04-9578. Pesticides; Tolerance Exemptions for Active and Inert Ingredients for Use in Antimicrobial Formulations (Food-Contact Surface Sanitizing Solutions)

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Final rule.

SUMMARY:

EPA is adding a new section to part 180 to list the pesticide chemicals that are exempt from the requirement of a tolerance when used in food-contact surface sanitizing solutions. This list of exempt pesticide chemicals is duplicated from the Food and Drug Administration's (FDA) regulations in 21 CFR 178.1010. For some of these chemical substances, EPA's list will use naming conventions differing from those used by FDA. Additionally, EPA is redesignating/reorganizing § 180.1001. This section of CFR will be split into five separate sections with no changes in text or content.

DATES:

This final rule is effective on April 28, 2004.

ADDRESSES:

EPA has established a docket for this action under Docket ID number OPP-2003-0368 All documents in the docket are listed in the EDOCKET index at http://www.epa.gov/edocket. Although listed in the index, some information is not publicly available, i.e., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the Internet and will be publicly available only in hard copy form. Publicly available docket materials are available either electronically in EDOCKET or in hard copy at the Public Information and Records Integrity Branch (PIRIB), Rm. 119, Crystal Mall #2, 1921 Jefferson Davis Hwy., Arlington, VA., Monday through Friday, excluding legal holidays. The Docket telephone number is (703) 305-5805.

FOR FURTHER INFORMATION CONTACT:

Kathryn Boyle, Registration Division (7505C), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (703) 305-6304; fax number: (703) 305-0599; e-mail address: boyle.kathryn@epa.gov.

SUPPLEMENTARY INFORMATION:

-------

I. General Information

A. Does This Action Apply to Me?

You may be potentially affected by this action if you formulate or market pesticide products. Potentially affected categories and entities may include, but are not limited to:

Food manufacturing (NAICS 311)
Antimicrobial pesticides (NAICS 32561)

This listing is not intended to be exhaustive, but rather provides a guide for readers regarding entities likely to be affected by this action. Other types of entities not listed in this unit could also be affected. The North American Industrial Classification System (NAICS) codes have been provided to assist you and others in determining whether this action might apply to certain entities. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Access Copies Of this Document and Other Related Information?

In addition to using EDOCKET (http://www.epa.gov/edocket/, you may access this Federal Register document electronically through the EPA Internet under the “Federal Register” listings at http://www.epa.gov/fedrgstr/. A frequently updated electronic version of 40 CFR part 180 is available at E-CFR Beta Site Two at http://www.gpoaccess.gov/ecfr/.

II. What is the Agency's Authority for Taking this Action?

This final rule is issued under the Federal Food, Drug and Cosmetic Act (FFDCA) section 408, 21 U.S.C. 346a, as amended by the Food Quality Protection Act (FQPA) (Public Law 104-170), and the Antimicrobial Regulation Technical Correction Act (ARTCA) (Public Law 105-324).

Section 408 of FFDCA authorizes the establishment of tolerances, exemptions from the requirement of a tolerance, modifications in tolerances, and revocation of tolerances for residues of pesticide chemicals in or on raw agricultural commodities and processed foods. Owing to the FQPA and ARTCA amendments to FFDCA, certain chemical substances originally regulated by FDA under FFDCA section 409 as food-contact surface sanitizing solutions are now subject to EPA's authority under FFDCA section 408. Section 408(j)(2) of FFDCA provides that all regulations issued by FDA under FFDCA section 409 that stated conditions for safe use of substances that are now, post-FQPA, considered pesticide chemical residues in or on processed food or that otherwise stated the conditions under which such pesticide chemicals could be safely used, shall be deemed to be regulations issued under FFDCA section 408.

These pesticide chemical regulations are now subject to modification or revocation at EPA's initiative under FFDCA section 408(e). Today's rule duplicates the substance of FDA's food additive regulations for those chemical substances found in 21 CFR 178.1010 which are now pesticide chemicals, by codifying tolerance exemptions in a format consistent with EPA's authority under section 408 in a new section, 40 CFR 180.940.

Because some solutions described in 21 CFR 178.1010 may still have uses as food additives, FDA is leaving 21 CFR 178.1010 in effect. EPA's rulemaking activity has no effect on any of the FDA-regulated FFDCA section 409 food additive regulations in 21 CFR 178.1010.

III. Impact on Tolerance Reassessment

This rule shifts existing tolerance exemptions from 21 CFR 178.1010 to 40 CFR 180.940. These are duplicated from existing, valid FFDCA section 408 regulations. FDA promulgated the food additive regulations in 21 CFR 178.1010 under the authority of FFDCA section 409 prior to the enactment of FQPA. Those portions of 21 CFR 178.1010 that pertain to chemical substances that are pesticide chemicals post-FQPA and remain as such post-ARTCA were converted by FFDCA section 408(j)(2) into FFDCA section 408 tolerance exemptions. Thus, EPA's duplication of these tolerance exemptions is not “establishing, modifying, or revoking a tolerance” under FFDCA section 408(b). EPA is not, therefore, required to conduct a full reassessment of these tolerance exemptions at this time. However, because the tolerance exemptions duplicated from 21 CFR 178.1010 into 40 CFR 180.940 were in effect prior to the enactment of FQPA, they are subject to the tolerance reassessment deadline of August 2, 2006.

IV. Background

In the Federal Register of December 3, 2002 (67 FR 71847) (FRL-6824-2), the Agency published a direct final rule to establish 40 CFR 180.940. Comments were received. In the December 3, 2002 FR final rule, EPA had announced that it would withdraw the direct final rule if it received adverse comment, and proceed with proposed rule as provided by section 553 of the Administrative Start Printed Page 23114Procedure Act, 5 U.S.C. 553. Because some of the comments were of a nature that would warrant a response if made on a proposed rule, they were adverse comments that required withdrawal of the direct final rule. EPA withdrew the direct final rule on March 24, 2003 (68 FR 14165)(FRL-7299-4).

In the Federal Register of June 25, 2003 (68 FR 37778) (FRL-7302-2), the Agency issued its proposal to establish 40 CFR 180.940. The comments received as a result of the December 3, 2002, direct final rule were addressed in that proposed rule.

Six comments were received in response to the June 25^th proposed rule. There was also a late comment to the direct final rule.

One commenter requested to increase the concentrations of certain chemical ingredients. At this time, EPA is not proposing to change the upper concentration limits as specified by FDA in 21 CFR 178.1010. The purpose of this final rule action is to duplicate FDA's previous clearances in a format consistent with EPA's authority under section 408. To increase the concentration limitations from those specified by FDA, requires the performance of a risk assessment. At this time EPA is merely duplicating the listing of chemicals in 21 CFR 178.1010 to 40 CFR 180.940, albeit in a different format. EPA is required under section 408(q)(1)(C) to complete tolerance reassessment for all pesticide chemicals by 2006, and will consider the commenter's suggestion during tolerance reassessment.

The same commenter requested that all GRAS ingredients listed under 21 CFR part 184 be included in 180.940. Another commenter requested that all chemical substances designated as GRAS in 21 CFR part 582 be included in 40 CFR 180.940 under a catch-all provision. The Agency understands that 21 CFR 178.1010 allows the inclusion of GRAS chemical substances and chemical substances “permitted by prior sanction or approval,” that are not expressly identified in 21 CFR 178.1010. It is for this reason that the Agency asked registrants of food-contact surface sanitizing solutions to specifically identify all other ingredients that they believe should be included in 40 CFR 180.940. At a later date, EPA intends to publish its proposal to revise 40 CFR 180.940 by adding chemical substances that were not specified by name in 21 CFR 178.1010 but that are included in a registered food-contact surface sanitizing solution. Today's final rule only considers the chemical substances that were specified by name in 21 CFR 178.1010.

One commenter expressed concern that documenting all of FDA's informal clearances could prove to be difficult. They stated that the existence of a registration should be sufficient proof. The Agency agrees. In fact, several registrants of various food-contact surface sanitizing solutions have already supplied the Agency with a list of chemical substances that were not included in the proposed 40 CFR 180.940, but are part of a registered pesticide product. The claims for inclusion of these chemical substances were documented only by reference to an EPA Registration Number. Where EPA's files clearly demonstrate both that the registered pesticide was subject to section 409 and contained the chemical substance before enactment of the FQPA, EPA will include the chemical substance in the upcoming proposal to revise 40 CFR 180.940. So although identifying a registered pesticide as containing a particular chemical substance may be sufficient to support inclusion in 40 CFR 180.940, registrants can maximize the likelihood of inclusion by providing documentation of FDA's prior sanction or approval.

Two commenters requested confirmation on whether or not chemical substances that are included in an existing, registered food-contact surface sanitizing solution, but are not included by name in 21 CFR 178.1010, are considered under this final rule to be FDA-approved substances. Today's final rule does not address such chemical substances. In the preambles to both the direct final rule and the proposed rule, EPA asked registrants of food-contact surface sanitizing solutions to identify to EPA any chemical substances that they claim have been cleared by FDA for use in sanitizing solutions but not expressly identified in 21 CFR 178.1010. As previously stated, at some time in the near future, EPA intends to publish its proposal to revise 40 CFR 180.940 to add chemical substances that were not specified by name in 21 CFR 178.1010. In order to preserve the use of registered food-contact surface sanitizing solutions whose ingredients were cleared by FDA before FQPA's enactment, EPA will treat all of the component chemicals (whether or not they are specifically identified in 21 CFR 178.1010) of registered food-contact surface sanitizing solutions as exempt from the requirement of a tolerance until EPA has completed its review of the registrants' claims with respect to pesticide chemicals not specifically identified in 21 CFR 178.1010.

The same two commenters also stated that EPA should not distinguish between the three categories of food-contact surface sanitizing solutions. They believe that these categories have not been rigidly applied. Today's final rule addresses only those use patterns as specifically described in 21 CFR 178.1010. If a registrant supplies information to the Agency to demonstrate that FDA cleared a solution for uses broader than described in § 178.1010, then EPA can include these changes in its upcoming proposal to revise 40 CFR 180.940. However, today's regulation merely duplicates the substance of the existing FDA regulation.

The late comment (to the direct final rule) requested that all of the quaternary sanitizer solutions currently listed under 21 CFR 178.1010 be approved by EPA for end use at a concentration not to exceed 400 ppm of the active quaternary compound. The rationale for such a change included a statement that FDA had intended to make such a change and a discussion of the concerns of public health officials who advocate for solutions with demonstrated efficacy over a wide range of concentrations. Such a range would provide the user “a reasonable margin of error” while preparing safe and effective sanitizing solutions.

In a similar manner, another commenter indicated its belief that the proposed language for the quaternary ammonium compounds was inconsistent with the existing FDA regulations. According to the commenter FDA had established a total limit of 400 ppm for the quaternary ammonium compounds, while EPA's approach could possibly allow up to 750 ppm. EPA discussed this issue with FDA, and concluded that the comments have merit, not only for the quaternary ammonium compounds, but also for other chemicals that were expressed as total or solution limits. This would include the halogens (chloride-, bromide-, and iodide-producing chemicals) and napthalene sulfonate derivatives. Since the concentration limits for the above chemicals are specified in 21 CFR 178.1010 as total or solution limits, this change has been carried forward to 40 CFR 180.940.

One of the commenters submitted a letter from FDA which seemed to indicate that FDA had raised the maximum at-use concentration of certain chemicals from 200 ppm to 220 ppm. This comment was also discussed with FDA who indicated that while they had “no objection” to 220 ppm as the at-use concentration, they intended that the tolerance for residues in or on food should remain at 200 ppm. FDA would continue to have no objection to use Start Printed Page 23115levels as high as 220 as indicated through field testing.

While not in response to a comment, the Agency is making several changes to the list of chemical substances proposed in the June 25^th proposed rule. Several of the chemical substances (citric acid, dextrin, magnesium oxide, sodium bicarbonate, starch and octadecanoic acid, calcium salt) have been recently classified as List 4A minimal risk inert ingredients (see the listings of inert ingredients at http://www.epa.gov/opprd001/inerts/lists.html). Tolerance exemptions for certain of these List 4A substances (citric acid, dextrins, and starch (as a food commodity)) have already been established in 40 CFR 180.950, the section of CFR that holds “Tolerance Exemptions for Minimal Risk Active and Inert Ingredients.” Because chemical substances with a tolerance exemption identified in 40 CFR 180.950 may be used in any pesticide product, including antimicrobial products, without limitation, having tolerance exemptions in both 40 CFR 180.940 and 180.950 would be redundant. Therefore, duplicative entries for citric acid, dextrin, and starch are not created today in 40 CFR 180.940. Additionally, because the Agency intends that all List 4A substances eventually will be transferred to 40 CFR 180.950 without limitations, the Agency is removing the concentration use limitations for sodium bicarbonate, magnesium oxide and octadecanoic acid, calcium salt.

Based on the reasons set forth in the preamble to the proposed rule, and considering the comments received by the Agency in response to the direct final and proposed rules, EPA is creating a new section 40 CFR 180.940.

Redesignation of 40 CFR 180.1001

In the July 1, 2002 edition of title 40 CFR parts 150 to 189, § 180.1001 occupies pages 508 to 537, a large amount of information for one section of CFR. Today's action shifts and splits 40 CFR 180.1001 with no changes to the text or content. See Table 1 for a redesignation of the paragraphs and the new sections.

**Table 1.—Redesignation of 40 CFR 180.1001**
Former CFR Designation	New CFR Designation
180.1001(a)	40 CFR 180.900
180.1001(b)	40 CFR 180.905
180.1001(c)	40 CFR 180.910
180.1001(d)	40 CFR 180.920
180.1001(e)	40 CFR 180.930

All references to 40 CFR 180.1001 in other sections of 40 CFR are also being changed to reflect the shift. Additionally two FDA regulations cite to 180.1001: 21 CFR 182.99 and 582.99. FDA is aware that this shift of 40 CFR 180.1001 is occurring.

V. Objections and Hearing Requests

Under section 408(g) of the FFDCA, as amended by the FQPA, any person may file an objection to any aspect of this regulation and may also request a hearing on those objections. The EPA procedural regulations which govern the submission of objections and requests for hearings appear in 40 CFR part 178. Although the procedures in those regulations require some modification to reflect the amendments made to the FFDCA by the FQPA of 1996, EPA will continue to use those procedures, with appropriate adjustments, until the necessary modifications can be made. The new section 408(g) provides essentially the same process for persons to “object” to a regulation for an exemption from the requirement of a tolerance issued by EPA under new section 408(d), as was provided in the old FFDCA sections 408 and 409. However, the period for filing objections is now 60 days, rather than 30 days.

A. What Do I Need to Do to File an Objection or Request a Hearing?

You must file your objection or request a hearing on this regulation in accordance with the instructions provided in this unit and in 40 CFR part 178. To ensure proper receipt by EPA, you must identify docket ID number OPP-2003-0368 in the subject line on the first page of your submission. All requests must be in writing, and must be mailed or delivered to the Hearing Clerk on or before June 28, 2004. -

1. Filing the request. Your objection must specify the specific provisions in the regulation that you object to, and the grounds for the objections (40 CFR 178.25). If a hearing is requested, the objections must include a statement of the factual issues(s) on which a hearing is requested, the requestor's contentions on such issues, and a summary of any evidence relied upon by the objector (40 CFR 178.27). Information submitted in connection with an objection or hearing request may be claimed confidential by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. A copy of the information that does not contain CBI must be submitted for inclusion in the public record. Information not marked confidential may be disclosed publicly by EPA without prior notice.

Mail your written request to: Office of the Hearing Clerk (1900C), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. You may also deliver your request to the Office of the Hearing Clerk in Rm.104, Crystal Mall #2, 1921 Jefferson Davis Hwy., Arlington, VA. The Office of the Hearing Clerk is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Office of the Hearing Clerk is (703) 603-0061.

2. Tolerance fee payment. If you file an objection or request a hearing, you must also pay the fee prescribed by 40 CFR 180.33(i) or request a waiver of that fee pursuant to 40 CFR 180.33(m). You must mail the fee to: EPA Headquarters Accounting Operations Branch, Office of Pesticide Programs, P.O. Box 360277M, Pittsburgh, PA 15251. Please identify the fee submission by labeling it “Tolerance Petition Fees.” -

EPA is authorized to waive any fee requirement “when in the judgement of the Administrator such a waiver or refund is equitable and not contrary to the purpose of this subsection.” For additional information regarding the waiver of these fees, you may contact James Tompkins by phone at (703) 305-5697, by e-mail at tompkins.jim@epa.gov, or by mailing a request for information to Mr. Tompkins at Registration Division (7505C), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

If you would like to request a waiver of the tolerance objection fees, you must mail your request for such a waiver to: James Hollins, Information Resources and Services Division (7502C), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

3. Copies for the Docket. In addition to filing an objection or hearing request with the Hearing Clerk as described in Unit V.A., you should also send a copy of your request to the PIRIB for its inclusion in the official record that is described in ADDRESSES. Mail your copies, identified by docket ID number OPP-2003-0368, to: Public Information Start Printed Page 23116and Records Integrity Branch, Information Resources and Services Division (7502C), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460. In person or by courier, bring a copy to the location of the PIRIB described in ADDRESSES. You may also send an electronic copy of your request via e-mail to: opp-docket@epa.gov. Please use an ASCII file format and avoid the use of special characters and any form of encryption. Copies of electronic objections and hearing requests will also be accepted on disks in WordPerfect 6.1/8.0 or ASCII file format. Do not include any CBI in your electronic copy. You may also submit an electronic copy of your request at many Federal Depository Libraries.

B. When Will the Agency Grant a Request for a Hearing?

A request for a hearing will be granted if the Administrator determines that the material submitted shows the following: There is a genuine and substantial issue of fact; there is a reasonable possibility that available evidence identified by the requestor would, if established resolve one or more of such issues in favor of the requestor, taking into account uncontested claims or facts to the contrary; and resolution of the factual issues(s) in the manner sought by the requestor would be adequate to justify the action requested (40 CFR 178.32).

VI. Statutory and Executive Order Reviews

This final rule reorganizes the existing exemptions in 40 CFR 180.1001, shifting them from one section to another within the same part. The Agency is acting on its own initiative under FFDCA section 408(e) in shifting these existing tolerance exemptions to a new section of part 180. This has no substantive effect, and is not expected to have any adverse impact, or otherwise impose any new requirements.

This final rule also establishes a new section, 40 CFR 180.940, “Tolerance Exemptions for Active and Inert Ingredients for Use in Antimicrobial Formulations (Food-Contact Surface Sanitizing Solutions).” As discussed in Unit II., this new section merely duplicates that portion of the existing FDA regulation 21 CFR 178.1010 that applies to chemical substances that are now subject to EPA's authority under FFDCA section 408. -

The Office of Management and Budget (OMB) has exempted these types of actions from review under Executive Order 12866, entitled Regulatory Planning and Review (58 FR 51735, October 4, 1993). Because this rule has been exempted from review under Executive Order 12866 due to its lack of significance, this rule is not subject to Executive Order 13211, Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use (66 FR 28355, May 22, 2001). This final rule does not contain any information collections subject to OMB approval under the Paperwork Reduction Act (PRA), 44 U.S.C. 3501 et seq., or impose any enforceable duty or contain any unfunded mandate as described under Title II of the Unfunded Mandates Reform Act of 1995 (UMRA) (Public Law 104-4). Nor does it require any special considerations under Executive Order 12898, entitled Federal Actions to Address Environmental Justice in Minority Populations and Low-Income Populations (59 FR 7629, February 16, 1994); or OMB review or any Agency action under Executive Order 13045, entitled Protection of Children from Environmental Health Risks and Safety Risks (62 FR 19885, April 23, 1997). This action does not involve any technical standards that would require Agency consideration of voluntary consensus standards pursuant to section 12(d) of the National Technology Transfer and Advancement Act of 1995 (NTTAA), Public Law 104-113, section 12(d) (15 U.S.C. 272 note). -

Under section 605(b) of the Regulatory Flexibility Act (RFA) (5 U.S.C. 601 et seq.), the Agency hereby certifies that the proposed action to reorganize 40 CFR 180.1001 will not have significant negative economic impact on a substantial number of small entities. Creation of a new section and the reorganization of 40 CFR 180.1001 does not have a substantive effect and hence causes no impact. In addition, the Agency has determined that this action will not have a substantial direct effect on States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government, as specified in Executive Order 13132, entitled Federalism (64 FR 43255, August 10, 1999). Executive Order 13132 requires EPA to develop an accountable process to ensure “meaningful and timely input by State and local officials in the development of regulatory policies that have federalism implications.” “Policies that have federalism implications” is defined in the Executive order to include regulations that have “substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.” This final rule directly regulates growers, food processors, food handlers and food retailers, not States. This action does not alter the relationships or distribution of power and responsibilities established by Congress in the preemption provisions of FFDCA section 408(n)(4). For these same reasons, the Agency has determined that this rule does not have any “tribal implications” as described in Executive Order 13175, entitled Consultation and Coordination with Indian Tribal Governments (65 FR 67249, November 6, 2000). Executive Order 13175, requires EPA to develop an accountable process to ensure “meaningful and timely input by tribal officials in the development of regulatory policies that have tribal implications.” “Policies that have tribal implications” is defined in the Executive order to include regulations that have “substantial direct effects on one or more Indian tribes, on the relationship between the Federal Government and the Indian tribes, or on the distribution of power and responsibilities between the Federal Government and Indian tribes.” This rule will not have substantial direct effects on tribal governments, on the relationship between the Federal Government and Indian tribes, or on the distribution of power and responsibilities between the Federal Government and Indian tribes, as specified in Executive Order 13175. Thus, Executive Order 13175 does not apply to this rule.

VII. Congressional Review Act

The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the Small Business Regulatory Enforcement Fairness Act of 1996, generally provides that before a rule may take effect, the Agency promulgating the rule must submit a rule report, which includes a copy of the rule, to each House of the Congress and the Comptroller General of the United States. EPA will submit a report containing this rule and other required information to the U.S. Senate, the U.S. House of Representatives, and the Comptroller General of the United States prior to publication of the rule in the Federal Register. This rule is not a “major rule” as defined by 5 U.S.C. 804(2).

List of Subjects in 40 CFR Parts 153, 168, and 180

Environmental protection
Administrative practice and procedure
Advertising
Agricultual commodities,

Dated: April 21, 2004.

James Jones,

Director, Office of Pesticide Programs.

Therefore, 40 CFR chapter I is amended as follows:

------

PART 153—[AMENDED]

1. The authority citation for part 153 continues to read as follows:

Authority: 15 U.S.C. 136 et seq.

2. Sections 153.155 is amended by revising paragraph (c)(1) to read as follows:

§ 153.155

Seed treatment products.

(1) Sections 180.910, 180.920, and 180.950 if an exemption from the requirement of a tolerance has been established.

PART 168—[AMENDED]

3. The authority citation for part 168 continues to read as follows:

Authority: 15 U.S.C. 136 et seq.

4. Section 168.65 is amended by revising the first sentence of paragraph (b)(1)(iii)(A)( 2)(i), and by revising paragraph (b)(1)(iii)(A)(2)(ii) to read as follows:

§ 168.65

Pesticide export label and labeling requirements.

----

(b) * * *

(1) * * *

(iii) * * *

(A) * * *

(2) * * *

(i) The change in color must result only from the addition of a dye included on the list of the chemicals exempted from the requirement of a tolerance at 40 CFR 180.910, 180.920, 180.930, and 180.950, and the dye must not be a List 1 inert. * * *

(ii) The change in fragrance must result only from the addition of a chemical included on the list of the chemicals exempted from the requirement of a tolerance at 40 CFR 180.910, 180.920, 180.930, and 180.950, and the chemical must not be a List 1 inert.

5. Section 168.75 is amended by revising the second and fifth sentences of paragraph (b)(4)(iii) to read as follows:

§ 168.75

Procedures for exporting unregistered pesticide-purchase acknowledgment statements. ---- -

(b) * * *

(4) * * *

(iii) * * * The change in color must result only from the addition of a dye included on the list of the chemicals exempted from the requirement of a tolerance at 40 CFR 180.910, 180.920, 180.930, and 180.950, and the dye must not be a List 1 inert. * * * The change in fragrance must result only from the addition of a chemical included on the list of the chemicals exempted from the requirement of a tolerance at 40 CFR 180.910, 180.920, 180.930, and 180.950, and the chemical must not be a List 1 inert. * * *

---

PART 180—[AMENDED]

6. The authority citation for part 180 continues to read as follows:

Authority: 21 U.S.C. 321(q), 346a and 371.

7. Section 180.900 is added to subpart D to read as follows:

§ 180.900

Exemptions from the requirement of a tolerance.

An exemption from a tolerance shall be granted when it appears that the total quantity of the pesticide chemical in or on all raw agricultural commodities for which it is useful under conditions of use currently prevailing or proposed will involve no hazard to the public health.

8. Section 180.905 is added to subpart D to read as follows:

§ 180.905

Pesticide chemicals; exemptions from the requirement of a tolerance.

(a) When applied to growing crops, in accordance with good agricultural practice, the following pesticide chemicals are exempt from the requirement of a tolerance:

(1) [Reserved]

(2) N-Octylbicyclo(2,2,1)-5-heptene-2,3-dicarboximide.

(3) Petroleum oils.

(4) Piperonyl butoxide.

(5) [Reserved]

(6) Pyrethrum and pyrethrins.

(7) Rotenone or derris or cube roots.

(8) Sabadilla.

(b) These pesticides are not exempted from the requirement of a tolerance when applied to a crop at the time of or after harvest.

9. Section 180.910 is added to subpart D to read as follows:

§ 180.910

Inert ingredients used pre- and post-harvest; exemptions from the requirement of a tolerance.

Residues of the following materials are exempted from the requirement of a tolerance when used in accordance with good agricultural practice as inert (or occasionally active) ingredients in pesticide formulations applied to growing crops or to raw agricultural commodities after harvest:

Inert ingredients	Limits	Uses
Acetic acid		Catalyst
Acetic anhydride		Solvent, cosolvent
Acetone		Do.
Alkanoic and alkenoic acids, mono- and diesters of α-hydro-ω-hydroxypoly (oxyethylene) with molecular weight (in amu) range of 200 to 6,000		Emulsifiers
Alkyl (C₈-C₂₄) benzenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts		Surfactants, related adjuvants of surfactants
α-Alkyl (C₉-C₁₈-ω-hydroxypoly(oxyethylene) with poly(oxyethylene) content of 2-30 moles		Solvent, cosolvent, surfactant, and related adjuvants of surfactants
α-(p-Alkylphenyl)-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of alkylphenol (alkyl is a mixture of propylene tetramer and pentamer isomers and averages C₁₃) with 6 moles of ethylene oxide		Surfactants, related adjuvants of surfactants
Start Printed Page 23118
α-Alkyl (C₆-C₁₄)-ω-hydroxypoly(oxypropylene) block copolymer with polyoxyethylene; polyoxypropylene content is 1-3 moles; polyoxyethylene content is 4-12 moles; average molecular weight (in amu) is approximately 635		Do.
α-alkyl (C₁₂-C₁₅)-ω-hydroxypoly (oxypropylene) poly (oxyethylene) copolymers (where the poly (oxypropylene) content is 3-60 moles and the poly (oxyethylene) content is 5-80 moles)	Not more than 20% of pesticide formulations	Surfactant
Alkyl (C₈-C₁₈) sulfate and its ammonium, calcium, isopropylamine, magnesium, potassium, sodium, and zinc salts		Surfactants.
Aluminum hydroxide		Diluent, carrier
Aluminum oxide		Diluent
Aluminum stearate		Surfactant
Ammonium bicarbonate		Surfactant, suspending agent, dispersing agent
Ammonium carbamate		Synergist in aluminum phosphide formulations
Ammonium chloride		Intensifier when used with ammonium nitrate as a dessicant or defoliant. Fire suppressant in aluminum phosphide and magnesium phosphide formulations
Ammonium hydroxide		Solvent, cosolvent, neutralizer, solubilizing agent
Ammonium stearate		Surfactant
Ammonium sulfate		Solid diluent, carrier
Ammonium thiosulfate		Intensifier when used with ammonium nitrate as desiccant or defoliant
Amyl acetate		Solvent, cosolvent, attractant
Ascorbic acid (CAS Reg. No. 50-81-7)		Stabilizer, preservative
Ascorbyl palmitate		Preservative
Attapulgite-type clay		Solid diluent, carrier, thickener
Bacillus thuringiensis fermentation solids and/or solubles		Diluent, carrier
Beeswax		Coating agent
Bentonite		Solid diluent, carrier
Benzoic acid		Preservative for formulation
Butane		Propellant
n-Butanol (CAS Reg. No. 71-36-3)		Solvent, cosolvent
Butylated hydroxyanisole		Antioxidant
Butylated hydroxytoluene		Do.
α-(p-tert-Butylphenyl)-ω-hydroxypoly (oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the poly(oxyethylene) content averages 4-12 moles		Surfactants related adjuvants of surfactants
Calcareous shale		Solid diluent carrier
Calcite		Do.
Calcium carbonate		Do.
Calcium chloride		Stabilizer
Calcium phosphate		Solid diluent, carrier
Calcium hydroxide		Do.
Calcium hypochlorite		Sanitizing and bleaching agent
Calcium oxide		Solid diluent, carrier
Calcium salt of partially dimerized rosin, conforming to 21 CFR 172.210		Coating agent
Calcium silicate		Solid diluent, carrier
Calcium stearate		Do.
Carnauba wax		Coating agent
Carrageenan, conforming to 21 CFR 172.620	Minimum molecular weight (in amu): 100,000	Thickener
Casein	Expires May 24, 2005.	Surfactant, emulsifier, wetting agent
Cetyl alcohol (CAS Reg. No. 36653-82-4)	Not more than 5.0% of pesticide formulation	Evaporation retardant
Charcoal, activated	Meets specifications in the Food Chemical Codex	Carrier
Coconut shells		Solid diluent and carrier
Cod liver oil		Solvent, cosolvent
Coumarone—indene resin, conforming to 21 CFR 172.215	For use on citrus only	Component of coating agent
Croscarmellose sodium (CAS Reg. No. 74811-65-7)		Disintegrant, solid diluent, carrier, and thickener
Diacetyl tartaric acid esters of mono- and diglycerides of edible fatty acids		Emulsifier
Start Printed Page 23119
Dialkyl (C₈-C₁₈) dimethyl ammonium chloride	Not more than 0.2% in silica, hydrated silica	Flocculating agent in the manufacture of silica, hydrated silica for use as a solid diluent, carrier
Diatomite (diatomaceous earth)		Solid diluent carrier
Dichlorodifluoromethane		Propellant
Dichlorotetrafluoroethane		Do.
Diethylene glycol abietate		Surfactants, related adjuvants of surfactants
1,1-Difluoroethane (CAS Reg. No. 75-37-6)	For aerosol pesticide formulations used for insect control in food- and feed-handling establishments and animals	Aerosol propellant
1,2-Dihydro-6-ethoxy-2,2,4-trimethylquinolene	Not more than 0.02% of pesticide formulation	Antioxidant
3,6-Dimethyl-4-octyn-3,6-diol	Not more than 2.5% of pesticide formulation	Surfactants, related adjuvants of surfactants
α-(o,p-Dinonylphenyl)-ω-hydroxypoly (oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 moles		Surfactants, related adjuvants of surfactants
α-(o,p-Dinonylphenyl)-ω-hydroxypoly (oxyethylene) produced by condensation of 1 mole of dinonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 or 140-160 moles of ethylene oxide		Do.
Dipropylene glycol		Solvent, cosolvent
Disodium phosphate		Anticaking agent, conditioning agent
Disodium zinc ethylenediaminetetraacetate dihydride		Sequestrant
Dodecylbenzenesulfonic acid, amine salts		Release rate regulator in pheromone formulation
α-(p-Dodecylphenyl)-ω-hydroxypoly (oxyethylene) produced by the condensation of 1 mole of dodecylphenol (dodecyl group is a propylene tetramer isomer) with an average of 4-14 or 30-70 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4-14 or 30-70		Surfactants, related, adjuvants of surfactants
Dolomite		Solid diluent, carrier
Epoxidized linseed oil		Surfactants, related adjuvants of surfactants
Epoxidized soybean oil		Do.
Ethoxylated lignosulfonic acid, sodium salt		Surfactant
Ethyl acetate		Solvent, cosolvent
Ethyl alcohol		Do.
Ethyl esters of fatty acids derived from edible fats and oils		Solvent, cosolvent
Ethylene methylphenyglycidate		Synthetic flavoring
Ethylene oxide adducts of 2,4,7,9-tetramethyl-5-decynediol, the ethylene oxide content averages 3.5, 10, or 30 moles		Surfactants, related adjuvants of surfactants
Ethylenediaminetetraacetic acid	3% of pesticide formulation	Sequestrant
Ethylenediaminetetraacetic acid, tetrasodium salt	5% of pesticide formulation	Sequestrant
2-Ethyl-1-hexanol	Not more than 2.5% of pesticide formulation	Solvent, adjuvant of surfactants
Fatty acids, conforming to 21 CFR 172.860		Binder, defoaming agent, lubricant
FD&C Blue No. 1	Not more than 0.2% of pesticide formulation	Dye
FD&C Red No. 40 (CAS Reg. No. 25956-17-6) conforming to 21 CFR 74.340	Not to exceed 0.002% by weight of pesticide formulation	Dye, coloring agent
Ferric sulfate		Solid diluent, carrier
Fish meal	Expires May 24, 2005.	Solid diluent, carrier
Furcelleran		Thickener
Glycerides, edible fats and oils derived from plants and animals, reaction products with sucrose (CAS Reg. Nos. 100403-38-1, 100403-41-6, 100403-39-2, 100403-40-5)		Emulsifier, dispersing agent
Glycerol		Thickener
Glycerol mono-, di-, and triacetate		Solvent, cosolvent
Glyceryl monostearate		Emulsifier
Granite		Do.
Graphite		Solid diluent, carrier
Start Printed Page 23120
Gum arabic (acacia)		Surfactant, suspending agent, dispersing agent
Gypsum		Solid diluent, carrier
Hexamethylenetetramine	For use in citrus washing solutions only at not more than 1%	Preservative
n-Hexyl alcohol (CAS Reg. No. 111-27-3)		Solvent, cosolvent
Humic acid, sodium salt (CAS Reg. No. 68131-04-4)		Adjuvant, UV protectant.
Hydrochloric acid		Solvent, neutralizer
Hydroxyethylidine diphosphonic acid (HEDP) (CAS Reg. No. 2809-21-4)	For use in antimicrobial pesticide formulations at not more than 1 percent	Stabilizer, chelator
Iron oxide		Solid diluent, carrier
Isopropyl alcohol		Solvent, cosolvent, stabilizer, inhibitor
Isopropyl myristate, CAS Reg. No. 110-27-0		Solvent
Kaolinite-type clay		Solid diluent, carrier
Lactic acid		Solvent
Lauryl alcohol		Surfactant
α-Lauryl-ω-hydroxypoly(oxyethylene), average molecular weight (in amu) of 600		Emulsifier
α-Lauryl-ω-hydroxypoly(oxyethylene) sulfate, sodium salt; the poly(oxyethylene) content is 3-4 moles		Surfactants, related adjuvants of surfactants
Lignosulfonate, ammonium, calcium, magnesium, potassium, sodium, and zinc salts		Surfactants, related adjuvants of surfactants
d-Limonene (CAS Reg. No. 5989-27-5)		Solvent, fragrance
Magnesium carbonate		Anticaking agent, conditioning agent
Magnesium chloride		Safener
Magnesium lime		Solid diluent, carrier
Magnesium oxide		Do.
Magnesium silicate		Do.
Magnesium stearate		Surfactant
Magnesium sulfate		Solid diluent, carrier, safener
Manganous oxide		Solid diluent, carrier
Methyl alcohol		Solvent
Methyl n-amyl ketone (CAS Reg. No. 110-43-0)		Solvent, cosolvent
Methylated silicones		Antifoaming agent
Methyl esters of fatty acids derived from edible fats and oils		Solvent, cosolvent
Methyl esters of higher fatty acids conforming to 21 CFR 573.640		Antidusting agent, surfactant
Methyl ester of rosin, partially hydrogenated (as defined in 21 CFR 172.615)		Surfactants, related adjuvants of surfactants
Methyl isobutyl ketone		Solvent
Mica		Solid diluent, carrier
Mineral oil, U.S.P., or conforming to 21 CFR 172.878 or 178.3620(a) (CAS Reg. No. 8012-95-1)		Diluent, carrier, and solvent
Modified polyester resin derived from ethylene glycol, fumaric acid, and rosin	For use on citrus only	Resinous coating
Monoammonium phosphate	No more than 3.75% by weight in formulation	Postharvest fumigation in formulation with aluminum phosphide
Mono- and diglycerides of C₈-C₁₈ fatty acids		Surfactants, related adjuvants of surfactants
Montmorillonite-type clay		Solid diluent, carrier
Montmorillonite-type clay treated with polytetrafluoroethylene (PTFE; CAS Reg. No. 9002-84-0)	PTFE content not greater than 0.5% (w/w) of clay	Carrier
Nonyl, decyl, and undecyl glycoside mixture with a mixture of nonyl, decyl, and undecyl oligosaccharides and related reaction products (primarily decanol and undecanol) produced as an aqueous-based liquid (50 to 65% solids) from the reaction of primary alcohols (containing 15 to 20% secondary alcohol isomers) in a ratio of 20% C_9, 40% C_10, and 40% C₁₁ with carbohydrates (average glucose to alkyl chain ratio 1.3 to 1.8)		Surfactant.
α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 moles or 30 moles		Surfactants, related adjuvants of surfactants
Start Printed Page 23121
α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 or 30-90 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4-14 or 30-90		Do.
α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) sulfate, ammonium, calcium, magnesium, potassium, sodium, and zinc salts; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4 moles		Do.
Octyl and decyl glucosides mixture with a mixture of octyl and decyloligosaccharides and related reaction products (primarily n- decanol) produced as an aqueous-based liquid (68-72% solids) from the reaction of straight chain alcohols (C₈ (45%), C₁₀ (55%)) with anhydrous glucose		Do.
Oleic acid		Diluent
Oleic acid diester of α-hydro-ω-hydroxypoly (oxyethylene); the poly(oxyethylene) having average molecular weight (in amu) 400		Surfactants, related adjuvants of surfactants
α-Oleoyl-ω-hydroxypoly(oxyethylene), average molecular weight (in amu) of 600		Emulsifier
Oleyl alcohol (CAS Reg. No. 143-28-2	15%	Cosolvent
Oxalic acid	No more oxalic acid should be used than is necessary to chelate calcium and in no case should more than 2 lb oxalic acid per acre be used	Calcium chelating hard water inhibitor
Oxidized pine lignin, sodium salt, (CAS Reg. No. 68201-23-0)	Maximum of 2% of formulation	Surfactant, related adjuvant of surfactant
Palmitic acid		Diluent
Pentaerythritol ester of maleic anhydride modified wood rosin		Plasticizer
Pentaerythritol ester of modified resin		Do.
Pentaerythritol stearates mixture (CAS Reg. No. 85116-93-4) which include pentaerythritol monostearate (CAS Reg. No. 78-23-9), pentaerythritol distearate (CAS Reg. No. 13081-97-5), pentaerythritol tristearate (CAS Reg. No. 28188-24-1) and pentaerythritol tetrastearate (CAS Reg. No. 115-83-3)	No more than 25 ppm in pesticide formulations	Emulsifier
Petrolatum, conforming to 21 CFR 172.880		Coating agent
Petroleum hydrocarbons, light odorless conforming to 21 CFR 172.884		Solvent, diluent.
Petroleum hydrocarbons, synthetic isoparaffinic, conforming to 21 CFR 172.882		Do.
Petroleum naphtha, conforming to 21 CFR 172.250(d)		Component of coating agent
Petroleum wax, conforming to 21 CFR 172.886(d)		Coating agent
Phosphoric acid		Buffer
Phosphorus oxychloride		Catalyst
Pine lignin		Adsorbent
B-Pinene polymers		Surfactants, related adjuvants of surfactants
Polyethylene, conforming to 21 CFR 177.1520(c)		Binder, carrier, and coating agent
Polyethylene glycol[α-hydro-ω-hydroxypoly(oxyethylene)]; mean molecular weight (in amu) 194 to 9,500 conforms to 21 CFR 178.3750		Surfactants, related adjuvants of surfactants
Polyglycerol esters of fatty acids conforming to 21 CFR 172.854		Surfactants, related adjuvants of surfactants
Polyglyceryl phthalate ester of coconut oil fatty acids		Do.
Poly(methylene-p-tert-butylphenoxy)-poly(oxyethylene) ethanol; the poly(oxyethylene) content averages 4-12 moles		Coating agent
Poly(methylene-p-nonylphenoxy)poly (oxyethylene) ethanol; the poly(oxyethylene) content averages 4-12 moles		Coating agent
Start Printed Page 23122
Poly(oxy-1,2-ethanediyl), α-(carboxymethyl)-ω-(nonylphenoxy) produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 or 30-90 moles of ethylene oxide. The molecular weight (in amu) ranges are 454-894 and 1598-4238		Surfactant
Polyoxyethylene (20) sorbitan monostearate		Surfactants, related adjuvants of surfactants
[Poly[oxy(methyl-1,2-ethanediyl)], α-[2-bis(2-hydroxyethyl)amino]propyl]-ω-hydroxy,-ether with α-hydro-ω-hydroxypoly(oxy-1,2-ethanediyl) (1:2), mono-C_12-16 alkyl ethers, (CAS Reg. No. 176022-82-5)	Not to exceed 15% in the formulated product; only for use with glyphosate	Surfactant
Polysorbate 65, conforming to 21 CFR 172.838		Emulsifier
Potassium aluminum silicate		Solid diluent, carrier
Potassium hydroxide		Neutralizer
Potassium phosphate		Buffer
Potassium sulfate		Solid diluent
Propane		Propellant
n-Propanol		Solvent, cosolvent
2-Propenoic acid, 2-methyl-, polymer with ethyl 2-propenoate and methyl 2-methyl-2-propenoate, ammonium salt (CAS Registration No. 55989-05-4), minimum number average molecular weight (in amu), 18,900.		Encapsulating agent, dispensers, resins, fibers and beads
Propionic acid		Catalyst
Propylene glycol		Solvent, cosolvent.
Propylene glycol alginate (as defined in 21 CFR 172.858)		Defoaming agent
Propyl gallate		Antioxidant
Propyl p-hydroxybenzoate		Preservative for formulations
Pyrophyllite		Solid diluent, carrier
Rhizobium inoculants (e.g. Sinorhizobium, Bradyrhizobium & Rhizobium)		All leguminous food commodities
Rosin, partially dimerized (as defined in 21 CFR 172.615)		Surfactants, related adjuvants of surfactants
Rosin, partially hydrogenated (as defined in 21 CFR 172.615)		Do.
Rosin, wood		Do.
Salts of fatty acids, conforming to 21 CFR 172.863		Binder, emulsifier, anticaking agent
Sand		Solid diluent, carrier
Secondary alkyl (C₁₁-C₁₅) poly(oxyethylene) acetate, sodium salt; the ethylene oxide content averages 5 moles		Surfactant
Shellac, bleached; refined, food grade, arsenic and rosin-free		Coating agent
Soap (sodium or potassium salts of fatty acids)		Surfactant, emulsifier, wetting agent
Soapstone		Solid diluent
Sodium acid pyrophosphate		Surfactant, suspending agent, dispersing agent, buffer
Sodium α-olefinsulfonate (sodium C₁₄-C₁₆) (Olefin sulfonate)		Surfactants, related adjuvants of surfactants
Sodium aluminum silicate		Solid diluent, carrier
Sodium benzoate		Anticaking agent
Sodium bicarbonate		Neutralizer
Sodium diisobutylnaphthalenesulfonate		Surfactants, related adjuvants of surfactants
Sodium dioctylsulfosuccinate		Do.
Sodium dodecylphenoxybenzenedisulfonate		Do.
Sodium hexametaphosphate		Surfactant, emulsifier, wetting agent, suspending agent, dispersing agent, buffer
Sodium hydroxide		Neutralizer
Sodium isopropylisohexylnaphthalenesulfonate		Surfactants, related adjuvants of surfactants
Sodium N-lauroyl-N-methyltaurine		Do.
Sodium lauryl glyceryl ether sulfonate		Do.
Sodium metasilicate		Surfactants, emulsifiers, wetting agents, dispersing agents, buffer
Sodium monoalkyl and dialkyl (C₈-C₁₆) phenoxybenzenedisulfonate mixtures containing not less than 70% of the monoalkylated product		Surfactants, related adjuvants of surfactants
Sodium mono- and dimethyl naphthalenesulfonates, molecular weight (in amu) 245-260		Do.
Sodium mono-, di-, and tributyl naphthalenesulfonates		Do.
Sodium mono-, di-, and triisopropyl naphthalenesulfonate		Do.
Sodium N-oleoyl-N-methyltaurine		Do.
Sodium oleyl sulfate		Do.
Start Printed Page 23123
Sodium N-palmitoyl-N-methyltaurine		Do.
Sodium propionate		Preservative for formulation
Sodium salt of sulfated oleic acid		Surfactants, related adjuvants of surfactants
Sodium silicate		Surfactant, emulsifier, wetting agent, stabilizer, inhibitor
Sodium starch glycolate (CAS Reg. No. 9063-38-1)	Granular and tableted products only; not to exceed 8% of the formulated product	Disintegrant
Sodium sulfate		Solid diluent, carrier
Sodium sulfite		Stabilizer
Sodium thiosulfate anhydrous (CAS Reg. No.7772-98-7 or sodium thiosulfate pentahydrate,CAS Reg. No. 10102-17-7)	Not to exceed 6% of the formulated product	Dechlorinator, reducing agent
Sodium tripolyphosphate		Buffer, surfactant, suspending agent, dispersing agent, anticaking agent, conditioning agent
Sorbitan fatty acid esters (fatty acids limited to C_12, C_14, C_16, and C₁₈ containing minor amounts of associated fatty acids) and their derivatives; the poly(oxyethylene) content averages 5-20 moles		Surfactants, related adjuvants or surfactants.
Sorbic acid (and potassium salt)		Preservative for formulations
Sorbitol		Antidusting agent
Soy protein, isolated	Expires May 24, 2005	Adhesive
Soybean flour	Expires May 24, 2005.	Surfactant
Soybean oil-derived fatty acids		Solvent, cosolvent
Sperm oil conforming to 21 CFR 172.210		Coating agent
Stearic acid		Diluent
α-Stearoyl-ω-hydroxypoly(oxyethylene), average molecular weight (in amu) of 600		Emulsifier
α-Stearoyl-ω-hydroxypoly(oxyethylene); the poly(oxyethylene) content averages either 8, 9, or 40 moles; if a blend of products is used, the average number of moles ethylene oxide reacted to produce any product that is a component of the blend shall be either 8, 9, or 40		Surfactants, related adjuvants of surfactants
Sucrose octaacetate		Adhesive
Sulfuric acid (CAS Reg. No. 7664-93-9) that meets the Food Chemicals Codex specifications	0.1% of pesticide formulation	pH control agent
Sulfurous acid		Preservative
Synthetic paraffin and its succinic derivatives conforming to 21 CFR 172.275		Carrier, binder, and carrying agent
Synthetic petroleum wax, conforming to 21 CFR 172.888		Binder, carrier, and coating agent
Talc		Solid diluent, carriers
Tall oil; fatty acids not less than 58%, rosin acids not more than 44%, unsaponifiables not more than 8%		Surfactants, related adjuvants of surfactants
Tartrazine		Dye
1,1,1,2-Tetrafluoroethane, (CAS Reg. No. 811-97-2)		Aerosol propellant
Tetrahydrofurfuryl alcohol		Solvent cosolvent
α-[p-(1,1,3,3-Tetramethylbutyl)phenyl]-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-(1,1,3,3-tetramethylbutyl)phenol with a range of 1-14 or 30-70 moles of ethylene oxide: if a blend of products is used, the average range number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 1-14 or 30-70		Surfactants, related adjuvants of surfactants
α-[p-(1,1,3,3-Tetramethylbutyl) phenyl]-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-(1,1,3,3-tetramethylbutyl) phenol with an average of 4-14 or 30-70 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4-14 or 30-70		Do.
2,4,7,9-Tetramethyl-5-decyn-4, 7-diol	Not more than 2.5% of pesticide formulation	Surfactants, related adjuvants of surfactants
Tetrasodium pyrophosphate		Anticaking agent, conditioning agent
Tricalcium phosphate		Surfactant, suspending agent, dispersing agent, anticaking agent, conditioning agent
1,1,1-Trichloroethane		Solvent, cosolvent
Trichlorofluoromethane		Propellant
Tridecylpoly(oxyethylene) acetate, sodium salt; where the ethylene oxide content averages 6-7 moles		Surfactants, related adjuvants of surfactants
Start Printed Page 23124
Trisodium phosphate		Surfactant, emulsifier, wetting agent
Vermiculite		Solid diluent, carrier.
Walnut shells		Leaching inhibitor, binder for water-dispersible aggregates, sticker and suspension stabilizer
Wheat, including flour, bran, and starch	Expires May 24, 2005.	Solid diluent carrier, attractant
Wheat bran		Do.
Wintergreen oil		Attractant
Wood flour	Derived from wood free of chemical preservatives	Solid diluent and carrier
Xanthan gum-modified, produced by the reaction of xanthan gum and glyoxal (maximum 0.3% by weight)	Not more than 0.5% of pesticide formulation	Surfactant
Xylene meeting the specifications listed in 21 CFR 172.884(b)(4)	In pesticide formulations for grain storage only	Solvent, cosolvent
Zeolite (hydrated alkali aluminum silicate)		Solid diluent, carrier
Zinc oxide		Coating agent
Zinc sulfate (basic and monohydrate)		Do.
Zinc sulfate (basic and monohydrate)		Solid diluent, carrier

10. Section 180.920 is added to subpart D to read as follows:

§ 180.920

Inert ingredients used pre-harvest; exemptions from the requirement of a tolerance.

The following materials are exempted from the requirement of a tolerance when used in accordance with good agricultural practice as inert (or occasionally active) ingredients in pesticide formulations applied to growing crops only:

Inert ingredients	Limits	Uses
Acetonitrile	Not more than 0.5% of pesticide formulation	Solvent for blended emulsifiers in all pesticides used before crop emerges from soil and in herbicides before or after crop emerges
Acetophenone		Attractant
Adenosine (CAS Reg. No. 58-61-7)	Maximum of 0.5% of formulation	Synergist
Alder bark		Seed germination stimulator
α-Alkyl (C₁₂-C₁₈)-ω-hydroxypoly(oxyethylene) copolymers with poly(oxypropylene); polyoxyethylene content averages 3-12 moles and polyoxypropylene content 2-9 moles		Surfactants, related adjuvants of surfactants
α-Alkyl (C₁₀-C₁₆)-ω-hydroxypoly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the poly(oxyethylene) content averages 3-20 moles		Surfactants, related adjuvants of surfactants
α-Alkyl (C₁₂-C₁₅)-ω-hydroxypoly(oxyethylene) sulfosuccinate, isopropylamine and N-hydroxyethyl isopropylamine salts of; the poly(oxyethylene) content averages 3-12 moles	Not more than 0.2% in the final solution	Emulsifiers in pesticide concentrates applied with liquid fertilizer solutions before crop emerges from soil or not later than 4 weeks after planting
α-Alkyl(C₁₀-C₁₂)-ω-hydroxpoly(oxyethylene) poly(oxypropylene) copolymer; poly(oxyethylene) content is 11-15 moles; poly(oxyproplene) content is 1-3 moles		Surfactants, related adjuvants of surfactants.
α-Alkyl(C₁₂-C₁₈)-ω-hydroxypoly(oxyethylene/oxypropylene) hetero polymer in which the oxyethylene content averages 13-17 moles and the oxypropylene content averages 2-6 moles		Do.
α-Alkyl (C₁₀-C₁₆)-ω-hydroxypoly (oxyethylene)poly(oxypropylene) mixture of di- and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the combined poly(oxyethylene) poly(oxypropylene) content averages 3-20 moles		Do.
α-Alkyl (C₁₂-C₁₈)-ω-hydroxypoly(oxyethylene/oxypropylene) hetero polymer in which the oxyethylene content is 8-12 moles and the oxypropylene content is 3-7 moles		Do.
Start Printed Page 23125
α-Alkyl (C₁₂-C₁₅)-ω-hydroxypoly(oxyethylene/oxypropylene) hetero polymer in which the oxyethylene content is 8-13 moles and the oxypropylene content is 7-30 moles		Solvent, cosolvent, surfactant, and related adjuvants of surfactants
α-Alkyl (C₂₁-C₇₁)-ω-hydroxypoly (oxyethylene) in which the poly(oxyethylene) content is 2 to 91 moles and molecular weight range from 390 to 5,000	Not to exceed 10%	Wetting agent or granule coating
n-Alkyl(C₈-C₁₈)amine acetate		Surfactants, related adjuvants of surfactants
Almond, bitter		Attractant
Aluminum 2-ethylhexanoate	Not more than 0.25% of pesticide formulation	Gelling agent
Aluminum sulfate		Safener adjuvant
Amine salts of alkyl(C₈-C₂₄) benzenesulfonic acid (butylamine, dimethylaminopropylamine, mono- and diisopropylamine, mono-, di-, and triethanolamine)		Surfactants, related adjuvants of surfactants
N-(Aminoethyl) ethanolamine salt of dodecylbenzenesulfonic acid	For use only in liquid emulsifiable herbicide concentrates	Do.
Ammonium nitrate (CAS Reg. No. 6484-52-2)		Adjuvant/ intensifier for herbicides
Ammonium polyphosphate (CAS Reg. No. 68333-79-9)		Sequestrant, buffer, or surfactant
Ammonium thiocyanate		Adjuvant/intensifier for defoliation of, and weed control in/on cotton and soybeans
Animal waste material (produced by the thermophilic digestion of cattle and poultry manure)	E. coli and Salmonella free; heavy metal content not to exceed the following: Material/Concentration (ppm): As/12.5; Cd/12.0; Cu/14.0; Pb/17.0; Hg/0.1; Se/0.2	Carrier
Barium sulfate		Carrier
1,2-Benzisothiazolin-3-one	Not more than 0.1% of formulation. Not more than 0.02 lb to be applied per acre	Preservative/stabilizer
N,N-Bis[α-ethyl-ω-hydroxypoly(oxyethylene) alkylamine; the poly(oxyethylene) content averages 3 moles; the alkyl groups (C₁₄-C₁₈) are derived from tallow, or from soybean or cottonseed oil acids		Surfactants for preemergence use with herbicides on sugarcane only
N,N-Bis(2-hydroxyethyl)alkylamine, where the alkyl groups (C₈-C₁₈) are derived from coconut, cottonseed, soya, or tallow acids		Surfactants, related adjuvants of surfactants
N,N-Bis 2-(ω-hydroxypolyoxyethylene) ethyl) alkylamine; the reaction product of 1 mole N,N-bis(2-hydroxyethyl)alkylamine and 3-60 moles of ethylene oxide, where the alkyl group (C₈-C₁₈) is derived from coconut, cottonseed, soya, or tallow acids		Do.
N,N-Bis-2-(ω-hydroxypolyoxyethylene/polyoxypropylene) ethyl alkylamine; the reaction product of 1 mole of N,N-bis(2-hydroxyethyl alkylamine) and 3-60 moles of ethylene oxide and propylene oxide, where the alkyl group (C₈-C₁₈) is derived from coconut, cottonseed, soya, or tallow acids		Surfactant, related adjuvants of surfactants
Boric acid		Sequestrant
Buffalo gourd root powder (Cucurbita foetidissima root powder); or, Zucchini juice (Cucurbita pepo juice) or Hawkesbury melon Citrullus lanatus.	No more than 2.5 lbs/acre/season (3.4 gm/acre/season of Cucurbitacin)	Gustatory stimulant
Butoxytriethylene glycol phosphate		Surfactants for arsenical herbicide formulations only
1,3-Butylene glycol dimethyacrylate	Not more than 0.1% of pesticide formulation	Stabilizer
Butyl stearate		Defoamer
γ-Butyrolactone		Solvent
C.I. Pigment Blue #15 (CAS Reg. No. 147-14-8; containing no more than 50 ppm polychlorinated biphenyls (PCBs))	For seed treament use only	Dye, coloring agent
C.I. Pigment Green #7 (CAS Reg. No. 1328-53-6; containing no more than 50 ppm polychlorinated biphenyls (PCBs))	For seed treatment use only	Dye, coloring agent
C.I. Pigment Violet #23 (CAS Reg. No. 6358-30-1; containing no more than 20 ppb of polychlorinated dibenzo-p-dioxins and/or polychlorinated dibenzofurans)	For seed treatment use only	Dye, coloring agent
Start Printed Page 23126
Calcium and sodium salts of certain sulfonated petroleum fractions (mahogany soaps); calcium salt molecular weight (in amu) 790-1,020, sodium salt molecular weight (in amu) 400-500		Surfactants, related adjuvants of surfactants
Camphor (CAS Reg. No. 76-22-2)	Not more than 5% weight to weight (w/w) of pesticide formulations	Deodorant, melting point adjustment
Carous chloride	10 ppm in formulation	Tagging agent
Carrageenan, conforming to 21 CFR 172.260	Not more than 0.15% of pesticide formulation	Thickener and stabilizer for pesticide formulations applied to seeds before planting
Chlorobenzene	Contains not more than 1% impurities. Not for use after edible parts of plant begin to form. Do not graze livestock in treated areas within 48 hours after application	Solvent, cosolvent
5-Chloro-2-methyl-4-isothiazolin-3-one (in combination with 2-methyl-4-isothiazolin-3-one)	Not more than 0.0022% (22.5 ppm) in the formulation; 0.00022% (or 2.25 ppm) in the final solution applied to growing crops	Preservative
Condensation product of orthophenylphenol with 5 moles of ethylene oxide		Stabilizer.
Copper naphthenate	Not more than 2.5% of formulation; application limited to before edible portions of plants begin to form	Mercaptan scavenger in technical pesticide
Copper salts of neodecanoic acid and 2-ethylhexanoic acid	Not more than 1% of formulation; application limited to before edible portions of plants begin to form	Do.
Cyclohexane		Solvent, cosolvent
Cyclohexanol		Do.
Cyclohexanone		Do.
Cysteine (CAS Reg. No. 52-90-4)	Maximum of 0.5% of formulation	Synergist
D&C Green No. 6		Dye
D&C Red No. 17, technical grade		Dye
D&C Red No. 33 (CAS Reg. No. 3567-66-6); meeting the specifications listed in 21 CFR 74.1333		Dye
D&C Violet No. 2, technical grade	Not more than 0.005% of pesticide formulation	Dye
n-Decyl alcohol		Do.
Diacetone alcohol		Deactivator, solvent for formulations used before crop emerges from soil
Diallyl phthalate	Not more than 0.1% of pesticide formulation	Stabilizer
Diammonium phosphate (CAS Reg. No. 7783-28-0)		Buffer, surfactant
α-(Di-sec-butyl)phenylpoly(oxypropylene) block polymer with poly(oxyethylene); the poly(oxypropylene) content averages 4 moles, the poly(oxyethylene) content averages 5 to 12 moles, the molecular		Surfactants, related adjuvants of surfactants
Diethanolamine		Stabilizer, inhibitor for formulations used before crop emerges from soil
Diethylene glycol		Deactivator, adjuvant for formulations used before crop emerges from soil
Diethylene glycol and diethylene glycol monobutyl, monoethyl, and monomethyl ethers		Deactivator for formulations used before crop emerges from soil, stabilizer
3,6-Dimethyl-4-octyn-3,6-diol	In pesticide formulations, for soil prior to planting or to plants before edible parts form	Surfactants, related adjuvants of surfactants
Dimethyl sulfoxide		Solvent or cosolvent for formulations used before crop emerges from soil or prior to formation of edible parts of food plants
Dipotassium hydrogen phosphate		Buffering agent
Dipropylene glycol dibenzoate	For seed treatment use only	Solvent, cosolvent
Dipropylene glycol monomethyl ether		Stabilizer
Disodium 4-isodecyl sulfosuccinate		Surfactants related adjuvants of surfactants.
Dodecylphenol		Coupling agent in emulsifier
Start Printed Page 23127
α-Dodecylphenol-ω-hydroxypoly(oxyethylene/oxypropylene) hetero polymer where ethylene oxide content is 11-13 moles and oxypropylene content is 14-16 moles, molecular weight (in amu) averages 600 to 965		Surfactants, related adjuvants of surfactants
Douglas-fir bark, ground		Solid diluent, carrier
Dysprosium chloride	10 ppm in formulation	Tagging agent
Ethylene glycol		Antifreeze, deactivator for all pesticides used before crop emerges from soil and in herbicides before or after crop emerges
Ethylene glycol monobutyl ether
Ethylene glycol monomethyl ether		Solvent for formulations used before crop emerges from soil
2-Ethylhexanol		Cosolvent, defoamer, solvent for all pesticides used before crop emerges from soil and in herbicides before or after crop emerges
Ethyl methacrylate		Surfactants, related adjuvants of surfactants
Europic chloride	10 ppm in formulation	Tagging agent
FD&C Red No. 40 (CAS Reg. No. 25956-17-6)	For seed treatment use only. Not to exceed 2% by weight of the pesticide formulation	Dye, coloring agent
Ferric chloride		Not greater than 2% of suspending, dispersing agent, pesticide formulation
Fluoroapatite		Solid diluent, carrier
Folic acid (CAS Reg. No. 59-30-3)	Maximum of 0.5% of formulation	Synergist
Furfural byproduct (a granular steam-acid sterilized, lignocellulosic residuum in the extraction of furfural from corn cobs, sugarcane bagasse, cottonseed hulls, oat hulls, and rice hulls)		Solid diluent, carrier
Gluconic acid (and sodium salt)		Sequestrant
l-Glutamic acid (C₅ H₉ NO_4; CAS Reg. No. 56-86-0)	Seet treatment use only	Plant nutrient
Glutamine (CAS Reg. No. 56-85-9)	Maximum of 0.5% of formulation	Synergist
Glycerol—propylene oxide polymer (CAS Reg. No. 25791-96-2)		Component in water-soluble film
Glyceryl triacetate		Stabilizer
Glyceryl tris-12-hydroxystearate		Flow control agent
Graphite		Treatment aid for seeds
Hexamethylenetetramine		Stabilizer for carriers in solid pesticide formulations
2-Hydroxy-4-n-octoxybenzophenone (CAS Reg. No. 1843-05-6)	Not more than 0.2 pt of pesticide formulation	Light stabilizer
Hydroxypropyl guar gum		Thickener
Isoamyl acetate	Not more than 0.5% of pesticide formulation	Odor-masking agent
Isobornyl acetate		Solvent
Isobutyl alcohol		Do.
Isobutylene-butene copolymers	For soil application only	Binder
Isooctadecanol	Not more than 2% of pesticide formulation	Defoaming agent
Isophorone (CAS Reg. No. 78-59-1)		Solvent, cosolvent
Isopropylbenzene		Solvent, cosolvent
Isopropylbenzenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts		Surfactants and related adjuvants of surfactants
Lanthanum chloride	10 ppm in formulation	Tagging agent.
(3-Lauramidopropyl) trimethylammonium methyl sulfate	Not more than 2.6% in the formulation. Not to be applied within 7 days of harvest	Antistatic agent
Linoleic diethanolamide (CAS Reg. No. 56863-02-6)		Surfactant
Magnesium nitrate (in combination with 2-methyl-4-isothiazolin-3-one and 5-chloro-2-methyl-4-isothiazolin-3-one)	None	Preservation
Maleic acid and maleic anhydride	For pesticide formulations applied to apples with a minimum preharvest interval of 21 days	Stabilizer
Manganese carbonate		Plant nutrient
Mesityl oxide	Not for use after edible parts of plant begin to form. Do not graze livestock in treated areas within 48 hours after application	Solvent, cosolvent
Start Printed Page 23128
Methionine (CAS Reg. No. 59-51-8)	Maximum of 0.5% of formulation	Synergist
Methyl alcohol		Do.
Methyl bis(2-hydroxyethyl)alkyl ammonium chloride, where the carbon chain (C₈-C₁₈) is derived from coconut, cottonseed, soya, or tallow acids		Surfactant
α,α′-[Methylenebis]-4-(1,1,3,3-tetramethylbutyl)-o-phenylene bis[ω-hydroxypoly(oxyethylene)] having 6-7.5 moles of ethylene oxide per hydroxyl group		Solvent, cosolvent, surfactant, and related adjuvants of surfactants
Methylene blue		Dye for formulations used on cotton
Methyl ethyl ketone		Surfactant
Methyl p- hydroxybenzoate		Preservative for formulations
Methyl isoamyl ketone		Solvent, cosolvent
Methyl isobutyl ketone		Do.
2-Methyl-4-isothiazolin-3-one (in combination with 5-chloro-2-methyl-4-isothiazolin-3-one)	Not more than 0.0022% (22.5 ppm) in the formulation; 0.00022% (or 2.25 ppm) in the final solution applied to growing crops	Preservative
Methyl methacrylate		Surfactants, related adjuvants of surfactants
Methylnaphthalenesulfonic acid—formaldehyde condensate, sodium salt		Dispersant
Methyl oleate		Surfactant
2-Methyl-2,4-pentanediol		Solvent for formulations used before crop emerges from soil
Methyl poly(oxyethylene) alkyl ammonium chloride, where the poly(oxyethylene) content is 3-15 moles and the alkyl group (C₈-C₁₈) is derived from coconut, cottonseed, soya, or tallow acids		Surfactant
N-Methylpyrrolidone (CAS Reg. No. 872-504)		Solvent, cosolvent
Methyl violet 2B		Dye
Mixed phytosterols (consisting of campesterol, sitosterol and stigmasterol, with minor amounts of associated plant sterols) derived from edible vegetable oils		Surfactant.
Mono- and bis-(1 H, 1 H, 2 H, 2 H-perfluoroalkyl) phosphates where the alkyl group is even numbered and in the C₆-C₁₂ range	Not more than 0.5% of pesticide formulation	Defoaming agent
Mono- and dialkyl (C₈-C₁₈) methylated ammonium chloride compounds, where the alkyl group(s) (C₈-C₁₈) are derived from coconut, cottonseed, soya, tallow, or hogfat fatty acids		Surfactants, related adjuvants of surfactants
Morpholine salt of dodecylbenzenesulfonic acid		Do.
Naphthalenesulfonic acid-formaldehyde condensate, ammonium and sodium salts		Do.
Nicotinamide (CAS Reg. No. 98-92-0)	Maximum of 0.5% of formulation	Synergist
α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene); produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 or 30-100 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range 4-14 or 30-100		Surfactant
X-(p- Nonylphenyl)-ω-hydroxy-poly(oxyethylene) sulfosuccinate isopropylamine and N- hydroxyethyl isopropylamine salts of: the poly(oxyethylene) content averages r moles	Not more than 0.2% in the final solution	Emulsifiers in pesticide concentrates applied with liquid fertilizer solutions before crop emerges from soil or not later than 4 weeks after planting
n- Octyl alcohol		Solvent, cosolvent
α-Oleoyl-ω-(oleoyloxy) poly(oxyethylene) derived from α-hydro-ω-hydroxypoly(oxyethylene) (molecular weight 600 amu)		Component of defoamers
Oxo-decyl acetate (CAS reg. No. 108419-33-6)		Solvent
Oxo-heptyl acetate (CAS Reg. No. 90438-79-2)		Solvent
Oxo-hexyl acetate (CAS Reg. No. 88230-35-7)		Solvent
Oxo-nonyl acetate (CAS Reg. No. 108419-34-7)		Solvent
Oxo-octyl acetate (CAS Reg. No. 108419-32-5)		Solvent
Oxo-tridecyl acetate (CAS Reg. No. 108419-35-8)		Solvent
Paraformaldehyde	Not more than 2% of pesticide formulation	Preservative for formulation
Partial sodium salt of N- lauryl-α-iminodipropionic acid	Not more than 1% of pesticide formulation	Surfactants, related adjuvants of surfactants
Phenol		Solvent, cosolvent
Start Printed Page 23129
Phenolic resins	Soil applications	Binding agent
Phenolsulfonic acid—formaldehyde—urea condensate and its sodium salt	Applied to growing plants only	Dispersant surfactant
(Phthalocyaninato (2)) copper; (C.I. pigment blue No. 15)	When used as a colorant in low-density plastic films	Coloring agent, pigment
Pigment red 48	For seed treatment use only	Dye
α-Pinene	Not more than 2% of formulation by weight	Stabilizer
Poly(methylene -p- nonylphenoxy)poly(oxypropylene) propanol; the poly(oxy-propylene) content averages 4-12 moles		Encapsulating agent
Poly(oxyethylene) adducts of mixed phytosterols (such sterols to consist of campesterol, stigmasterol and sitosterol with minor amounts of associated plant sterols) derived from edible vegetable oils; polyoxyethylene content averaging 5-26 moles		Surfactant, related adjuvants
Poly(oxyethylene) (5) sorbitan monooleate		Surfactants, related adjuvants of surfactants
Polysorbate 60, conforming to 21 CFR 172.836		Surfactant
Potassium carbonate		Buffering agent
Potassium dihydrogen phosphate		Do.
Primary n-alkylamines, where the alkyl group (C₈-C₁₈) is derived from coconut, cottonseed, soya, or tallow acids		Surfactant
Propylene dichloride		Solvent for formulations used before crop emerges from soil
Propylene glycol monomethyl ether		Solvent
Pyridoxine (CAS Reg. No. 65-23-6)	Maximum of 0.5% of formulation	Synergist
Rosin, dark wood (as defined in 21 CFR 178.3870(a)(1)(v))		Surfactants, related adjuvants of surfactants
Rosin, gum		Do.
Rosin, tall oil		Do.
Scandium chloride	10 ppm in formulation	Tagging agent
Sodium bisulfate (CAS Reg. No. 7681-38-1)		Acidifying/buffering agent
Sodium butyl naphthalenesulfonate		Surfactants, related adjuvants of surfactants
Sodium caseinate	Expires May 24, 2005.	Suspending agent and binder
Sodium 1,4-dicyclohexyl sulfosuccinate		Surfactants, related adjuvants of surfactants
Sodium 1,4-dihexyl sulfosuccinate		Do.
Sodium dihydrogen phosphate (CAS Reg. No. 7558-80-7) conforming to 21 CFR 182.6778		Buffering agent
Sodium 1,4-diisobutyl sulfosuccinate		Surfactants, related adjuvants of surfactants
Sodium 1,4-dipentyl sulfosuccinate		Do.
Sodium 1,4-ditridecyl sulfosuccinate		Do.
Sodium fluoride	Not more than 0.25% of pesticide formulation	Stabilizer carrier for formulations used before crop emerges from soil
Sodium metaborate		Sequestrant
Sodium molybdate		Plant nutrient
Sodium mono- and dimethyl naphthalenesulfonate; molecular weight (in amu) 245-260		Surfactants, related adjuvants of surfactants
Sodium nitrate		Solid diluent
Sodium nitrite	Not more than 3% of pesticide formulation	Stabilizer, inhibitor.
Sodium o-phenylphenate	Not more than 0.1% of pesticide formulation	Preservative for formulation
Sodium salt of the insoluble fraction of rosin		Surfactants, related adjuvants of surfactants
Sodium salt of partially or completely saponified dark wood rosin (as defined in 21 CFR 178.3870(a)(4))		Surfactants, related adjuvants of surfactants
Sodium tetraborate	Not more than 2% of pesticide formulation	Buffering agent; corrosion inhibitor
Sulfosuccinic acid ester with N- (2,-hydroxy-propyl) oleamide, ammonia and isopropylamine salts of	Not more than 0.2% in the final solution	Emulsifiers in pesticide concentrates applied with liquid fertilizer solutions before crop emerges from soil or not later than 4 weeks after planting
Tall oil diesters with polypropylene glycol (CAS Reg. No. 68648-12-4)		Component in water-soluble film
Tannin		Dispersing agent
Tertiary butylhydroquinone		Antioxidant
1-Tetradecanamine, N,N-dimethyl-, N-oxide (CAS Reg. No. 3332-27-2)		Component in water-soluble film
N,N,N′,N″-Tetrakis-(2-hydroxypropyl) ethylenediamine		Stabilizer for formulations used before crop emerges from soil
Start Printed Page 23130
α-[p- (1,1,3,3-Tetramethylbutyl)phenyl]-ω-hydroxypoly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding sodium salts of the phosphate esters; the poly(oxyethylene) content averages 6 to 10 moles		Surfactants, related adjuvants of surfactants
2,4,7,9-Tetramethyl-5-decyne 4,7-diol	In pesticide formulations, for application to soil prior to planting or to plants before edible parts form	Do.
Tetrapotassium pyrophosphate (CAS Reg. No. 7320-345)	Not to exceed 10% of formulation	Sequestrant, anticaking agent, conditioning agent
Tetrasodium N-(1,2-dicarboxyethyl)-N-octadecyl-sulfosuccinamate		Do.
[2,2′(2,5-Thiophenediyl) bis (5-tert-butylbenzoxazole)] (CAS Reg. Number 7128-64-5)	10 ppm in pesticide formulations	Quality control agent
Titanium dioxide (CAS Reg. No. 13463-67-7)		Pigment/coloring agent in plastic bags used to wrap growing banana (preharvest), colorant on seeds for planting
Toluene		Solvent, cosolvent
Toluenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts		Do.
Tri -tert- butylphenol polyglycol ether (molecular weight (in amu) 746)		Surfactant for formulations used before crop emerges from soil
Triethanolamine		Stabilizer, inhibitor for formulations used before crop emerges from soil
Triethylene glycol		Deactivator
Triethyl phosphate		Stabilizer for formulations used before crop emerges from soil
Trimethylolpropane (CAS Reg. No. 77-66-9)	Not more than 15% of the pesticide formulation	Component of water-soluble film
Trimethylolpropane (CAS Reg. No. 77-99-6)	Not to exceed 15% by weight of the film	Component in water-soluble film
α-[2,4,6-Tris[1-(phenyl)ethyl]phenyl]-ω-hydroxy poly(oxyethylene), the poly(oxyethylene) content averages 4-150 moles)	Not more than 15% of the formulation	Surfactant.
α-[2,4,6-Tris[1-(phenyl)ethyl]phenyl]-ω-hydroxy poly(oxyethylene); mixture of monohydrogen and dihydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, potassium, sodium, and zinc salts, the poly(oxyethylene) content averages 4-150 moles)	Not more than 15% of the formulation	Do.
α-[2,4,6-Tris[1-(phenyl)ethyl]phenyl]-ω-hydroxy poly(oxyethylene) sulfate, and the corresponding ammonium, calcium, magnesium, potassium, sodium, and zinc salts, the poly(oxyethylene) content averages 4-150 moles	Not more than 15% of the pesticide formulation	Do.
Tryptophan (CAS Reg. No. 73-22-3)	Maximum of 0.5% of formulation	Synergist
Valeric acid, normal	Not more than 2% in pesticide formulations	Stenching agent or odorant
Vanillin		Attractant
Woolwax alcohols		Safener
Xylene		Solvent, cosolvent
Xylenesulfonic acid its ammonium calcium, magnesium, potassium, sodium, and zinc salts		Surfactants, related adjuvants of surfactants
Yucca extract from Yucca schidigera		Wetting agent
Ytterbium chloride	10 ppm in formulation	Tagging agent
Yttrium chloride	10 ppm in formulation	Tagging agent
Zinc orthophosphate		Plant nutrient and safener
Zinc stearate, conforming to 21 CFR 182.5994 and 582.5994		Flow control agent

11. Section 180.930 is added to subpart D to read as follows:

§ 180.930

Inert ingredients applied to animals; exemptions from the requirement of a tolerance.

Inert ingredients	Limits	Uses
Acetic acid (CAS Reg. No. 64-19-7)	Not more than 0.5% of pesticide formulation	Catalyst
Acetic anhydride		Solvent, cosolvent, stabilizer
Acetyl tributyl citrate (CAS Reg. No. 77-90-7)		Component of plastic animal tags
Acetylated lanolin alcohol		Moisturizer
Alkanoic and alkenoic acids, mono- and diesters of α-hydro-ω-hydroxypoly(oxyethylene) with molecular weight (in amu) range of 200 to 6,000		Emulsifiers
Alkyl (C₈-C₂₄) benzenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts		Surfactants, emulsifier, related adjuvants of surfactants
α-Alkyl (C₉-C₁₈)-ω-hydroxy poly(oxyethylene): the poly(oxyethylene) content averages 2-20 moles		Solvent, cosolvent, surfactant, and related adjuvants of surfactants
α-Alkyl (C_12- C₁₅)-ω-hydroxypoly(oxyethylene/oxypropylene) hetero polymer in which the oxyethylene content is 8-13 moles and the oxypropylene content is 7-30 moles		Solvent, cosolvent, surfactant, and related adjuvants of surfactants
α-Alkyl (C₈-C₁₀) hydroxypoly(oxypropylene) block polymer with polyoxyethylene; polyoxypropylene content averages 3 moles and polyoxyethylene content averages 5-12 moles		Do.
α-Alkyl (C₆-C₁₄)-ω-hydroxypoly(oxypropylene) block copolymer with polyoxyethylene; polyoxypropylene content is 1-3 moles; polyoxyethylene content is 7-9 moles; average molecular weight (in amu) approximately 635		Surfactants, related adjuvants of surfactants
α-alkyl (C₁₂-C₁₅)-ω-hydroxypoly (oxypropylene)poly (oxyethylene)copolymers (where the poly(oxypropylene) content is 3-60 moles and the poly(oxyethylene) content is 5-80 moles), the resulting ethoxylated propoxylated (C₁₂-C₁₅) alcohols having a minimum molecular weight (in amu) of 1,500, CAS Reg. No. 68551-13-3	Not to exceed 20% of pesticide formulations	Surfactant
α-(p- Alkylphenyl)-ω-hydroxypoly (oxyethylene) produced by the condensation of 1 mole of alkylphenol (alkyl is a mixture of propylene tetramer and pentamer isomers and averages C₁₃) with 6 moles of ethylene oxide		Do.
Alkyl (C₈-C₁₈) sulfate and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts		Do.
Amine salts of alkyl (C₈-C₂₄) benzenesulfonic acid (butylamine; dimethylamino propylamine; mono- and diisopropyl- amine; and mono-, di-, and triethanolamine)		Do.
Ascorbyl palmitate		Preservative
Attapulgite-type clay		Solid diluent, carrier
Barium sulfate (CAS Reg. No. 7727-43-7)		Carrier, density control agent
Benzoic acid		Preservative for formulations
Butane		Propellant
n-Butanol (CAS Reg. No. 71-36-3)		Solvent for blended emulsifiers
Butylated hydroxyanisole		Antioxidant
Butylated hydroxytoluene		Do.
α-(p-tert- Butylphenyl)-ω-hydroxypoly (oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the poly(oxyethylene) content averages 4-12 moles		Surfactants, related adjuvants of surfactants
Calcium carbonate		Solid diluent, carrier
Calcium chloride		Stabilizer
Calcium silicate, hydrated calcium silicate		Anticaking agent, solid diluent, carrier
Calcium stearate (CAS Reg. No. 1592-23-0)		Stabilizer, component of plastic animal tag
Calcium sulfate		Solid diluent, carrier
Calcium and sodium salts of certain sulfonated petroleum fractions (mahogany soaps); calcium salt molecular weight (in amu) 790-1,020, sodium salt molecular weight (in amu) 400-500		Surfactants, related adjuvants of surfactants
Carbon black (CAS Reg. No. 1333-86-4)		Colorant/pigment in animal tag
Carnauba wax (CAS Reg. No. 8015-86-9)		Binder
Carrageenan, conforming to 21 CFR 172.620	Minimum molecular weight (in amu): 100,000	Thickener
Cumene (isopropylbenzene)		Solvent, cosolvent
Cyclohexanone		Do.
Start Printed Page 23132
D&C Green No. 6		Dye, coloring agent
D&C Red No. 17		Do.
D&C Violet No. 2		Do.
Diacetyl tartaric acid esters of mono- and diglycerides of edible fatty acids		Emulsifier
Dialkyl (C₈-C₁₈) dimethylammonium chloride	Not more than 0.2% in silica hydrated silica	Flocculating agent in the manufacture of silica hydrated silica for use as a solid diluent, carrier
Diatomite (diatomaceous earth)		Solid diluent, carrier
Dibutyltin dilaurate (CAS Reg. No. 77-58-7)		Component of plastic slow release tag
Dichlorodifluoromethane		Propellant
Diethylphthalate		Solvent, cosolvent
1,1-Difluoroethane (CAS Reg. No. 75-37-6)	For aerosol pesticide formulations used for insect control in food- and feed-handling establishments and animals	Aerosol propellant
Dimethyl ether (CAS Reg. No. 115-10-6)		Propellant
3,6-Dimethyl-4-octyne-3,6-diol	Not more than 2.5% of pesticide formulation	Surfactants, related adjuvants of surfactants
Dimethylpolysiloxane (CAS Reg. No. 9016-00-6)		Defoaming agent
α-(o,p-Dinonylphenyl)-ω-hydroxypoly (oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 moles		Surfactants, related adjuvants of surfactants
α-(o,p-Dinonylphenyl)-ω-hydroxypoly (oxyethylene), produced by the condensation of 1 mole of dinonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 moles of ethylene oxide		Do.
Dipropylene glycol monomethyl ether		Do.
Dodecylbenzenesulfonic acid, amine salts		Do.
α-(p-Dodecylphenyl)-ω-hydroxypoly (oxyethylene) produced by the condensation of 1 mole of dodecylphenol (dodecyl group is a propylene tetramer isomer) with an average of 4-14 or 30-70 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4-14 or 30-70 moles		Surfactants, emulsifier
Epoxidized soybean oil (CAS Reg. No. 8013-07-8)		Stabilizer, plasticizer, component animal tag
Ethyl alcohol		Solvent, cosolvent
Ethylene oxide adducts of 2,4,7,9-tetramethyl-5-decynediol, the ethylene oxide content averages 3.5, 10, or 30 moles		Surfactants, related adjuvants of surfactants
2-Ethyl-1-hexanol	Not more than 2.5% of pesticide formulation	Solvent, adjuvant of surfactants
Ethyl vinyl acetate (CAS Reg. No. 24937-78-8)		Component of plastic slow release tag
FD&C Blue No. 1		Dye, coloring agent
FD&C Yellow No. 6 Aluminum Lake (CAS Reg. No. 15790-07-5)	Not more than 2% by weight of pesticide formulation	Pigment in animal tag and similar slow-release devices
Glycerol (glycerin)	Meets specifications of Food Chemicals Codex	Solvent and thickener
Glycerol monooleate		Surfactants, related adjuvants of surfactants
Glyceryl monostearate		Emulsifier
Glyceryl tris-12-hydroxystearate		Flow control agent
Graphite		Solid diluent, carrier
n-Hexyl alcohol (CAS Reg. No. 111-27-3)		Solvent, cosolvent
2-(2′-Hydroxy-5′-methylphenyl)benzotriazole (CAS Reg. No. 2440-22-4)	Not more than 0.5% by weight of pesticide formulation	Ultraviolet light absorber/stabilizer in animal tag and similar slow-release devices
Iron oxide (CAS Reg. No. 1309-37-1)		Colorant in pesticide formulations for animal tags
Isopropyl alcohol		Solvent, cosolvent
4,4′-Isopropylidenediphenol alkyl (C₁₂-C₁₅) phosphites (CAS Reg. No. 92908-32-2)	Not to exceed 1% of polymer	Stabilizer, component animal tag
Isopropyl myristate, CAS Reg. No. 110-27-0		Solvent
Kaolinite-type clay		Solid diluent, carrier
Kerosene, U.S.P. reagent		Solvent, cosolvent
Lactic acid		Solvent
α-Lauryl-ω-hydroxypoly(oxyethylene), average molecular weight (in amu) of 600		Emulsifier
Start Printed Page 23133
α-Lauryl-ω-hydroxypoly(oxyethylene) sulfate, sodium salt; the poly(oxyethylene) content is 3-4 moles		Surfactants, related adjuvants of surfactants
Lignosulfonate: ammonium, calcium, magnesium, potassium, sodium, and zinc salts		Surfactants, related adjuvants of surfactants
d-Limonene (CAS Reg. No. 5989-27-5)		Solvent, fragrance
Magnesium carbonate		Solid diluent, carrier
Magnesium silicate, hydrated magnesium silicate		Do.
Manganous oxide		Do.
Methyl alcohol		Solvent, cosolvent
Methyl n-amyl ketone (CAS Reg. No. 110-43-0)		Solvent, cosolvent
α-(Methylene (4-(1,1,3,3-tetramethylbutyl)-o- phenylene) bis-ω-hydroxypoly(oxyethylene) having 6-7.5 moles of ethylene oxide per hydroxyl group		Surfactants, related adjuvants of surfactants
Methyl esters of higher fatty acids conforming to 21 CFR 573.640		Antidusting agent
Methyl-p-hydroxybenzoate (Methyl paraben)	Meets specifications of Food Chemicals Codex; not to exceed 0.1% in formulations	Preservative
Methyl isobutyl ketone		Solvent, cosolvent
2-[Methyl [(perfluoroalkyl)alkyl(C₂-C₈)sulfonyl] amino]alkyl(C₂-C₈) acrylate—alkyl(C₂-C₈) methacrylates-N-methylolacrylamide copolymer		Water repellant agent
Mineral oil, U.S.P., or conforming to 21 CFR 172.878 or 178.3620(a), (b)		Solvent, diluent
Mono-, di-, and trimethylnaphthalenesulfonic acids-formaldehyde condensates, sodium salts	Not to exceed 0.006% in final formulation	Dispersing-wetting agent in dip vat operations for large animals, such as cattle
Montmorillonite-type clay		Solid diluent, carrier
Naphthalenesulfonic acid and its sodium salt		Surfactants, related adjuvants of surfactants
Nitrile rubber modified acrylonitrile methylacrylate (CAS Reg. No. 27012-62-0) conforming to 21 CFR 177.1480		Component of plastic slow release tag
Nonyl, decyl, and undecyl glycoside mixture with a mixture of nonyl, decyl, and undecyl oligosaccharides and related reaction products (primarily decanol and undecanol) produced as an aqueous-based liquid (50 to 65% solids) from the reaction of primary alcohols (containing 15 to 20% secondary alcohol isomers) in a ratio of 20% C_9, 40% C_10, and 40% C₁₁ with carbohydrates (average glucose to alkyl chain ratio 1.3 to 1.8)		Surfactant
α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 moles		Surfactants, related adjuvants of surfactants
α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-15 or 30-90 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4-15 or 30-90 moles		Surfactants, emulsifier, related adjuvants of surfactants.
α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) sulfate, and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4 moles		Surfactants, related adjuvants of surfactants
α-(p-Nonylphenyl)-ω-hydroxypoly(oxyethylene) sulfate, and its ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 or 30-90 moles of ethyiene oxide		Surfactants, related adjuvants of surfactants
Octadecyl 3,5-di-tert-butyl-4-hydroxyhydro cinnamate (CAS Reg. No. 2082-79-3)	Not more than 0.5% by weight of pesticide formulation	Thermal stabilizer/antioxidant in animal tag and similar slow-release devices
Octyl and decyl glucosides mixture with a mixture of octyl and decyl oligosaccharides and related reaction products (primarily n-decanol) produced as an aqueous-based liquid (68-72% solids) from the reaction of straight chain alcohols (C₈ (45%), C₁₀) with anhydrous glucose		Do.
Start Printed Page 23134
Octyl epoxytallate (CAS Reg. No. 61788-72-5)		Plasticizer, component animal tag
Oleic acid, conforming to 21 CFR 172.862 (CAS Reg. No. 112-80-1)		Defoaming agent
α-Oleoyl-ω-hydroxypoly(oxyethylene), average molecular weight (in amu) of 600		Emulsifier
α-Oleoyl-ω-(oleyloxy)poly(oxyethylene) derived from α-hydro-ω-hydroxypoly(oxyethylene), molecular weight (in amu) 600		Emulsifier, defoaming agent
Oxidized pine lignin, sodium salt (CAS Reg. No. 68201-23-0)	Maximum of 2% of formulation	Surfactant, related adjuvant of surfactant
Paraformaldehyde	Not more than 2% of pesticide formulation	Preservative for formulation
Petroleum hydrocarbons, light, odorless, conforming to 21 CFR 172.884 or 178.3650		Solvent, diluent
Petroleum hydrocarbons, synthetic isoparaffinic, conforming to 21 CFR 172.882 or 178.3530		Do.
Phenol		Solvent, cosolvent
Pine lignin		Adsorbent
α-Pinene	Not more than 2% of formulation by weight	Stabilizer
Polyethylene (CAS Reg. No. 9002-88-4) conforming to 21 CFR 172.615		Component of plastic slow release tag
Polyethylene esters of fatty acids, conforming to 21 CFR 172.854		Surfactants, related adjuvants of surfactants
Polyethylene glycol [α-hydro-ω-hydroxypoly(oxyethylene)]; mean molecular weight (in amu) 194 to 9,500 conforms to 21 CFR 178.3750		Surfactants, related adjuvants of surfactants
Polyglyceryl phthalate esters of coconut oil fatty acids		Do.
Poly(methylene -p-tert- butylphenoxy)poly(oxyethylene) ethanol; the poly(oxyethylene) content averages 4-12 moles		Do.
Poly(methylene-p-nonylphenoxy)poly(oxyethylene) ethanol; the poly(oxyethylene) content averages 4-12 moles		Do.
Poly(methylene -p- nonylphenoxy)poly(oxypropylene) propanol; the poly(oxypropylene) content averages 4-12 moles		Do.
Potassium hydroxide	Meeting Food Chemicals, Codex specifications	Neutralizer
Propane		Propellant
n-Propanol		Solvent, for blended emulsifiers
2-Propenoic acid, 2-methyl-, polymer with ethyl 2-propenoate and methyl 2-methyl-2-propenoate, ammonium salt (CAS Registration No. 55989-05-4), minimum number average molecular weight (in amu), 18,900.		Encapsulating agent,dispensers, resins, fibers and beads
Propylene glycol		Solvent, cosolvent
Propylene glycol monomethyl ether		Deactivator, emmolient
Propyl gallate		Antioxidant
Propyl p-hydroxybenzoate (Propyl paraben)	Meets specifications of Food Chemicals Codex; not to exceed 0.1% in formulations	Preservative
Pyrophylite		Solid diluent, carrier
Rhodamine B	Expires December 27, 2004.	Dye for use in ear tags only
Secondary alkyl (C₁₁-C₁₅) poly(oxyethylene) acetate, sodium salt; the ethylene oxide content averages 5 moles		Surfactant
Silica, hydrated silica		Anticaking agent, solid diluent, carrier
Silica aerogel (finely powdered microcellular silica foam having a minimum silica content of 89.5%)		Component of antifoaming agent
Soapstone		Solid diluent
Sodium benzoate (CAS Reg. No. 532-32-1)		Anticaking agent/stabilizer/preservative
Sodium butylnaphthalenesulfonate		Not more than 0.5% of pesticide formulation
Sodium diisobutylnaphthalenesulfonate		Surfactants, related adjuvants of surfactants
Sodium dioctylsulfosuccinate		Do.
Sodium hydroxide		Neutralizer
Sodium isopropylisohexylnaphthalenesulfonate		Surfactants, related adjuvants of surfactants
Sodium isopropylnaphthalenesulfonate		Do.
Sodium monoalkyl and diakyl (C₈-C₁₃) phenoxybenzenedisulfonate mixtures containing not less than 70% of the monoalkylated product		Do.
Sodium mono- and dimethylnaphthalenesulfonate, molecular weight (in amu) 245-260		Do.
Start Printed Page 23135
Sodium mono-, di-, and tributylnaphthalenesulfonates		Solvent, cosolvent stabilizer
Sodium N-oleoyl-N-methyl taurine	Not more than 1% of pesticide formulations	Surfactant
Sodium starch glycolate (CAS Reg. No. 9063-38-1)	Granular and tableted products only; not to exceed 8% of the formulated product	Disintegrant
Sodium sulfate		Solid diluent, carrier
Sorbitan fatty acid esters (fatty acids limited to C_12, C_14, C_16, and C₁₈ containing minor amounts of associated fatty acids) and poly(oxyethylene) derivatives of sorbitan fatty acid esters; the poly(oxyethylene) content averages 16-20 moles		Buffering agent; corrosion inhibition
Sorbitol		Antidusting agent.
Soy protein, isolated	Expires May 24, 2005.	Adhesive
Stearic acid (CAS Reg. No. 57-11-4)		Lubricant, component animal tag
α-Stearoyl-ω-hydroxypoly(oxyethylene), average molecular weight (in amu) of 600		Emulsifier
α-Stearoyl-ω-hydroxypoly(oxyethylene); the poly(oxyethylene) content averages 8, 9, or 40 moles; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be 8, 9, or 40		Surfactants; related adjuvants of surfactants
Sulfur (CAS Reg. No. 7704-34-9)		Stabilizer
Talc		Do.
Tall oil; fatty acids not less than 58%, rosin acids not more than 44%, unsaponifiables not more than 8%		Surfactants, related adjuvants of surfactants
Tartrazine		Dye, coloring agent
α-[p-(1,1,3,3-Tetramethylbutyl)phenyl]-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p (1,1,3,3-tetramethylbutyl)phenol with a range of 1-14 or 30-70 moles of ethylene oxide: if a blend of products is used, the average range number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 1-14 or 30-70		Surfactants, related adjuvants of surfactants
α-[p- (1,1,3,3-Tetramethylbutyl)phenyl]-ω-hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-(1,1,-3,3-tetramethylbutyl) phenol with an average of 4-14 or 30-70 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4-14 or 30-70		Surfactants, related adjuvants of surfactants
2,4,7,9-Tetramethyl-5-decyne-4.7-diol	Not more than 2.5% of pesticide formulation	Do.
Titanium dioxide (CAS Reg. No. 13463-67-7)		Pigment/colorant in pesticide formulations for animal tag
Toluenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts		Do.
Triacetin (glyceryl triacetate)		Solvent, cosolvent
Tri-tert-butylphenol polyglycol ether (molecular weight (in amu) 746)		Dispersing agent
1,1,1-Trichloroethane		Solvent, cosolvent
Trichlorofluoromethane		Propellant
Tridecylpoly(oxyethylene) acetate sodiums salt; where the ethylene oxide content averages 6-7 moles		Surfactants, related adjuvants of surfactants
Triethylene glycol diacetate (CAS Reg. No. 111-21-7)	For use on beef cattle only	Solvent
Trisodium phosphate		Precipitant, buffer, filler
Ultramarine blue(CAS Reg. No. 57455-37-5)	Not more than 1.5% of pesticide formulation	Pigment/colorant in animal tag
Wheat shorts	Expires May 24, 2005.	Solid diluent
Wood rosin acid, potassium salts, conforming to 21 CFR 178.3870		Surfactants, related adjuvants of surfactants
Xylene		Solvent, cosolvent
Xylenesulfonic acid and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts		Surfactants, related adjuvants of surfactants
Zinc oxide		Solid diluent, carrier
Zinc stearate, conforming to 21 CFR 182.5994 and 582.5994		Water repellant, dessicant, and coating agent.
Zinc stearate (CAS Reg. No. 557-05-1)		Water repellant, desiccant, and coating agent; stabilizer, component of plastic animal tag
Start Printed Page 23136
Zinc sulfate (basic and monohydrate)		Water repellant, dessicant, and coating agent

12. Section 180.940 is added to subpart D to read as follows:

§ 180.940

Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions).

Residues of the following chemical substances are exempted from the requirement of a tolerance when used in accordance with good manufacturing practice as ingredients in an antimicrobial pesticide formulation, provided that the substance is applied on a semi-permanent or permanent food-contact surface (other than being applied on food packaging) with adequate draining before contact with food.

(a) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-contact surfaces in public eating places, dairy-processing equipment, and food-processing equipment and utensils.

Pesticide Chemical	CAS Reg. No.	Limits
Acetic acid	64-19-7	When ready for use, the end-use concentration is not to exceed 290 ppm
α-Alkyl(C₁₀-C₁₄)-ω-hydroxypoly (oxyethylene) poly(oxypropylene) average molecular weight (in amu), 768 to 837	None	None
α-Alkyl(C₁₂-C₁₈)-ω-hydroxypoly (oxyethylene) poly(oxypropylene) average molecular weight (in amu), 950 to 1120	None	None
Ammonium chloride	12125-02-9	When ready for use, the end-use concentration is not to exceed 48 ppm
Ethanol	64-17-5	None
Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt	64-02-8	None
Hydrogen peroxide	7722-84-1	When ready for use, the end-use concentration is not to exceed 91 ppm
Hypochlorous acid, sodium salt	7681-52-9	When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Iodine	7553-56-2	When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Magnesium oxide	1309-48-4	None
Methylene blue	61-73-4	When ready for use, the end-use concentration is not to exceed 0.4 ppm
α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles)	None	None
Octadecanoic acid, calcium salt	1592-23-0	None
1-Octanesulfonic acid, sodium salt	5324-84-5	When ready for use, the end-use concentration is not to exceed 46 ppm
Octanoic acid	124-07-2	When ready for use, the end-use concentration is not to exceed 52 ppm
Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900	9003-11-6	None
Peroxyacetic acid	79-21-0	When ready for use, the end-use concentration is not to exceed 58 ppm
Peroxyoctanoic acid	33734-57-5	When ready for use, the end-use concentration is not to exceed 52 ppm
Phosphonic acid, (1-hydroxyethylidene)bis-	2809-21-4	When ready for use, the end-use concentration is not to exceed 14 ppm
Phosphoric acid, trisodium salt	7601-54-9	When ready for use, the end-use concentration is not to exceed 5916 ppm
Potassium bromide	7758-02-3	When ready for use, the end-use concentration is not to exceed 46 ppm total available halogen
Potassium iodide	7681-11-0	When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Potassium permanganate	7722-64-7	When ready for use, the end-use concentration is not to exceed 0.7 ppm
2-Propanol (isopropanol)	67-63-0	None
Quaternary ammonium compounds, alkyl (C₁₂-C₁₈) benzyldimethyl, chlorides	8001-54-5	When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound
Quaternary ammonium compounds, n-alkyl (C₁₂-C₁₄) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384	None	When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound
Start Printed Page 23137
Quaternary ammonium compounds n-alkyl (C₁₂-C₁₈) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384	None	When ready for use, the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound
Quaternary ammonium compounds di-n-alkyl (C₈-C₁₀) dimethyl ammonium chloride, average molecular weight (in amu), 332 to 361	None	When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 150 ppm of active quaternary compound; the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound
Sodium bicarbonate	144-55-8	None
Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate)	151-21-3	When ready for use, the end-use concentration is not to exceed 3 ppm
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt	2893-78-9	When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine

(b) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Dairy processing equipment, and food-processing equipment and utensils.

Pesticide Chemical	CAS Reg. No.	Limits
Acetic acid	64-19-7	When ready for use, the end-use concentration is not to exceed 686 ppm
Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide	68608-66-2	When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid
Benzenesulfonic acid, dodecyl-	27176-87-0	When ready for use, the end-use concentration is not to exceed 5.5 ppm
Butanedioic acid, octenyl-	28805-58-5	When ready for use, the end-use concentration is not to exceed 156 ppm
Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400	None	None
Calcium chloride	10043-52-4	When ready for use, the end-use concentration is not to exceed 17 ppm
n-Carboxylic acids (C₆-C₁₂), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acid	None	When ready for use, the end-use concentration is not to exceed 39 ppm
Decanoic acid	334-48-5	When ready for use, the end-use concentration is not to exceed 90 ppm
Ethanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt	132-43-4	When ready for use, the end-use concentration is not to exceed 237 ppm
Ethylenediaminetetraacetic acid (EDTA), disodium salt	139-33-3	When ready for use, the end-use concentration is not to exceed 1400 ppm
FD&C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705)	1934-21-0	None
D-Gluconic acid, monosodium salt	527-07-1	When ready for use, the end-use concentration is not to exceed 760 ppm
Hydriodic acid	10034-85-2	When ready for use, the total end-use concentration of all iodide-producing chemicals is not to exceed 25 ppm of titratable iodine
Hydrogen peroxide	7722-84-1	When ready for use, the end-use concentration is not to exceed 465 ppm
Hypochlorous acid	7790-92-3	When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Iodine	7553-56-2	When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Lactic acid	50-21-5	When ready for use, the end-use concentration is not to exceed 138 ppm
α-Lauroyl-ω-hydroxypoly (oxyethylene) with an average of 8-9 moles ethylene oxide, average molecular weight (in amu), 400	None	None
Nonanoic acid	112-05-0	When ready for use, the end-use concentration is not to exceed 90 ppm
1-Octanamine, N,N-dimethyl-	7378-99-6	When ready for use, the end-use concentration is not to exceed 113 ppm
Start Printed Page 23138
1,2-Octanedisulfonic acid	113669-58-2	When ready for use, the end-use concentration is not to exceed 102 ppm
1-Octanesulfonic acid	3944-72-7	When ready for use, the end-use concentration is not to exceed 172 ppm
1-Octanesulfonic acid, sodium salt	5324-84-5	When ready for use, the end-use concentration is not to exceed 297 ppm
1-Octanesulfonic acid, 2-sulfino-	113652-56-5	When ready for use, the end-use concentration is not to exceed 102 ppm
Octanoic acid	124-07-2	When ready for use, the end-use concentration is not to exceed 176 ppm
Oxirane, methyl-, polymer with oxirane, ether with (1,2-ethanediyldinitrilo)tetrakis [propanol] (4:1)	11111-34-5	When ready for use, the end-use concentration is not to exceed 20 ppm
Oxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chlorite	None	When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)
Peroxyacetic acid	79-21-0	When ready for use, the end-use concentration is not to exceed 315 ppm
Peroxyoctanoic acid	33734-57-5	When ready for use, the end-use concentration is not to exceed 122 ppm
Phosphonic acid, (1-hydroxyethylidene)bis-	2809-21-4	When ready for use, the end-use concentration is not to exceed 34 ppm
Phosphoric acid	7664-38-2	None
Phosphoric acid, monosodium salt	7558-80-7	When ready for use, the end-use concentration is not to exceed 350 ppm
Potassium iodide	7681-11-0	When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Propanoic acid	79-09-4	When ready for use, the end-use concentration is not to exceed 297 ppm
2-Propanol (isopropanol)	67-63-0	None
2,6-Pyridinedicarboxylic acid	499-83-2	When ready for use, the end-use concentration is not to exceed 1.2 ppm
Sodium mono-and didodecylphenoxy-benzenedisulfonate	None	When ready for use, the end-use concentration is not to exceed 1920 ppm
Sulfuric acid	7664-93-9	When ready for use, the end-use concentration is not to exceed 288 ppm
Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate)	151-21-3	When ready for use, the end-use concentration is not to exceed 350 ppm

(c) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-processing equipment and utensils.

Pesticide Chemical	CAS Reg. No.	Limits
Acetic acid	64-19-7	When ready for use, the end-use concentration is not to exceed 686 ppm
Acetic acid, chloro-, sodium salt, reaction products with 4,5-dihydro-2-undecyl-1H-imidazole-1-ethanol and sodium hydroxide	68608-66-2	When ready for use, the end-use concentration is not to exceed 42 ppm chloroacetic acid
α-Alkyl(C₁₀-C₁₄)-ω-hydroxypoly (oxyethylene) poly (oxypropylene) average molecular weight (in amu), 768 to 837	None	None
α-Alkyl(C₁₁-C₁₅)-ω-hydroxypoly (oxyethylene) with ethylene oxide content 9 to 13 moles	None	None
α-Alkyl(C₁₂-C₁₅)-ω-hydroxypoly (oxyethylene) polyoxypropylene, average molecular weight (in amu), 965	None	None
α-Alkyl(C₁₂-C₁₈)-ω-hydroxypoly (oxyethylene) poly(oxypropylene) average molecular weight (in amu), 950 to 1120	None	None
Alkyl (C₁₂-C₁₅) monoether of mixed (ethylene-propylene) polyalkylene glycol, cloud point of 70 - 77⁰ C in 1% aqueous solution, average molecular weight (in amu), 807	None	None
Start Printed Page 23139
Ammonium chloride	12125-02-9	When ready for use, the end-use concentration is not to exceed 48 ppm
Benzenesulfonamide, N-chloro-4-methyl, sodium salt	127-65-1	None
Benzenesulfonic acid, dodecyl-	27176-87-0	When ready for use, the end-use concentration is not to exceed 400 ppm
Benzenesulfonic acid, dodecyl-, sodium salt	25155-30-0	When ready for use, the end-use concentration is not to exceed 430 ppm
Benzenesulfonic acid, oxybis[dodecyl-	30260-73-2	When ready for use, the end-use concentration is not to exceed 474 ppm
[1,1'-Biphenyl]-2-ol	90-43-7	When ready for use, the end-use concentration is not to exceed 400 ppm
Boric acid, sodium salt	7775-19-1	None
Butanedioic acid, octenyl-	28805-58-5	When ready for use, the end-use concentration is not to exceed 156 ppm
Butanedioic acid, sulfo-, 1,4-dioctyl ester, sodium salt	1639-66-3	None
Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, cloudpoint of 90 - 100^o C in 0.5 aqueous solution, average molecular weight (in amu), 3300	None	None
Butoxy monoether of mixed (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400	None	None
Calcium bromide	7789-41-5	When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen
Calcium chloride	10043-52-4	When ready for use, the end-use concentration is not to exceed 17 ppm
n-Carboxylic acids (C₆-C₁₂), consisting of a mixture of not less than 56% octanoic acid and not less than 40% decanoic acid	None	When ready for use, the end-use concentration is not to exceed 39 ppm
3-Cyclohexene-1-methanol,α,α,4-trimethyl-	98-55-5	None
1-Decanaminium, N-decyl-N, N-dimethyl-, chloride	7173-51-5	When ready for use, the end-use concentration is not to exceed 200 ppm of active quaternary compound
Decanoic acid	3347-48-5	When ready for use, the end-use concentration is not to exceed 234 ppm
Ethanesulfonic acid, 2-[cyclohexyl (1-oxohexadecyl) amino]-, sodium salt	132-43-4	When ready for use, the end-use concentration is not to exceed 237 ppm
Ethanol	64-17-5	None
Ethanol, 2 butoxy-	111-76-2	None
Ethanol, 2-(2-ethoxyethoxy)-	111-90-0	None
Ethylenediaminetetraacetic acid (EDTA), disodium salt	139-33-3	When ready for use, the end-use concentration is not to exceed 1400 ppm
Ethylenediaminetetraacetic acid (EDTA), tetrasodium salt	64-02-8	None
Fatty acids, coco, potassium salts	61789-30-8	None
Fatty acids, tall-oil, sulfonated, sodium salts	68309-27-3	When ready for use, the end-use concentration is not to exceed 66 ppm
FD&C Yellow No. 5 (Tartrazine) (conforming to 21 CFR 74.705)	1934-21-0	None
D-Gluconic acid, monosodium salt	527-07-1	When ready for use, the end-use concentration is not to exceed 760 ppm
Hydriodic acid	10034-85-2	When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Hydrogen peroxide	7722-84-1	When ready for use, the end-use concentration is not to exceed 1100 ppm
Hypochlorous acid	7790-92-3	When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Hypochlorous acid, calcium salt	7778-54-3	When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Hypochlorous acid, lithium salt	13840-33-0	When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine and 30 ppm lithium
Hypochlorous acid, potassium salt	7778-66-7	When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Start Printed Page 23140
Hypochlorous acid, sodium salt	7681-52-9	When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Iodine	7553-56-2	When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Lactic acid	50-21-5	None
α-Lauroyl-ω-hydroxypoly (oxyethylene) with an average of 8-9 moles ethylene oxide, average molecular weight (in amu), 400	None	None
Magnesium oxide	1309-48-4	None
Methylene blue	61-73-4	When ready for use, the end-use concentration is not to exceed 0.4 ppm
Naphthalene sulfonic acid, sodium salt	1321-69-3	When ready for use, the end-use concentration of all naphthalene sulfonate chemicals in the solution is not to exceed 332 ppm naphthalene sulfonates
Naphthalene sulfonic acid sodium salt, and its methyl, dimethyl and trimethyl derivatives	None	When ready for use, the end-use concentration of all naphthalene sulfonate chemicals in the solution is not to exceed 332 ppm naphthalene sulfonates
Naphthalene sulfonic acid sodium salt, and its methyl, dimethyl and trimethyl derivatives alkylated at 3% by weight with C₆-C₉ linear olefins	None	When ready for use, the end-use concentration of naphthalene sulfonate chemicals in the solution is not to exceed 332 ppm naphthalene sulfonates
Neodecanoic acid	26896-20-8	When ready for use, the end-use concentration is not to exceed 174 ppm
Nonanoic acid	112-05-0	When ready for use, the end-use concentration is not to exceed 90 ppm
α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) maximum average molecular weight (in amu), 748	None	None
α-(p-Nonylphenol)-ω-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles	None	None
α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene) produced by the condensation of 1 mole p-nonylphenol with 9 to 12 moles ethylene oxide	None	None
α-(p-Nonylphenyl)-ω-hydroxypoly (oxyethylene), 9 to 13 moles ethylene oxide	None	None
Octadecanoic acid, calcium salt	1592-23-0	None
9-Octadecenoic acid (9Z)-, sulfonated	68988-76-1	When ready for use, the end-use concentration is not to exceed 312 ppm
9-Octadecenoic acid (9Z)-sulfonated, sodium salts	68443-05-0	When ready for use, the end-use concentration is not to exceed 200 ppm
1-Octanamine, N,N-dimethyl-	7378-99-6	When ready for use, the end-use concentration is not to exceed 113 ppm
1,2-Octanedisulfonic acid	113669-58-2	When ready for use, the end-use concentration is not to exceed 102 ppm
1-Octanesulfonic acid	3944-72-7	When ready for use, the end-use concentration is not to exceed 172 ppm
1-Octanesulfonic acid, sodium salt	5324-84-5	When ready for use, the end-use concentration is not to exceed 312 ppm
1-Octanesulfonic acid, 2-sulfino-	113652-56-5	When ready for use, the end-use concentration is not to exceed 102 ppm
Octanoic acid	124-07-2	When ready for use, the end-use concentration is not to exceed 234 ppm
Oxirane, methyl-, polymer with oxirane, minimum molecular weight (in amu), 1900	9003-11-6	None
Oxirane, methyl-, polymer with oxirane, block, average molecular weight (in amu), 1900	106392-12-5	None
Oxirane, methyl-, polymer with oxirane, block, minimum average molecular weight (in amu), 2000	None	None
Oxirane, methyl-, polymer with oxirane, block, 27 to 31 moles of polyoxypropylene, average molecular weight (in amu) 2000	None	None
Oxirane, methyl-, polymer with oxirane, ether with (1,2-ethanediyldinitrilo)tetrakis [propanol] (4:1)	11111-34-5	When ready for use, the end-use concentration is not to exceed 20 ppm
Oxychloro species (predominantly chlorite, chlorate and chlorine dioxide in an equilibrium mixture) generated either (i) by directly metering a concentrated chlorine dioxide solution prepared just prior to use, into potable water, or (ii) by acidification of an aqueous alkaline solution of oxychloro species (predominately chlorite and chlorate) followed by dilution with potable water	None	When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, "Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)
Start Printed Page 23141
Oxychloro species (including chlorine dioxide) generated by acidification of an aqueous solution of sodium chlorite	None	When ready for use, the end-use concentration is not to exceed 200 ppm of chlorine dioxide as determined by the method titled, "Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide)
2,4-Pentanediol, 2-methyl-	107-41-5	None
Peroxyacetic acid	79-21-0	When ready for use, the end-use concentration is not to exceed 315 ppm
Peroxyoctanoic acid	33734-57-5	When ready for use, the end-use concentration is not to exceed 122 ppm
Phenol, 4-chloro-2-(phenylmethyl)-	120-32-1	When ready for use, the end-use concentration is not to exceed 320 ppm
Phenol, 4-(1,1-dimethylpropyl)-	80-46-6	When ready for use, the end-use concentration is not to exceed 80 ppm
Phosphonic acid, (1-hydroxyethylidene)bis-	2809-21-4	When ready for use, the end-use concentration is not to exceed 34 ppm
Phosphoric acid	7664-38-2	None
Phosphoric acid, monosodium salt	7558-80-7	When ready for use, the end-use concentration is not to exceed 350 ppm
Phosphoric acid, trisodium salt	7601-54-9	When ready for use, the end-use concentration is not to exceed 5916 ppm
Poly(oxy-1,2-ethanediyl), α-[(1,1,3,3-tetramethylbutyl) phenyl]-ω-hydroxy-, produced with one mole of the phenol and 4 to 14 moles ethylene oxide	None	None
Potassium bromide	7758-02-3	When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen
Potassium iodide	7681-11-0	When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Potassium permanganate	7722-64-7	When ready for use, the end-use concentration is not to exceed 0.7 ppm
Propanoic acid	79-09-4	When ready for use, the end-use concentration is not to exceed 297 ppm
2-Propanol (isopropanol)	67-63-0	None
2,6-Pyridinedicarboxylic acid	499-83-2	When ready for use, the end-use concentration is not to exceed 1.2 ppm
Quaternary ammonium compounds, alkyl (C₁₂-C₁₈) benzyldimethyl, chlorides	8001-54-5	When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound
Quaternary ammonium compounds, n-alkyl (C₁₂-C₁₄) dimethyl ethylbenzyl ammonium chloride, average molecular weight (in amu), 377 to 384	None	When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound
Quaternary ammonium compounds, n-alkyl (C₁₂-C₁₈) dimethyl ethylbenzyl ammonium chloride average molecular weight (in amu) 384	None	When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound
Quaternary ammonium compounds, di-n-Alkyl (C₈-C₁₀) dimethyl ammonium chloride, average molecular weight (in amu), 332 to 361	None	When ready for use, the end-use concentration of this specific quaternary compound is not to exceed 240 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound
Sodium-α-alkyl(C₁₂-C₁₅)-ω-hydroxypoly (oxyethylene) sulfate with the poly(oxyethylene) content averaging one mole	None	None
Sodium bicarbonate	144-55-8	None
Sodium bromide	7647-15-6	When ready for use, the end-use concentration of all bromide-producing chemicals in the solution is not to exceed 200 ppm total available halogen
Sodium iodide	7681-82-5	When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine
Sodium mono-and didodecylphenoxy-benzenedisulfonate	None	When ready for use, the end-use concentration is not to exceed 1920 ppm
Sulfuric acid	7664-93-9	When ready for use, the end-use concentration is not to exceed 228 ppm
Start Printed Page 23142
Sulfuric acid monododecyl ester, sodium salt (sodium lauryl sulfate)	151-21-3	None
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-	2782-57-2	When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, potassium salt	2244-21-5	When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3-dichloro-, sodium salt	2893-78-9	When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3,5-trichloro-	87-90-1	When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
1,3,5-Triazine, N,N',N'`-trichloro-2,4,6-triamino-	7673-09-8	When ready for use, the end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
Xylenesulfonic acid, sodium salt	1300-72-7	When ready for use, the end-use concentration is not to exceed 62 ppm

§ 180.1001

[Removed]

13. Section 180.1001 is removed.

14. In § 180.1067, paragraph (b) is revised to read as follows:

§ 180.1067

Methyl eugenol and malathion combination; exemption from the requirement of a tolerance.

(b) This combination is to be impregnated on a carrier (cigarette filter tips (cellulose acetate); cotton strings; fiberboard squares) or mixed with a jel cleared under 40 CFR 180.920 or 180.950.

[FR Doc. 04-9578 Filed 4-27-04; 8:45 am]

BILLING CODE 6560-50-S

Visit the Official Version

Document Information

Effective Date:: 4/28/2004
Published:: 04/28/2004
Department:: Environmental Protection Agency
Entry Type:: Rule
Action:: Final rule.
Document Number:: 04-9578
Dates:: This final rule is effective on April 28, 2004.
Pages:: 23113-23142 (30 pages)
Docket Numbers:: OPP-2003-0368, FRL-7335-4
PDF File:: 04-9578.pdf
CFR: (11): 40 CFR 153.155; 40 CFR 168.65; 40 CFR 168.75; 40 CFR 180.900; 40 CFR 180.905; More ...