2013-23100. Approval and Promulgation of Air Quality Implementation Plans; Maryland; Adoption of Control Techniques Guidelines for Miscellaneous Metal and Plastic Parts Which Includes Pleasure Craft Coating Operations  

  • Start Preamble

    AGENCY:

    Environmental Protection Agency (EPA).

    ACTION:

    Final rule.

    SUMMARY:

    EPA is approving a State Implementation Plan (SIP) revision submitted by the State of Maryland. The revision consists of a new regulation pertaining to control of volatile organic compound (VOC) emissions from pleasure craft coating operations. EPA is approving the revision to reduce further VOC emissions from pleasure craft coating operations in accordance with the requirements of the Clean Air Act (CAA).

    DATES:

    This final rule is effective on October 28, 2013.

    ADDRESSES:

    EPA has established a docket for this action under Docket ID Number EPA-R03-OAR-2013-0066. All documents in the docket are listed in the www.regulations.gov Web site. Although listed in the electronic docket, some information is not publicly available, i.e., confidential business information (CBI) or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the Internet and will be publicly available only in hard copy form. Publicly available docket materials are Start Printed Page 59241available either electronically through www.regulations.gov or in hard copy for public inspection during normal business hours at the Air Protection Division, U.S. Environmental Protection Agency, Region III, 1650 Arch Street, Philadelphia, Pennsylvania 19103. Copies of the State submittal are available at the Maryland Department of the Environment, 1800 Washington Boulevard, Suite 705, Baltimore, Maryland 21230.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Gregory Becoat, (215) 814-2036, or by email at becoat.gregory@epa.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    I. Background

    On May 16, 2013 (78 FR 28773), EPA published a notice of proposed rulemaking (NPR) for the State of Maryland. The NPR proposed approval of Maryland's Regulation .27-1 under COMAR 26.11.19—Volatile Organic Compounds from Specific Processes. On January 10, 2013, Maryland submitted the formal SIP revision (#12-08) adopting the requirements as recommended by EPA's control technique guidelines (CTG) for Miscellaneous Metal Parts and Plastic Coating (MMPPC) operations and as recommended by trade associations representing the pleasure craft industry.

    II. Summary of SIP Revision

    The SIP revision adds Regulation .27-1 under COMAR 26.11.19 in order to: (1) Establish applicability for pleasure craft and fiberglass boat coating operations; (2) establish exemptions; (3) add definitions and terms to reflect pleasure craft coating operations; (4) incorporate by reference the standard test method for Specular Gloss; (5) establish that the least stringent emission limitation is applicable if more than one emission limitation applies to a specific coating; (6) establish application methods; and (7) specify VOC limit requirements for pleasure craft coating operations. EPA received no adverse comments on the NPR to approve Maryland's SIP revision. A more complete explanation of the amendments and the rationale for EPA's proposed action is explained in the technical support document and the NPR in support of this final rulemaking and will not be restated here.

    III. Final Action

    EPA is approving Maryland's SIP revision adopting a new regulation to control VOC emissions from pleasure craft coating operations.

    IV. Statutory and Executive Order Reviews

    A. General Requirements

    Under the CAA, the Administrator is required to approve a SIP submission that complies with the provisions of the CAA and applicable Federal regulations. 42 U.S.C. 7410(k); 40 CFR 52.02(a). Thus, in reviewing SIP submissions, EPA's role is to approve state choices, provided that they meet the criteria of the CAA. Accordingly, this action merely approves state law as meeting Federal requirements and does not impose additional requirements beyond those imposed by state law. For that reason, this action:

    • Is not a “significant regulatory action” subject to review by the Office of Management and Budget under Executive Order 12866 (58 FR 51735, October 4, 1993);
    • does not impose an information collection burden under the provisions of the Paperwork Reduction Act (44 U.S.C. 3501 et seq.);
    • is certified as not having a significant economic impact on a substantial number of small entities under the Regulatory Flexibility Act (5 U.S.C. 601 et seq.);
    • does not contain any unfunded mandate or significantly or uniquely affect small governments, as described in the Unfunded Mandates Reform Act of 1995 (Pub. L. 104-4);
    • does not have Federalism implications as specified in Executive Order 13132 (64 FR 43255, August 10, 1999);
    • is not an economically significant regulatory action based on health or safety risks subject to Executive Order 13045 (62 FR 19885, April 23, 1997);
    • is not a significant regulatory action subject to Executive Order 13211 (66 FR 28355, May 22, 2001);
    • is not subject to requirements of Section 12(d) of the National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272 note) because application of those requirements would be inconsistent with the CAA; and
    • does not provide EPA with the discretionary authority to address, as appropriate, disproportionate human health or environmental effects, using practicable and legally permissible methods, under Executive Order 12898 (59 FR 7629, February 16, 1994).

    In addition, this rule does not have tribal implications as specified by Executive Order 13175 (65 FR 67249, November 9, 2000), because the SIP is not approved to apply in Indian country located in the state, and EPA notes that it will not impose substantial direct costs on tribal governments or preempt tribal law.

    B. Submission to Congress and the Comptroller General

    The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the Small Business Regulatory Enforcement Fairness Act of 1996, generally provides that before a rule may take effect, the agency promulgating the rule must submit a rule report, which includes a copy of the rule, to each House of the Congress and to the Comptroller General of the United States. EPA will submit a report containing this action and other required information to the U.S. Senate, the U.S. House of Representatives, and the Comptroller General of the United States prior to publication of the rule in the Federal Register. A major rule cannot take effect until 60 days after it is published in the Federal Register. This action is not a “major rule” as defined by 5 U.S.C. 804(2).

    C. Petitions for Judicial Review

    Under section 307(b)(1) of the CAA, petitions for judicial review of this action must be filed in the United States Court of Appeals for the appropriate circuit by November 25, 2013. Filing a petition for reconsideration by the Administrator of this final rule does not affect the finality of this action for the purposes of judicial review nor does it extend the time within which a petition for judicial review may be filed, and shall not postpone the effectiveness of such rule or action. This action approving Maryland's amendments to regulations for the control of VOCs for MMPPC may not be challenged later in proceedings to enforce its requirements. (See section 307(b)(2).)

    Start List of Subjects

    List of Subjects in 40 CFR part 52

    • Environmental protection
    • Air pollution control
    • Incorporation by reference
    • Intergovernmental relations
    • Ozone
    • Reporting and recordkeeping requirements
    • Volatile organic compounds
    End List of Subjects Start Signature

    Dated: August 29, 2013.

    W.C. Early,

    Acting Regional Administrator, Region III.

    End Signature

    40 CFR part 52 is amended as follows:

    Start Part

    PART 52—APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS

    End Part Start Amendment Part

    1. The authority citation for part 52 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 42 U.S.C. 7401 et seq.

    End Authority Start Printed Page 59242

    Subpart V—Maryland

    Start Amendment Part

    2. In § 52.1070, the table in paragraph (c) is amended by adding an entry for COMAR 26.11.19.27-1, after the existing entry for COMAR 26.11.19.27. The added text reads as follows:

    End Amendment Part
    Identification of plan.
    * * * * *

    (c) * * *

    EPA-Approved Regulations, Technical Memoranda, and Statutes in the Maryland SIP

    Code of Maryland Administrative Regulations (COMAR) citationTitle/subjectState effective dateEPA-Approval dateAdditional explanation/ citation at 40 CFR 52.1100
    *         *         *         *         *         *         *
    26.11.19 Volatile Organic Compounds From Specific Processes
    *         *         *         *         *         *         *
    26.11.19.27-1Control of Volatile Organic Compounds from Pleasure Craft Coating Operations10/12/129/26/13 [Insert page number where the document begins]Regulation Added.
    *         *         *         *         *         *         *
    * * * * *
    End Supplemental Information

    [FR Doc. 2013-23100 Filed 9-25-13; 8:45 am]

    BILLING CODE 6560-50-P

Document Information

Effective Date:
10/28/2013
Published:
09/26/2013
Department:
Environmental Protection Agency
Entry Type:
Rule
Action:
Final rule.
Document Number:
2013-23100
Dates:
This final rule is effective on October 28, 2013.
Pages:
59240-59242 (3 pages)
Docket Numbers:
EPA-R03-OAR-2013-0066, FRL-9901-20-Region3
Topics:
Air pollution control, Environmental protection, Incorporation by reference, Intergovernmental relations, Ozone, Reporting and recordkeeping requirements, Volatile organic compounds
PDF File:
2013-23100.pdf
Supporting Documents:
» EPA Memo-Control Technique Guidelines for Miscellaneous Metal and Plastic Part Coatings Industry Request for Reconsideration
» Control Technique Guideline for Miscellaneous Metal and Plastic Part Coating
» Technical Support Document
» Completeness Letter
» State Submittal - Transmittal Letter and Enclosures
CFR: (1)
40 CFR 52.1070