data points from the soil treatment database might not adequately
address the many types of soils and contaminated site scenarios that
may arise in the field. Among other things, these commenters asserted
that: (1) the list of chemical organic constituents for which EPA has
data may be too small to extrapolate to other organics in the list of
underlying hazardous constituents that must meet treatment standards;
(2) for organic constituents, many of the treatment test results
examined by EPA involved mostly combustion rather than non-combustion
technologies; (3) for soils with multiple hazardous constituents and
other complex soil matrices, the soil treatment standards could only be
met via incineration; and, (4) EPA should not pool data from bench,
pilot, and full scale treatment applications. For the most part, these
commenters suggested that EPA either exempt hazardous contaminated soil
entirely from a duty to comply with land disposal restriction treatment
standards or, if hazardous contaminated soil were to remain subject to
LDRs, allow risk-based treatment standards to be developed entirely on
a site-by-site basis pursuant to state oversight.
EPA closely considered these comments and carefully re-evaluated
the data from the soil treatment database as well as other data from
more recent sources. These evaluations are summarized in the background
documents for today's final rule. EPA is not, at this time, taking
action to categorically exempt large volumes of hazardous remediation
waste (including contaminated soil) from RCRA hazardous waste
management requirements and, therefore, the issue of achievability of
today's soil treatment standards is germane.
Notwithstanding the treatment results described in this section
below, which support the achievability of today's soil treatment
standards, EPA realizes that national, technology-based treatment
standards are sometimes not achievable because of site- and waste-
specific characteristics. Thus, EPA has long provided for treatment
variances under these circumstances (see 40 CFR 268.44). In addition,
because EPA and authorized states are in a position during remediation
to make site-specific risk-based minimize threat determinations, the
Agency is also adopting in today's rule a new type of variance for
contaminated soils. This variance can be granted if, on a case-by-case
basis, it is determined that the technology-based treatment standard
[[Page 28612]]
would prompt treatment beyond the point at which threats are minimized.
Fundamentally, EPA agrees with many commenters that today's land
disposal treatment standards for contaminated soil may not remove all
of the barriers RCRA can impose on efficient and aggressive site
remediation. As discussed earlier in today's preamble, the Agency hopes
the application of RCRA Subtitle C requirements to remediation of
contaminated soils and other wastes will be addressed through
legislation. If there is no legislative action, EPA may choose to take
additional regulatory action, which may include either a re-examination
of the application of LDRs to contaminated soil or other remediation
wastes or a re-evaluation of today's soil treatment standards, or both.
In the meantime, today's rule represents a significant improvement over
the current practice of applying the treatment standards developed for
pure industrial hazardous waste to contaminated soil.
b. Analysis of Data from the Soil Treatment Database. The soil
treatment standards promulgated today are based EPA's Soil Treatment
Database (SDB). See, Best Demonstrated Available Treatment Background
Document for Hazardous Soils (August 1993); LDR Phase 2 proposal (58 FR
48122, Sept. 14, 1993); and Soil Treatability Analysis: Analysis of
Treatability Data for Contaminated Soil Treatment Technologies (April
1998, USEPA) (hereinafter, this document is referred to as the ``Soil
Treatability Analysis Report''). General concerns about the soil
treatment database (and in particular, concerns about achieving the 10
times UTS or 90% reduction standard) are addressed here. Results of our
analysis of the soil treatment database data on treatment performance
for various technologies are shown in Table 1 below. Results of
additional analysis for various organic and metal contaminant groups
are shown in Tables 2-5 below. Further details of the analysis and
additional findings are contained in the technical background documents
in this docket.
Table 1.--Summary of Treatment Results per Technology in Soil Data Base \24\
--------------------------------------------------------------------------------------------------------------------------------------------------------
Untreated Treated
-----------------------------------------------------------------------------------------
Total paired Data points Data points Data points Data Points
Treatment technology data points in Data points meeting 10 times meeting 90% meeting both 10 failing both 10
the soil data meeting 10 times UTS but not 90% reduction but times UTS and times UTS and
base UTS standard reduction not 10 times UTS 90% reduction 90% reduction
standard standard standards standards
--------------------------------------------------------------------------------------------------------------------------------------------------------
Biological Treatment........................ 250 86 176 168 109 15
Chemical Treatment.......................... 242 58 226 206 200 10
Dechlorination.............................. 154 53 134 100 84 4
Stabilization............................... 269 140 250 239 232 12
Stripping................................... 236 88 206 103 103 30
Washing..................................... 35 10 21 14 11 11
Thermal Desorption.......................... 957 338 833 759 692 57
-----------------------------------------------------------------------------------------------------------
Total................................... 2143 \25\ 773 1846 1589 1431 139
--------------------------------------------------------------------------------------------------------------------------------------------------------
In aggregate, the results on Table 1 indicate that the Agency's
selection of standards are within the range of reasonable values for
non-combustion technologies to achieve. These data show that 139 (or
6%) paired data points out of 2143 would fail to meet the 10 times UTS
or 90% reduction standard. Among possible reasons for these treatment
performance deviations are that some soil samples represent cases in
which the selected technology was not appropriate for the range of
hazardous constituents in an organic chemical admixture. A better
selection of treatment technology may include either a more aggressive
non-combustion technology or may involve use of two or more technology
trains in order to meet the soil treatment standards. It is common
practice to employ multiple treatment trains at facilities that have
complex chemical mixtures or soil textures at a site. As further
explained in succeeding sections of this preamble and in various
background documents, EPA believes that the hazardous soil treatment
standards promulgated today are within a regime of reasonable treatment
levels normally achieved by non-combustion technologies. See, e.g.,
Soil Treatability Analysis Report and Extrapolation of Treatment
Performance Data in the Soil Data Base Among Hazardous Constituents in
Contaminated Soils (April 1998, USEPA).
---------------------------------------------------------------------------
\24\ For discussion of these treatment data, see Soil
Treatability Analysis Report, and Extrapolation of Treatment
Performance Data in the Soil Data Base Among Hazardous Constituents
in Contaminated Soils (April 1998, USEPA).
\25\ As noted earlier, EPA examined in detail up to 2,541 pairs
of data points in total, and the number of non-combustion data pairs
examined is 2,143.
---------------------------------------------------------------------------
(1) Concerns About Presence of Data from Incineration and
Extrapolation of Data to Other Constituents. As mentioned earlier, EPA
has segregated the available treatment data (2,541 paired data points)
so that we can better examine the 2,143 paired data points describing
the treatment of hazardous soils by non-combustion technologies.
Although 50 organic constituents in the original 2,541 paired data
points were treated by combustion (i.e., incineration), only 13 of
these 50 organics were treated exclusively by combustion. These 13
hazardous constituents are: 1,2,4-trichloro-benzene; p,p'-DDD; p,p'DDE;
2,4-dichlorophenol; methoxychlor; 2,4,6-trichlorophenol; 2,4,5-
trichlorophenol; carbon tetrachloride; chloroform; hexachloroethane;
1,2-dibromo-3-chloro-propane; isodrin; and gamma-BHC. None of the data
describing combustion of these 13 constituents or the other 37 organics
(for which there are some combustion results) were relied upon in
assessing achievability of today's hazardous soil treatment limits.
With respect to commenters' concerns about extrapolating the SDB
data to organic and inorganic constituents that will need to be
treated, EPA analyzed the various non-combustion technologies and their
average treatment efficiencies against various chemical clusters and
chemical functional groups of hazardous constituents. See: (1)
Extrapolation of Treatment Performance Data in the Soil Data Base Among
Hazardous Constituents in Contaminated Soils (April 1998, USEPA); (2)
Derivation of Treatment Achievability Results of Organic Functional
Groups and Types of Compounds (April 1998, USEPA); (3) Soil
Treatability Analysis Report (USEPA, 1998); and (4) Additional
[[Page 28613]]
Information on Treatability of Contaminated Soils as Discussed in
Section VII.B.8. of the Final Rule Preamble (April 1998, USEPA).
The results are summarized in Tables 2-5 below. These results show
that non-combustion technologies can achieve today's soil treatment
standards. 93.5% (2,004 of the 2,143 data pairs ) of the treatment test
results meet the 10 times UTS or 90% reduction standard. Furthermore,
non-combustion technologies can meet the soil treatment standards even
in cases when soils contain elevated levels of harder-to-treat organic
hazardous constituents, such as dioxins and furans, polychlorinated
biphenyls (PCBs), and polynuclear aromatics (PNAs). See Appendix D in
Soil Treatability Analysis Report.
As noted earlier, available data on the performance of non-
combustion technologies treating organics also show that some
technologies are more effective with certain organics within specific
families or chemical functional groups, e.g., organic treatment
technologies removing volatile organics from the soils and
dechlorination removing halogenated organics. Treatability tests at
certain complex sites corroborate these findings of achievability from
the SDB.
Regarding organics, at the Ninth Avenue Dump Site in Indiana,
hazardous soils were contaminated with low to moderate concentrations
of PNAs, aromatics, chlorinated aliphatics, and phthalates. Untreated
constituents showed concentrations that were about the same or up to
two orders of magnitude higher than today's soil treatment
standards.26 Among the volatiles were toluene (1,100 ppm),
total xylene (2,100 ppm), ethylbenzene ( 420 ppm), 1,1,1-
trichloroethane (120 ppm), trichloroethene (93 ppm), tetrachloroethene
(380 ppm), 1,1-dichloroethane (81 ppm), and methylene chloride (800
ppm). The following semivolatile organics-PNAs (and their highest
concentration) were phenanthrene (92 ppm) and naphthalene (84 ppm).
Bis(2-ethylhexyl) phthalate, a semivolatile phthalate, was reported at
110 ppm. The soil particle distribution of the contaminated soil was
not quantified, but the soil was reported as comprised primarily of
sand and silt. Biotreatment achieved the following average treatment
reduction efficiencies:
---------------------------------------------------------------------------
\26\ The following constituents were present at levels below the
soil treatment standards; fluorene, fluoranthene, pyrene,
acenaphthalene, benzo(a)anthracene, chrysene, di-n-butyl phthalate,
and diphenylnitrosamine.
---------------------------------------------------------------------------
Volatile chlorinated aliphatics--99.9%;
Ethylbenzene--100%;
Volatile aromatics--99.9%;
Semivolatile PNAs--97.4%;
Bis(2-ethylhexyl)phthalate--93.2%.
Regarding complex metal remediations, the full-scale stabilization
study conducted at the Portable Equipment Salvage Company, a
transformer and metal salvage operation in Oregon, involved untreated
levels of lead up to 880 mg/l (TCLP) and zinc up to 71 mg/l (TCLP).
Organics were also present--the highest sample showing 610 mg/l lead
(TCLP), 14,000 ppm oil and grease, 41,000 ppm total organic carbon, and
7.1 pH. The facility conducted treatability studies on three soil
textures found at the site: (1) sandy loam, (2) loamy sand, and (3)
loam. The stabilized sandy loam sample showed a concentration of 0.5
ppm lead, a 99.72% reduction efficiency. The facility also treated two
samples of loamy sand, one to 47 mg/l lead (TCLP) (a 93.65% reduction
efficiency ) and the other to 2.5 mg/l lead (TCLP) (a 99.72% reduction
efficiency ). The treated loam sample showed 0.10 mg/l lead, a 99.97%
reduction.
More information underlying EPA's rationale for extrapolating the
available treatment performance data to other organic and inorganic
hazardous constituents regulated under the land disposal restrictions
can be found in the RCRA Docket for this rule (see Appendix D in Soil
Treatability Analysis Report) and memorandum to docket on extrapolation
of treatment performance data among different hazardous constituents.
Finally, we note that even though there were treatment data on
soils containing cyanide in the larger data base (6,394 paired data
points), none of the retained 2,541 or 2,143 paired data points
included treatment data on cyanide. However, the current UTS for
cyanide is based on the performance of alkaline dechlorination, a non-
combustion technology. Cyanides can form complexes with metals and
organics and, therefore, technologies capable of removing both organic
and metals are also able to remove cyanide from contaminated soils. As
a result, it is reasonable to expect that the average treatment
performance attained by treating organics in soils will also be
achieved for cyanide-bearing contaminated soils. We note that, for
example, 90% reduction can be achieved based on the performance
efficiency that thermal desorption attained in removing PNA's (with
more than five rings) and chlorinated organics from contaminated soil.
These constituents are among the hardest chemical species to remove via
thermal desorption. For these reasons, the Agency has concluded that
today's soil treatment standard for cyanide can be achieved by a non-
combustion technology as well.
(2) Technology Scale and Soil Variability Issues. As noted earlier,
several commenters objected to EPA's pooling of treatment data from
pilot, bench, and full scale processes, and urged EPA to consider only
performance data from full-scale field studies characterizing the
treatment of soil volumes. EPA prefers, generally, to rely on full
scale studies for the purpose of developing and promulgating treatment
standards, and this is true with respect to the soil treatment
standards as well. However, in this case as well as in many prior LDR
treatment standard efforts, EPA's data base includes more than just
full scale data upon which EPA can properly rely. Bench and pilot scale
technologies can be appropriately considered by EPA (and EPA has
historically done so) in setting treatment limits as long as full scale
operations of the treatment system under consideration exist or have
been demonstrated on wastes/soils. Except for hydrolysis,27
the technologies in the SDB are demonstrated full scale, and the
administrative docket contains bench, pilot, and full scale studies
that reflect the Agency's field experiences at contaminated sites.
---------------------------------------------------------------------------
\27\ Hydrolysis can be of normal occurrence or intentionally
induced at hazardous waste sites. EPA does not have full-scale ex-
situ demonstration studies on this technology but considers the data
in the SDB to be indicative of what levels can be achieved.
---------------------------------------------------------------------------
Furthermore, in this rulemaking, given the variability of hazardous
soils (in terms of types, concentrations and numbers of hazardous
constituents and soil matrices), plus the special policy considerations
associated with remediations, the Agency is adopting treatment
standards from the zone of reasonable values that could be permissibly
selected based upon the treatment performance data. Thus, the data are
not being used so much to establish a precise performance level as to
confirm the typical achievability of the promulgated standards, i.e.,
ten times UTS or 90% reduction.
With respect to the SDB and commenters' concerns about the impact
of soil variability on achievability of the soil treatment standards by
non-combustion technologies, EPA collected 6,394 pairs of data point
describing the treatment of various hazardous soils.
[[Page 28614]]
The retained 2,143 non-combustion paired data points are reasonably
sufficient to adequately describe the treatment of metal, organics, and
multiple metal and organic contaminants that are frequently found at
different type of sites, including both Superfund and RCRA sites. For
instance, the SDB has treatment data on soils with varying textures
including top soils, silty/loam soils, and clay soils. For the 14
different soil type groupings analyzed, only 139 out of 2,143 data
pairs (about 6.5%) would not meet today's soil treatment standards (see
Appendices C and D in Soil Treatability Analysis Report).
With respect to these 6.5% data pairs, several potential reasons
exist to explain why 90 % reduction or 10 times UTS level might not
have been achieved. First, the treatment study objectives may not
primarily have been to test whether these standards could be met. For
example, the treatment study may have been designed either to assess
the feasibility of using a particular (but not necessarily optimum)
technology on a particular contaminated soil, or to meet a prescribed
risk-based level under a RCRA or CERCLA site remediation plan.
Second, a treatment technology may have been applied to soils
contaminated with multiple hazardous constituents where the technology
may have been inappropriate for a subset of those contaminants (and for
which data were reported anyway). For example, air stripping is a
technology that operates best on volatile organics within a given range
of Henry constant values. In contrast, air stripping of semivolatile
organics and metals is expected to be much poorer. (In this type of
situation, a technology amendment or treatment train may be
appropriate, i.e., air stripping may be improved if steam stripping is
applied first to enhance the pool of semivolatiles that can respond to
the physical separation treatment process.)
Third, these treatment data likely include instances when a
treatment technology encountered soil heterogeneities that resulted in
undertreatment of portions of the soil. For instance, during the clean
up of contaminated debris and soils, detailed sampling protocols are
typically developed to ensure that desired treatment constituent
concentrations are met because of the deleterious impact of
heterogeneous soil strata and the presence of debris on treatment
technology performance. Re-processing can often be required to comply
with the applicable treatment standards. Another alternative is to
optimize specific technology operating parameters that can enhance the
ability of the technology to meet the prescribed treatment limits.
Optimization can involve: (1) feeding the correct soil/debris particle
size fractions to the treatment system, (2) creating more turbulence
between soil and gaseous/liquid treatment fluids, (3) using a greater-
than-normal amount of chemical agents, (4) operating at the higher end
of an operating temperature range, (5) adjusting the pH of the soil,
(6) adding adequate pre-/post-treatment steps that address specific
contaminants that may be expected to receive sub-optimal treatment, or
(7) allowing longer residence time in the treatment unit.
It is not possible to determine precisely how many of these
techniques were used in the 139 instances that failed the 90% reduction
or 10 times UTS levels. However, EPA expects that not all optimization
measures were used since the operators of the treatment technologies
did not have as their primary objective the attainment of these
particular levels, which are being adopted today as the soil treatment
standard. On balance, the weight of evidence and analysis from the SDB
are believed to reasonably indicate that today's standards are
achievable for soils that may exhibit variability, particularly if
optimization techniques or treatment technology trains are fully
considered. Of course, should an unusual situation present itself in
which these measures are not successful, a treatment variance can be
sought under 40 CFR 268.44(h) or under the risk-based variance
provisions being adopted in today's rule.
Furthermore, EPA has a number of bench and pilot studies on the
treatment of contaminated soils from wood preserving, petroleum
refining, and electroplating sites, which contain a wide range of
constituents such as polynuclear aromatic, phenolic, chlorinated
organics, spent solvents, creosote, and metals. It is reasonable to
expect that these treatment results, showing achievability, also lend
support to the conclusion that treatment at other RCRA and Superfund
sites, containing these types of complex contaminant and soil
variability scenarios, can be expected to achieve today's soil
treatment standards.28 See also Chapter 4 in Soil
Treatability Analysis Report.
---------------------------------------------------------------------------
\28\ See (1) Remediation Case Studies: Bioremediation and
Vitrification, July 1997, EPA 542-R-97-008 or PB97-177554; (2)
Remediation Case Studies: Soil Vapor Extraction and Other In Situ
Technologies, July 1997, EPA 542-R-97-009 or NTIS PB97-177562; (3)
Analysis of Selected Enhancements for Soil Vapor Extraction,
September 1997, EPA-542-R-97-007; (4) Remedial Case Studies: Thermal
Desorption, Soil Washing, and In Situ Vitrification, March 1995, EPA
542-R-95-005 or NITS PB95-182945; (5) Remediation Case Studies: Soil
Vapor Extraction, March 1995, EPA 542-4-95-004 or NTIS PB95-182937;
and (6) Remediation case Studies: Bioremediation, March 1995, EPA
542-R-95-002 or NTIS PB95-182911.
---------------------------------------------------------------------------
Pooled bench, pilot, and full scale data in the SDB are expected to
depict what the various treatment technologies can achieve for other
hazardous soils managed under CERCLA and RCRA. As noted earlier, non-
combustion technologies will behave better on a given range or class of
organic and metal constituents. A given range of soil characteristics
that may inhibit treatment performance can be amended to facilitate the
treatment of hazardous soils. Available information on other full scale
operations of the tested technologies demonstrate that optimization
techniques can be used to overcome potential soil interferences and
thus attain, generally, treatment design objectives. Hence, it is
important to carefully evaluate the characteristics of each site
against the expected capabilities of various non-combustion
technologies, which are summarized below.
(3) Performance Data for Organic Constituents. EPA's conclusions
with respect to achievability of soil treatment standards for organics
in hazardous soils are based on the performance of biological
treatment, chemical extraction, dechlorination, soil washing, thermal
desorption, and soil vapor extraction. Other treatment technologies
capable of achieving the treatment limits (such as combustion) are not
prohibited except for those that may constitute impermissible dilution.
Tables 2 and 3 below provide an overview of the number of data points
and the average treatment efficiency ranges that each of the technology
categories achieved. Also, each Table below reports the range of test
scales as well as the available treatment performance data per major
chemical family category/cluster assigned to chemical constituents in
the BDAT List. (For the whole list of BDAT constituents and their
classification, see Appendix B in the BDAT Background Document for
Hazardous Soils, August 1993.) Further details and discussion on the
results for major chemical family categories/clusters is contained in
the docket.
[[Page 28615]]
Table 2.--Summary of Nonthermal Treatment Performance Data on Groups of Organic Hazardous Constituents \29\
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Biotreatment scale: 0.01 kg Chemical extraction scale: Dechlorination scale: 0.1 kg Soil washing scale: 0.08-204 Hydrolysis scale: 0.1 kg to
to 1,250,000 kg 0.0075 kg to 37,000 kg to 127,913 kg kg 2.75 kg
BDAT organic cluster -------------------------------------------------------------------------------------------------------------------------------------------------------------
Data Average removal Data Average removal Data Average removal Data Average removal Data Average removal
points efficiency points efficiency points efficiency points efficiency points efficiency
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Volatiles......................... 48 >99%.................. 9 >99%.................. 13 96.3 to 99.3%......... None None................. None None
Semivolatiles..................... 185 55-98.2% \30\......... 163 62-98.8%.............. 2 99.8%................. 13 81.8-97.2%........... None None
Organochlorine.................... 12 16.7--70.2%........... None None.................. 13 >95.2%................ None None................. 2 67.9-91.7%
Phenoxyacetic Acid Pesticides..... None None.................. None None.................. 9 98.6-99.0%............ None None................. None None
Organo Phosphorous insecticides None None.................. None None.................. None None.................. None None................. None None
\31\.
Polychlorinated Biphenyls......... None None.................. 52 71.5%-99.9%........... 69 68.8-97.1%............ 1 88.5% \32\........... None None
Dioxins and Furans................ None None.................. 12 40->97%............... 48 73.7->99.8%........... 7 84.8%................ None None
-------- -------- -------- -------- --------
Total Number of Data Points... 245 ...................... 236 ...................... 154 ...................... 21 ..................... 2
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Table 3.--Summary of Thermal Performance Data on Groups of Organic Hazardous Constituents 33
----------------------------------------------------------------------------------------------------------------
Thermal desorption 34 scale: 21.6 kg to 3,823,000 Soil vapor extraction scale:
kg 4.5 kg to >1,000 kg
----------------------------------------------------------------------------------
BDAT organic cluster Average
Data points Average removal efficiency Data points removal
efficiency
----------------------------------------------------------------------------------------------------------------
Volatiles.................... 293 79.2-99.9%........................ 189 44-99.2%
Semivolatiles 35............. 614 50-99.4%.......................... 47 0-57.2%
Organochlorines.............. 12 88.5-98.8%........................ None None
Phenoxyacetic Acid Pesticides None None.............................. None None
Organo Phosphorous None None.............................. None None
insecticides 36.
Polychlorinated Biphenyls.... 1 87.5%............................. None None
Dioxins and Furans........... 37 85.6-97.6%........................ None None
---------------- ----------------
Total Number of Data 957 .................................. 236
Points.
----------------------------------------------------------------------------------------------------------------
As shown on Tables 2 and 3, EPA lacks performance data for the
thermal or non-thermal treatment of four organic constituents
classified in the BDAT list as organophosphorous insecticides. These
four constituents are disulfoton, famphur, methyl parathion, and
phorate. However, we can determine achievability for these four organic
constituents based upon the transfer of treatment data for other,
similarly difficult to treat organics. Because of structural and
chemical similarities, these four organophosphorous compounds are
expected to behave similarly during treatment to other polar
nonhalogenated phenols, phenyl ethers, and cresols. Thus, EPA believes
that these four organophosphorus compounds can be treated by the same
technologies as other polar nonhalogenated organic compounds, for which
EPA has data. Therefore, based on the available data for polar
nonhalogenated compounds, EPA concludes that the treatment standards
for soils contaminated with these four organophosphorous compounds can
be achieved by biodegradation, chemical extraction, and thermal
desorption (semivolatiles).
---------------------------------------------------------------------------
\29\ For a discussion of these treatment data, see the Soil
Treatment Achievability Report; Extrapolation of Treatment
Performance Data in the Soil Data Base Among Hazardous Constituents
in Contaminated Soils (April 1998, USEPA); and the Additional
Information on Treatability of Contaminated Soils as Discussed in
Section VII.B.8. of Phase IV Final Rule Preamble, (April 1998,
USEPA). These documents indicate the numbers and types of data pairs
that meet the 10 times UTS level, both prior to treatment and after
the treatment described in the table.
\30\ Cyclical hydrocarbons with more than five rings undergo
lower reduction efficiencies.
\31\ EPA is transferring the available performance data from the
chemical extraction and the biological treatment of (semivolatile)
polar nonhalogenated organics in the hazardous solid treatment data
base. Thus, the columns are intentionally left blank.
\32\ Only one test was performed.
\33\ For a discussion of these treatment data, see the Soil
Treatment Achievability Report; Extrapolation of Treatment
Performance Data in the Soil Data Base Among Hazardous Constituents
in Contaminated Soils (April 1998, USEPA) and the Additional
Information on Treatability of Contaminated Soils as Discussed in
Section VII.B.8. of Phase IV Final Rule Preamble, (April 1998,
USEPA). These documents indicate the numbers and types of data pairs
that meet the 10 times UTS level, both prior to treatment and after
the treatment described in the table.
\34\ The term thermal desorption, as used in this table, is a
general description of various thermal techniques. No conclusion may
be drawn about the regulatory status or classification of a
particular thermal desorber from the inclusion of treatment data
from that device in this column.
\35\ The performance of combustion and soil vapor extraction is
less effective in treating semivolatile organics that contain
aromatic and heterocyclical structures. The same is true for and
nonvolatile chlorinated organics.
\36\ EPA is transferring the available performance data from the
chemical extraction and the biological treatment of (semivolatile)
polar nonhalogenated organics in the hazardous soil treatment data
base.
---------------------------------------------------------------------------
(4) Other Indicia of Achievability for Organic Constituents
EPA also re-analyzed certain portions of the SDB with regard to
ability of various technologies to meet today's soil treatment
standards by looking more closely at organic treatability groups based
on the structural features of the hazardous constituents of concern.
The results of this analysis, presented in Table 4 below, corroborate
those in Tables 1-3 and EPA's conclusion that the soil treatment
standards--ten times UTS or 90% reduction--are within the zone of
reasonable values that could have been selected. For further
information on the derivation of Table 4, see the background document
entitled ``Derivation of Treatment Achievability Results for Organic
Functional Groups and Types of Compounds.''
[[Page 28616]]
Table 4.--Treatment Efficiency--Percent Reduction Ranges by Technology for Various Functional Groupings
[Average percent reduction in brackets; number of data points analyzed in parentheses] \37\
--------------------------------------------------------------------------------------------------------------------------------------------------------
Biological Chemical Thermal Other
Treatability group treatment extraction Dechlorination desorption Soil washing technologies
-------------------------------------------------------------------------------------------------------------\38\-----------------------------\39\------
Halogenated Nonpolar Aromatics........................ 52.05-99.97
[76.01]
(2) 80.42
[80.42]
(1) 99.05-100
[99.53]
(2) 29.19-100
[95.31]
(29) 66.21-95.6
[85.41]
(4) 30.13--49.68
[42.41]
(3)
Dioxins, Furans, PCBs, and Precursors................. none 14.88-99.97
[90.13]
(40) 91.66-99.88
[97.94]
(20) 98.9-100
[99.57]
(17) none none
Halogenated Phenols, Cresols, and Other Polar
Aromatics............................................ 45.1-95.14
[81.05]
(5) 63.83-93.18
[79.46]
(3) none 2.71-99.93
[56.21]
(15) 6.25-99.06
[73.71]
(6) 96.21
[96.21]
(1)
Halogenated Aliphatics................................ 99.87-99.99
[99.91]
(3) 86.62-94.81
[91.09]
(3) 89.06-100
[97.54]
(7) 36.88-100
[96.49]
(80) 58.68-99.4
[90.58]
(9) 72-99.68
[95.66]
(6)
Halogenated Cyclic Aliphatics, Ethers, Esters, and
Ketones.............................................. 9.76-99.77
[60.99]
(8) none none none none none
Nitrated Aromatics and Aliphatics..................... none none none none none none
Simple Nonpolar Aromatics and Heterocyclics........... 99.97-100
[100]
(10) 77.41-99.92
[90.77]
(6) 96.39-100
[98.61]
(10) 22.68-100
[94.3]
(158) 47.74-99.91
[82.39]
(14) 97.7
[97.7]
(1)
Polynuclear Aromatic Hydrocarbons..................... 5.13-99.85
[67.15]
(75) 51.55-99.98
[95.72]
(125) 10.92-97.42
[67.47]
(3) 10.14-100
[94.19]
(301) 81.83-92.19
[85.74]
(3) 95.9-99.55
[97.73]
(2)
Other Nonhalogenated Polar Organics................... none 75.96-99.82
[98.35]
(28) 90.81-99.89
[95.13]
(10) 2.6-99.98
[82.04]
(36) 51.07-99.97
[88.67]
(10) 94.59-99.89
[97.24]
(2)
--------------------------------------------------------------------------------------------------------------------------------------------------------
(5) Performance Data for Metal Contaminants
Performance data for metals contaminants are based on the
performance of stabilization and chemical extraction (mercury) of soils
contaminated with metals. Other metal treatment technologies are not
prohibited (except if impermissible dilution were to occur). The
results of EPA's analysis of the data on treatment of metals in soils
are summarized in Table 5 below.
Table 5.--Summary of Performance Data for Hazardous Metals Constituents \40\
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Stabilization scale: bench, pilot, and full scale Chemical extraction scale: pilot Soil washing scale: bench & pilot
BDAT metals cluster -----------------------------------------------------------------------------------------------------------------------------------------------------------
Data Points Average removal efficiency Data points Average removal efficiency Data points Average removal efficiency
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Metals.............................. 269 91.1-99.8%........................ 4 97.7% \41\........................ 14 17.9-97.2%
---------------- ---------------- ----------------
Total........................... 269 .................................. 4 .................................. 14
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The results in Table 5 corroborate EPA's conclusion that the soil
treatment standards--ten times UTS or 90% reduction--are within the
zone of reasonable values that could have been selected. For further
information on the derivation of Table 5, see Soil Treatability
Analysis Report.
---------------------------------------------------------------------------
\37\ Table based on data from ``Delivery of Graphs and Data
Tables Showing Corrected Treated Concentrations vs. Data Point
Number Index for Selected Constituents,'' February 19, 1992
(Administrative Record of the proposed LDR Phase 2 rules as F-93-
CS2P-S0597). See also (1) Derivation of Treatment Achievability
Results for Organic Functional Groups and Types of Compounds, April
1998 (USEPA); (2) Additional Information on Treatability of
Contaminated Soils as Discussed in Section VII.B.8. of Phase IV
Final Rule Preamble, (April 1998, USEPA); (3) Extrapolation of
Treatment Performance Data in the Soil Data Base Among Hazardous
Constituents in Contaminated Soils (April 1998, USEPA); and (3) Soil
Treatability Analysis Report (April 1998, USEPA). These documents
indicate the numbers and types of data pairs that meet the 10 times
UTS level, both prior to treatment and after the treatment described
in the table.
\38\ The term thermal desorption, as used in this table, is a
general description of various thermal techniques. No conclusion may
be drawn about the regulatory status or classification of a
particular thermal desorber from the inclusion of treatment data
from that device in this column.
\39\ These include air stripping, photolysis, and treatment
trains.
\40\ For a discussion of these treatment data, see the Soil
Treatment Achievability Report; Extrapolation of Treatment
Performance Data in the Soil Data Base Among Hazardous Constituents
in Contaminated Soils (April 1998, USEPA); and the Additional
Information on Treatability of Contaminated Soils as Discussed in
Section VII.B.8 of Phase IV Final Rule Preamble, (April 1998,
USEPA). These documents indicate the numbers and types of data pairs
that meet the 10 times UTS level, both prior to treatment and after
the treatment described in the table.
\41\ Available data are exclusively for the treatment of mercury
on soils.
---------------------------------------------------------------------------
With respect to multiple metal constituents or organometallic
constituents in a contaminated soil, we
[[Page 28617]]
recognize that a situation may call for two or more treatment
technology trains to achieve the treatment standards promulgated today
(e.g., one treatment for organics and another for metals). This must
include proper consideration of the order in which various treatment
processes should be applied to the contaminated soil so that treatment
effectiveness is optimized. However, if these considerations have been
properly made and the required treatment standards are not being met
because, for example, of unique soil matrices or difficult to treat
sites, then we expect that entities may elect to seek a treatment
variance pursuant to 40 CFR 268.44(h) or a risk-based soil treatment
variance, which is being adopted in today's rule.
c. Data Submitted by Commenters
At least four commenters submitted treatment data from studies
describing the performance of innovative and conventional treatment
technologies on hazardous soils. DuPont submitted bench, pilot, and
full scale treatment data from various vendors describing the operation
of soil washing. DuPont asserts these data supports the viability of
soil washing as an innovative technology for hazardous soils.
The Environmental Technology Council (formerly the Hazardous Waste
Treatment Council) submitted full, pilot, and bench scale treatment
data from various vendors of innovative treatment technologies and
provided an extensive review of EPA's soil treatment data base. See
document entitled, Evaluation of Proposed BDAT Soil and Process
Treatment Technologies--Report to the Hazardous Waste Treatment
Council, November 1993 (filed as document number CS2P00060.E in Docket
No. F-92-CS2P-FFFFF). Based on the ETC's technical report and the
subsequent comments of the ETC to the HWIR-Media rule (see comments
from the Environmental Technology Council, filed as comment number MHWP
00088 in Docket No. F-92-CS2P-FFFFF), the ETC believes that today's
treatment standards for hazardous soils are achievable using thermal
treatment. Although the ETC report stated that EPA may lack full-scale
treatment data for several innovative or alternative technologies, the
ETC data support EPA's view that the many full scale operations of non-
combustion technologies demonstrated in the field were sufficient to
support a view that the soil treatment standards were achievable.
Further, the ETC pointed to various examples of how various non-
combustion treatment technologies can be better optimized. EPA concurs
with many of those observations on how non-combustion technologies can
be optimized.
Two other commenters submitted data in the Phase 2 rule regarding
the performance of non-combustion technologies--USPCI and Sierra
Environmental Services. USPCI's performance data describe the treatment
of polynuclear organics in soils via chemical oxidation followed by
stabilization. These data were determined to be insufficient to support
a broad national determination that stabilization of organics can be
considered BDAT for organics. However, use of organic stabilization
may, in some situations, be a permissible treatment option since the
LDRs do not specifically prohibit the use of stabilization or
solidification to treat nonwastewaters containing hazardous organic
constituents. See Response to Comment Document, Comment from Chemical
Waste Management, Inc. (No. PH4P-00048). There are, however, specific
circumstances in which stabilization or solidification would be
considered impermissible dilution. We expect that, for these types of
situations to be properly evaluated, it will be necessary to petition
for a treatment variance under 40 CFR 268.44(h) or under the provisions
for a risk-based soil treatment variance being adopted in today's rule.
The Agency also is currently considering whether, in the near future,
to issue guidance on when stabilization or solidification of organic-
bearing waste is appropriate and when it may constitute impermissible
dilution.
Sierra Environmental Services submitted performance data regarding
the treatment of carcinogenic polyaromatic hydrocarbons (cPAH) via
bioremediation. These data are based on in-situ treatment of a 7.5 acre
lagoon which was divided into two cells. Although the facility
remediated 35 volatile, 65 semivolatile organics, PCBs, and pesticides,
the facility only submitted data describing the treatment of major
PAHs. Based on the performance of the biotreatment process applied to
this site, the commenter argued the proposed treatment standards, if
promulgated as proposed, would eliminate biotreatment as an alternative
at this facility. EPA disagrees. Remediation processes that are applied
in-situ do not trigger land disposal restrictions. If the facility were
biotreating the lagoon sludges ex-situ, EPA concurs that the facility
may be unable to land dispose the treated lagoon sludges. We also note
that, under the existing regulations and regulations being adopted
today, the commenter may be able to avail itself of a treatment
variance, depending on the site-specific circumstances involved.
9. Applicability of Soil Treatment Standards and Readability of Final
Regulations
Many commenters asserted that the proposed regulations governing
applicability of LDRs to contaminated soil were difficult to understand
and apply. EPA was persuaded by these comments and has reformatted the
applicability regulations into an easier-to-read table. The Agency
recognizes that determining whether or not LDRs apply to any given
volume of contaminated soil can be complicated. To further assist
program implementors and facility owners/operators, we will review and
discuss the principles that govern LDR applicability for contaminated
soil in this section of today's preamble.
The following principles informed EPA's decisions concerning
application of LDRs to contaminated soils.
First principle: land disposal restrictions only attach to
prohibited hazardous waste (or hazardous contaminated soil) when it is
(1) generated and (2) placed in a land disposal unit.42
Therefore, if contaminated soil is not removed from the land (i.e.,
generated), LDRs cannot apply. Similarly, if contaminated soil is
removed from the land (i.e., generated) yet never placed in a land
disposal unit, LDRs cannot apply.43 In other words, LDRs do
not apply to contaminated soil in situ or force excavation of
contaminated soil. If soils are excavated, however, LDRs may apply, as
discussed below.
---------------------------------------------------------------------------
\42\ As discussed earlier in today's final rule, all hazardous
wastes that were listed or identified at the time of the 1984
Hazardous and Solid Waste Amendments to RCRA have been prohibited
from land disposal. EPA is required to prohibit hazardous wastes
listed or identified after 1984 within six months of the wastes'
listing or identification. RCRA Section 3004(g)(4). A table in 40
CFR Part 268 Appendix VII. outlines the dates of LDR applicablity
for hazardous wastes.
\43\ Note that, as discussed later in today's preamble, nothing
in today's final rule affects implementation of the existing ``area
of contamination'' policy. Therefore, soil managed within areas of
contamination, even if it is ``removed from the land'' within such
an area, would not be considered to be ``generated.'' See the
discussion of the area of contamination policy later in today's
preamble.
---------------------------------------------------------------------------
Second principle: once a decision has been made to generate and re-
land-dispose contaminated soils, LDRs generally only apply to
contaminated soils that contain hazardous waste. The Agency considers
soil to contain hazardous waste: (1) when it exhibits a
[[Page 28618]]
characteristic of hazardous waste; and, (2) when it is contaminated by
certain concentrations of constituents from listed hazardous waste. The
contained-in policy is discussed in Section VII.E of today's preamble.
Third principle: once LDRs attach (generally, at the point of
generation, see principle (1)) to any given hazardous waste or volume
of hazardous contaminated soil, the LDR treatment standards continue to
apply until they are met. This principle comes from application of the
logic of the Chemical Waste opinion. In that opinion, the D.C. Circuit
held that land disposal prohibitions attach at the point that a
hazardous waste is generated and continue to apply until threats posed
by land disposal of the waste are minimized. Chemical Waste Management
v. EPA, 976 F.2d at 13, 14 and 24. In illustration of this principle,
the court held that (in the case of characteristic hazardous waste)
elimination of the property that caused EPA to identify a waste as
hazardous in the first instance does not automatically eliminate the
duty to achieve compliance with LDRs. As discussed later in this
section of today's preamble, EPA has determined that, although the
Chemical Waste opinion did not address contaminated soils per se, it is
prudent to apply the logic of the Chemical Waste opinion to
contaminated soils.
Using these principles, EPA created the regulations and table that
govern application of LDRs to contaminated soils, as discussed below.
The regulations that address application of LDRs to soil that
exhibits a characteristic of hazardous waste are relatively
straightforward. Soil that exhibits a characteristic of hazardous waste
when it is generated is subject to LDRs and must be treated to meet LDR
treatment standards prior to land disposal. EPA's conclusion that soil
that exhibits a characteristic of hazardous waste must be treated to
meet LDRs prior to land disposal derives from a simple application of
the principles above. First, LDRs have the opportunity to attach to
contaminated soil at the point of generation (principle (1)) and,
second, under the contained-in policy, soil that exhibits a
characteristic of hazardous waste must be managed as hazardous waste
(principle (2)) and, therefore, must comply with LDRs. Note that, once
LDRs have attached to soil that exhibits a characteristic of hazardous
waste, LDR treatment standards must be met prior to land disposal of
the soil, even if the characteristic is subsequently eliminated
(principle (3)).
The remainder of today's regulations on application of LDRs to
contaminated soil, which are in table form, apply to soil contaminated
with listed hazardous wastes. The table lists four scenarios.
In the first scenario, soil is contaminated with untreated listed
hazardous waste that was prohibited from land disposal when first land
disposed (e.g., prohibited hazardous waste that was illegally placed or
prohibited hazardous waste that was spilled). In this case, LDRs have
already attached to the hazardous waste. Therefore, since LDRs have
attached to the waste and threats have not yet been minimized (i.e.,
treatment standards have not been met), under principle (3) LDRs
continue to apply to the waste and, automatically, to any contaminated
soil.44 The Agency has concluded that LDRs apply to soils
contaminated in this way regardless of whether the soil is determined
not to (or no longer to) ``contain'' hazardous waste either when first
generated or at any time in the future. This conclusion comes from
application of principle (3): once something is prohibited from land
disposal, LDRs continue to apply until threats to human health and the
environment posed by land disposal are minimized regardless of whether
the material is at some point determined no longer to be ``hazardous.''
---------------------------------------------------------------------------
\44\ EPA is assuming that the waste did not meet a treatment
standard when it was placed on the soil. Wastes which meet a
treatment standard are no longer prohibited from land disposal and,
unless it is determined to ``contain'' hazardous waste at its point
of generation and are subsequently land disposed, soils contaminated
by these wastes are, likewise, not prohibited from land disposal.
See, RCA section 3004(m)(2) (hazardous wastes meeting treatment
standards are no longer prohibited from land disposal).
---------------------------------------------------------------------------
In the next two scenarios, soil is contaminated with hazardous
wastes that were not prohibited from land disposal when first land
disposed, but, sometime after land disposal, LDRs have gone into
effect. In these cases, whether or not LDRs apply to contaminated soil
is governed by a determination of whether or not any given volume of
contaminated soil ``contains'' hazardous waste at its point of
generation. If any given volume of soil is determined to contain
hazardous waste at its point of generation, LDRs attach (principles (1)
and (2)) and, therefore, the LDR treatment standards must be met prior
to placement of such soil in a land disposal unit (principle (3)). If
any given volume of soil is determined not to contain hazardous waste
at its point of generation, there is no hazardous waste to which a land
disposal prohibition could attach and the soil, thus, would not be
prohibited from land disposal (principles (1) and (2)). (It would be
the same if a hazardous waste land disposed before the effective date
of an applicable land disposal prohibition were delisted when first re-
generated. In that case too, there would be no hazardous waste to which
a land disposal prohibition could attach and the delisted waste, thus,
would not be prohibited from land disposal.) Note that, under principle
(3), once LDRs attach to contaminated soil, the treatment standards
must be met prior to land disposal even if the soil is, subsequently,
determined no longer to contain hazardous waste.
The final scenario requires no elaboration; it simply makes clear
that if soil is contaminated by hazardous waste that was never
prohibited from land disposal, LDRs do not apply. This is through
application, primarily, of principle (2)--LDRs attach only to hazardous
wastes or soil that contains hazardous waste.
Note that, because LDRs apply to the waste ``contained-in'' soil,
and not the soil itself (see principle (2)), LDRs do not apply to soil
that is at any time completely separated from its contaminating waste (
i.e., the soil contains no solid or hazardous waste, it's ``just
soil''). One might determine that soil contained no solid or hazardous
waste, for example, if concentrations of hazardous constituents fall
below natural background levels or are at non-detectable levels. Such a
determination would terminate all RCRA Subtitle C requirements,
including LDRs, since waste would not longer be ``contained-in'' the
soil. See September 15, 1996 letter from Michael Shapiro (EPA) to Peter
Wright (Monsanto Company), making this finding; see also, 61 FR 18806
(April 29, 1996) and other sources cited therein.
The following examples illustrate application of LDRs to
contaminated soil:
1. Generator A is excavating soil mildly contaminated with
wastewater treatment sludge (listed waste F006). The sludge was land
disposed before 1980. The soil does not exhibit a characteristic of
hazardous waste and has been determined by an authorized state not to
contain listed hazardous waste. The soil is not prohibited from land
disposal. This is because, for LDR purposes, the point of generation is
when the soil is first excavated from the land (principle (1)). Since
no prohibited hazardous waste existed before that time (i.e., the
contaminating waste was not prohibited) and the soil does not contain
listed hazardous waste or exhibit a characteristic of hazardous waste
at its point of generation, there is
[[Page 28619]]
no hazardous waste to which a land disposal prohibition could attach
(principle (2)).
2. Generator B is excavating soil contaminated by leaks from a
closing hazardous waste surface impoundment. The surface impoundment
received listed hazardous wastes K062 (spent pickle liquor) and
characteristic hazardous waste D018 (wastes that fail the TCLP test for
benzene). The surface impoundment stopped receiving K062 waste in 1987
and D018 waste in 1993. The soil does not exhibit a characteristic of
hazardous waste and has been determined by an authorized state not to
contain listed hazardous waste. The soil is not prohibited from land
disposal. This is because, for LDR purposes, the point of generation is
when the soil is first excavated from the land (principle (1)). Since
no prohibited hazardous waste existed before that time (i.e., the
contaminating wastes were not prohibited) and the soil does not contain
listed hazardous waste or exhibit a characteristic of hazardous waste
at its point of generation, there is no hazardous waste to which a land
disposal prohibition could attach (principle (2)).
3. Generator C is excavating soil contaminated with listed
hazardous waste F024. The F024 waste was land disposed after 1991,
after it was prohibited from land disposal, and was not first treated
to meet applicable land disposal treatment standards (i.e., it was
illegally land disposed or accidentally spilled). Since the
contaminating waste was prohibited from land disposal and treatment
standards were not achieved prior to land disposal, the LDR prohibition
continues to apply to any soil contaminated by the waste (principle
(3)) regardless of whether the soil ``contains'' hazardous waste when
generated. The soil is prohibited from land disposal and, before land
disposal, must be treated to meet applicable technology-based treatment
standards or until a site-specific, risk-based minimize threat
determination is made through the variance process.
4. Generator D is excavating soil contaminated by an accidental
spill of benzyl chloride, which, when discarded, is listed hazardous
waste P028 and is prohibited from land disposal. The accidental spill
occurred yesterday. The contaminating waste was prohibited from land
disposal and, since the treatment standards were not achieved prior to
the accidental spill, the prohibition continues to apply to any soil
contaminated by the waste (principle (3)). Thus, the soil is prohibited
from land disposal and, before land disposal, must be treated to meet
applicable technology-based treatment standards or until a site-
specific, risk-based minimize threat determination is made through the
variance process.
5. Generator E is excavating soil contaminated by listed hazardous
waste F004 (generally, spent non-halogenated solvents). The F004 waste
was land disposed in 1984, prior to the effective date of an applicable
land disposal prohibition; however, on generation the soil contains
high concentrations of cresols constituents, so that an authorized
state determines it ``contains'' hazardous waste. The soil is
prohibited from land disposal. Although the contaminating waste was not
prohibited from land disposal, since the soil contained hazardous waste
at the point of generation (and the waste had since become prohibited
from land disposal), the land disposal prohibition attaches to the
contaminated soil and, before land disposal, the soil must be treated
to meet applicable technology-based treatment standards or until a
site-specific, risk-based minimize threat determination is made through
the variance process (principles (1), (2), and (3)).
EPA acknowledges that the reading of LDR applicability to
contaminated soil discussed above creates potential administrative
difficulties, since, in many cases, a factual determination will be
required as to when hazardous wastes were land disposed in order to
determine whether they were prohibited at that time and whether,
therefore, the prohibition continues to apply to contaminated soil. The
Agency expects that these difficulties will be minimal because, in most
cases, contamination will be caused by hazardous wastes placed before
the effective date of applicable land disposal prohibitions since land
disposal after prohibition would be illegal. The exception is
accidental spills of hazardous waste, which the Agency believes are (1)
rare, and (2) known, so determining dates of land disposal should not
be problematic. This issue was discussed in detail in the HWIR-Media
proposal. 61 FR 18805 (April 26, 1996).
As discussed in the April 29, 1996 proposal, the Agency continues
to believe that, if information is not available or inconclusive, it is
generally reasonable to assume that contaminated soils do not contain
untreated hazardous wastes placed after the effective dates of
applicable land disposal prohibitions. This is because placement of
untreated hazardous waste after applicable LDR effective dates would be
a violation of RCRA, subject to significant fines and penalties
including criminal sanctions. 61 FR at 18805 (April 29, 1996). Of
course, program implementors and facility owners/operators cannot make
the determination that information on the types of waste contamination
or dates of waste placement is unavailable or inconclusive without
first making a good faith effort to uncover such information. By using
available site- and waste-specific information such as manifests, LDR
records required under 40 CFR 268.7, vouchers, bills of lading, sales
and inventory records, storage records, sampling and analysis reports,
accident reports, site investigation reports, spill reports, inspection
reports and logs, EPA believes that program implementors and facility
owners/operators will typically be able to make informed decisions
about the types of waste contamination and dates of waste placement.
Most commenters supported this approach.
EPA notes that it is not critical for a decision about whether
contaminated soil contains listed hazardous waste or exhibits a
characteristic of hazardous waste to be made without removing any of
the soil (other than the sample volume) from the land. In an area of
generally dispersed soil contamination, soil may be consolidated or
managed within the area of contamination to facilitate sampling, for
example, to ensure that soil samples are representative or to separate
soil from non-soil materials. However, care should be taken not to
remove hazardous contaminated soils from separate areas of
contamination at a facility and place such hazardous contaminated soil
into a land disposal unit unless, of course, the soil meets applicable
LDR treatment standards. The area of contamination policy is discussed
later in this section of today's preamble.
A few commenters expressed concern or confusion over the
application of LDRs to soil contaminated by accidental spills of
hazardous wastes. The Agency clarifies that accidental spills of
hazardous wastes (or products or raw materials) are not considered
placement of hazardous waste into a land disposal unit since, in the
case of a spill, prohibited waste is not being placed in one of the
identified units named in RCRA Section 3004(m).45 See, 45 FR
76626 (Nov. 19, 1980), issuing clarifying regulations at 40 CFR
264.10(g) to provide that hazardous waste treatment
[[Page 28620]]
and storage activities undertaken in immediate response to an
accidental spill are exempt from the 40 CFR Part 264 and 265
regulations governing treatment and storage and do not require permits
and Sept. 29, 1986 memo from J. Winston Porter (EPA Assistant
Administrator) to Fred Hansen interpreting the 40 CFR 264.10(g)
regulations; also see, 55 FR at 30808-30809 (July 27, 1990) (``a one-
time spill of hazardous waste would not be considered a solid waste
management unit.'') However, contaminated soils generated through
remediation of spills of untreated listed prohibited hazardous wastes
are, as discussed above, subject to land disposal prohibitions since
the LDR prohibition that had attached to the contaminating hazardous
waste continues to apply until threats are minimized, and, therefore,
any contaminated soil remains subject to LDRs (see principle (3)).
---------------------------------------------------------------------------
\45\ Although, if such a spill were not cleaned up in a timely
way, EPA or an authorized state could determine that the
contaminated area should be considered a land disposal unit for
purposes of requiring cleanup under RCRA Subtitle C. 55 FR at 20809
(July 27, 1990).
---------------------------------------------------------------------------
A number of commenters expressed concern that EPA's interpretation
of LDR applicability to contaminated soil might preclude application of
the existing area of contamination policy. In the area of contamination
policy, EPA interprets RCRA to allow certain discrete areas of
generally dispersed contamination to be considered a RCRA unit (usually
a landfill). 55 FR 8758-8760 (March 8, 1999). This interpretation
allows hazardous wastes (and hazardous contaminated soils) to be
consolidated, treated in situ or left in place within an area of
contamination without triggering the RCRA land disposal restrictions or
minimum technology requirements--since such activities would not
involve ``placement into a land disposal unit,'' which is the statutory
trigger for LDR. EPA clarifies that its interpretation of LDR
applicability for contaminated soil does not, in any way, affect
implementation of the area of contamination policy.
Finally, many commenters expressed concern over EPA's application
of the LDR treatment standards to soil that is determined no longer to
contain hazardous waste or exhibit a characteristic of hazardous waste.
As discussed in detail in the 1996 proposal, at this time EPA has
concluded that although the Chemical Waste opinion did not speak to
contaminated soil specifically, it is prudent to apply the Chemical
Waste logic--that a duty to comply with LDRs attaches to hazardous
waste when it is first generated and elimination of the indicia of
``hazardousness'' does not, necessarily, fulfil the statutory land
disposal restriction treatment standard--to contaminated soil. See
Chemical Waste Management v. EPA, 976 F.2d at 13-16. Although, as
discussed later in today's preamble, EPA believes that contained-in
determinations will rarely, if ever, be made at constituent
concentrations which do not minimize threats, without codifying the
contained-in policy, the Agency cannot make the generic finding that
this will be the case at every site. For this reason, EPA is requiring
that the standards and procedures promulgated today for site-specific,
risk-based minimize threat variances alone be used to make minimize
threat determinations. This issue is discussed in section VII.E of
today's preamble.
C. Conforming and Supporting Changes
To support the land disposal restriction treatment standards for
contaminated soil, the Agency is today promulgating a number of
conforming and supporting regulations, as follows.
1. Recordkeeping Requirements
A number of commenters expressed confusion over the recordkeeping
and reporting requirements that would apply to contaminated soil. The
Agency is today clarifying that contaminated soil subject to the land
disposal restrictions must comply with the same recordkeeping and
reporting requirements as other wastes subject to the land disposal
restrictions. That is, the recordkeeping and reporting requirements of
40 CFR 268.7 will apply.
EPA has clarified this in the final regulations by adding
appropriate recordkeeping requirements for contaminated soils to the
tables in 40 CFR 268.7(a) and 40 CFR 268.7(b). These rules specify
that, for contaminated soil, generators and/or treaters must include
the following information with their land disposal restriction
paperwork: the constituents subject to treatment as described in 40 CFR
268.49(d) and this statement, ``this contaminated soil [does/does not]
contain listed hazardous waste and [does/does not] exhibit a
characteristic of hazardous waste and [is subject to/complies with] the
soil treatment standards as provided by 268.49(c) or the universal
treatment standards.'' Note that because in some cases contaminated
soil will continue to be subject to LDRs even after it has been
determined not to or no longer to contain listed hazardous waste (or
de-characterized), the statement includes a notification of whether the
soil is still considered hazardous. This is consistent with the
approach the Agency used when establishing land disposal restriction
treatment standards for hazardous contaminated debris.
2. Definition of Soil
The Agency is promulgating the definition of soil from the April
29, 1996 proposal with one change made in response to comments. Soil is
defined as, ``unconsolidated earth material composing the superficial
geologic strata (material overlying bedrock), consisting of clay, silt,
sand, or gravel size particles as classified by the U.S. Soil
Conservation Service, or a mixture of such materials with liquids,
sludges or solids which is inseparable by simple mechanical removal
processes and is made up primarily of soil by volume, based on visual
inspection.'' The Agency has added the phrase ``by volume, based on
visual inspection'' in response to comments recommending that EPA
explicitly conform the definition of soil with the definition of
debris. See 57 FR 37222 (August 18, 1992). This clarification is
consistent with the Agency's intent, as discussed in the 1996 proposal,
that determinations of whether any material was ``soil,'' ``debris,''
or ``waste'' to be made in the field. 61 FR 18794 (April 26, 1996).
The definition of soil includes the concept that mixtures of soil
and other materials are to be considered soil provided the mixture is
made up predominantly of soil and that the other materials are
inseparable using simple physical or mechanical means. This approach
allows program implementors and facility owners/operators to determine
whether any given material is soil, waste, or debris based on the
results of simple mechanical removal processes commonly used to
separate materials, such as pumping, dredging, or excavation by
backhoe, forklift or other device. It avoids requiring chemical
analysis for soil properties in order to differentiate precisely
between wastes, soil and debris. As discussed in the April 29, 1996 and
September 14, 1993 proposals, the Agency believes that attempting to
distinguish more precisely between waste, soil or debris using chemical
analysis or other tests would be prohibitively difficult to develop and
support and cumbersome to administer. Cf. 57 FR at 37224, August 18,
1992, where the Agency adopted a similar classification system for
hazardous debris. Most commenters supported this approach. Note that
any non-soil that is separated from contaminated soil that contains
listed hazardous waste or is found to exhibit a characteristic of
hazardous waste should be considered hazardous waste and is subject to
the applicable universal treatment standard.
[[Page 28621]]
EPA also emphasizes that any dilution of a prohibited contaminated
soil (or of a prohibited hazardous waste with soil) as a substitute for
adequate treatment to achieve compliance with LDR treatment standards
or to circumvent the effective date of an LDR prohibition is considered
a type of impermissible dilution and is illegal. Therefore, any
deliberate mixing of prohibited hazardous waste with soil in order to
change its treatment classification (i.e., from waste to contaminated
soil) is illegal. Existing regulations concerning impermissible
dilution already make this point. See 40 CFR 268.3(a) and (b); see also
57 FR at 37243 (Aug. 18, 1992) (adopting the same principle for
contaminated debris). The Agency expects that deliberate mixing of
hazardous waste with soil (and vice versa) will be rare because such
actions are clearly illegal and would subject generators to substantial
fines and penalties, including criminal sanctions. In addition, the
resulting mixture (hazardous waste impermissible diluted by soil) would
continue to be subject to the LDRs for the original hazardous waste
(i.e., generally, the universal treatment standards), so no benefit in
terms of reduced treatment requirements would occur. The Agency took a
similar approach when promulgating treatment standards specific to
hazardous debris. See 57 FR at 37224 (August 18, 1992).
The Agency notes that the normal mixing of contaminated soil from
various portions of a site that typically occurs during the course of
remedial activities or in the course of normal earthmoving and grading
activities is not considered intentional mixing of soil with non-media
or prohibited soil with non-prohibited soil and, therefore, is not a
type of impermissible dilution.
D. Seeking Treatment Variances Because the National Treatment Standard
is Unachievable or Inappropriate
Under existing regulations at 40 CFR 268.44, people may obtain a
variance from a land disposal restriction treatment standard when a
waste cannot be treated to the specified level or when a treatment
standard may be inappropriate for the waste. With respect to
contaminated soils, EPA has to this point presumed that a treatment
variance would generally be needed because the LDR treatment standards
developed for process wastes were either unachievable (generally
applied to soil contaminated by metals) or inappropriate (generally
applied to soil contaminated by organic constituents). See, for
example, 55 FR 8760 (March 8, 1990); 58 FR 48092, 48125 (September 14,
1993); 61 FR 18805-18808, 18810-18812 (April 29, 1996); and, 61 FR
55717 (October 28, 1996). This presumption will no longer apply once
today's soil treatment standards take effect. This is because today's
standards were developed specifically for contaminated soils and are
intended to specifically address the past difficulties associated with
applying the treatment standards developed for process waste to
contaminated soil.
This is not to say that treatment variances based on the
``unachievable'' or ``inappropriate'' prongs of the test are now
unavailable for contaminated soils. For example, in some cases it may
prove that even though an appropriate technology, suited to the soil
matrix and constituents of concern was used, a particular soil cannot
be treated to meet the soil treatment standards using a well-designed
well-operated application of one of the technologies EPA considered in
establishing the soil standards. In these types of cases, under
existing regulations, the soil treatment standard would be considered
``unachievable'' and a treatment variance could be approved. In other
cases, under existing regulations, application of the soil treatment
standards might be ``inappropriate'' in that, for example, it would
present unacceptable risks to on-site workers.
As noted earlier in today's preamble, alternative LDR treatment
standards established through treatment variances must, according to 40
CFR 268.44(m), ``minimize threats to human health and the environment
posed by land disposal of the waste.'' In cases where an alternative
treatment standard does not meet this requirement, a treatment variance
will not be approved even though application of a technology more
aggressive than the technologies on which the soil treatment standards
are based might then be necessary. For example, in cases where the soil
treatment standards cannot be achieved through application of a well-
designed, well-operated application of one of the model soil treatment
technologies and application of the model technology or other non-
combustion technologies will not result in constituent concentrations
that minimize threats, a variance would not be approved and combustion
would be necessary. This is proper given that the soil treatment
standards were not developed using the methodology typically used in
the land disposal restriction program (i.e., application of the most
aggressive treatment technology to the most difficult to treat waste),
but, instead are designed to accommodate a variety of soil treatment
technologies that are typically used during remediation. Variances for
treatment of contaminated soil will be applied during the remedial
context, where, as discussed in Section VII.B.3 of today's preamble,
EPA and authorized states will typically have detailed information
about the risks posed by specific hazardous constituents, direct and
indirect exposure routes, risk pathways and human and environmental
receptors. This information can be used to inform decisions about
whether threats are minimized.
E. The Contained-In Policy
The contained-in principle is the basis for EPA's longstanding
interpretation regarding application of RCRA Subtitle C requirements to
mixtures of contaminated media and hazardous wastes. Under the
``contained-in'' policy, EPA requires that soil (and other
environmental media), although not wastes themselves, be managed as if
they were hazardous waste if they contain hazardous waste or exhibit a
characteristic of hazardous waste. See, for example, 53 FR 31138, 31148
(August 17, 1988) and 57 FR 21450, 21453 (May 20, 1992) (inadvertently
citing 40 CFR 261(c)(2) instead of 40 CFR 261.3(d)(2)); see also
Chemical Waste Management v. EPA, 869 F.2d 1526, 1539-40 (D.C. Cir.
1989) (upholding the contained-in principle as a reasonable
interpretation of EPA regulations). In practice, EPA has applied the
contained-in principle to refer to a process where a site-specific
determination is made that concentrations of hazardous constituents in
any given volume of environmental media are low enough to determine
that the media does not ``contain'' hazardous waste. Typically, these
so called ``contained-in'' determinations do not mean that no hazardous
constituents are present in environmental media but simply that the
concentrations of hazardous constituents present do not warrant
management of the media as hazardous waste.46 For
contaminated soil, the result of ``contained-in determinations'' is
that soil no longer ``contains'' a
[[Page 28622]]
hazardous waste; however, as discussed above, the result is not
automatically that soil no longer must comply with LDRs.
---------------------------------------------------------------------------
\46\ Of course, as noted earlier, EPA or an authorized state
could determine, at any time, that any given volume of environmental
media did not contain (or no longer contained) any solid or
hazardous waste (i.e., it's just media). These types of
determinations might be made, for example, if concentrations of
hazardous constituents fall below background levels, or are at non-
detectable levels. Such a determination would terminate all RCRA
Subtitle C requirements, including LDRs. See, September 15, 1995
letter from Michael Shapiro (EPA) to Peter Wright (Monsanto
Company), making this finding, and 61 FR 18806 (April 29, 1996).
---------------------------------------------------------------------------
In order to preserve flexibility and because EPA believes
legislative action is needed, the Agency has chosen, at this time, not
to go forward with the portions of the September 14, 1993 or April 29,
1996 proposals that would have codified the contained-in policy for
contaminated soils. The Agency continues to believe that legislation is
needed to address application of certain RCRA subtitle C requirements
to hazardous remediation waste, including contaminated soil. If
legislation is not forthcoming, the Agency may, in the future, re-
examine its position on the relationship of the contained-in policy to
site-specific minimize threat determinations based on implementation
experience and/or may choose to codify the contained-in policy for
contaminated soil in a manner similar to that used to codify the
contained-in policy for contaminated debris.
1. Current Guidance on Implementation of the Contained-in Policy
EPA has not, to date, issued definitive guidance to establish the
concentrations at which contained-in determinations may be made. As
noted above, decisions that media do not or no longer contain hazardous
waste are typically made on a case-by-case basis considering the risks
posed by the contaminated media. The Agency has advised that contained-
in determinations be made using conservative, health-based levels
derived assuming direct exposure pathways. 61 FR at 18795 (April 29,
1996) and other sources cited therein. A compilation of many of the
Agency's statements on the contained-in policy has been placed in the
docket for today's rulemaking.
The land disposal restriction treatment standards for contaminated
soil promulgated today do not affect implementation of the contained-in
policy. They are not considered, and should not be used, as de facto
``contained-out'' concentrations although, in some cases, it may be
appropriate to determine that soil treated to the soil treatment
standards no longer contains hazardous waste. Remediation project
managers should continue to make contained-in decisions based on site-
specific conditions and by considering the risks posed by any given
contaminated media.
2. Relationship of the Contained-In Policy to Site-Specific, Risk-Based
Minimize Threat Determinations
As discussed above, the D.C. Circuit held in the Chemical Waste
opinion that the RCRA Section 3004(m) obligation to minimize threats
can continue even after a waste would no longer be identified as
``hazardous.'' Chemical Waste Management v. EPA, 976 F.2d at 13-16. The
Agency believes that it is prudent to apply the logic of the Chemical
Waste opinion to contaminated soil. Therefore, when the contained-in
policy is applied to soil that is already subject to a land disposal
prohibition, the Agency is compelled to decide if a determination that
soil does not or no longer ``contains'' hazardous waste is sufficient
to determine that threats posed by subsequent land disposal of those
soils have been minimized. As discussed earlier in today's preamble,
EPA is not, at this time, able to make a generic finding that all
contained-in determinations will automatically satisfy this standard.
This is largely because, for reasons of needed administrative
flexibility and because we believe legislation is needed, EPA has not
codified standards for approving contained-in determinations and has
not codified procedures for making such determinations. Absent such
standards and procedures, the Agency cannot, at this time, make a
generic finding that all contained-in determinations will result in
constituent concentrations that also minimize threats within the
meaning of RCRA Section 3004(m). These decisions, of course, could be
made on a site-specific basis, by applying the standards and procedures
for site-specific, risk-based minimize threat variances, promulgated
today.
The regulations governing site-specific, risk-based minimize threat
determinations promulgated today are, essentially, the same as the
Agency's guidance for making contained-in determinations. See, for
example, 61 FR 18795 (April 29, 1996) and other sources cited therein.
That is, decisions should be made by considering the inherent risks
posed by any given soil, assuming direct exposure (i.e., no post-land
disposal controls) and applying conservative information to calculate
risk. Therefore, the Agency expects that, in most cases, a
determination that soils do not (or no longer) contain hazardous waste
will equate with minimize threat levels and, therefore, encourages
program implementors to combine contained-in determinations, as
appropriate, with site-specific, risk-based minimize threat variances.
F. Relationship of Soil Treatment Standards to the Final HWIR-Media
Rule
In the April 29, 1996 HWIR-Media proposal, EPA proposed to
establish a comprehensive alternative management regime for hazardous
contaminated media, of which the treatment standards for contaminated
soil would have been a small part. The HWIR-Media proposal discussed a
number of options for comprehensive management standards for hazardous
contaminated media.
Today's action resolves and finalizes the portion of the HWIR-Media
proposal that addressed land disposal restriction treatment standards
for contaminated soil. See 61 FR 18805-18814, April 29, 1996. Other
portions of the proposal are not resolved by this action and will be
addressed by EPA in future actions. EPA continues to emphasize that,
while the soil-specific LDR treatment standards will improve
contaminated soil management and expedite cleanups, the Agency also
recognizes that additional reform is needed, especially for management
of non-media remediation wastes like remedial sludges. The Agency will
continue to participate in discussions on potential legislation to
promote this additional needed reform.
VIII. Improvements and Corrections to LDR Regulations
Summary: The regulated community has pointed out several examples
of the LDR regulations that were unclear or had typographical errors.
These sections are clarified and corrected below.
A. Typographical Error in Section 261.1(c)(10)
A typographical error was found in the cross reference in the note
in Sec. 261.1(c)(10). The first Phase IV final rule (``Minirule,'' 62
FR 25998) said ``They are covered under the exclusion from the
definition of solid waste for shredded circuit boards being recycled
(261.4(a)(13)).'' The correct cross reference is to ``(261.4(a)(14).''
This typographical error is corrected in this final rule.
B. Typographical Error in Section 268.4(a)(2)(ii) and (a)(2)(iii)
These paragraphs have referred to Sec. 268.8 for some time. Section
268.8 was where the so called ``soft hammer'' provisions were once
found in the regulations. These provisions expired in 1990, and the
provisions have been removed from the regulations; thus there is no
need to continue to include references to Sec. 268.8.
[[Page 28623]]
C. Clarifying Language Added to Section 268.7
The first item in the paperwork tables requires that the EPA
Hazardous Waste and Manifest numbers be placed on the notification
forms. Today's changes clarify that the manifest number required to be
placed on the notification form is that of the first shipment of waste
to the treatment or disposal facility.
The tables of paperwork requirements found at Sec. 268.7(a)(4) and
(b)(3) have entries that describe what waste constituents have to be
identified on the one-time LDR notification (see item 3 in the
generator table at Sec. 268.7(a)(4), and item 2 in the treatment and
storage facility table at Sec. 268.7(b)(3)). The language of these
items has been changed to avoid confusion about whether wastes managed
at facilities subject to the Clean Water Act (CWA), CWA-equivalent
facilities, or wastes injected into deepwells subject to the Safe
Drinking Water Act (SDWA) are subject to a paperwork requirement (and
if so, what requirements). Wastes managed in these facilities are
subject to a one-time notification requirement. This notification must
be placed in the facility's on site files and must contain the
information described in the paperwork tables. Therefore, the
parenthetical language that appeared to exclude such facilities from
the paperwork requirements has been removed from item 2 in the
``Generator'' table, and item 3 in the ``Treatment Facility'' table.
In addition, these items have been further clarified by adding the
language ``in characteristic wastes'' after the clause ``and underlying
hazardous constituents,'' to indicate exactly what type of wastes must
be considered when determining whether underlying hazardous
constituents are present. The title of the paperwork table at
Sec. 268.7(b)(3) has been changed to clarify that the requirements
apply to storage facilities as well as treatment facilities. A number
of certifications were inadvertantly removed from Sec. 268.7(b) through
Office of Federal Register drafting errors. Those certifications are
reinstated because it was never the intention of the Agency that they
were removed.
D. Correction to Section 268.40--Treatment Standards for Hazardous
Waste
In the Phase III Final Rule (61 FR 15566), the Agency promulgated a
UTS of 12.0 mg/L for 1,4-dioxane wastewaters based on the performance
of distillation. At that time, 1,4-dioxane was the only UTS constituent
for which EPA had promulgated a nonwastewater standard but not a
wastewater standard. However, as part of that rule, the Agency failed
to extend the treatment standard to wastewater forms of U108 wastes.
Today, the Agency is correcting this oversight in Section 268.40--
Treatment Standards for Hazardous Wastes, by replacing the ``NA''
designation under AU108 -1,4-Dioxane [email protected] with ``12.0 mg/L.''
As such the 1,4-Dioxane alternate treatment standard now applies to
both wastewater and nonwastewaters forms of U108 waste.
E. Removal of California List Requirements and de minimis Provision
From Section 268.42
In the Phase IV rule promulgated on May 12, 1997, EPA removed the
California List requirements because they have all been superseded by
more specific treatment standards. The California List included liquid
wastes containing certain metals, cyanide, polychlorinated biphenyls
(PCBs) above specified levels, and liquid and nonliquid halogenated
organic compounds (HOCs) above specified levels. These wastes were
removed from the Table of Treatment Standards in Sec. 268.40; however,
the requirements in Sec. 268.42(a)(1) and (a)(2) were overlooked. These
paragraphs are removed by today's rule. And because these paragraphs
are being removed, it is necessary to revise the language of
Sec. 268.42(a) to remove references to these paragraphs.
The de minimis provision of paragraph Sec. 268.42(a)(3) is also
being removed by today's rule. The de minimis provision applied to
wastewaters regulated under the Clean Water Act (CWA) mixed with high
total organic carbon (TOC) ignitable wastes. In the Phase III final
rule, however, wastes discharged under the CWA, or in a facility that
is CWA-equivalent, are not subject to the LDRs (61 FR 15660, April 8,
1996). Therefore the de minimis provision was redundant and has been
removed by today's rule.
F. Typographical Errors and Outdated Cross-References in Section 268.45
There is a typographical error in Sec. 268.45(a). The language has
referred to Sec. 261.3(c)(2), a section removed from the regulations on
September 30, 1992 (57 FR 49278). It should refer to Sec. 261.3(f)(2).
The correction is being made in this final rule.
In paragraphs (3) and (4) in Sec. 268.45(d) there are outdated
cross references to treatment standards that were once found at
Sec. 268.42 and Sec. 268.43 (the treatment standards once found in
these sections have been consolidated into the ``Table of Treatment
Standards'' at Sec. 268.40). These cross references have been removed
from Sec. 268.45(d)(3) and (d)(4).
G. Correction to Sec. 268.48 to Explain That Sulfides are not
Regulated as Underlying Hazardous Constituents in Characteristic Wastes
In response to a comment received on the original Phase IV
proposal, EPA reviewed the basis for the universal treatment standard
for sulfides in the Universal Treatment Standard Table at 40 CFR
268.48. EPA is correcting the table in this rule. Sulfides are
regulated only in Waste Code F039 (multi-source leachate), and not as
underlying hazardous constituents in characteristic wastes.
H. Cross References in Section 268.50(e)
Erroneous references appeared in this section to Secs. 268.41,
268.42, 268.43, and 268.32. They are eliminated in this final rule.
I. Mistakes in Appendices VII and VIII
Table 1 includes entries for F033. There is no hazardous waste with
the EPA waste code F033. Therefore, these entries are being removed.
The second entry for waste codes F032, the second entry for F034, and
the first entry for K088 contained typographical errors that are being
revised in today's final rule. In addition, two entries for waste code
F035 are being added to the table. Table 2 is amended by revising entry
number 9 to change the prohibition date for soil and debris
contaminated with K088 wastes.
The title of appendix VIII is revised to clarify that it provides
the effective dates for wastes injected into deep wells.
J. Clarification Regarding Point of Generation of Boiler Cleanout
Rinses
In the May 12, 1997 final Phase IV rule, EPA included in the
preamble an interpretive discussion regarding at what point the Agency
considers a waste to be generated when power plant boilers are cleaned
out using multiple rinses. 62 FR at 26006. The question is relevant to
the issue of whether subtitle C rules apply to such waste, and also, if
the waste is to be land disposed, whether LDR prohibitions apply. In
essence, the interpretation is that the cleanout of the boiler is to be
viewed as a single process, so that if the boiler cleanout liquids are
commingled in a single tank system, the hazardousness of the resulting
cleanout liquids is to be determined at the end of the cleaning
process. Id.
[[Page 28624]]
Some confusion has arisen regarding whether this interpretation
applies to permanent storage tanks, or only to temporary tanks brought
on-site to manage the boiler cleanout rinses. The Agency's view is that
the interpretation applies to temporary tanks, and also to permanent
tanks when such units are used exclusively for the management of boiler
cleanout during the boiler cleanout process. (Such tanks could, of
course, be engaged in other activities when they are not dedicated to
management of boiler cleanout waste during the cleanout process.)
EPA did state in the May 12 notice that ``[t]he interpretation * *
* does not apply where there are permanent storage units involved.'' 62
FR at 26007. What the Agency had in mind was a tank already engaged in
the permanent storage of hazardous waste. However, so long as a tank is
dedicated solely to storage of boiler cleanout rinses during the boiler
cleanout process, there is no environmental distinction between whether
or not a temporary or permanent tank is used for the purpose.
Consequently, the point of generation interpretive principle announced
in the May 12 notice applies to both permanent and temporary tanks
systems.
IX. Capacity Determination for Phase IV Land Disposal Restrictions
A. Introduction
This section summarizes the results of the capacity analysis for
the wastes covered by today's rule. For a detailed discussion of
capacity analysis-related data sources, methodology, and response to
comments for each group of wastes covered in this rule, see the
background document for the capacity analysis and the background
document for the comment summary and response for capacity-related
issues (i.e., collectively referred to as the Capacity Background
Documents).
In general, EPA's capacity analysis focuses on the amount of waste
to be restricted from land disposal that is currently managed in land-
based units and that will require alternative treatment as a result of
the LDRs. The quantity of wastes that are not managed in land-based
units (e.g., wastewater managed only in RCRA exempt tanks, with direct
discharge to a Publicly Owned Treatment Works (POTW)) is not included
in the quantities requiring alternative treatment as a result of the
LDRs. Also, wastes that do not require alternative treatment (e.g.,
those that are currently treated using an appropriate treatment
technology) are not included in these quantity estimates.
EPA's decisions on when to establish the effective date of the
treatment standards (e.g., by granting a national capacity variance)
are based on the availability of alternative treatment or recovery
technologies. Consequently, the methodology focuses on deriving
estimates of the quantities of waste that will require either
commercial treatment or the construction of new on-site treatment as a
result of the LDRs. EPA also estimates the quantities of waste that
will be treated adequately either on site in existing systems or off
site by facilities owned by the same company as the generator (i.e.,
captive facilities), and attempts to subtract that amount from the
overall amount of required capacity.
B. Available Capacity for Surface Disposed Wastes
Available capacity was estimated for four treatment technology
categories that are expected to be used for the majority of wastes in
today's rule: stabilization (including chemical fixation),
vitrification, metal recovery, and thermal treatment. (Numerous other
types of treatment also can meet the treatment standards for much of
these wastes, although the Agency did not find it necessary to present
the estimates of available capacity of these treatments. See the
Capacity Background Documents for further information.)
1. Stabilization
EPA estimates that there are at least several million mt/yr of
available stabilization capacity, with most of it able to meet the
treatment requirements for the TC metal wastes and newly identified
mineral processing wastes. Furthermore, the Agency found that currently
utilized stabilization capacity can be quickly modified (i.e., in less
than 90 days) to meet the new treatment standards by implementing
relatively simple changes to formulations. For additional details, see
the Capacity Background Documents.
2. Vitrification
EPA has determined that vitrification technology is commercially
available for treating limited quantities of Phase IV wastes, such as
some arsenic wastes, that are difficult to treat using stabilization
and other techniques. EPA estimates that there are approximately 15,000
mt/yr of available vitrification capacity.
3. Metal Recovery
High temperature and other types of metal recovery appears to be
the most applicable treatment for certain wastes containing high
concentrations of metal constituents. EPA identified and reviewed
several metal recovery technologies that are commercially available,
and has determined that at least 800,000 mt/yr of metal recovery
capacity exists.
EPA recognizes, however, that not all of this capacity will be
available for Phase IV wastes. For example, there are technical
constraints on the metal recovery systems stemming from metal content
limitations of the waste. Nevertheless, the Agency believes that a
significant portion of this capacity is amenable to Phase IV wastes.
For additional details, see the Capacity Background Documents.
4. Thermal Treatment
EPA estimates that there are approximately 231,000 mt/yr of
commercial sludge/solid/soil combustion capacity and 651,000 mt/yr of
commercial liquid combustion capacity available for wastes covered by
today's rule. Other types of thermal treatment, such as thermal
desorption, also are available. For additional details, see the
Capacity Background Documents.
C. Required Capacity and Variance Determination for Surface Disposed TC
Metal Wastes
EPA estimates that at most, 1.2 million mt/yr of TC metal wastes
could require alternative treatment as a result of promulgation of
today's rule. This estimate includes both wastes that are newly-
identified TC wastes (i.e., wastes that do not fail the EP test, and,
consequently, were not part of the Third Third LDR rule) and wastes
that fail the EP test (i.e., those wastes that were regulated in the
Third Third LDR rule). Although only the newly identified TC wastes are
eligible for a national capacity variance, the capacity analysis
includes all wastes affected by the rule because estimates for each
category are not available, and, furthermore, because all of these
wastes need to be assessed to determine the full impact of this rule on
the need for a capacity variance. Additionally, the 1.2 million
estimated quantity is likely to be an overestimate because most of
these wastes are already meeting the new treatment standards. Also,
most of these wastes are likely to fail the EP test and, therefore, are
no longer eligible for a capacity variance.
The wastes that will require alternative treatment are expected to
primarily only require optimization of existing stabilization
formulations and systems. Also, sufficient vitrification capacity
exists to treat the otherwise difficult-to-treat TC metal wastes, high
temperature metal recovery capacity
[[Page 28625]]
exists for some of the TC metal wastes, and sufficient and other
combustion capacity exists to pre-treat TC metal wastes that contain
organic underlying hazardous constituents (UHCs). The Agency has
determined that these conclusions also apply to TC metal contaminated
debris. In addition, the other debris treatment technologies set out in
268.45 are widely available.
For TC metal contaminated soils, the Agency believes that the
treatment standards, ten times UTS or 90% reduction, will not result in
any capacity problems for treating metals since most soils are already
meeting these standards and, furthermore, there is an excess of
stabilization treatment capacity. Additionally, for treating organics
to the alternative treatment standards, sufficient treatment capacity
exists from use of other technologies (e.g., thermal desorption, soil
washing, biotreatment).
To allow facilities time to determine whether their wastes are
affected by this rule and identify and locate alternative treatment
capacity if necessary, EPA is providing 90 days between the publication
of today's rule and the effective date of the treatment standards for
the TC metal wastes, including soil and debris, covered by today's
rule. For a detailed discussion on data sources, methodology, and
comments and responses for these wastes, see the Capacity Background
Documents.
D. Required Capacity and Variance Determination for Surface Disposed
Mineral Processing Wastes
EPA estimates that the maximum quantity of newly identified mineral
processing wastes potentially requiring alternative treatment is
approximately 1.9 million mt/yr. Most of these wastes (approximately
1.8 million mt/yr) are already being treated to nonhazardous levels
and, therefore, are not expected to require much, if any, additional
treatment. The remaining wastes, approximately 71,000 mt/yr, will
require treatment to meet the treatment standards. However, adequate
on-site and off-site treatment capacity is available for these wastes.
The Agency has determined that these conclusions also apply to debris
contaminated with mineral processing wastes. In addition, the other
debris treatment technologies set out in 268.45 are widely available.
For soils contaminated with mineral processing wastes, the Agency
believes that the treatment standards, ten times UTS or 90 percent
reduction, will not result in any capacity problems. Nevertheless, to
allow time for activities such as treatment system modifications or to
identify and locate alternative treatment capacity for process wastes,
soil, and debris, EPA is providing 90 days between the publication of
today's rule and the effective date of the treatment standards for the
mineral processing wastes, contaminated soil (including MGP soil; see
discussion below), and debris covered by today's rule (one exception is
the elemental phosphorus wastes; see discussion below). For a detailed
discussion on data sources, methodology, and comments and responses for
these wastes, see the Capacity Background Documents.
EPA estimates that up to 1.2 million mt/yr of soil contaminated
with ``de-Bevilled'' wastes may be remediated from historic
manufactured gas plant (MGP) sites. In response to the first
supplemental proposal, several commenters stated that more than 50
percent of the MGP remediation sites are currently co-burning the
wastes in on-site coal-fired utility boilers and requested the Agency
to allow co-burning of MGP soils in coal-fired utility boilers and
exclude them from RCRA requirements. In today's rulemaking, the Agency
is confirming its existing (and not reopened) interpretation that
residues from co-burning hazardous MGP soils along with coal are
covered by the Bevill amendment (assuming the residues are not
significantly affected by such burning, as provided in section
266.112). In addition, as discussed elsewhere in this notice, the
Agency is promulgating treatment standards (ten times UTS or 90 percent
reduction) for contaminated soils. On-site treatment and existing
commercially available treatment technologies can readily achieve--and
to a large extent are already achieving--the treatment standards for
contaminated MGP soil. Therefore, the Agency does not anticipate any
capacity problems. To allow facilities time to determine whether their
wastes are affected by this rule, to identify alternative treatment
capacity if necessary, and to make contractual arrangements for
transportation and other logistics, EPA is providing 90 days between
the publication of today's rule and the effective date of the treatment
standards for MGP soils.
In the first supplemental proposed rule, the Agency identified the
following three waste streams generated from elemental phosphorus
production as lacking sufficient commercial treatment capacity: Medusa
scrubber blowdown, Anderson filter media rinsate, and furnace building
washdown. A major generator of these waste streams, the FMC
Corporation's Pocatello, Idaho facility, provided a substantial amount
of data to show that these waste streams pose unique treatability
problems (e.g., due the presence of naturally occurring radioactive
materials (NORM)) and that a two-year national capacity variance is
needed to develop and construct treatment capacity. After careful
review of the data, EPA discussed in the May 10, 1996 Notice of Data
Availability, the possibility of a two-year national capacity variance
for these three large volume wastewater streams. In May 1997, EPA
proposed the second supplemental Phase IV rule (62 FR 26041) and, in
response to this proposal, FMC submitted a comment to EPA with new
information identifying three other waste streams (NOSAP slurry,
precipitator slurry, and phossy water) at its Pocatello, Idaho facility
that FMC believes would be subject to Phase IV LDR requirements. FMC
requested that a two-year national capacity variance also be granted
for these three new waste streams. Like the original waste streams, the
three newly identified streams are generated in the elemental
phosphorous production process and contain varying amounts of both NORM
and elemental phosphorous. FMC also noted that the AFM Rinsate waste
stream, for which FMC originally requested a national capacity
variance, has been completely eliminated, and that therefore a national
capacity variance would no longer be needed for this waste stream. The
Agency made these additional data available for public comment in a
November 10, 1997 NODA (62 FR 60465). No adverse comments were
received. The Agency has decided to grant a two-year capacity variance
for all five FMC wastestreams.
Details of the methodology and estimates of affected facilities and
waste quantities for the newly identified mineral processing wastes are
provided in the Capacity Background Documents.
E. Phase IV Mineral Processing and TC Metal Wastes Injected Into
Underground Injection Control (UIC) Class I Wells
Summary: EPA is granting a two-year capacity variance for UIC wells
that inject newly identified mineral processing wastes from titanium
dioxide production.
There are approximately 272 Class I injection well facilities
nationwide. The Agency identified approximately 46 of those facilities
as potentially injecting Phase IV wastes. These injected Phase IV
wastes account for less than 15 percent of the total injectate being
managed by Class I wells annually. Most of these facilities potentially
identified already have approved no-migration
[[Page 28626]]
petitions. In assessing the impact of the Phase IV rule to operators of
UIC facilities, the Agency found that the only potentially affected
wells are those injecting newly identified characteristic mineral
processing wastes, since other characteristic wastewaters were already
prohibited in 1990 and the period for possible capacity extensions for
these wastes has run out. (See UIC background document explaining in
detail why the other wastes are unaffected.)
For a facility with an existing approved no-migration
determination, the facility operator may have already incorporated the
subject waste in the original petitions. Any facility with an approved
no-migration determination without the waste already incorporated may
submit a modified petition (40 CFR Part 148.20 (f)). However, if an
injection well has received a no-migration determination, it can inject
a newly prohibited waste only if the waste is similar to wastes
included in the initial no-migration petition. The new wastes must
behave hydraulically and chemically in a similar manner to those
already included in the initial petition demonstration such that they
will not interfere with the containment capability of the injection
zone and the location of the waste plume will not significantly differ
from the initial demonstration (See 40 CFR 148.20 (f) & UIC Program
Guidance # 74)). Based on this information, promulgation of the Phase
IV LDRs should have little impact on any facilities with approved
petitions.
EPA estimates that approximately five million tons of mineral
processing wastes are being disposed annually in UIC wells. Of these,
approximately three million tons are attributable to titanium dioxide
production from two DuPont facilities. This volume is a conservative
estimate based on highly complex, non-segregable waste stream mixtures.
This total volume would be subject to the LDR treatment standards.
Titanium dioxide (TiO2) production wastes are either generated onsite
at facilities with injection wells, or at facilities without injection.
For these DuPont facilities, this waste is generated and disposed
onsite by injection wells. In order for these facilities to continue
injection of this restricted waste, a no-migration petition must be
approved to meet the conditions of 40 CFR Part 148.20 of the UIC
regulations.
For those facilities disposing restricted Phase IV TiO2 mineral
processing waste, their options may be limited to meeting treatment
standards (onsite or offsite), submitting a no-migration petition,
transporting their waste to a commercial Class I hazardous disposal
well facility, or deactivating (diluting) the waste to make it
nonhazardous before injection (see RCRA section 3004 (g) (9), a recent
amendment which allows such dilution). All of these options are
resource intensive and owners/operators of these facilities will be
faced with critical economic and business decisions. These TiO2
facilities do not have immediate capability to treat their waste
onsite. If they were to opt for treatment onsite, it would require
substantial time and resources to build a treatment facility or to
substantially modify their existing facility. It would take at least
two years (and possibly longer) to construct such a treatment system.
In evaluating various disposal alternatives, one DuPont facility is
currently constructing a treatment works that will integrate a
neutralization project based on current production. As an alternative
to deep well injection disposal, the long term construction at this
facility has been costly and operational start-up will require
additional time to work out issues. See DuPont letter of Feb. 5, 1998.
With respect to the options of managing the waste water offsite,
severe practical constraints limit the availability of capacity to
these DuPont Ti02 facilities. A typical volume of Ti02 wastewater is
900,000 Gallons (3,750 tons) per day; and peak production volumes are 1
million Gallons (4,167 tons) per day. DuPont letters of Feb. 5 & 20,
1998. At peak production, this would take 200 tanker trucks per day for
each affected facility to ship the volume of waste that is currently
injected. Additionally, these trucks must be constructed with
fiberglass or titanium tanks to be compatible to the low pH-highly
corrosive acid waste (Note from ICF to R. E. Smith to RCRA Docket (Feb.
17, 1998)). Indeed, it is not even certain that existing 10, 000 gallon
tanker trucks are compatible with this wastestream, due to its weight
(the TDS content is so high that a 10, 000 gallon tanker could only be
half full) and corrosivity. Dupont letter of Feb. 20, 1998.
Commercial waste management facilities normally cannot feasibly
accommodate this daily volume. There are at least ten operating
commercial Class I hazardous waste injection facilities nationwide, it
is uncertain whether they have the capacity to accept 3 million tons of
TiO2 mineral processing waste annually for disposal because of
permitting limitations. These commercial wells also have finite
capacity limitations. The Agency studied the operational permit
parameters of these commercial facilities and found that individual
injection and flow capacity rates (UICWELLS Database) may restrict
injection of additional high volumes of waste. Rates are scientifically
and mathematically determined to avoid damage to the well and the
injection zone. Further study of compatibility requirements for these
wells suggest that they have acceptable construction for most wastes
disposed but not necessarily for the TiO2 production waste in its
present concentration. Without pretreatment, these waste
characteristics would require a more exotic well construction that is
composed of fiberglass injection tubing, titanium casing and packer,
epoxy and acid resistance compatible cement.
EPA has also looked at commercial wastewater treatment capacity in
the vicinity of the two DuPont facilities. For one facility, there are
no available commercial waste water treatment plants within 200 miles.
For the other facility, there are two treatment plants within 75 miles
but neither has the capacity to accept the high volumes of waste
generated by either DuPont facility (based on BSR data). Commercial
waste water treatment facilities generally handle corrosive toxic metal
waste waters by stabilization and neutralization techniques. Treatment
plants managing the Ti02 production waste waters would have to be
specially constructed and equipped not only to be amenable to a high
volume of acidic waste but also have the capacity to manage the huge
amount of solids that will yield from treatment. Thus, wastewater
treatment requires having pre-storage and processing units, adequate
chemicals to neutralize the corrosive characteristic of the waste and
stabilization technology to immobilize the metals before they are
either stored onsite, marketed, or landfilled. While the Agency is
satisfied that this treatment technology is applicable to Ti02 waste
water, there is much reservation whether DuPont's facilities could
realistically mobilize 200 tanker trucks per day per facility to safely
ship this waste to these treatment facilities even if treatment
capacity were readily available at them.
The statute also allows injection of waste waters which no longer
exhibit a characteristic into Class I wells without meeting any other
LDR treatment standard, and dilution may be used as a means of
decharacterizing the waste. RCRA section 3004 (g) (9). However,
deactivation of certain characteristic wastes through dilution is not
always practical or even feasible. The whole waste stream process may
not be amenable to dilution prior to injection
[[Page 28627]]
at the wellhead, and the geologic reservoirs into which the wells
inject have a finite capacity. Sometimes filling up reservoirs with
huge volumes of additional water shortens the life of the well
operation because reservoir pressures build up much more quickly and
the injection zone becomes ``overpressurized.'' EPA finds that this is
the case for the TiO2 wastewater at issue here. Thus, the dilution
option cannot be utilized here to find that there is adequate available
treatment capacity for these TiO2 wastes.
Capacity analyses usually focus on the demand for alternative
capacity once existing on-site capacity and captive off-site capacity
have been accounted for. However, capacity also may be unavailable if
there is no practical means of utilizing it due to logistical problems.
For example, in the Third Third rule, EPA relied on such logistical
factors to determine when capacity was realistically available (see 55
FR 22645-22646, June 1, 1990). The Agency noted that injection wells at
on-site facilities are directly connected to the plant operations and
that in order to realistically arrange for off-site disposition of the
waste, the plant managers will need time to make considerable
logistical adjustments such as, repiping, retooling, and development of
transportation networks at the plant operations. Similarly, for TiO2
waste facilities, the Agency doesn't believe that treatment capacity is
available since there is no feasible way for generators to transport
their wastes to the treatment facilities at this time, plus all of the
other repiping that would be entailed. The Agency believes that it
would take at least two years for the TiO2 facilities to alter their
operations to ship wastewater to offsite facilities and for off-site
facilities to make corresponding changes to their operations to
accommodate the large influx of highly corrosive, high volume, dense
wastewater (even if off-site facilities were to be willing to accept
the waste, which is quite unclear).
Under these circumstances, the Agency finds that there is
inadequate treatment, recovery, or disposal capacity presently
available for TiO2 injected waste waters currently being injected into
Class I hazardous wells, and therefore is granting a two-year national
capacity variance for these wastes. The Agency expects that affected
generators will utilize this period for applying for no-migration
petitions for their existing wells, or to construct on-site wastewater
treatment systems.
EPA estimates that there is approximately 2 million tons of other
injected Phase IV mineral processing wastes (i.e. from processes other
than TiO2 production). One facility with the largest volume of that
injected waste has applied for and received an approved no-migration
petition thus meeting the conditions of 40 CFR Part 148.20. The rest of
these facilities are either applying dilution as a means of
decharacterizing their waste (as allowed under Section 3004(g)(9)), or
are treating their waste before disposal. Their waste volumes are much
less than the TiO2 production waste being injected. Since the volume of
wastes is so much less than TiO2, and the wastes are more amenable to
conventional management, EPA does not see the same types of
difficulties arising, and is therefore not delaying the effective date
of the prohibition for these facilities. (See UIC background document).
F. Mixed Radioactive Wastes
Significant uncertainty exists about quantities of mixed
radioactive wastes containing wastes that will require treatment as a
result of today's rule. Despite this uncertainty, any new commercial
capacity that becomes available will be needed for mixed radioactive
wastes that were regulated in previous LDR rulemakings and whose
variances have already expired. Thus, EPA has determined that
sufficient alternative treatment capacity is not available, and
therefore is granting a two-year national capacity variance for mixed
RCRA/radioactive TC metal wastes that are newly identified (i.e.,
wastes, soil, or debris identified as hazardous by the TCLP but not the
EP), and newly identified characteristic mineral processing wastes
including soil and debris.
G. Summary
Table 1 summarizes the capacity variance determination for each
category of Phase IV RCRA wastes for which EPA is promulgating LDR
treatment standards.
Table of Capacity Variances for Phase IV Wastes
[Note: Capacity variances begin from the publication date]
----------------------------------------------------------------------------------------------------------------
Waste description Surface-disposed wastes Deep well-injected wastes
----------------------------------------------------------------------------------------------------------------
Newly identified wastes from elemental Two years...................... Not applicable.
phosphorus processing.
Newly identified mineral processing wastes 90 days........................ Two years.
from titanium dioxide production.
Newly identified TC metal wastes (i.e., wastes 90 days........................ 90 days.
identified as hazardous by the TCLP but not
the EP), and newly identified characterisitc
mineral processing wastes including soil and
debris.
Radioactive wastes mixed with newly identified Two years...................... Two years.
TC metal wastes (i.e., wastes identified as
hazardous by the TCLP but not the EP), and
mixed with newly identified characteristic
mineral processing wastes, including soil and
debris.
----------------------------------------------------------------------------------------------------------------
X. Change to Definition of Solid Waste To Exclude Wood Preserving
Wastewaters and Spent Wood Preserving Solutions From RCRA
Jurisdiction
Summary: As proposed on May 12, 1997 (FR 62 26055), EPA is today
amending the definition of solid waste to exclude wood preserving
wastewaters and spent wood preserving solutions from RCRA jurisdiction
provided that certain conditions are met, as specified below.
A. Summary of the Proposal
On May 12, 1997 in the Phase IV LDR second supplemental rulemaking,
EPA proposed to amend the RCRA regulations to provide an exclusion from
the definition of solid waste for certain materials generated and
recycled by the wood preserving industry. Specifically, the proposal
would exclude certain wood preserving wastewaters and spent wood
preserving solutions from classification as solid waste under RCRA. Any
wood preserving plant claiming the exclusion for these wastes would
need to manage them according to the following criteria: (1) the
materials must be recycled and reused on-site in the production process
for their original intended purpose; (2) the materials must be managed
to prevent release; (3) the plant must assure that the units managing
these materials can be visually or otherwise determined to
[[Page 28628]]
prevent releases; and (4) drip pads managing these materials must
comply with Subpart W drip pad standards regardless of whether the
plant has been classified as a conditionally exempt small quantity
generator (CESQG) (see 40 CFR 261.5). For a more detailed discussion of
these conditions, please consult the relevant sections in the May 12,
1997 proposed rule.
As noted above, the exclusion was to be limited to wood preserving
wastewaters and spent wood preserving solutions that are recycled and
reused on-site at wood preserving plants in the production process for
their original intended purpose. As EPA explained in the proposal, any
listed wastewater or spent solution that is not recycled on-site
according to the conditions of the exclusion is not excluded from the
definition of solid waste. Moreover, the F032, F034 and F035 listings
cover wastestreams other than wastewaters and spent solutions. These
other listed wastestreams would not be eligible for exclusion even if
recycled. This could include materials associated with wastewaters and
spent solutions, such as residues that accumulate in a drip pad sump.
EPA affirms this scope of the exclusion for the final rule.
It was neither the Agency's intent nor belief that the proposed
exclusion would in any way reduce the obligations that wood preserving
plants have under 40 CFR Part 264, Subpart W and Part 265, Subpart W,
including the requirements for drip pads and the Sec. 264.570(c) and
Sec. 265.440(c) requirements under for response to infrequent and
incidental drippage in storage yards. The Agency specifically requested
comment on whether the proposed exclusion would reduce these
requirements. The Agency also sought comment on whether a plant
claiming the proposed exclusion should be required to place a
notification form to that effect in its files on-site and/or to submit
it to either the EPA Regional Administrator or State Director to allow
review. Finally, EPA asked for comment concerning the conditions under
which the proposed exclusion, once claimed, would no longer apply.
Of course, this exclusion from the definition of solid waste under
the federal RCRA statute does not modify any regulatory requirements
that are independently imposed under other environmental statutes.
B. Modifications to the Proposal
The Agency received four sets of comments on the proposed exclusion
for wood preserving wastewaters and spent wood preserving solutions.
While some comments were supportive of the proposal, others were
critical of the Agency for, among other things, relinquishing some
regulatory oversight of the wood preserving industry. The comments EPA
received on the scope of the proposed exclusion and the Agency's
response can be found in the docket for this rulemaking. All comments
were carefully considered. This section addresses those changes that
EPA made to the proposed rule based on comments the Agency received.
The next section (``Other Comments'') addresses those aspects of the
proposal that, though they remain unchanged by today's rule, require
further clarification based on the comments received.
1. Notification
EPA received two responses to its request for comment on whether it
was necessary for a plant claiming the proposed exclusion to provide
notice to the appropriate regulatory agency and, if so, what type of
notice that should be. One commenter suggested that the publication of
the exclusion and its effective date by EPA in this final rule would
serve as sufficient notice, and that notification on a plant specific
basis is unnecessary. EPA does not consider publication of the final
rule to provide adequate notice on the names and locations of wood
preserving plants planning to operate under the conditional exclusion.
Moreover, EPA is concerned that this commenter may have assumed that
the exclusion would take effect nationwide upon publication. As
explained below in the section titled ``state authorization,'' this is
not correct. The exclusion will not take effect in any authorized state
unless and until the state adopts it.
The other commenter suggested that it is appropriate for wood
preserving plants claiming an exclusion for their recycled wastewaters
and spent solutions to notify the appropriate state agency. EPA
considers notification to the appropriate regulatory agency to be
essential to the proper implementation of this provision. To allow EPA
and authorized states to verify that the conditions placed upon today's
exclusion are properly met, it is important that wood preserving plants
inform the appropriate Regional Administrator or State Director that
they are claiming the exclusion and will therefore be reporting
significantly lower waste generation totals. EPA is therefore revising
the proposed exclusion to require a plant owner or operator (prior to
operating pursuant to this exclusion) to submit to the appropriate
Regional Administrator or State Director a one-time notification
stating that the plant intends to claim the exclusion, giving the date
on which the plant intends to begin operating under the exclusion, and
containing the following language: ``I have read the applicable
regulation establishing an exclusion for wood preserving wastewaters
and spent wood preserving solutions and understand it requires me to
comply at all times with the conditions set out in the regulation.''
The plant must maintain a copy of that document in its on-site records
for a period of no less than 3 years from the date specified in the
notice.
2. Conditions Under Which the Exclusion Would No Longer Apply
EPA requested comment on conditions that void the exclusion.
Specifically, EPA asked whether a spill should result in the loss of
the exclusion just for the spilled material, or also for the
wastewaters and spent solutions generated after the spill occurred. EPA
received two comments on conditions under which the exclusion, once
claimed, would no longer apply. One commenter stated that RCRA
regulation should be required for all materials that are spilled or
otherwise exit the recycling loop. The other commenter suggested that
``a simple spill . . . is obviously not related to the normal operation
of the drip pad . . .'' and should therefore not void the exclusion for
wastewaters and spent solutions that are collected and not spilled or
released.
EPA agrees with the commenter who took the position that the
spilled material itself should be ineligible for the exclusion. The
spilled material inherently fails to meet the condition requiring plant
operators to manage wastewaters and solutions so as to prevent
releases. Although there could potentially be conditions under which a
spilled material could still be eligible for the existing exclusions
under Sec. 261.4(a)(9)(i) and (ii) following reclamation, such
materials are in all cases ineligible for today's new exclusion under
Sec. 261.4(a)(9)(iii).
To respond to the second comment, EPA has decided to clarify the
effect of a violation of any condition, including the condition
prohibiting spills, on wastewaters and spent solutions generated after
a violation occurs. EPA has decided that the exclusion should not be
available until the plant owner or operator notifies the appropriate
regulatory agency, and the agency determines that the problem has been
adequately addressed. It is appropriate to impose this requirement even
for spills, because the significance of a spill may vary greatly from
plant to plant and from incident to incident. EPA hopes
[[Page 28629]]
that a reviewing agency would quickly reinstate the exemption after a
one-time spill, particularly if small, and would not require specific
actions to correct the problem. In contrast, EPA would expect the
reviewing agency to require specific actions (such as creation and
implementation of a spill prevention plan) for a plant that experienced
repeated spills. EPA believes the severity of any violation and the
precise actions needed to return the plant to compliance can best be
assessed on a case-by-case basis. EPA has added language to the
regulation to clarify this issue. It applies to all of the conditions
of the exclusion.
C. Other Comments
A number of comments indicated a need for EPA to clarify other
aspects of the proposal that the Agency is finalizing today.
1. Oil Borne Facilities
One commenter suggested that the exclusion that EPA is finalizing
today applies not only to water borne wood treating plants but also to
oil borne wood treating plants. At the time of proposal, EPA intended
to create an exclusion only for plants using water borne preservatives.
See, for example, the discussion at 63 FR 26057, col. 1. EPA did not
evaluate oil borne plants at the time. It is EPA's general
understanding that plants which use oil borne preservatives do not
recycle wastewaters and spent solutions by using them in the work tank
to treat wood. Rather, they reuse these wastewaters in cooling systems,
vacuum seals, and other devices. EPA wants to limit today's exclusion
to materials that are reused for their original intended purpose--the
treatment of wood. EPA has not had time to investigate the
jurisdictional and factual issues posed by the use of wastewaters for
other, more ancillary purposes. Consequently, EPA is not expanding the
exclusion beyond the proposal. It applies only to water borne
processes.
2. Application of the Conditions to Units Other Than the Drip Pad
One commenter expressed opposition to ``any language that would
extend the EPA's RCRA authority to devices that have previously not
been regulated under RCRA.'' In view of this comment, the Agency is
prompted to clarify that the conditions for claiming the exclusion must
be met with regard to any unit that comes into contact with the
recycled wastewaters and spent wood preserving solutions excluded in
today's rule.
Thus, sumps or other units that are arguably part of an exempt
wastewater treatment unit and that manage wastewaters and spent
solutions are subject to these conditions. EPA has already stated that
``management to prevent releases would include, but not necessarily be
limited to, compliance with [Subpart W] and maintenance of the sumps
receiving the wastewaters and spent solutions from the drip pad and
retort to prevent leaching into land and groundwater.'' (62 FR 26057).
The Agency must be able to verify that the excluded materials are being
managed to prevent release at every step of the recycling process
through reclamation to ensure that the basic technical and policy
conditions underlying the exclusion are properly met.
3. Relationship of Today's Exclusion to Previous Industry Exclusions
One commenter wanted to assure that today's exclusion would not now
regulate units that transmit or store materials that have been excluded
according to other, currently existing regulations. EPA does not intend
to use today's exclusion to rescind either of the exclusions that the
Agency has previously granted the wood preserving industry under
Secs. 261.4(a)(9)(i) and (ii).
4. Units That May Be Visually or Otherwise Determined to Prevent
Release
One commenter expressed concern that the term ``units'' is an
overly broad way to refer to those portions of the system subject to
RCRA inspection. EPA will now clarify which ``units'' are subject to
inspection under the conditions of this exclusion. As mentioned above,
all units that come into contact with the excluded materials prior to
reclamation must necessarily be subject to verification that they are
able to contain these materials in a manner that prevents their release
to the environment. This includes, but is not necessarily limited to,
any drip pad, sump, retort or conduit that comes into contact with the
wastewaters and spent solutions prior to reclamation. This also
includes any unit that is arguably part of a plant's wastewater
treatment system but that comes into contact with the wastewaters or
spent solutions prior to reclamation. An inspector must be able to
determine (by visual or other means) whether these units are managing
the wastewaters and spent solutions in a manner that prevents release.
When relying on a visual inspection (as opposed to a leak detection
system or other means), it may be necessary for an inspector to require
these units be drained or cleaned for the inspector to make an informed
determination as to whether the unit is cracked or leaking.
5. CESQG Status
One commenter also requested EPA to prevent wood preserving plants
from becoming conditionally exempt small quantity generators (CESQGs)
after claiming the exemption. The commenter was concerned that other,
non-excluded wastestreams generated at these plants that are covered by
the listings would no longer be subject to any hazardous waste
regulation. As explained in more detail in the response to comment
document, EPA lacks sufficient information about the volumes of these
other wastes and the risks they pose to promulgate a rule creating an
exception to the long-established CESQG exemption for them.
D. State Authorization
Upon promulgation, this exclusion will immediately go into effect
only for plants in those states and territories that are not currently
authorized to implement the RCRA program (i.e., Alaska, Iowa, Hawaii,
American Samoa, Northern Mariana Islands, Puerto Rico and Virgin
Islands). Plants in these states are subject to the provisions of the
federal program. Conversely, any plant located in a RCRA authorized
state will be unable to claim the exclusion we are finalizing today
unless and until that state amends its regulations to include the
exclusion. Because EPA allows state programs to be more stringent than
the federal program, it is not necessarily guaranteed that all
authorized states will elect to adopt this exclusion.
XI. Clarification of the RCRA Exclusion of Shredded Circuit Boards
In the May 12, 1997 final rule on Land Disposal Restrictions, the
Environmental Protection Agency (EPA) excluded shredded circuit boards
from the definition of solid waste conditioned on containerized storage
prior to recovery. To be covered by this exclusion shredded circuit
boards must be free of mercury switches, mercury relays, nickel-cadmium
batteries or lithium batteries. On a related issue, current Agency
policy states that whole circuit boards may meet the definition of
scrap metal and therefore be exempt from hazardous waste regulation. In
a parenthetical statement in the May 12, 1997 rule, the Agency asserted
that whole used circuit boards which contain mercury switches, mercury
relays, nickel-cadmium batteries, or lithium batteries also do not meet
the definition of scrap metal because mercury (being a liquid metal)
and batteries are not within the scope of the
[[Page 28630]]
definition of scrap metal. The preamble cited 50 FR 614, 624 (1985).
Members of the electronics industry expressed concern to the Agency
about the preamble statement regarding the regulatory status of whole
used circuit boards which contain mercury switches, mercury relays,
nickel-cadmium batteries, or lithium batteries. The electronics
industry indicated that its member have developed a sophisticated
asset/materials recovery system to collect and transport whole used
circuit boards to processing facilities. The industry explained that
the boards are sent to processing facilities for evaluation (continued
use, reuse or reclamation) where the switches and the types of
batteries are generally removed by persons with the appropriate
knowledge and tools for removing these materials. Once these materials
are removed from the boards, they become a newly generated waste
subject to a hazardous waste determination. If they fail a hazardous
waste characteristic, they are handled as hazardous waste, otherwise
they are managed as a solid waste. Information was also provided
regarding the quantity of mercury on these switches and on the physical
state in which they are found on the boards. The information indicates
that the mercury switches and relays on circuit boards from some
typical applications contain between 0.02-0.08 grams of mercury and are
encased in metal which is then coated in epoxy prior to attachment to
the boards.
In today's final rule, the Agency recognizes that the preamble
statement in the May 12, 1997 final rule is overly broad in that it
suggested that the scrap metal exemption would not apply to whole used
circuit boards containing the kind of minor battery or mercury switch
components and that are being sent for continued use, reuse, or
recovery. It is not the Agency's current intent to regulate under RCRA
circuit boards containing minimal quantities of mercury and batteries
that are protectively packaged to minimize dispersion of metal
constituents. Once these materials are removed from the boards, they
become a newly generated waste subject to a hazardous waste
determination. If they meet the criteria to be classified as a
hazardous waste, they must be handled as hazardous waste, otherwise
they must be managed as a solid waste.
XII. Regulatory Requirements
A. Regulatory Impact Analysis Pursuant to Executive Order 12866
Executive Order No. 12866 requires agencies to determine whether a
regulatory action is ``significant.'' The Order defines a
``significant'' regulatory action as one that ``is likely to result in
a rule that may: (1) have an annual effect on the economy of $100
million or more or adversely affect, in a material way, the economy, a
sector of the economy, productivity, competition, jobs, the
environment, public health or safety, or State, local, or tribal
governments or communities; (2) create serious inconsistency or
otherwise interfere with an action taken or planned by another agency;
(3) materially alter the budgetary impact of entitlements, grants, user
fees, or loan programs or the rights and obligations of recipients; or
(4) raise novel legal or policy issues arising out of legal mandates,
the President's priorities, or the principles set forth in the
Executive Order.''
The Agency estimated the costs of today's final rule to determine
if it is a significant regulation as defined by the Executive Order.
The analysis considered compliance costs and economic impacts for newly
identified wastes affected by this rule, as well as media contaminated
with these wastes. In addition, the analysis addresses the cost savings
associated with the new soil treatment standards being promulgated in
today's rule. Newly identified mineral processing wastes covered under
this rule include 118 mineral processing wastes identified as
potentially characteristically hazardous. Also covered under this rule
are TC metal wastes. Today's final rule also covers treatment standards
for contaminated media (i.e., soil and sediment). EPA estimates the
total cost of the rule to be a savings of $6 million annually, and
concludes that this rule is not economically significant according to
the definition in E.O. 12866. However, the Agency does consider this
rule to be significant for novel policy reasons. The Office of
Management and Budget has reviewed this rule.
Detailed discussions of the methodology used for estimating the
costs, economic impacts and the benefits attributable to today's
proposed rule for newly identified mineral processing wastes, followed
by a presentation of the cost, economic impact and benefit results, may
be found in the background documents: (1) ``Regulatory Impact Analysis
of the Phase IV Land Disposal Restrictions Final Rule for Newly
Identified Mineral Processing Wastes,'' (2)''Regulatory Impact Analysis
of the Phase IV Land Disposal Restrictions Final Rule for TC Metal
Wastes,'' and (3) ``Regulatory Impact Analysis of the Phase IV Land
Disposal Restrictions Final Rule for Contaminated Media,'' which were
placed in the docket for today's final rule.
1. Methodology Section
The Agency estimated the volumes of waste and contaminated media
affected by today's rule to determine the national level incremental
costs (for both the baseline and post-regulatory scenarios), economic
impacts (including first-order measures such as the estimated
percentage of compliance cost to industry or firm revenues), and
benefits or risk-screens used to document the inherent hazard of
materials being evaluated.
2. Results
a. Volume Results. EPA estimates that there are 29 mineral
commodity sectors potentially affected by today's rule, including an
estimated 136 facilities that generate 118 streams of newly identified
mineral processing secondary materials. The estimated volume for these
potentially affected newly identified mineral processing secondary
materials is 22 million tons. Also, approximately 1.3 million tons of
contaminated soil containing coal tar and other wastes from
manufactured gas plants are potentially affected by this rule. As
discussed below, EPA does not believe that any TC metal process wastes
are potentially affected by today's final rule. EPA estimates that
approximately 165,000 tons per year of soil and sediment contaminated
with TC metals and approximately 90,000 tons per year of previously
regulated contaminated soils is impacted by today's rule.
b. Cost Results For the part of today's final rule that prohibits
land storage of mineral processing residues (below the high volume
threshold) prior to being recycled, EPA estimates these expected case
annualized compliance costs to be $10 million. The cost results for
this part of today's final rule are a function of two factors: (1) the
expense associated with purchasing new storage units or upgrading
existing storage units, and (2) the transfer of some mineral processing
residues either from recycling to disposal resulting in increased costs
or from disposal to recycling resulting in a cost savings.
For TC metal wastes the Agency believes that there will be no
incremental costs associated with stabilization of these wastes from
the promulgation of these treatment standards.\47\ In addition, EPA
believes
[[Page 28631]]
that there will be no incremental treatment costs for the treatment of
TC metal wastes that contain organic underlying hazardous constituents.
Based on public comment and data collected from commercial hazardous
waste treaters and generators, EPA believes that TC metal wastes are
often already treated to these universal treatment standard levels when
waste handlers treat to the current treatment standards using bona fide
treatment reagents (e.g., portland cement).\48\ Therefore, no
additional treatment reagent or capital equipment associated with
stabilization is required with these wastes.
---------------------------------------------------------------------------
\47\ One possible exception to this are producers of hazardous
waste-derived fertilizers. This is discussed below under the
Regulatory Flexibility section.
\48\ December 19, 1996 letter to Anita Cummings, USEPA Office of
Solid Waste from Michael G. Fusco, Director of Regulatory Analysis,
Rollins Environmental Inc., p.4 of edited draft EPA trip report
letter to Rollins Highway 36 facility in Colorado.
---------------------------------------------------------------------------
Previously, EPA had estimated costs to the nonferrous foundry
industry associated with complying with today's treatment standards.
This estimate was modeled on trisodium phosphate with a ph buffer. When
this type of treatment reagent is used, incremental quantities are
required to achieve the universal treatment standards for cadmium
promulgated in today's rule. However, based on contacts with trade
associations and vendors of stabilization equipment, EPA believes that
portland cement is equal to or less than the cost of trisodium
phosphate and is therefore a more appropriate choice for modeling a
compliance baseline from which to estimate the costs of the rule.
Unlike trisodium phosphate, portland cement currently being used to
meet existing treatment standards has been shown to meet the universal
treatment standards without additional reagent. Accordingly, EPA
believes that no incremental costs (or benefits) for stabilization are
attributable to the promulgation of the universal treatment standards
for TC metal wastes.
Although according to the American Foundrymen's Society iron
filings are used by many nonferrous foundries as a treatment reagent,
for the reasons discussed above under Section III (f), EPA does not
believe that iron filings are a legitimate and effective form of
treatment. Therefore, the costs of switching from iron filings to
another form of treatment reagent such as portland cement is more
appropriately characterized as a cost of coming into compliance with
already existing treatment standards rather than an incremental cost
attributable to today's rule. Although EPA does not believe the cost of
switching from iron filings to another treatment reagent is
attributable to today's final rule, the Agency has estimated these
compliance costs and included this information in the background
document ``Regulatory Impact Analysis of the Phase IV Land Disposal
Restrictions Final Rule for TC Metal Wastes,'' which was placed in the
docket for today's final rule. EPA estimates that the annual cost to
nonferrous foundries to switch from iron to portland cement to
stabilize hazardous foundry sands is $11.7 million. Results from the
risk screen for nonferrous foundry sands are discussed below.
For TC metal hazardous wastes that contain organic underlying
hazardous constituents, one commenter has suggested that the Phase IV
final rule would result in costs resulting from changing from
stabilization of these wastes to incineration. EPA has evaluated data
from the National Hazardous Waste Constituent Survey to assess both the
prevalence and level of organic underlying hazardous constituents in TC
metal wastes (solid and sludges). The results indicate that organic
underlying hazardous constituents are rarely present in these wastes.
Only seven of 181 TC metal hazardous wastes examined contained organic
underlying hazardous constituents. Of these seven, only three contained
organics above the Univeral Treatment Standard. None of the three waste
steams that contained organics above the Univeral Treatment Standard
was present in concentrations high enough to warrant incineration. In
short, it is unlikely that organic underlying hazardous constituents
will be present in TC metal wastes. And if present, incineration is
unlikely to be used to treat these wastes. For reasons, EPA believes
that the Phase IV final rule will not result in incremental costs for
TC metal wastes containing organic underlying hazardous constituents.
The Agency is also promulgating new soil treatment standards in
today's final rule. As these standards are less stringent than those
currently required for previously regulated soils, an estimate of the
cost savings associated with these standards has been prepared. The
total incremental savings estimated for the new soil treatment
standards is $25 million per year.
For contaminated soils which exhibit a characteristic for TC metals
(including soils containing newly identified mineral processing wastes)
but do not contain organic underlying hazardous constituents, there is
no incremental cost expected from today's rule. These soils are subject
to the new treatment standards which are less stringent than current
LDR treatment standards for contaminated soils. The one category of TC
hazardous metal contaminated soil that is potentially impacted by
today's rule is TC hazardous metal contaminated soil which contains
organic underlying hazardous constituents. These soils require
additional treatment over that received in the baseline to effectively
treat the organic constituents of concern. The Agency estimates that
this additional requirement will result in a $3 million per year cost
for these wastes, occurring mainly at voluntary cleanups and Superfund
sites.
Manufactured gas plant contaminated soils (MGP) are a class of
contaminated media that has heretofore not been subject to LDR
treatment standards. EPA believes that some incremental costs may
result from today's final rule to MGP clean ups involving the use of
MGP soils in land applied recycling such as hot or cold mix asphalt,
brick and concrete. It is possible that some of these soils will not
meet the conditional exemption for waste-derived products that are used
in a manner constituting disposal. 40 CFR Sec. 266.20(b). For this
reason, it is also possible that owner/operators of these sites may
select an alternative remedy such as in-situ treatment or co-burning
which are not affected by today's rule. On balance, EPA still believes
that the promulgation of new treatment standards will encourage
remediation of hazardous soils. The estimated annual costs to owner/
operators of MGP sites for selecting remedies that are alternatives to
asphalt, brick or concrete recycling are $6.2 million.
c. Economic Impact Results. To estimate potential economic impacts
resulting from today's final rule, EPA has used first order economic
impacts measures such as the estimated compliance cost of the rule as a
percentage of sales/revenues, value added (sales less and material
cost) and profit or return on capital. EPA has applied these measures
to newly identified mineral processing hazardous wastes.
For recycled mineral processing secondary materials, EPA has
evaluated the estimated compliance costs as a percentage of value (i.e.
sales), value added and profits of the mineral commodities produced in
each sector. In addition EPA has compared estimated compliance costs as
a percentage of revenues to specific mineral processing firms to
provide additional information on potential impacts.
[[Page 28632]]
Economic impacts from today's rule for mineral processing
facilities may or may not be substantial for selected mineral
processing sectors depending on the actual storage and management of
mineral processing residues prior to being recycled. In the expected
case scenario up to 5 of the 29 commodity sectors are expected to incur
compliance costs equal to or greater than 1 percent of the economic
value of the mineral commodities produced under the Agency's proposed
option in today's rule. These sectors include: cadmium, fluorspar and
hydrofluoric acid, mercury, selenium and tungsten. The range of
percentages in these sectors is between 2 percent (cadmium) and 36
percent (mercury). Because many of these sectors are actually co-
processed with other mineral commodity sectors, these impacts may be
distributed over the economic value of the other minerals, rather than
concentrated solely on the mineral commodity associated with generating
the secondary materials. For example, EPA has estimated that today's
final rule may affect the cadmium and selenium sectors by imposing
incremental costs equal to 18 percent of the value added of those
minerals. The value added is equal to the market value of the minerals
less the cost of the raw materials (i.e., ore concentrate). Cadmium is
a co-product of zinc production and selenium is co-product of copper
production; hence, these economic impacts are expected primarily to
affect the production of these co-products and the reclamation of their
residuals rather than the mineral processing operation as a whole.
Because recovery for these co-product residuals is generally less
expensive than treatment and disposal, EPA believes that the costs for
these residuals will not significantly decrease their recovery although
the storage costs could add to the expense.
As stated above, the Agency believes that there are no incremental
costs associated with today's final rule for stabilization for handlers
of TC metal hazardous wastes. Moreover, the Agency believes that there
are no incremental costs associated with TC metal wastes containing
organic underlying hazardous constituents may incur costs as described
above and corresponding impacts. Accordingly, there is no economic
impact for waste handlers managing TC metal wastes.
For TC hazardous foundry sands, EPA also believes that there is no
economic impact attributable to today's final rule. As stated above,
EPA views the cost associated from switching from iron filings to
cement or other treatment reagent are not properly considered
attributable to this rulemaking but rather a cost of coming into
compliance with existing regulations. Moreover, even if these costs
were attributable to this rulemaking, EPA estimates that incremental
costs attributable to this switching from iron filings to portland
cement are less than one percent of industry revenues and six percent
of industry profits and therefore would not create a significant impact
to these facilities. More detailed information on this estimate can be
found in the regulatory impact analysis placed into today's docket.
As previously stated, EPA does not believe there are incremental
costs associated with today's rule for TC hazardous metal contaminated
soils except for TC hazardous metal contaminated soils that contain
organic underlying hazardous constituents. EPA has evaluated the
industries generating these TC metal organometallic soils and has
determined that incremental costs from today's final rule do not impose
a significant impact.
Similarly, EPA has determined for MGP site clean ups that the
economic impact of today's rule is not a significant impact. The
estimated percentage of compliance costs to firm sales is less than 1
percent.
d. Individual Risk Estimate Results. The Agency has performed an
individual risk analysis to estimate the quantifiable central tendency
and high-end hypothetical individual risk for mineral processing
secondary materials associated with today's final rule to be above
levels of concern for cancer and noncancer risks for specific mineral
processing streams in both groundwater and nongroundwater pathways.
Results suggest that central tendency and high-end hypothetical
individual cancer and non-cancer risks may be decreased below
1 x 10-5 and below a reference dose ratio of 1 in a number
of mineral processing facilities. These results are linked primarily
with mineral processing liquid secondary materials stored in surface
impoundments prior to reuse. The data used to calculate these results
are based on the groundwater pathway as well as other potential routes
of exposure such as air or surface water. The risk results indicate
that the highest individual risks are associated with exposure through
groundwater and surface water pathways. These results are also limited
to a subset of the mineral processing universe being regulated today
where the Agency has collected data from individual mineral processing
facilities. EPA also notes that in completing these individual risk
results that the entire mass of hazardous constituents available for
release in the waste management unit was available for release through
each pathway. This could result in overestimation in risks due to
double counting of constituent mass. To address this factor, EPA
conducted mass balance calculations for all non-groundwater release
pathways. These calculations indicate that this potential overestimate
would result in negligible bias because only a very small percentage of
hazardous constituents in the waste mass is available for release. In
addition, EPA did not conduct these mass balance calculations for the
groundwater pathway because of limitations in the methodology for which
individual groundwater risks were calculated. The Agency believes that
the potential bias in risk results for both surface impoundments and
waste piles is low.
As stated above the Agency's efforts to evaluate benefits for
mineral processing secondary materials were limited to calculations for
central tendency and high-end individual risk. However, due to data
limitations, the Agency has been unable to evaluate additional more
explicit risk-reduction benefits, including populations benefits. In
general, the Agency's experience has been that it is unusual to predict
high population risks, unless there is an unusually large water well
supply impacted by the facility, because ground water contamination
generally moves slowly and locally.
Although the regulatory impact analysis completed for today's rule
does not address benefits associated with ecological risk reduction and
a decrease in natural resource damages, based on a review of available
information on damage incidents associated with mining and mineral
processing operations \49\, the Agency's experience is that, while
these types of benefits are extremely difficult to quantify, this rule
may produce benefits in the area of ecological risk reduction and
reduced natural resource damage.
---------------------------------------------------------------------------
\49\ See Human Health and Environmental Damages from Mining and
Mineral Processing Wastes, Technical Background Document Supporting
the Supplemental Proposed Rule Applying Phase IV Land disposal
Restrictions to Newly Identified Mineral Processing Wastes, U.S.
Office of Solid Waste, U.S. Environmental Protection Agency,
December 1995; Ecological Risk Assessment Southshore Wetlands for
the Kennecott Utah Copper Salt Lake City, Utah. Working Draft March
4, 1996; May 7, 1996 letter from Max H. Dodson, Assistant Regional
Administrator for Ecosytem Protection and Remediation, U.S.E.P.A,
Region VIII to Michael Sahpiro, Director, Office of Solid Waste,
U.S.E.P.A.
---------------------------------------------------------------------------
For TC metals, because the analysis shows that many handlers of TC
metal wastes are already meeting the universal treatment standards
being promulgated
[[Page 28633]]
in today's rule, EPA does not believe that there are either incremental
costs or benefits associated with stabilization of these wastes.
However, for TC hazardous nonferrous foundry sands, the Agency has
completed a risk screening for groundwater releases of lead and cadmium
resulting from the disposal of untreated or poorly treated sands in
municipal solid waste landfills. The results of the screen indicate
that the probability the lead and cadmium would exceed the action level
for lead of 0.015 mg/l or the drinking water standard for cadmium of
0.005 mg/l for untreated foundry sands was approximately 9 percent for
lead and 14 percent for cadmium. The risk results also showed that the
probability for hazardous foundry sands treated to the universal
treatment standard to exceed these standards were approximately 2
percent for lead and 7 percent for cadmium. Because of data
limitations, EPA is not able to demonstrate population benefits
associated with effective treatment of foundry sands. These risk
results do, however, document the intrinsic hazard of the sands and the
need for effective treatment of these sands. However, as indicated
above, EPA would attribute any public health benefits associated with
decreasing lead and cadmium concentrations from foundry sands leachate
to coming into compliance with existing regulations rather than
promulgation of today's universal treatment standards.
B. Regulatory Flexibility
The Regulatory Flexibility Act (RFA) generally requires an agency
to conduct a regulatory flexibility analysis of any rule subject to
notice and comment rulemaking requirements unless the agency certifies
that the rule will not have a significant economic impact on a
substantial number of small entities. Small entities include small
businesses, small not-for-profit enterprises, and small governmental
jurisdictions. Based on the following discussion, this final rule will
not have a significant impact on a substantial number of small
entities.
With respect to mineral processing facilities that are small
entities, EPA believes that today's final rule will not pose a
significant impact to a substantial number of these facilities. EPA
identified 22 firms owning 24 mineral processing facilities that are
small businesses based on the number of employees in each firm. Under
the Agency's proposed option, zero firms out of the 24 identified
incurred estimated compliance costs that exceed 1 percent of reported
firm revenues.
As discussed above in the cost and economic impact section on TC
metal wastes, EPA has determined that treating TC metal wastes will not
result in incremental costs to the regulated community. As stated
above, data from commercial treaters and generators of TC metal wastes
indicate that the wastes are already treated to below UTS levels.
Moreover, today's rule will not result in increased costs from
incinerating TC metal wastes with organic underlying hazardous
constituents. EPA's review of data from commercial hazardous wastes
treatment facilities indicates that TC metal wastes with organic
underlying hazardous constituents are not prevalent and when present
would rarely require incineration.
Finally, after the close of the public comment period,
representatives of small business hazardous waste-derived fertilizer
producers met with the Agency claiming economic hardship resulting from
the Agency's proposed UTS for metal wastes. Under existing 40 CFR
Sec. 266.20(b) commercial fertilizers sold for public use must meet
treatment standards in order to be placed on the land. Currently all
such hazardous waste fertilizers (except for K061-derived fertilizers)
are subject to treatment standards for metals at the characteristic
level. Based on available information, the Agency has found that out of
10 secondary small business zinc fertilizer producers only two firms in
the United States produce a hazardous waste-derived fertilizer, meet
the definition of a small business and are subject to this today's
rule. Considering a limited range of regulatory responses (such as
switching from a hazardous to a non-hazardous source of zinc waste),
EPA believes that only one of the two firms could potentially incur a
significant economic impact. Because only one firm in this industry is
potentially affected by today's rule, EPA does not consider this to be
a substantial number of small entitities.
Additionally, there are incremental costs estimated to result from
today's rule to facilities undergoing remediation of TC metal
contaminated soils and sediments with organic underlying hazardous
constituents. EPA estimates that between 34 and 93 small entities would
be impacted by these costs. Two firms out of the 93 identified as an
upper bound estimate incurred estimated compliance costs that exceed 1
percent of reported firm revenues. Therefore, I certify that this
action will not have a significant economic impact on a substantial
number of small entities.
C. Unfunded Mandates Reform Act
Title II of the Unfunded Mandates Reform Act of 1995 (UMRA), P.L.
104-4, establishes requirements for Federal Agencies to assess the
effects of their regulatory actions on State, local, and tribal
governments and the private sector. Under Section 202 of the UMRA, EPA
generally must prepare a written statement, including a cost-benefit
analysis, for proposed and final rules with ``Federal mandates'' that
may result in expenditures to State, local, and tribal governments, in
the aggregate, or to the private sector, of $100 million or more in any
one year. Before promulgating an EPA rule for which a written statement
is needed, section 205 of the UMRA generally requires EPA to identify
and consider a reasonable number of regulatory alternatives and adopt
the least costly, most cost-effective, or least burdensome alternative
that achieves the objectives of the rule. The provisions of section 205
do not apply when they are inconsistent with applicable law. Moreover,
section 205 allows EPA to adopt an alternative other than the least
costly, most cost-effective, or least burdensome alternative if the
Administrator publishes with the final rule an explanation why that
alternative was not adopted. Before EPA establishes any regulatory
requirements that may significantly or uniquely affect small
governments, including tribal governments, it must have developed under
section 203 of the UMRA a small government agency plan. The plan must
provide for notifying potentially affected small governments, enabling
officials of affected small governments to have meaningful and timely
input in the development of EPA regulatory proposals with significant
Federal intergovernmental mandates, and informing, educating, and
advising small governments on compliance with the regulatory
requirements.
EPA has determined that this rule does not include a Federal
mandate that may result in estimated costs of $100 million or more to
either State, local, or tribal governments in the aggregate. The rule
would not impose any federal intergovernmental mandate because it
imposes no enforceable duty upon State, tribal or local governments.
States, tribes and local governments would have no compliance costs
under this rule. It is expected that states will adopt similar rules,
and submit those rules for inclusion in their authorized RCRA programs,
but they have no legally enforceable duty to do so. For the same
reasons, EPA also has determined that this rule contains no regulatory
[[Page 28634]]
requirements that might significantly or uniquely affect small
governments. In addition, as discussed above, the private sector is not
expected to incur costs exceeding $100 million. EPA has fulfilled the
requirement for analysis under the Unfunded Mandates Reform Act.
D. Paperwork Reduction Act
The information collection requirements in this rule have been
submitted for approval to the Office of Management and Budget (OMB)
under the Paperwork Reduction Act, 44 U.S.C. 3501 et seq. EPA has
prepared an Information Collection Request (ICR) document: OSWER ICR
No. 1442.15 would amend the existing ICR approved under OMB Control No.
2050-0085. This ICR has not been approved by OMB and the information
collection requirements, although they are less stringent than those
previously required by the EPA, are not enforceable until OMB approves
the ICR. EPA will publish a document in the Federal Register when OMB
approves the information collection requirements showing the valid OMB
control number. An agency may not conduct or sponsor, and a person is
not required to respond to, a collection of information unless it
displays a currently valid OMB control number. The OMB control numbers
for EPA's regulations are listed in 40 CFR Part 9 and 48 CFR Chapter
15.
Copies of this ICR may be obtained from Sandy Farmer, OPPE
Regulatory Information Division; U.S. Environmental Protection Agency
(2136); 401 M St., S.W.; Washington, D.C. 20460 or by calling (202)
260-2740. Include the ICR number in any request.
The Agency has estimated the average information collection burden
of this final Phase IV rule to the private sector and the government.
The burden of this final rule to the private sector is approximately
4,880 hours over three years, at a cost of $943,942. The burden to EPA
is approximately 787 hours over three years, at a cost of $29,841. The
term ``burden'means the total time, effort, or financial resources
expended by persons to generate, maintain, retain, or disclose or
provide information to or for a Federal agency. This includes the time
needed to review instructions; develop acquire, install, and utilize
technology and systems for the purposes of collecting, validating, and
verifying information; process and maintain information and comply with
any previously applicable instructions and requirements; train
personnel to be able to respond to a collection of information; search
data sources; complete and review the collection of information; and
transmit or otherwise disclose the information.
Send comments on the Agency's burden reduction, the accuracy of the
provided burden estimates, and any suggested methods for minimizing
respondent burden, including through the use of automated collection of
techniques to the Director, OPPE Regulatory Information Division; U.S.
Environmental Protection Agency (2136); 401 M St., S.W.; Washington, DC
20460; and to the Office of Information and Regulatory Affairs, Office
of Management and Budget, 725 17th St., N.W., Washington, D.C. 20503,
marked ``Attention: Desk Officer for EPA.'' Include the ICR number in
any correspondence.
XIII. Environmental Justice
A. Applicability of Executive Order 12898
EPA is committed to address environmental justice concerns and is
assuming a leadership role in environmental justice initiatives to
enhance environmental quality for all residents of the United States.
The Agencies goals are to ensure that no segment of the population,
regardless of race, color, national origin, or income bears
disproportionately high and adverse human health and environmental
effects as a result of EPA's policies, programs, and activities, and
all people live in clean and sustainable communities.
B. Potential Effects
Today's rule covers high-metal wastes (``TC metal wastes,''
hazardous mineral processing wastes, and mineral processing materials).
The rule will possibly affect many facilities nationwide, with the
potential for impacts to minority or low-income communities. Today's
rule is intended to reduce risks to human health and the environment,
and to benefit all populations. It is not expected to cause any
disproportionate impacts to minority or low income communities versus
affluent or non-minority communities.
XIV. State Authority
A. Statutory Authority
Under section 3006 of RCRA, EPA may authorize qualified States to
administer and enforce the RCRA hazardous waste program within the
State. Following authorization, EPA retains enforcement authority under
sections 3008 (a)(2), 3013, and 7003 of RCRA, although authorized
States have primary enforcement responsibility. The standards and
requirements for authorization are found in 40 CFR Part 271.
Prior to the Hazardous and Solid Waste Amendments of 1984 (HSWA), a
State with final authorization administered its hazardous waste program
in lieu of EPA administering the Federal program in that State. The
Federal requirements no longer applied in the authorized State, and EPA
could not issue permits for any facilities that the State was
authorized to permit. When new, more stringent Federal requirements
were promulgated or enacted, the State was obliged to enact equivalent
authority within specified time frames. New Federal requirements did
not take effect in an authorized State until the State adopted the
requirements as State law.
In contrast, under RCRA section 3006(g) (42 U.S.C. 6926(g)) new
requirements and prohibitions imposed by HSWA take effect in authorized
States at the same time that they take effect in unauthorized States.
Although States are still required to update their hazardous waste
programs, EPA is directed to carry out the HSWA requirements and
prohibitions in authorized States, including the issuance of permits,
until the State is granted authorization.
Authorized States are required to modify their programs only when
EPA promulgates Federal requirements that are more stringent or broader
in scope than existing Federal requirements. RCRA section 3009 allows
the States to impose standards more stringent than those in the Federal
program. See also 40 CFR 271.1(i). Therefore, authorized States can,
but do not have to, adopt Federal regulations, both HSWA and non-HSWA,
that are considered less stringent. Less stringent regulations,
promulgated under both HSWA and non-HSWA authority, do not go into
effect in authorized States until those States adopt them and are
authorized to implement them.
B. Effect on State Authorization
Today's rule is promulgated in part pursuant to non-HSWA authority,
and in part pursuant to HSWA. The more stringent HSWA portions of this
rule will become effective at the same time in all states. The new LDR
treatment standards for metal-bearing and mineral processing wastes are
being promulgated pursuant to section 3004 (g)(4) and (m), provisions
added by HSWA. (Note, however, that the treatment standards, even
though they are promulgated pursuant to HSWA, will not apply to mineral
processing wastes unless the wastes are currently included in the
authorized State's
[[Page 28635]]
definition of solid waste.) The application of the TCLP to mineral
processing wastes likewise implements a HSWA provision, section
3001(g). These requirements are being added to Table 1 in 40 CFR
271.1(j), which identifies the Federal program requirements that are
promulgated pursuant to HSWA, and would take effect in all States,
regardless of authorization status. States may apply for final or
interim authorization for the HSWA provisions in Table 1, as discussed
in the following section of this preamble. Table 2 in 40 CFR 271.1(j)
is also modified to indicate those provisions of this rule that are
self-implementing provisions of HSWA. Note that there are other HSWA
provisions that are not more stringent than the current program, such
as the revisions to certain of the existing LDR treatment standards.
These would not be implemented by EPA in those states authorized for
the existing provisions prior to a State being authorized for them.
These provisions are further discussed below.
Today's rule contains provisions, both under HSWA and non-HSWA
authority, that are less stringent than the current Federal program.
First is the non-HSWA provision which would allow mineral processing
spent materials being reclaimed within the mineral processing industry
sector, or in beneficiation processes, to be excluded from the
definition of solid waste. This provision can be adopted at the States'
option, although EPA strongly encourages States to adopt this
provision. As stated earlier in the preamble, part of the purpose of
this rule is to eliminate distinctions among reclaimed spent materials,
by-products, and sludges within this industry. This change, in
combination with the conditioned exclusion for the reclaimed byproducts
and sludges, will result in more control over land-based mineral
processing units than exists presently, encourage additional material
recovery within the industry, properly control land-based storage of
mineral processing industry secondary materials awaiting intra-industry
recovery, and also simplify the solid waste regulatory classification
scheme. In addition, State adoption of these provisions will provide
national consistency.
Similarly, another less stringent non-HSWA provision in this rule
excludes from RCRA regulation certain recycled wood preserving
wastewaters and spent wood preserving solutions. The exclusion will not
be effective in authorized States until they amend their regulations
and received authorization. Although the States do not have to adopt
these provisions, EPA strongly encourage them to do so, because the
exclusion encourages properly conducted material recovery in the wood
preserving industry.
Last, the treatment standards for soil contaminated with hazardous
waste (and the associated site-specific risk based variance provision
for contaminated soils), promulgated under HSWA, are less stringent
than the existing treatment standards. Although the authority for these
standards is under HSWA, EPA will not implement them in those States
that are authorized for the existing standards because they are less
stringent. EPA will implement them in those States that are
unauthorized for the applicable existing treatment standards. However,
EPA strongly encourages States to seek authorization for these
standards in order to encourage and speed up cleanups of contaminated
sites based on remedies involving treatment of contaminated soils, thus
providing more permanent remedial solutions.
Some of today's regulatory amendments are neither more or less
stringent than the existing Federal requirements. These are the
revisions to the existing UTS numbers. EPA clarified in a December 19,
1994, memorandum (which is in the docket for today's rule) that EPA
would not implement the Universal Treatment Standards (promulgated
under HSWA authority in the Phase II LDR rule) separately for those
States for which the State has received LDR authorization. EPA views
changes from the existing limits to be neither more or less stringent
since the technology basis of the standards has not changed.
Accordingly, EPA will not implement today's amendments to the UTS in
those States with authorization for the treatment standards.
Today's rule also clarifies the scrap metal exemption from solid
waste as it applies to whole circuit boards. This part of the preamble
simply clarifies the Agency's interpretation of the existing rules. If
authorized for the scrap metal exemption, States do not need further
authorization to interpret their rules in conformity with this
interpretation.
C. Authorization Procedures
Because portions of today's rule are promulgated pursuant to HSWA,
a State submitting a program modification for those portions may apply
to receive interim authorization under RCRA section 3006(g)(2) or final
authorization under RCRA section 3006(b), on the basis of requirements
that are, respectively, substantially equivalent or equivalent to
EPA's. For program modifications for the non-HSWA portions of this
rule, States can received final authorization only. The procedures and
schedule for final authorization of State program modifications are
described in 40 CFR 271.21. It should be noted that all HSWA interim
authorizations will expire January 1, 2003. (See 40 CFR 271.24(c) and
57 FR 60132, December 18, 1992.)
Section 271.21(e)(2) requires that States with final authorization
modify their programs to reflect Federal program changes and
subsequently submit the modification to EPA for approval. The deadline
by which the State would have to modify its program to adopt these
regulations is specified in section 271.21(e). This deadline can be
extended in certain cases (see section 271.21(e)(3)). Once EPA approves
the modification, the State requirements become Subtitle C RCRA
requirements.
States with authorized RCRA programs may already have requirements
similar to those in today's rule. These State regulations have not been
assessed against the Federal regulations being promulgated today to
determine whether they meet the tests for authorization. Thus, a State
is not authorized to implement these requirements in lieu of EPA until
the State program modifications are approved. Of course, States with
existing standards could continue to administer and enforce their
standards as a matter of State law. In implementing the Federal
program, EPA will work with States under agreements to minimize
duplication of efforts.
D. Streamlined Authorization Procedures
It is EPA's policy to provide as much flexibility as possible to
encourage States to become authorized for rules under the hazardous
waste program. EPA discussed an expedited authorization approach in the
proposed Phase IV LDR rule (60 FR 43688, August 22, 1995), and the
supplemental proposal (61 FR 2338, January 25, 1996). EPA also
discussed streamlined authorization procedures in a more comprehensive
fashion in the proposed HWIR-media rule (61 FR 18780, April 29, 1996).
This expedited approach would apply to those minor or routine changes
to the existing program that do not expand the scope of the program in
significant ways, and was called Category 1. EPA has decided to address
this proposed authorization procedure in the upcoming HWIR-Media rule
rather than here, so that the expedited authorization approaches can be
dealt with in a comprehensive manner.
[[Page 28636]]
XV. Submission to Congress and General Accounting Office
The Congressional Review Act, 5 U.S.C. Sec. 801 et seq., as added
by the Small Business Regulatory Enforcement Fairness Act of 1996,
generally provides that before a rule may take effect, the agency
promulgating the rule must submit a rule report, which includes a copy
of the rule, to each House of the Congress and to the Comptroller
General of the United States. EPA will submit a report containing this
rule and other required information to the U.S. Senate, the U.S. House
of Representatives, and the Comptroller General of the United States
prior to publication of the rule in the Federal Register. This rule is
not a ``major rule'' as defined by 5 U.S.C. Sec. 804(2).
XVI. Executive Order 13045: Protection of Children From
Environmental Health Risks and Safety Risks
Executive Order 13045: The Executive Order 13045 applies to any
rule that EPA determines (1) ``economically significant'' as defined
under Executive Order 12866, and (2) the environmental health or safety
risk addressed by the rule has a disproportionate effect on children.
If the regulatory action meets both criteria, the Agency must evaluate
the environmental health or safety effects of the planned rule on
children, and explain why the planned regulation is preferable to other
potentially effective and reasonably feasible alternatives considered
by the Agency.
This final rule is not subject to E.O. 13045, entitled ``Protection
of Children from Environmental Health Risks and Safety Risks
(62FR19885, April 23, 1997), because this is not an economically
significant regulatory action as defined by E.O. 12866.
XVII. National Technology Transfer and Advancement Act
Under Sec. 12(d) of the National Technology Transfer and
Advancement Act, the Agency is directed to use voluntary consensus
standards in its regulatory activities unless to do so would be
inconsistent with applicable law or otherwise impractical. Voluntary
consensus standards are technical standards (e.g., materials
specifications, test methods, sampling procedures, business practices,
etc.) that are developed or adopted by voluntary consensus standard
bodies. Where available and potentially applicable voluntary consensus
standards are not used by EPA, the Act requires the Agency to provide
Congress, through the Office of Management and Budget, an explanation
of the reasons for not using such standards.
EPA is not proposing any new test methods or other technical
standards as part of today's final rule. Thus, the Agency has no need
to consider the use of voluntary consensus standards in developing this
proposed rule.
List of Subjects
40 CFR Part 148
Administrative practice and procedure, Hazardous waste, Reporting
and recordkeeping requirements, Water supply.
40 CFR Part 261
Environmental protection, Hazardous waste, Recycling, Reporting and
recordkeeping requirements.
40 CFR Part 266
Energy, Hazardous waste, Recycling, Reporting and recordkeeping
requirements.
40 CFR Part 268
Hazardous waste, Reporting and recordkeeping requirements.
40 CFR Part 271
Administrative practice and procedure, Hazardous materials
transportation, Hazardous waste, Penalties, Reporting and recordkeeping
requirements.
Dated: April 30, 1998.
Carol M. Browner,
Administrator.
For the reasons set out in the preamble, Title 40, chapter I of the
Code of Federal Regulations is amended as follows:
PART 148--HAZARDOUS WASTE INJECTION RESTRICTIONS
1. The authority citation for Part 148 continues to read as
follows:
Authority: Secs. 3004, Resource Conservation and Recovery Act,
42 U.S.C. 6901, et seq.
2. Section 148.18 is amended by redesignating paragraphs (a)
through (f) as (c) through (h) respectively, and by adding paragraphs
(a) and (b) to read as follows:
Sec. 148.18 Waste specific prohibitions--newly listed and identified
wastes.
(a) Effective August 24, 1998, all newly identified D004-D011
wastes and characteristic mineral processing wastes, except those
identified in paragraph (b) of this section, are prohibited from
underground injection.
(b) Effective May 26, 2000, characteristic hazardous wastes from
titanium dioxide mineral processing, and radioactive wastes mixed with
newly identified D004-D011 or mixed with newly identified
characteristic mineral processing wastes, are prohibited from
underground injection.
* * * * *
PART 261--IDENTIFICATION AND LISTING OF HAZARDOUS WASTE
Subpart A--General
3. The authority citation for Part 261 continues to read as
follows:
Authority: 42 U.S.C. 6905, 6912(a), 6921, 6922, 6924(y), and
6938.
4. Section 261.2 is amended by revising Table 1 in paragraph
(c)(4), paragraph (c)(3) and (e)(1)(iii) to read as follows:
Sec. 261.2 Definition of solid waste.
* * * * *
(c) * * *
(3) Reclaimed. Materials noted with a ``*'' in column 3 of Table 1
are solid wastes when reclaimed (except as provided under 40 CFR
261.4(a)(15)). Materials noted with a ``--'' in column 3 of Table 1 are
not solid wastes when reclaimed (except as provided under 40 CFR
261.4(a)(15)).
* * * * *
(4) * * *
[[Page 28637]]
Table 1
----------------------------------------------------------------------------------------------------------------
Reclamation (Sec.
261.2(c)(3))
(except as
Use constituting Energy recovery/ provided in Speculative
disposal (Sec. fuel (Sec. 261.4(a)(15) for accumulation (Sec.
261.2(c)(1)) 261.2(c)(2)) mineral processing 261.2(c)(4))
secondary
materials)
----------------------------------------------------------------------------------------------------------------
1 2 3 4
----------------------------------------------------------------------------------------------------------------
Spent Materials................. (*) (*) (*) (*)
Sludges (listed in 40 CFR Part
261.31 or 261.32............... (*) (*) (*) (*)
Sludges exhibiting a
characteristic of hazardous
waste.......................... (*) (*) -- (*)
By-products (listed in 40 CFR
261.31 or 261.32).............. (*) (*) (*) (*)
By-products exhibiting a
characteristic of hazardous
waste.......................... (*) (*) -- (*)
Commercial chemical products
listed in 40 CFR 261.33........ (*) (*) -- --
Scrap metal other than excluded
scrap metal (see 261.1(c)(9)).. (*) (*) (*) (*)
----------------------------------------------------------------------------------------------------------------
Note: The terms ``spent materials,'' ``sludges,'' ``by-products,'' and ``scrap metal'' and ``processed scrap
metal'' are defined in Sec. 261.1.
* * * * *
(e) * * *
(1) * * *
(iii) In cases where the materials are generated and reclaimed
within the primary mineral processing industry, the conditions of the
exclusion found at Sec. 261.4(a)(15) apply rather than this provision.
* * * * *
5. Section 261.3 is amended by revising paragraphs (a)(2)(i) and
(a)(2)(iii) to read as follows:
Sec. 261.3 Definition of hazardous waste.
(a) * * *
(2) * * *
(i) It exhibits any of the characteristics of hazardous waste
identified in subpart C of this part. However, any mixture of a waste
from the extraction, beneficiation, and processing of ores and minerals
excluded under Sec. 261.4(b)(7) and any other solid waste exhibiting a
characteristic of hazardous waste under subpart C is a hazardous waste
only if it exhibits a characteristic that would not have been exhibited
by the excluded waste alone if such mixture had not occurred, or if it
continues to exhibit any of the characteristics exhibited by the non-
excluded wastes prior to mixture. Further, for the purposes of applying
the Toxicity Characteristic to such mixtures, the mixture is also a
hazardous waste if it exceeds the maximum concentration for any
contaminant listed in table I to Sec. 261.24 that would not have been
exceeded by the excluded waste alone if the mixture had not occurred or
if it continues to exceed the maximum concentration for any contaminant
exceeded by the nonexempt waste prior to mixture.
* * * * *
(iii) It is a mixture of a solid waste and a hazardous waste that
is listed in subpart D of this part solely because it exhibits one or
more of the characteristics of hazardous waste identified in subpart C
of this part, unless the resultant mixture no longer exhibits any
characteristic of hazardous waste identified in subpart C of this part,
or unless the solid waste is excluded from regulation under
Sec. 261.4(b)(7) and the resultant mixture no longer exhibits any
characteristic of hazardous waste identified in subpart C of this part
for which the hazardous waste listed in subpart D of this part was
listed. (However, nonwastewater mixtures are still subject to the
requirements of part 268 of this chapter, even if they no longer
exhibit a characteristic at the point of land disposal).
* * * * *
6. Section 261.4 is amended by adding paragraphs (a)(9)(iii) and
(a)(16) and by revising paragraph (b)(7) to read as follows:
Sec. 261.4 Exclusions.
(a) * * *
(9) * * *
(iii) Prior to reuse, the wood preserving wastewaters and spent
wood preserving solutions described in paragraphs (a)(9)(i) and
(a)(9)(ii) of this section, so long as they meet all of the following
conditions:
(A) The wood preserving wastewaters and spent wood preserving
solutions are reused on-site at water borne plants in the production
process for their original intended purpose;
(B) Prior to reuse, the wastewaters and spent wood preserving
solutions are managed to prevent release to either land or groundwater
or both;
(C) Any unit used to manage wastewaters and/or spent wood
preserving solutions prior to reuse can be visually or otherwise
determined to prevent such releases;
(D) Any drip pad used to manage the wastewaters and/or spent wood
preserving solutions prior to reuse complies with the standards in part
265, subpart W of this chapter, regardless of whether the plant
generates a total of less than 100 kg/month of hazardous waste; and
(E) Prior to operating pursuant to this exclusion, the plant owner
or operator submits to the appropriate Regional Administrator or State
Director a one-time notification stating that the plant intends to
claim the exclusion, giving the date on which the plant intends to
begin operating under the exclusion, and containing the following
language: ``I have read the applicable regulation establishing an
exclusion for wood preserving wastewaters and spent wood preserving
solutions and understand it requires me to comply at all times with the
conditions set out in the regulation.'' The plant must maintain a copy
of that document in its on-site records for a period of no less than 3
years from the date specified in the notice. The exclusion applies only
so long as the plant meets all of the conditions. If the plant goes out
of compliance with any condition, it may apply to the appropriate
Regional Administrator or State Director for reinstatement. The
Regional Administrator or State Director may reinstate the exclusion
upon finding that the plant has returned to compliance with all
conditions and that violations are not likely to recur.
* * * * *
(16) Secondary materials (i.e., sludges, by-products, and spent
materials as defined in Sec. 261.1) (other than
[[Page 28638]]
hazardous wastes listed in subpart D of this part) generated within the
primary mineral processing industry from which minerals, acids,
cyanide, water or other values are recovered by mineral processing,
provided that:
(i) The secondary material is legitimately recycled to recover
minerals, acids, cyanide, water or other values;
(ii) The secondary material is not accumulated speculatively;
(iii) Except as provided in paragraph (a)(15)(iv) of this section,
the secondary material is stored in tanks, containers, or buildings
meeting the following minimum integrity standards: a building must be
an engineered structure with a floor, walls, and a roof all of which
are made of non-earthen materials providing structural support (except
smelter buildings may have partially earthen floors provided the
secondary material is stored on the non-earthen portion), and have a
roof suitable for diverting rainwater away from the foundation; a tank
must be free standing, not be a surface impoundment (as defined in 40
CFR 260.10), and be manufactured of a material suitable for containment
of its contents; a container must be free standing and be manufactured
of a material suitable for containment of its contents. If tanks or
containers contain any particulate which may be subject to wind
dispersal, the owner/operator must operate these units in a manner
which controls fugitive dust. Tanks, containers, and buildings must be
designed, constructed and operated to prevent significant releases to
the environment of these materials.
(iv) The Regional Administrator or the State Director may make a
site-specific determination, after public review and comment, that only
solid mineral processing secondary materials may be placed on pads,
rather than in tanks, containers, or buildings. Solid mineral
processing secondary materials do not contain any free liquid. The
decision-maker must affirm that pads are designed, constructed and
operated to prevent significant releases of the secondary material into
the environment. Pads must provide the same degree of containment
afforded by the non-RCRA tanks, containers and buildings eligible for
exclusion.
(A) The decision-maker must also consider if storage on pads poses
the potential for significant releases via groundwater, surface water,
and air exposure pathways. Factors to be considered for assessing the
groundwater, surface water, air exposure pathways are: the volume and
physical and chemical properties of the secondary material, including
its potential for migration off the pad; the potential for human or
environmental exposure to hazardous constituents migrating from the pad
via each exposure pathway, and the possibility and extent of harm to
human and environmental receptors via each exposure pathway.
(B) Pads must meet the following minimum standards: be designed of
non-earthen material that is compatible with the chemical nature of the
mineral processing secondary material, capable of withstanding physical
stresses associated with placement and removal, have run on/runoff
controls, be operated in a manner which controls fugitive dust, and
have integrity assurance through inspections and maintenance programs.
(C) Before making a determination under this paragraph, the
Regional Administrator or State Director must provide notice and the
opportunity for comment to all persons potentially interested in the
determination. This can be accomplished by placing notice of this
action in major local newspapers, or broadcasting notice over local
radio stations.
(v) The owner or operator provides a notice to the Regional
Administrator or State Director, identifying the following information:
the types of materials to be recycled; the type and location of the
storage units and recycling processes; and the annual quantities
expected to be placed in land-based units. This notification must be
updated when there is a change in the type of materials recycled or the
location of the recycling process.
(vi) For purposes of Sec. 261.4(b)(7), mineral processing secondary
materials must be the result of mineral processing and may not include
any listed hazardous wastes. Listed hazardous wastes and characteristic
hazardous wastes generated by non-mineral processing industries are not
eligible for the conditional exclusion from the definition of solid
waste.
(b) * * *
(7) Solid waste from the extraction, beneficiation, and processing
of ores and minerals (including coal, phosphate rock, and overburden
from the mining of uranium ore), except as provided by Sec. 266.112 of
this chapter for facilities that burn or process hazardous waste.
(i) For purposes of Sec. 261.4(b)(7) beneficiation of ores and
minerals is restricted to the following activities; crushing; grinding;
washing; dissolution; crystallization; filtration; sorting; sizing;
drying; sintering; pelletizing; briquetting; calcining to remove water
and/or carbon dioxide; roasting, autoclaving, and/or chlorination in
preparation for leaching (except where the roasting (and/or autoclaving
and/or chlorination)/leaching sequence produces a final or intermediate
product that does not undergo further beneficiation or processing);
gravity concentration; magnetic separation; electrostatic separation;
flotation; ion exchange; solvent extraction; electrowinning;
precipitation; amalgamation; and heap, dump, vat, tank, and in situ
leaching.
(ii) For the purposes of Sec. 261.4(b)(7), solid waste from the
processing of ores and minerals includes only the following wastes as
generated:
(A) Slag from primary copper processing;
(B) Slag from primary lead processing;
(C) Red and brown muds from bauxite refining;
(D) Phosphogypsum from phosphoric acid production;
(E) Slag from elemental phosphorus production;
(F) Gasifier ash from coal gasification;
(G) Process wastewater from coal gasification;
(H) Calcium sulfate wastewater treatment plant sludge from primary
copper processing;
(I) Slag tailings from primary copper processing;
(J) Fluorogypsum from hydrofluoric acid production;
(K) Process wastewater from hydrofluoric acid production;
(L) Air pollution control dust/sludge from iron blast furnaces;
(M) Iron blast furnace slag;
(N) Treated residue from roasting/leaching of chrome ore;
(O) Process wastewater from primary magnesium processing by the
anhydrous process;
(P) Process wastewater from phosphoric acid production;
(Q) Basic oxygen furnace and open hearth furnace air pollution
control dust/sludge from carbon steel production;
(R) Basic oxygen furnace and open hearth furnace slag from carbon
steel production;
(S ) Chloride process waste solids from titanium tetrachloride
production;
(T) Slag from primary zinc processing.
(iii) A residue derived from co-processing mineral processing
secondary materials with normal beneficiation raw materials remains
excluded under paragraph (b) of this section if the owner or operator:
(A) Processes at least 50 percent by weight normal beneficiation
raw materials; and,
(B) Legitimately reclaims the secondary mineral processing
materials.
* * * * *
[[Page 28639]]
PART 268--LAND DISPOSAL RESTRICTIONS
7. The authority citation for Part 268 continues to read as
follows:
Authority: 42 U.S.C. 6905, 6912(a), 6921, and 6924.
8. Section 268.2 is amended by revising paragraph (i) and adding
paragraph (k) to read as follows:
Sec. 268.2 Definitions applicable in this part.
* * * * *
(i) Underlying hazardous constituent means any constituent listed
in Sec. 268.48, Table UTS--Universal Treatment Standards, except
fluoride, selenium, sulfides, vanadium, and zinc, which can reasonably
be expected to be present at the point of generation of the hazardous
waste at a concentration above the constituent-specific UTS treatment
standards.
* * * * *
(k) Soil means unconsolidated earth material composing the
superficial geologic strata (material overlying bedrock), consisting of
clay, silt, sand, or gravel size particles as classified by the U.S.
Soil Conservation Service, or a mixture of such materials with liquids,
sludges or solids which is inseparable by simple mechanical removal
processes and is made up primarily of soil by volume based on visual
inspection.
9. Section 268.3 is amended by adding paragraph (d) to read as
follows:
Sec. 268.3 Dilution prohibited as a substitute for treatment.
* * * * *
(d) It is a form of impermissible dilution, and therefore
prohibited, to add iron filings or other metallic forms of iron to
lead-containing hazardous wastes in order to achieve any land disposal
restriction treatment standard for lead. Lead-containing wastes include
D008 wastes (wastes exhibiting a characteristic due to the presence of
lead), all characteristic wastes containing lead as an underlying
hazardous constituent, listed wastes containing lead as a regulated
constitutent, and hazardous media containing any of the aforementioned
lead-containing wastes.
10. Section 268.4 is amended by revising paragraphs (a)(2)(ii) and
(a)(2)(iii) to read as follows:
Sec. 268.4 Treatment surface impoundment exemption.
(a) * * *
(2) * * *
(ii) Removal. The following treatment residues (including any
liquid waste) must be removed at least annually; residues which do not
meet the treatment standards promulgated under subpart D of this part;
residues which do not meet the prohibition levels established under
subpart C of this part or imposed by statute (where no treatment
standards have been established); residues which are from the treatment
of wastes prohibited from land disposal under subpart C of this part
(where no treatment standards have been established and no prohibition
levels apply); or residues from managing listed wastes which are not
delisted under Sec. 260.22 of this chapter. If the volume of liquid
flowing through the impoundment or series of impoundments annually is
greater than the volume of the impoundment or impoundments, this flow-
through constitutes removal of the supernatant for the purpose of this
requirement.
(iii) Subsequent management. Treatment residues may not be placed
in any other surface impoundment for subsequent management.
* * * * *
11. Section 268.7 is amended by revising paragraphs (a)(1),
(a)(3)(ii), (a)(7), (b)(1), (b)(2), (b)(5) and (b)(6); by revising the
first sentence of the paragraphs (a)(2), (a)(3) introductory text,
(a)(4), (a)(5) introductory text, (a)(6), and (b)(3) introductory text;
by adding paragraph (a)(2)(i) and three sentences to the end of
paragraph (b)(4) introductory text and adding paragraphs (b)(4)(iv),
(b)(4)(v), and (e) and adding and reserving paragraph (a)(2)(ii); and
by revising entries 1 and 3, designating entry 8 as 9, and adding entry
8 in the table entitled ``Generator Paperwork Requirements Table'' in
paragraph (a)(4), and by revising entries 1 and 2 designating entry 5
as 6, and adding entry 5 in the table entitled ``Treatment Facility
Paperwork Requirements Table'' in paragraph (b)(3)(ii) to read as
follows:
Sec. 268.7 Testing, tracking, and recordkeeping requirements for
generators, treaters, and disposal facilities.
(a) * * *
(1) A generator of hazardous waste must determine if the waste has
to be treated before it can be land disposed. This is done by
determining if the hazardous waste meets the treatment standards in
Sec. 268.40, Sec. 268.45, or Sec. 268.49. This determination can be
made in either of two ways: testing the waste or using knowledge of the
waste. If the generator tests the waste, testing would normally
determine the total concentration of hazardous constituents, or the
concentration of hazardous constituents in an extract of the waste
obtained using test method 1311 in ``Test Methods of Evaluating Solid
Waste, Physical/Chemical Methods,'' EPA Publication SW-846, as
referenced in Sec. 260.11 of this chapter, depending on whether the
treatment standard for the waste is expressed as a total concentration
or concentration of hazardous constituent in the waste's extract. In
addition, some hazardous wastes must be treated by particular treatment
methods before they can be land disposed and some soils are
contaminated by such hazardous wastes. These treatment standards are
also found in Sec. 268.40, and are described in detail in Sec. 268.42,
Table 1. These wastes, and soils contaminated with such wastes, do not
need to be tested (however, if they are in a waste mixture, other
wastes with concentration level treatment standards would have to be
tested). If a generator determines they are managing a waste or soil
contaminated with a waste, that displays a hazardous characteristic of
ignitability, corrosivity, reactivity, or toxicity, they must comply
with the special requirements of Sec. 268.9 of this part in addition to
any applicable requirements in this section.
(2) If the waste or contaminated soil does not meet the treatment
standard: With the initial shipment of waste to each treatment or
storage facility, the generator must send a one-time written notice to
each treatment or storage facility receiving the waste, and place a
copy in the file. * * *
(i) For contaminated soil, the following certification statement
should be included, signed by an authorized representative:
I certify under penalty of law that I personally have examined this
contaminated soil and it [does/does not] contain listed hazardous waste
and [does/does not] exhibit a characteristic of hazardous waste and
requires treatment to meet the soil treatment standards as provided by
268.49(c).
(ii) [Reserved]
(3) If the waste or contaminated soil meets the treatment standard
at the original point of generation:
* * * * *
(ii) For contaminated soil, with the initial shipment of wastes to
each treatment, storage, or disposal facility, the generator must send
a one-time written notice to each facility receiving the waste and
place a copy in the file. The notice must include the information in
``268.7(a)(3) of the Generator Paperwork Requirements Table in
Sec. 268.7(a)(4).
(4) For reporting, tracking, and recordkeeping when exceptions
allow certain wastes or contaminated soil that
[[Page 28640]]
do not meet the treatment standards to be land disposed: There are
certain exemptions from the requirement that hazardous wastes or
contaminated soil meet treatment standards before they can be land
disposed. * * *
* * * * *
Generator Paperwork Requirements Table
----------------------------------------------------------------------------------------------------------------
Sec. 268.7 Sec. 268.7 Sec. 268.7 Sec. 268.7
Required information (a)(2) (a)(3) (a)(4) (a)(9)
----------------------------------------------------------------------------------------------------------------
1. EPA Hazardous Waste Numbers and Manifest Number of
first shipment.
* * * * * *
*
3. The waste is subject to the LDRs. The constituents of
concern for F001-F005, and F039, and underlying
hazardous constituents in characteristic wastes, unless
the waste will be treated and monitored for all
constituents. If all constituents will be treated and
monitored, there is no need to put them all on the LDR
notice................................................. ............ ............ ............
* * * * * *
*
8. For contaminated soil subject to LDRs as provided in
268.49(a), the constituents subject to treatment as
described in 268.49(d), and the following statement:
This contaminated soil [does/does not] contain listed
hazardous waste and [does/does not] exhibit a
characteristic of hazardous waste and [is subject to/
complies with' the soil treatment standards as provided
by 268.49(c) or the universal treatment standards...... ............ ............ ............
* * * * * *
*
----------------------------------------------------------------------------------------------------------------
(5) If a generator is managing and treating prohibited waste or
contaminated soil in tanks, containers, or containment buildings
regulated under 40 CFR 262.34 to meet applicable LDR treatment
standards found at Sec. 268.40, the generator must develop and follow a
written waste analysis plan which describes the procedures they will
carry out to comply with the treatment standards. * * *
* * * * *
(6) If a generator determines that the waste or contaminated soil
is restricted based solely on his knowledge of the waste, all
supporting data used to make this determination must be retained on-
site in the generator's files. * * *
(7) If a generator determines that he is managing a prohibited
waste that is excluded from the definition of hazardous or solid waste
or is exempted from Subtitle C regulation under 40 CFR 261.2 through
261.6 subsequent to the point of generation (including deactivated
characteristic hazardous wastes managed in wastewater treatment systems
subject to the Clean Water Act (CWA) as specified at 40 CFR 261.4(a)(2)
or that are CWA-equivalent, or are managed in an underground injection
well regulated by the SDWA), he must place a one-time notice describing
such generation, subsequent exclusion from the definition of hazardous
or solid waste or exemption from RCRA Subtitle C regulation, and the
disposition of the waste, in the facility's on-site files.
* * * * *
(b) * * *
(1) For wastes or contaminated soil with treatment standards
expressed in the waste extract (TCLP), the owner or operator of the
treatment facility must test an extract of the treatment residues,
using test method 1311 (the Toxicity Characteristic Leaching Procedure,
described in ``Test Methods for Evaluating Solid Waste, Physical/
Chemical Methods,'' EPA Publication SW-846 as incorporated by reference
in Sec. 260.11 of this chapter) to assure that the treatment residues
extract meet the applicable treatment standards.
(2) For wastes or contaminated soil with treatment standards
expressed as concentrations in the waste, the owner or operator of the
treatment facility must test the treatment residues (not an extract of
such residues) to assure that they meet the applicable treatment
standards.
(3) A one-time notice must be sent with the initial shipment of
waste or contaminated soil to the land disposal facility. * * *
* * * * *
(ii) * * *
Treatment Facility Paperwork Requirements Table
------------------------------------------------------------------------
Required information Sec.
--------------------------------------------------------------268.7(b)--
1. EPA Hazardous Waste Numbers and Manifest Number of
first shipment.
2. The waste is subject to the LDRs. The constituents of
concern for F001-F005, and F039, and underlying
hazardous constituents in characteristic wastes, unless
the waste will be treated and monitored for all
constituents. If all constituents will be treated and
monitored, there is no need to put them all on the LDR
notice..................................................
* * * *
* * *
5. For contaminated soil subject to LDRs as provided in
268.49(a), the constituents subject to treatment as
described in 268.49(d) and the following statement,
``this contaminated soil [does/does not] contain listed
hazardous waste and [does/does not] exhibit
acharacteristic of hazardous waste and [is subject to/
complies with] the soil treatment standards as provided
by 268.49(c)............................................
* * * *
* * *
------------------------------------------------------------------------
(4) * * * A certification is also necessary for contaminated soil
and it must state:
I certify under penalty of law that I have personally examined
and am familiar with the treatment technology and operation of the
treatment process used to support this certification and believe
that it has been maintained and operated properly so as to
[[Page 28641]]
comply with treatment standards specified in 40 CFR 268.49 without
impermissible dilution of the prohibited wastes. I am aware there
are significant penalties for submitting a false certification,
including the possibility of fine and imprisonment.
* * * * *
(iv) For characteristic wastes that are subject to the treatment
standards in Sec. 268.40 (other than those expressed as a required
method of treatment) that are reasonably expected to contain underlying
hazardous constituents as defined in Sec. 268.2(i); are treated on-site
to remove the hazardous characteristic; and are then sent off-site for
treatment of underlying hazardous constituents, the certification must
state the following:
I certify under penalty of law that the waste has been treated
in accordance with the requirements of 40 CFR 268.40 to remove the
hazardous characteristic. This decharacterized waste contains
underlying hazardous constituents that require further treatment to
meet universal treatment standards. I am aware that there are
significant penalties for submitting a false certification,
including the possibility of fine and imprisonment.
(v) For characteristic wastes that contain underlying hazardous
constituents as defined Sec. 268.2(i) that are treated on-site to
remove the hazardous characteristic to treat underlying hazardous
constituents to levels in Sec. 268.48 Universal Treatment Standards,
the certification must state the following:
I certify under penalty of law that the waste has been treated
in accordance with the requirements of 40 CFR 268.40 to remove the
hazardous characteristic and that underlying hazardous constituents,
as defined in Sec. 268.2(i) have been treated on-site to meet the
Sec. 268.48 Universal Treatment Standards. I am aware that there are
significant penalties for submitting a false certification,
including the possibility of fine and imprisonment.
(5) If the waste or treatment residue will be further managed at a
different treatment, storage, or disposal facility, the treatment,
storage, or disposal facility sending the waste or treatment residue
off-site must comply with the notice and certification requirements
applicable to generators under this section.
(6) Where the wastes are recyclable materials used in a manner
constituting disposal subject to the provisions of Sec. 268.20(b)
regarding treatment standards and prohibition levels, the owner or
operator of a treatment facility (i.e., the recycler) is not required
to notify the receiving facility, pursuant to paragraph (b)(3) of this
section. With each shipment of such wastes the owner or operator of the
recycling facility must submit a certification described in paragraph
(b)(4) of this section, and a notice which includes the information
listed in paragraph (b)(3) of this section (except the manifest number)
to the Regional Administrator, or his delegated representative. The
recycling facility also must keep records of the name and location of
each entity receiving the hazardous waste-derived product.
* * * * *
(e) Generators and treaters who first receive from EPA or an
authorized state a determination that a given contaminated soil subject
to LDRs as provided in Sec. 268.49(a) no longer contains a listed
hazardous waste and generators and treaters who first determine that a
contaminated soil subject to LDRs as provided in Sec. 268.49(a) no
longer exhibits a characteristic of hazardous waste must:
(1) Prepare a one-time only documentation of these determinations
including all supporting information; and,
(2) Maintain that information in the facility files and other
records for a minimum of three years.
Subpart C--Prohibitions on Land Disposal
12. Section Sec. 268.34 is revised to read as follows:
Sec. 268.34 Waste specific prohibitions--toxicity characteristic metal
wastes.
(a) Effective August 24, 1998, the following wastes are prohibited
from land disposal: the wastes specified in 40 CFR Part 261 as EPA
Hazardous Waste numbers D004--D011 that are newly identified (i.e.
wastes, soil, or debris identified as hazardous by the Toxic
Characteristic Leaching Procedure but not the Extraction Procedure),
and waste, soil, or debris from mineral processing operations that is
identified as hazardous by the specifications at 40 CFR Part 261.
(b) Effective May 26, 2000, the following wastes are prohibited
from land disposal: newly identified characteristic wastes from
elemental phosphorus processing; radioactive wastes mixed with EPA
Hazardous wastes D004--D011 that are newly identified (i.e. wastes,
soil, or debris identified as hazardous by the Toxic Characteristic
Leaching Procedure but not the Extraction Procedure); or mixed with
newly identified characteristic mineral processing wastes, soil, or
debris.
(c) Between May 26, 1998 and May 26, 2000, newly identified
characteristic wastes from elemental phosphorus processing, radioactive
waste mixed with D004--D011 wastes that are newly identified (i.e.
wastes, soil, or debris identified as hazardous by the Toxic
Characteristic Leaching Procedure but not the Extraction Procedure), or
mixed with newly identified characteristic mineral processing wastes,
soil, or debris may be disposed in a landfill or surface impoundment
only if such unit is in compliance with the requirements specified in
Sec. 268.5(h)(2) of this part.
(d) The requirements of paragraphs (a) and (b) of this section do
not apply if:
(1) The wastes meet the applicable treatment standards specified in
subpart D of this part;
(2) Persons have been granted an exemption from a prohibition
pursuant to a petition under Sec. 268.6, with respect to those wastes
and units covered by the petition;
(3) The wastes meet the applicable alternate treatment standards
established pursuant to a petition granted under Sec. 268.44; or
(4) Persons have been granted an extension to the effective date of
a prohibition pursuant to Sec. 268.5, with respect to these wastes
covered by the extension.
(e) To determine whether a hazardous waste identified in this
section exceeds the applicable treatment standards specified in
Sec. 268.40, the initial generator must test a sample of the waste
extract or the entire waste, depending on whether the treatment
standards are expressed as concentrations in the waste extract or the
waste, or the generator may use knowledge of the waste. If the waste
contains constituents (including underlying hazardous constituents in
characteristic wastes) in excess of the applicable Universal Treatment
Standard levels of Sec. 268.48 of this part, the waste is prohibited
from land disposal, and all requirements of part 268 are applicable,
except as otherwise specified.
Subpart D--Treatment Standards
13. Section 268.40 is amended by revising paragraph (e), adding
paragraph (h), and revising the Table of Treatment Standards to read as
follows:
Sec. 268.40 Applicability of treatment standards.
* * * * *
(e) For characteristic wastes (D001--D043) that are subject to
treatment standards in the following table ``Treatment Standards for
Hazardous Wastes,'' and are not managed in a wastewater treatment
system that is regulated under the Clean Water Act (CWA), that is CWA-
equivalent, or that is injected into a Class I nonhazardous
[[Page 28642]]
deep injection well, all underlying hazardous constituents (as defined
in Sec. 268.2(i)) must meet Universal Treatment Standards, found in
Sec. 268.48, Table Universal Treatment Standards, prior to land
disposal as defined in Sec. 268.2(c) of this part.
* * * * *
(h) Prohibited D004-D011 mixed radioactive wastes and mixed
radioactive listed wastes containing metal constituents, that were
previously treated by stabilization to the treatment standards in
effect at that time and then put into storage, do not have to be re-
treated to meet treatment standards in this section prior to land
disposal.
BILLING CODE 6560-50-P
[[Page 28643]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.000
[[Page 28644]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.001
[[Page 28645]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.002
[[Page 28646]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.003
[[Page 28647]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.004
[[Page 28648]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.005
[[Page 28649]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.006
[[Page 28650]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.007
[[Page 28651]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.008
[[Page 28652]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.009
[[Page 28653]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.010
[[Page 28654]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.011
[[Page 28655]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.012
[[Page 28656]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.013
[[Page 28657]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.014
[[Page 28658]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.015
[[Page 28659]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.016
[[Page 28660]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.017
[[Page 28661]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.018
[[Page 28662]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.019
[[Page 28663]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.020
[[Page 28664]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.021
[[Page 28665]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.022
[[Page 28666]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.023
[[Page 28667]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.024
[[Page 28668]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.025
[[Page 28669]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.026
[[Page 28670]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.027
[[Page 28671]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.028
[[Page 28672]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.029
[[Page 28673]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.030
[[Page 28674]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.031
[[Page 28675]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.032
[[Page 28676]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.033
[[Page 28677]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.034
[[Page 28678]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.035
[[Page 28679]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.036
[[Page 28680]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.037
[[Page 28681]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.038
[[Page 28682]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.039
[[Page 28683]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.040
[[Page 28684]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.041
[[Page 28685]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.042
[[Page 28686]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.043
[[Page 28687]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.044
[[Page 28688]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.045
[[Page 28689]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.046
[[Page 28690]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.047
[[Page 28691]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.048
[[Page 28692]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.049
[[Page 28693]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.050
[[Page 28694]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.051
[[Page 28695]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.052
[[Page 28696]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.053
[[Page 28697]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.054
[[Page 28698]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.055
[[Page 28699]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.056
[[Page 28700]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.057
[[Page 28701]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.058
[[Page 28702]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.059
[[Page 28703]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.060
[[Page 28704]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.061
[[Page 28705]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.062
[[Page 28706]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.063
[[Page 28707]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.064
[[Page 28708]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.065
[[Page 28709]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.066
[[Page 28710]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.067
[[Page 28711]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.068
[[Page 28712]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.069
[[Page 28713]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.070
[[Page 28714]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.071
[[Page 28715]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.072
[[Page 28716]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.073
[[Page 28717]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.074
[[Page 28718]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.075
[[Page 28719]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.076
[[Page 28720]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.077
[[Page 28721]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.078
[[Page 28722]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.079
[[Page 28723]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.080
[[Page 28724]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.081
[[Page 28725]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.082
[[Page 28726]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.083
[[Page 28727]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.084
[[Page 28728]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.085
[[Page 28729]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.086
[[Page 28730]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.087
[[Page 28731]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.088
[[Page 28732]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.089
[[Page 28733]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.090
[[Page 28734]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.091
[[Page 28735]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.092
[[Page 28736]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.093
[[Page 28737]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.094
[[Page 28738]]
Footnotes to Treatment Standard Table 268.40
\1\ The waste descriptions provided in this table do not replace
waste descriptions in 40 CFR 261. Descriptions of Treatment/
Regulatory Subcategories are provided, as needed, to distinguish
between applicability of different standards.
\2\ CAS means Chemical Abstract Services. When the waste code
and/or regulated constituents are described as a combination of a
chemical with its salts and/or esters, the CAS number is given for
the parent compound only.
\3\ Concentration standards for wastewaters are expressed in mg/
l and are based on analysis of composite samples.
\4\ All treatment standards expressed as a Technology Code or
combination of Technology Codes are explained in detail in 40 CFR
268.42 Table 1--Technology Codes and Descriptions of Technology-
Based Standards.
\5\ Except for Metals (EP or TCLP) and Cyanides (Total and
Amenable) the nonwastewater treatment standards expressed as a
concentration were established, in part, based upon incineration in
units operated in accordance with the technical requirements of 40
CFR Part 264 Subpart O or Part 265 Subpart O, or based upon
combustion in fuel substitution units operating in accordance with
applicable technical requirements. A facility may comply with these
treatment standards according to provisions in 40 CFR 268.40(d). All
concentration standards for nonwastewaters are based on analysis of
grab samples.
\6\ Where an alternate treatment standard or set of alternate
standards has been indicated, a facility may comply with this
alternate standard, but only for the Treatment/Regulatory
Subcategory or physical form (i.e., wastewater and/or nonwastewater)
specified for that alternate standard.
\7\ Both Cyanides (Total) and Cyanides (Amenable) for
nonwastewaters are to be analyzed using Method 9010 or 9012, found
in ``Test Methods for Evaluating Solid Waste, Physical/Chemical
Methods,'' EPA Publication SW-846, as incorporated by reference in
40 CFR 260.11, with a sample size of 10 grams and a distillation
time of one hour and 15 minutes.
\8\ These wastes, when rendered nonhazardous and then
subsequently managed in CWA, or CWA-equivalent systems, are not
subject to treatment standards. (See Sec. 268.1(c) (3) and (4)).
\9\ These wastes, when rendered nonhazardous and then
subsequently injected in a Class I SDWA well, are not subject to
treatment standards. (See Sec. 148.1(d)).
\10\ Between August 26, 1996, and August 26, 1997, the treatment
standard for this waste may be satisfied by either meeting the
constituent concentrations in this table or by treating the waste by
the specified technologies: combustion, as defined by the technology
code CMBST at Sec. 268.42 Table 1 of this Part, for nonwastewaters;
and, biodegradation as definded by the technology code BIODG, carbon
adsorption as defined by the technology code CARBN, chemical
oxidation as defined by the technology code CHOXD, or combustion as
defined as technology code CMBST at Sec. 268.42 Table 1 of this
Part, for wastewaters.
\11\ For these wastes, the definition of CMBST is limited to:
(1) combustion units operating under 40 CFR 266, (2) combustion
units permitted under 40 CFR Part 264, Subpart O, or (3) combustion
units operating under 40 CFR 265, Subpart O, which have obtained a
determination of equivalent treatment under 268.42 (b).
14. Section 268.42 is amended by revising the introductory text of
paragraph (a) and removing paragraphs (a)(1), (a)(2), and (a)(3) to
read as follows:
Sec. 268.42 Treatment standards expressed as specified technologies.
(a) The following wastes in the table in Sec. 268.40 ``Treatment
Standards for Hazardous Wastes,'' for which standards are expressed as
a treatment method rather than a concentration level, must be treated
using the technology or technologies specified in the table entitled
``Technology Codes and Description of Technology-Based Standards'' in
this section.
* * * * *
15. Section 268.44 is amended by redesignating paragraph (h)(3) as
(h)(5), and adding new paragraphs (h) (3) and (4) to read as follows:
Sec. 268.44 Variance from a treatment standard.
* * * * *
(h) * * *
(3) For contaminated soil only, treatment to the level or by the
method specified in the soil treatment standards would result in
concentrations of hazardous constituents that are below (i.e., lower
than) the concentrations necessary to minimize short- and long-term
threats to human health and the environment. Treatment variances
approved under this paragraph must:
(i) At a minimum, impose alternative land disposal restriction
treatment standards that, using a reasonable maximum exposure scenario:
(A) For carcinogens, achieve constituent concentrations that result
in the total excess risk to an individual exposed over a lifetime
generally falling within a range from 10 -4 to 10
-6; and
(B) For constituents with non-carcinogenic effects, achieve
constituent concentrations that an individual could be exposed to on a
daily basis without appreciable risk of deleterious effect during a
lifetime.
(ii) Not consider post-land-disposal controls.
(4) For contaminated soil only, treatment to the level or by the
method specified in the soil treatment standards would result in
concentrations of hazardous constituents that are below (i.e., lower
than) natural background concentrations at the site where the
contaminated soil will land disposed.
* * * * *
16. Section 268.45 is amended by revising the introductory text of
paragraph (a), and paragraphs (d)(3) and (d)(4) to read as follows:
Sec. 268.45 Treatment standards for hazardous debris.
(a) Treatment standards. Hazardous debris must be treated prior to
land disposal as follows unless EPA determines under Sec. 261.3(f)(2)
of this chapter that the debris is no longer contaminated with
hazardous waste or the debris is treated to the waste-specific
treatment standard provided in this subpart for the waste contaminating
the debris:
* * * * *
(d) * * *
(3) Cyanide-reactive debris. Residue from the treatment of debris
that is reactive because of cyanide must meet the treatment standards
for D003 in ``Treatment Standards for Hazardous Wastes'' at
Sec. 268.40.
(4) Ignitable nonwastewater residue. Ignitable nonwastewater
residue containing equal to or greater than 10% total organic carbon is
subject to the technology specified in the treatment standard for D001:
Ignitable Liquids.
* * * * *
17. Section 268.48 is amended by revising the table Universal
Treatment Standards to read as follows:
Sec. 268.48 Universal treatment standards.
(a) * * *
[[Page 28739]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.095
[[Page 28740]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.096
[[Page 28741]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.097
[[Page 28742]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.098
[[Page 28743]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.099
[[Page 28744]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.100
[[Page 28745]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.101
[[Page 28746]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.102
[[Page 28747]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.103
[[Page 28748]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.104
[[Page 28749]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.105
[[Page 28750]]
[GRAPHIC] [TIFF OMITTED] TR26MY98.106
BILLING CODE 6560-50-C
[[Page 28751]]
18. Subpart D is amended by adding Sec. 268.49 to read as follows:
Sec. 268.49 Alternative LDR treatment standards for contaminated soil.
(a) Applicability. You must comply with LDRs prior to placing soil
that exhibits a characteristic of hazardous waste, or exhibited a
characteristic of hazardous waste at the time it was generated, into a
land disposal unit. The following chart describes whether you must
comply with LDRs prior to placing soil contaminated by listed hazardous
waste into a land disposal unit:
----------------------------------------------------------------------------------------------------------------
If LDRs And if LDRs And if Then you
----------------------------------------------------------------------------------------------------------------
Applied to the listed waste Apply to the .................. Must comply with LDRs
when it contaminated the soil*. listed waste now.
Didn't apply to the listed Apply to the The soil is Must comply with LDRs.
waste when it contaminated the listed waste now. determined to
soil*. contain the
listed waste when
the soil is first
generated.
Didn't apply to the listed Apply to the The soil is Needn't comply with LDRs.
waste when it contaminated the listed waste now. determined not to
soil*. contain the
listed waste when
the soil is first
generated.
Didn't apply to the listed Don't apply to the .................. Needn't comply with LDRs.
waste when it contaminated the listed waste now.
soil*.
----------------------------------------------------------------------------------------------------------------
* For dates of LDR applicability, see 40 CFR Part 268 Appendix VII. To determine the date any given listed
hazardous waste contaminated any given volume of soil, use the last date any given listed hazardous waste was
placed into any given land disposal unit or, in the case of an accidental spill, the date of the spill.
(b) Prior to land disposal, contaminated soil identified by
paragraph (a) of this section as needing to comply with LDRs must be
treated according to the applicable treatment standards specified in
paragraph (c) of this section or according to the Universal Treatment
Standards specified in 40 CFR 268.48 applicable to the contaminating
listed hazardous waste and/or the applicable characteristic of
hazardous waste if the soil is characteristic. The treatment standards
specified in paragraph (c) of this section and the Universal Treatment
Standards may be modified through a treatment variance approved in
accordance with 40 CFR 268.44.
(c) Treatment standards for contaminated soils. Prior to land
disposal, contaminated soil identified by paragraph (a) of this section
as needing to comply with LDRs must be treated according to all the
standards specified in this paragraph or according to the Universal
Treatment Standards specified in 40 CFR 268.48.
(1) All soils. Prior to land disposal, all constituents subject to
treatment must be treated as follows:
(A) For non-metals, treatment must achieve 90 percent reduction in
total constituent concentrations, except as provided by paragraph
(c)(1)(C) of this section.
(B) For metals, treatment must achieve 90 percent reduction in
constituent concentrations as measured in leachate from the treated
media (tested according to the TCLP) or 90 percent reduction in total
constituent concentrations (when a metal removal treatment technology
is used), except as provided by paragraph (c)(1)(C) of this section.
(C) When treatment of any constituent subject to treatment to a 90
percent reduction standard would result in a concentration less than 10
times the Universal Treatment Standard for that constituent, treatment
to achieve constituent concentrations less than 10 times the universal
treatment standard is not required. Universal Treatment Standards are
identified in 40 CFR 268.48 Table UTS.
(2) Soils that exhibit the characteristic of ignitability,
corrosivity or reactivity. In addition to the treatment required by
paragraph (c)(1) of this section, prior to land disposal, soils that
exhibit the characteristic of ignitability, corrosivity, or reactivity
must be treated to eliminate these characteristics.
(3) Soils that contain nonanalyzable constituents. In addition to
the treatment requirements of paragraphs (c)(1) and (2) of this
section, prior to land disposal, the following treatment is required
for soils that contain nonanalyzable constituents:
(A) For soil that also contains analyzable constituents, treatment
of those analyzable constituents to the levels specified in paragraphs
(c)(1) and (2) of this section; or,
(B) For soil that contains only nonanalyzable constituents,
treatment by the method specified in Sec. 268.42 for the waste
contained in the soil.
(d) Constituents subject to treatment. When applying the soil
treatment standards in paragraph (c) of this section, constituents
subject to treatment are any constituents listed in 40 CFR 268.48,
Table UTS--Universal Treatment Standards that are reasonably expected
to be present in any given volume of contaminated soil, except
fluoride, selenium, sulfides, vanadium and zinc, and are present at
concentrations greater than ten times the universal treatment standard.
(e) Management of treatment residuals. Treatment residuals from
treating contaminated soil identified by paragraph (a) of this section
as needing to comply with LDRs must be managed as follows:
(1) Soil residuals are subject to the treatment standards of this
section;
(2) Non-soil residuals are subject to:
(A) For soils contaminated by listed hazardous waste, the RCRA
Subtitle C standards applicable to the listed hazardous waste; and
(B) For soils that exhibit a characteristic of hazardous waste, if
the non-soil residual also exhibits a characteristic of hazardous
waste, the treatment standards applicable to the characteristic
hazardous waste.
19. Table 1 in Appendix VII to Part 268 is amended by removing the
entries for waste code F033; revising the second entry for waste code
F032, the second entry for F034, and the first entry for K088; revising
the entries for D003-D011 and two entries for waste code F035; and,
Table 2 is amended by revising entry number 9 and adding entries 12 and
13 to read as follows:
[[Page 28752]]
Table 1.--Effective Dates of Surface Disposed Wastes
[(Non-soil and Debris) Regulated in the LDRSa--Comprehensive List]
----------------------------------------------------------------------------------------------------------------
Waste code Waste category Effective date
----------------------------------------------------------------------------------------------------------------
* * * * * * *
D003.................................. Newly identified surface- May 26, 2000.
disposed elemental phosphorus
processing wastes.
D004.................................. Newly identified D004 and August 24, 1998.
mineral processing wastes.
D004.................................. Mixed radioactive/newly May 26, 2000.
identified D004 or mineral
processing wastes.
D005.................................. Newly identified D005 and August 24, 1998.
mineral processing wastes.
D005.................................. Mixed radioactive/newly May 26, 2000.
identified D005 or mineral
processing wastes.
D006.................................. Newly identified D006 and August 24, 1998.
mineral processing wastes.
D006.................................. Mixed radioactive/newly May 26, 2000.
identified D006 or mineral
processing wastes.
D007.................................. Newly identified D007 and August 24, 1998.
mineral processing wastes.
D007.................................. Mixed radioactive/newly May 26, 2000.
identified D007or mineral
processing wastes.
D008.................................. Newly identified D008 and August 24, 1998.
mineral processing waste.
D008.................................. Mixed radioactive/newly May 26, 2000.
identified D008 or mineral
processing wastes.
D009.................................. Newly identified D009 and August 24, 1998.
mineral processing waste.
D009.................................. Mixed radioactive/newly May 26, 2000.
identified D009or mineral
processing wastes.
D010.................................. Newly identified D010 and August 24, 1998.
mineral processing wastes.
D010.................................. Mixed radioactive/newly May 26, 2000.
identified D010 ormineral
processing wastes.
D011.................................. Newly identified D011 and August 24, 1998.
mineral processing wastes.
D011.................................. Mixed radioactive/newly May 26, 2000.
identified D011or mineral
processing wastes.
* * * * * * *
F032.................................. All others...................... August 12, 1997.
* * * * * * *
F034.................................. All others...................... August 12, 1997.
F035.................................. Mixed with radioactive wastes... May 12, 1999.
F035.................................. All others...................... August 12, 1997.
* * * * * * *
K088.................................. All others...................... October 8, 1997.
* * * * * * *
----------------------------------------------------------------------------------------------------------------
* * * * *
Table 2.--Summary of Effective Dates of Land Disposal Restrictions for
Contaminated Soil and Debris (CSD)
------------------------------------------------------------------------
Restricted hazardous waste in CSD Effective date
------------------------------------------------------------------------
* * * *
* * *
9. Soil and debris contaminated with K088 October 8, 1997.
wastes.
* * * *
* * *
12. Soil and debris contaminated with August 24, 1998.
newly identified D004-D011 toxicity
characteristic wastes and mineral
processing wastes.
13. Soil and debris contaminated with May 26, 2000.
mixed radioactive newly identified D004-
D011 characteristic wastes and mineral
processing wastes.
------------------------------------------------------------------------
20. Appendix VIII to Part 268 is amended by revising the title and
adding in alpha numeric order the entry ``NA'' to read as follows:
Appendix VIII to Part 268--LDR Effective Dates of Injected
Prohibited Hazardous Wastes
National Capacity LDR Variances for UIC Wastes
------------------------------------------------------------------------
Waste code Waste category Effective date
------------------------------------------------------------------------
* * * *
* * *
NA......................... Newly identified May 26, 2000.
mineral processing
wastes from titanium
dioxide production
and mixed
radioactive/newly
identified D004-D011
characteristic
wastes and mineral
processing wastes.
* * * *
* * *
------------------------------------------------------------------------
[[Page 28753]]
PART 271--REQUIREMENTS FOR AUTHORIZATION OF STATE HAZARDOUS WASTE
PROGRAMS
21. The authority citation for Part 271 continues to read as
follows:
Authority: 42 U.S.C. 6905, 6912(a) and 6926.
Subpart A--Requirements for Final Authorization
22. Section 271.1(j) is amended by adding the following entries to
Table 1 in chronological order by date of publication in the Federal
Register, and by adding the following entries to Table 2 in
chronological order by effective date in the Federal Register, to read
as follows:
Sec. 271.1 Purpose and scope.
* * * * *
(j) * * *
Table 1.--Regulations Implementing the Hazardous and Solid Waste Amendments of 1984
----------------------------------------------------------------------------------------------------------------
Federal Register
Promulgation date Title of regulation reference Effective date
----------------------------------------------------------------------------------------------------------------
* * * * * *
*
May 26, 1998................... Land Disposal [Insert FR page August 24, 1998.
Restrictions Phase IV numbers].
Final Rule.
* * * * * *
*
----------------------------------------------------------------------------------------------------------------
* * * * *
Table 2.--Self-Implementing Provisions of the Hazardous and Solid Waste Amendments of 1984
--------------------------------------------------------------------------------------------------------------------------------------------------------
Self-implementing
Effective date provision RCRA citation Federal Register reference
--------------------------------------------------------------------------------------------------------------------------------------------------------
* * * * * * *
August 24, 1998....................... Prohibition on land 3004(m).................. Date of publication and FR page cite.
disposal of newly
identified wastes
including TC metal
wastes and
characteristic mineral
processing wastes;
treatment standards for
contaminated soil.
May 26, 2000.......................... Prohibition on land 3004(m).................. Date of publication and FR page cite.
disposal of newly
identified wastes from
elemental phosphorus
processing and mixed
radioactive and newly
identified TC metal/
mineral processing
wastes (including soil
and debris).
Prohibition on
underground injection of
newly identified mineral
processing wastes from
titanium dioxide
production
* * * * * * *
--------------------------------------------------------------------------------------------------------------------------------------------------------
* * * * *
[FR Doc. 98-12575 Filed 5-22-98; 8:45 am]
BILLING CODE 6560-50-P
