C1-2014-06954. Control of Air Pollution From Motor Vehicles: Tier 3 Motor Vehicle Emission and Fuel Standards

Correction

In rule document 2014-06954, appearing on pages 23414-23886, in the issue of Monday, April 28, 2014, make the following corrections:

§ 86.113-94

Fuel specifications. [Corrected]

On page 23695 make the following correction:

The first table on page 23695 is corrected as set forth below.

Property	Unit	Type 2-D	Reference procedure 1
(i) Cetane Number		40-50	ASTM D613
(ii) Cetane Index		40-50	ASTM D976
(iii) Distillation range:
(A) IBP		340-400 (171.1-204.4)
(B) 10 pct. point		400-460 (204.4-237.8)
(C) 50 pct. point	°F (°C)	470-540 (243.3-282.2)	STM D86
(D) 90 pct. point		560-630 (293.3-332.2)
(E) EP		610-690 (321.1-365.6)
(iv) Gravity	°API	32-37	ASTM D4052
(v) Total sulfur	ppm	7-15	ASTM D2622
(vi) Hydrocarbon composition: Aromatics, minimum (Remainder shall be paraffins, naphthenes, and olefins)	pct	27	ASTM D5186
(vii) Flashpoint, min	°F (°C)	130 (54.4)	ASTM D93
(viii) Viscosity	centistokes	2.0-3.2	ASTM D445
1 ASTM procedures are incorporated by reference in § 86.1.

§ 1065.845

Response factor determination. [Corrected]

On page 23813 make the following correction:

The table heading for the table titled “Table 1 of § 1065.845” is corrected to read as set forth below.

Table 1 of § 1065.845—Default Values for THC FID Response Factor Relative to Propane on a C₁-Equivalent Basis

§ 1066.845

AC17 air conditioning efficiency test procedure. [Corrected]

On page 23881 make the following correction:

The equation in the first column is corrected to read as set forth below.