2014-00800. Certain Steel Threaded Rod From India and Thailand; Scheduling of the Final Phase of Countervailing Duty and Antidumping Investigations.

AGENCY:

United States International Trade Commission.

ACTION:

Notice.

SUMMARY:

The Commission hereby gives notice of the scheduling of the final phase of antidumping and countervailing duty investigation Nos. 701-TA-498 and 731-TA-1213-1214 (Final) under sections 705(b) and 731(b) of the Tariff Act of 1930 (19 U.S.C. 1671d(b) and 1673d(b)) (the Act) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of imports from India and Thailand of certain steel threaded rod, provided for primarily in subheading 7318.15.50 of the Harmonized Tariff Schedule of the United States,^[1] that are alleged to be sold in the United States at less than fair value (LTFV) and subsidized by the Government of India.

For further information concerning the conduct of this phase of the investigations, hearing procedures, and rules of general application, consult the Commission's Rules of Practice and Procedure, part 201, subparts A through E (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207).

DATES:

Effective December 31, 2013.

FOR FURTHER INFORMATION CONTACT:

Nathanael Comly (202-205-3174) or Michelle Breaux (202-205-2781), Office of Investigations, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission's TDD terminal on 202-205-1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202-205-2000. General information concerning the Commission may also be obtained by accessing its internet server (http://www.usitc.gov). The public record for these investigations may be viewed on the Commission's electronic docket (EDIS) at http://edis.usitc.gov.

SUPPLEMENTARY INFORMATION:

Background.—The final phase of these investigations is being scheduled as a result of affirmative preliminary determinations by the Department of Commerce that certain benefits which constitute subsidies within the meaning of section 703 of the Act (19 U.S.C. 1671b) are being provided to manufacturers, producers, or exporters in India of certain steel threaded rod, and that such products from India and Thailand are being sold in the United States at less than fair value within the meaning of section 733 of the Act (19 U.S.C. 1673b).^[2] The investigations were requested in a petition filed on June 27, 2013, by All America Threaded Products Inc., Denver, Colorado; Bay Standard Manufacturing Inc., Brentwood, California; and Vulcan Threaded Products Inc., Pelham, Alabama.

Participation in the investigations and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of these investigations as parties must file an entry of appearance with the Secretary to the Commission, as provided in section 201.11 of the Commission's rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigations need not file an additional notice of appearance during this final phase. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigations.

Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to section 207.7(a) of the Commission's rules, the Secretary will make BPI gathered in the final phase of these investigations available to authorized applicants under the APO issued in the investigations, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the investigations. A party granted access to BPI in the preliminary phase of the investigations need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO.

Staff report.—The prehearing staff report in the final phase of these investigations will be placed in the nonpublic record on March 7, 2014, and a public version will be issued thereafter, pursuant to section 207.22 of the Commission's rules.

Hearing.—The Commission will hold a hearing in connection with the final phase of these investigations beginning at 9:30 a.m. on March 20, 2014, at the U.S. International Trade Commission Building. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before March 14, 2014. A nonparty who has testimony that may aid the Commission's deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should attend a prehearing conference to be held at 9:30 a.m. on March 18, 2014, at the U.S. International Trade Commission Building. Oral testimony and written materials to be submitted at the public hearing are governed by sections 201.6(b)(2), 201.13(f), and 207.24 of the Commission's rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing.

Written submissions.—Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of section 207.23 of the Commission's rules; the deadline for filing is March 14, 2014. Parties may also file written testimony in connection with their presentation at the hearing, as provided in section 207.24 of the Commission's rules, and posthearing briefs, which must conform with the provisions of section 207.25 of the Commission's rules. The deadline for filing posthearing briefs is March 27, 2014. In addition, any person who has not entered an appearance as a party to the investigations may submit a written statement of information pertinent to the subject of the investigations, including statements of support or opposition to the petition, on or before March 27, 2014. On April 10, 2014, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before April 14, 2014, but such final comments must not contain new factual information and must otherwise comply with section 207.30 of the Commission's rules. Finally, on May 2, 2014, parties may submit supplemental final comments addressing only Commerce's final antidumping and countervailing duty determinations regarding imports from India. These supplemental final comments may not contain new factual information and may not exceed five (5) pages in length. All written submissions must conform with the provisions of section 201.8 of the Commission's rules; any submissions that contain BPI must also conform with the requirements of sections 201.6, 207.3, and 207.7 of the Commission's rules. The Commission's Handbook on E-Filing, available on the Commission's Web site at http://edis.usitc.gov,, elaborates upon the Commission's rules with respect to electronic filing.

Additional written submissions to the Commission, including requests pursuant to section 201.12 of the Commission's rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff.

In accordance with sections 201.16(c) and 207.3 of the Commission's rules, each document filed by a party to the investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service.

Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to section 207.21 of the Commission's rules.

Issued: January 13, 2014.

By order of the Commission.

Lisa R. Barton,

Acting Secretary to the Commission.

Footnotes

1.  For purposes of these investigations, the Department of Commerce has defined the subject merchandise as: “Steel threaded rod is certain threaded rod, bar, or studs, of carbon quality steel, having a solid, circular cross section, of any diameter, in any straight length, that have been forged, turned, cold-drawn, cold-rolled, machine straightened, or otherwise cold-finished, and into which threaded grooves have been applied. In addition, the steel threaded rod, bar, or studs subject to these investigations are nonheaded and threaded along greater than 25 percent of their total length. A variety of finishes or coatings, such as plain oil finish as a temporary rust protectant, zinc coating (i.e., galvanized, whether by electroplating or hot-dipping), paint, and other similar finishes and coatings, may be applied to the merchandise.

Included in the scope of these investigations are steel threaded rod, bar, or studs, in which: (1) Iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:

• 1.80 percent of manganese, or
• 1.50 percent of silicon, or
• 1.00 percent of copper, or
• 0.50 percent of aluminum, or
• 1.25 percent of chromium, or
• 0.30 percent of cobalt, or
• 0.40 percent of lead, or
• 1.25 percent of nickel, or
• 0.30 percent of tungsten, or
• 0.012 percent of boron, or
• 0.10 percent of molybdenum, or
• 0.10 percent of niobium, or
• 0.41 percent of titanium, or
• 0.15 percent of vanadium, or
• 0.15 percent of zirconium.

Steel threaded rod is currently classifiable under subheadings 7318.15.5051, 7318.15.5056, 7318.15.5090 and 7318.15.2095 of the Harmonized Tariff Schedule of the United States (“HTSUS”). Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise is dispositive.

Excluded from the scope of these investigations are: (a) Threaded rod, bar, or studs which are threaded only on one or both ends and the threading covers 25 percent or less of the total length; and (b) threaded rod, bar, or studs made to American Society for Testing and Materials (“ASTM”) A193 Grade B7, ASTM A193 Grade B7M, ASTM A193 Grade B16, and ASTM A320 Grade L7.”

2.  In addition to making its preliminary affirmative countervailing duty determination on certain steel threaded rod from India, the Department of Commerce simultaneously announced the alignment of the final countervailing duty determination with the final determination in the companion antidumping duty investigation (India). Thus, the Department of Commerce's final countervailing duty will be issued on the same date as the final antidumping determination, which is currently scheduled to be issued on April 28, 2014. 78 FR 76815.