2015-21054. MSHA Headquarters, Pittsburgh Safety and Health Technology Center, and Respirable Dust Processing Laboratory Address Changes  

  • Start Preamble

    AGENCY:

    Mine Safety and Health Administration, Labor.

    ACTION:

    Final rule; technical amendment.

    SUMMARY:

    The Mine Safety and Health Administration (MSHA) is amending its published regulations that include the Agency's addresses. MSHA relocated its Headquarters offices and also will discontinue renting the Post Office boxes it uses for mail delivery to the Pittsburgh Safety and Health Technology Center and Respirable Dust Processing Laboratory. In addition, MSHA is amending the incorporation by reference language in some of its regulations to include current addresses, telephone numbers, and internet addresses.

    DATES:

    Effective Date: September 2, 2015.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Sheila A. McConnell, Acting Director, Office of Standards, Regulations, and Variances, MSHA, at mcconnell.sheila.a@dol.gov (email); 202-693-9440 (voice); or 202-693-9441 (facsimile). These are not toll-free numbers.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    On June 15, 2015, MSHA moved its Headquarters offices from 1100 Wilson Boulevard, Arlington, VA 22209-3939 to 201 12th Street South, Arlington, VA 22202-5452. MSHA is amending its regulations to include MSHA's new address.

    MSHA is also amending its regulations to update the mailing address of MSHA's Office of Technical Support, Pittsburgh Safety and Health Technology Center. MSHA will discontinue renting the Post Office boxes it uses for mail delivery. The mailing address for the Pittsburgh Safety and Health Technology Center's Respirable Dust Processing Laboratory is 626 Cochrans Mill Road, Building 38, Pittsburgh, PA 15236-3611. The mailing address to submit seal design applications for approval by the Pittsburgh Safety and Health Technology Center is 626 Cochrans Mill Road, Building 151, Pittsburgh, PA 15236-3611.

    In addition, MSHA made other non-substantive changes to correct inaccurate names: §§ 48.3, 48.23, and 48.32 contain a non-substantive change to the name of the Administrator for Metal and Nonmetal Mine Safety and Health; §§ 7.505, 56.2, 57.2, and 75.301 contain a non-substantive change to the name of the Office of Standards, Regulations, and Variances; and §§ 49.3, 49.4, and 49.8 contain a non-substantive change to remove an obsolete or inapplicable name.

    MSHA is also amending previously approved incorporation by reference (IBR) language in some MSHA regulations. The amendments conform to current Office of the Federal Register (OFR) format requirements for an IBR regarding publisher addresses, telephone numbers, and internet addresses, and include contact information for the National Archives and Records Administration (NARA).

    This technical amendment is a procedural “rule” under 5 U.S.C. 551(4), and is not subject to the notice-and-comment rulemaking requirements in 5 U.S.C. 553. This action also does not constitute a “regulatory action” subject to Executive Order 12866. Accordingly, the regulations in 30 CFR parts 7, 18, 44, 46, 48, 49, 56, 57, 70, 71, 72, 74, 75, and 90 are amended to include updated information.

    Start List of Subjects

    List of Subjects

    30 CFR Part 7

    • Explosives
    • Incorporation by reference
    • Mine safety and health
    • Reporting and recordkeeping requirements
    • Research

    30 CFR Part 18

    • Mine safety and health
    • Reporting and recordkeeping requirements

    30 CFR Part 44

    • Administrative practice and procedure
    • Mine safety and health
    • Reporting and recordkeeping requirements

    30 CFR Part 46

    • Education
    • Mine safety and health
    • Reporting and recordkeeping requirements

    30 CFR Part 48

    • Education
    • Mine safety and health
    • Reporting and recordkeeping requirements

    30 CFR Part 49

    • Education
    • Mine safety and health
    • Reporting and recordkeeping requirements

    30 CFR Part 56

    • Chemicals
    • Electric power
    • Explosives
    • Fire prevention
    • Hazardous substances
    • Incorporation by reference
    • Metals
    • Mine safety and health
    • Reporting and recordkeeping requirements

    30 CFR Part 57

    • Chemicals
    • Electric power
    • Explosives
    • Fire prevention
    • Gases
    • Hazardous substances
    • Incorporation by reference
    • Metals
    • Mine safety and health
    • Radiation protection
    • Reporting and recordkeeping requirements

    30 CFR Part 70

    • Incorporation by reference
    • Mine safety and health
    • Reporting and recordkeeping requirements

    30 CFR Part 71

    • Hazardous substances
    • Incorporation by reference
    • Mine safety and health
    • Reporting and recordkeeping requirements
    • Water supply

    30 CFR Part 72

    • Coal
    • Incorporation by reference
    • Mine safety and health

    30 CFR Part 74

    • Incorporation by reference
    • Mine safety and health
    • Occupational safety and health

    30 CFR Part 75

    • Communications equipment
    • Electric power
    • Emergency medical services
    • Explosives
    • Fire prevention
    • Incorporation by reference
    • Mine safety and health
    • Reporting and recordkeeping requirements

    30 CFR Part 90

    • Black lung benefits
    • Incorporation by reference
    • Mine safety and health
    • Reporting and recordkeeping requirements
    End List of Subjects Start Signature

    Dated: August 19, 2015.

    Joseph A. Main,

    Assistant Secretary of Labor for Mine Safety and Health.

    End Signature

    For the reasons set out in the preamble, and under the authority of the Federal Mine Safety and Health Act of 1977, as amended, MSHA is amending chapter I of title 30 of the Code of Federal Regulations as follows:

    Start Part

    PART 7—TESTING BY APPLICANT OR THIRD PARTY

    End Part Start Amendment Part

    1. The authority citation for part 7 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 957.

    End Authority Start Amendment Part

    2. Section 7.505 is amended by revising paragraph (b)(6) to read as follows:

    End Amendment Part
    Structural components.
    * * * * *

    (b) * * *

    (6) A test shall be conducted to demonstrate that each structure resists puncture and tearing when tested in accordance with ASTM D2582-07 “Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting.” This publication is incorporated by reference. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. A copy may be obtained from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; 610-832-9500; http://www.astm.org. A copy may be inspected at any MSHA Coal Mine Safety and Health District Office; or at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    * * * * *
    Start Part

    PART 18—ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES

    End Part Start Amendment Part

    3. The authority citation for part 18 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 957, 961.

    End Authority Start Amendment Part

    4. Section 18.82 is amended by revising the second sentence of paragraph (a) to read as follows:

    End Amendment Part
    Permit to use experimental electric face equipment in a gassy mine or tunnel.

    (a) * * * The user shall submit a written application to the Assistant Secretary of Labor for Mine Safety and Health, 201 12th Street South, Arlington, VA 22202-5452, and send a copy to the U.S. Department of Labor, Mine Safety and Health Administration, Approval and Certification Center, 765 Technology Drive, Triadelphia, WV 26059.

    * * * * *
    Start Part

    PART 44—RULES OF PRACTICE FOR PETITIONS FOR MODIFICATION OF MANDATORY SAFETY STANDARDS

    End Part Start Amendment Part

    5. The authority citation for part 44 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 957.

    End Authority Start Amendment Part

    6. In § 44.10, revise the second sentence to read as follows:

    End Amendment Part
    Filing of petition; service.

    * * * All petitions must be in writing and must be filed with the Director, Office of Standards, Regulations, and Variances, Mine Safety and Health Administration, 201 12th Street South, Arlington, VA 22202-5452. * * *

    Start Amendment Part

    7. Section 44.21 is amended by revising the third sentence in paragraph (a) to read as follows:

    End Amendment Part
    Filing and form of documents.

    (a) * * * While the petition is before the Assistant Secretary at any stage of the proceeding, all documents should be filed with the Assistant Secretary of Labor for Mine Safety and Health, 201 12th Street South, Arlington, VA 22202-5452.

    * * * * *
    Start Part

    PART 46—TRAINING AND RETRAINING OF MINERS ENGAGED IN SHELL DREDGING OR EMPLOYED AT SAND, GRAVEL, SURFACE STONE, SURFACE CLAY, COLLOIDAL PHOSPHATE, OR SURFACE LIMESTONE MINES

    End Part Start Amendment Part

    8. The authority citation for part 46 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 811, 825.

    End Authority Start Amendment Part

    9. Section 46.2 is amended by revising paragraph (d)(1)(iii) to read as follows:

    End Amendment Part
    Definitions.
    * * * * *

    (d)(1) * * *

    (iii) A person who began employment as a miner after April 14, 1999, but before October 2, 2000, and who has Start Printed Page 52986received new miner training under § 48.25 of this chapter or under proposed requirements published April 14, 1999, which are available from the Office of Standards, Regulations, and Variances, MSHA, 201 12th Street South, Arlington, VA 22202-5452; or,

    * * * * *
    Start Amendment Part

    10. Section 46.3 is amended by revising the first sentence in paragraph (h) to read as follows:

    End Amendment Part
    Training plans.
    * * * * *

    (h) If you, miners, or miners' representatives wish to appeal a decision of the Regional Manager, you must send the appeal, in writing, to the Director for Educational Policy and Development, MSHA, 201 12th Street South, Arlington, VA 22202-5452, within 30 calendar days after notification of the Regional Manager's decision. * * *

    * * * * *
    Start Part

    PART 48—TRAINING AND RETRAINING OF MINERS

    End Part Start Amendment Part

    11. The authority citation for part 48 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 811, 825.

    End Authority Start Amendment Part

    12. Section 48.3 is amended by revising the third sentence in paragraph (i) to read as follows:

    End Amendment Part
    Training plans; time of submission; where filed; information required; time for approval; method for disapproval; commencement of training; approval of instructors.
    * * * * *

    (i) * * * A decision by the District Manager to revoke an instructor's approval may be appealed by the instructor to the Administrator for Coal Mine Safety and Health or Administrator for Metal and Nonmetal Mine Safety and Health, as appropriate, MSHA, 201 12th Street South, Arlington, VA 22202-5452. * * *

    * * * * *
    Start Amendment Part

    13. Section 48.12 is amended by revising paragraph (a) to read as follows:

    End Amendment Part
    Appeals procedures.
    * * * * *

    (a) In the event an operator, miner, or miners' representative decides to appeal a decision by a District Manager, such an appeal shall be submitted, in writing, to the Administrator for Coal Mine Safety and Health or the Administrator for Metal and Nonmetal Mine Safety and Health, as appropriate, MSHA, 201 12th Street South, Arlington, VA 22202-5452, within 30 days of notification of the District Manager's decision.

    * * * * *
    Start Amendment Part

    14. Section 48.23 is amended by revising the third sentence in paragraph (i) to read as follows:

    End Amendment Part
    Training plans; time of submission; where filed; information required; time for approval; method for disapproval; commencement of training; approval of instructors.
    * * * * *

    (i) * * * A decision by the District Manager to revoke an instructor's approval may be appealed by the instructor to the Administrator for Coal Mine Safety and Health or the Administrator for Metal and Nonmetal Mine Safety and Health, as appropriate, MSHA, 201 12th Street South, Arlington, VA 22202-5452. * * *

    * * * * *
    Start Amendment Part

    15. Section 48.32 is amended by revising paragraph (a) to read as follows:

    End Amendment Part
    Appeals procedures.

    (a) In the event an operator, miner, or miners' representative decides to appeal a decision by the District Manager, such an appeal shall be submitted, in writing, to the Administrator for Coal Mine Safety and Health or the Administrator for Metal and Nonmetal Mine Safety and Health, as appropriate, MSHA, 201 12th Street South, Arlington, VA 22202-5452, within 30 days of notification of the District Manager's decision.

    * * * * *
    Start Part

    PART 49—MINE RESCUE TEAMS

    End Part Start Amendment Part

    16. The authority citation for part 49 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 811, 825(e).

    End Authority Start Amendment Part

    17. Section 49.3 is amended by revising the second sentence of paragraph (h)(2) to read as follows:

    End Amendment Part
    Alternative mine rescue capability for small and remote mines.
    * * * * *

    (h) * * *

    (2) * * * The operator may appeal this decision in writing to the Administrator for Metal and Nonmetal Mine Safety and Health, 201 12th Street South, Arlington, VA 22202-5452.

    Start Amendment Part

    18. Section 49.4 is amended by revising the second sentence of paragraph (i)(2) to read as follows:

    End Amendment Part
    Alternative mine rescue capability for special mining conditions.
    * * * * *

    (i) * * *

    (2) * * * The operator may appeal this decision in writing to the Administrator for Metal and Nonmetal Mine Safety and Health, 201 12th Street South, Arlington, VA 22202-5452.

    Start Amendment Part

    19. Section 49.8 is amended by revising the third sentence of paragraph (e) to read as follows:

    End Amendment Part
    Training for mine rescue teams.
    * * * * *

    (e) * * * The affected instructor may appeal the decision of the District Manager by writing to the Administrator for Metal and Nonmetal Mine Safety and Health, MSHA, 201 12th Street South, Arlington, VA 22202-5452. * * *

    * * * * *
    Start Part

    PART 56—SAFETY AND HEALTH STANDARDS—SURFACE METAL AND NONMETAL MINES

    End Part Start Amendment Part

    20. The authority citation for part 56 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 811.

    End Authority Start Amendment Part

    21. In § 56.2, revise the definition for “Laminated partition” to read as follows:

    End Amendment Part
    Definitions.
    * * * * *

    Laminated partition means a partition composed of the following material and minimum nominal dimensions: 1/2-inch-thick plywood, 1/2-inch-thick gypsum wallboard, 1/8-inch-thick low carbon steel, and 1/4-inch-thick plywood, bonded together in that order (IME-22 Box). A laminated partition also includes alternative construction materials described in the Institute of Makers of Explosives (IME) Safety Library Publication No. 22, “Recommendations for the Safe Transportation of Detonators in a Vehicle with Other Explosive Materials” (May 1993), and the “Generic Loading Guide for the IME-22 Container” (October 1993). The IME is located at 1120 19th Street NW., Suite 310, Washington, DC 20036-3605; 202-429-9280; https://www.ime.org. This incorporation by reference has been approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at all Metal and Nonmetal Mine Safety and Health District Offices, or available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​Start Printed Page 52987federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    * * * * *
    Start Amendment Part

    22. Section 56.6133 is amended by revising paragraph (b) to read as follows:

    End Amendment Part
    Powder chests.
    * * * * *

    (b) Detonators shall be kept in chests separate from explosives or blasting agents, unless separated by 4 inches of hardwood or equivalent, or a laminated partition. When a laminated partition is used, operators must follow the provisions of the Institute of Makers of Explosives (IME) Safety Library Publication No. 22, “Recommendations for the Safe Transportation of Detonators in a Vehicle with Other Explosive Materials” (May 1993), and the “Generic Loading Guide for the IME-22 Container” (October 1993). The IME is located at 1120 19th Street NW., Suite 310, Washington, DC 20036-3605; 202-429-9280; https://www.ime.org. This incorporation by reference has been approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at all Metal and Nonmetal Mine Safety and Health District Offices, or available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    Start Amendment Part

    23. Section 56.6201 is amended by revising paragraphs (a)(2) and (b)(2) to read as follows:

    End Amendment Part
    Separation of transported explosive material.
    * * * * *

    (a) * * *

    (2) Separated from explosives or blasting agents by 4 inches of hardwood or equivalent, or a laminated partition. The hardwood or equivalent shall be fastened to the vehicle or conveyance. When a laminated partition is used, operators must follow the provisions of the Institute of Makers of Explosives (IME) Safety Library Publication No.22, “Recommendations for the Safe Transportation of Detonators in a Vehicle with Other Explosive Materials” (May 1993), and the “Generic Loading Guide for the IME-22 Container” (October 1993). The IME is located at 1120 19th Street NW., Suite 310, Washington, DC 20036-3605; 202-429-9280; https://www.ime.org. This incorporation by reference has been approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at all Metal and Nonmetal Mine Safety and Health District Offices, or available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    (b) * * *

    (2) Separated from explosives or blasting agents by 4 inches of hardwood or equivalent, or a laminated partition. The hardwood or equivalent shall be fastened to the vehicle or conveyance. When a laminated partition is used, operators must follow the provisions of IME Safety Library Publication No. 22, “Recommendations for the Safe Transportation of Detonators in a Vehicle with Other Explosive Materials” (May 1993), and the “Generic Loading Guide for the IME-22 Container” (October 1993). The IME is located at 1120 19th Street NW., Suite 310, Washington, DC 20036-3605; 202-429-9280; https://www.ime.org. This incorporation by reference has been approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at all Metal and Nonmetal Mine Safety and Health District Offices, or available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    Start Amendment Part

    24. Section 56.14130 is amended by revising paragraph (j) to read as follows:

    End Amendment Part
    Roll-over protective structures (ROPS) and seat belts.
    * * * * *

    (j) Publications. The incorporation by reference of these publications is approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of these publications may be examined at any Metal and Nonmetal Mine Safety and Health District Office; at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. Copies may be purchased from the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001; 724-776-4841; http://www.sae.org.

    Start Amendment Part

    25. Section 56.14131 is amended by revising paragraph (d) to read as follows:

    End Amendment Part
    Seat belts for haulage trucks.
    * * * * *

    (d) The incorporation by reference of these publications is approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of these publications may be examined at any Metal and Nonmetal Mine Safety and Health District Office; at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. Copies may be purchased from the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001; 724-776-4841; http://www.sae.org.

    Start Part

    PART 57—SAFETY AND HEALTH STANDARDS—UNDERGROUND METAL AND NONMETAL MINES

    End Part Start Amendment Part

    26. The authority citation for part 57 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 811.

    End Authority Start Amendment Part

    27. In § 57.2, revise the definition for “Laminated partition” to read as follows:

    End Amendment Part
    Definitions.
    * * * * *

    Laminated partition means a partition composed of the following material and minimum nominal dimensions: 1/2-inch-thick plywood, 1/2-inch-thick gypsum wallboard, 1/8-inch-thick low carbon steel, and 1/4-inch-thick plywood, bonded together in that order (IME-22 Box). A laminated partition also includes alternative construction materials described in the Institute of Makers of Explosives (IME) Safety Library Publication No. 22, “Recommendations for the Safe Transportation of Detonators in a Vehicle with Other Explosive Materials” Start Printed Page 52988(May 1993), and the “Generic Loading Guide for the IME-22 Container” (October 1993). The IME is located at 1120 19th Street NW., Suite 310, Washington, DC 20036-3605; 202-429-9280; https://www.ime.org. This incorporation by reference has been approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at all Metal and Nonmetal Mine Safety and Health District Offices, or available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    * * * * *
    Start Amendment Part

    28. Section 57.6133 is amended by revising paragraph (b) to read as follows:

    End Amendment Part
    Powder chests.
    * * * * *

    (b) Detonators shall be kept in chests separate from explosives or blasting agents, unless separated by 4 inches of hardwood or equivalent, or a laminated partition. When a laminated partition is used, operators must follow the provisions of the Institute of Makers of Explosives (IME) Safety Library Publication No. 22, “Recommendations for the Safe Transportation of Detonators in a Vehicle with Other Explosive Materials” (May 1993), and the “Generic Loading Guide for the IME-22 Container” (October 1993). The IME is located at 1120 19th Street NW., Suite 310, Washington, DC 20036-3605; 202-429-9280; https://www.ime.org. This incorporation by reference has been approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at all Metal and Nonmetal Mine Safety and Health District Offices, or available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    Start Amendment Part

    29. Section 57.6201 is amended by revising paragraphs (a)(2) and (b)(2) to read as follows:

    End Amendment Part
    Separation of transported explosive material.
    * * * * *

    (a) * * *

    (2) Separated from explosives or blasting agents by 4 inches of hardwood or equivalent, or a laminated partition. The hardwood or equivalent shall be fastened to the vehicle or conveyance. When a laminated partition is used, operators must follow the provisions of the Institute of Makers of Explosives (IME) Safety Library Publication No. 22, “Recommendations for the Safe Transportation of Detonators in a Vehicle with Other Explosive Materials” (May 1993), and the “Generic Loading Guide for the IME-22 Container” (October 1993). The IME is located at 1120 19th Street NW., Suite 310, Washington, DC 20036-3605; 202-429-9280; https://www.ime.org. This incorporation by reference has been approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at all Metal and Nonmetal Mine Safety and Health District Offices, or available for examination at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    (b) * * *

    (2) Separated from explosives or blasting agents by 4 inches of hardwood or equivalent, or a laminated partition. The hardwood or equivalent shall be fastened to the vehicle or conveyance. When a laminated partition is used, operators must follow the provisions of IME Safety Library Publication No. 22, “Recommendations for the Safe Transportation of Detonators in a Vehicle with Other Explosive Materials” (May 1993), and the “Generic Loading Guide for the IME-22 Container” (October 1993). The IME is located at 1120 19th Street NW., Suite 310, Washington, DC 20036-3605; 202-429-9280; https://www.ime.org. This incorporation by reference has been approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at all Metal and Nonmetal Mine Safety and Health District Offices, or available for examination at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    Start Amendment Part

    30. Section 57.14130 is amended by revising paragraph (j) to read as follows:

    End Amendment Part
    Roll-over protective structures (ROPS) and seat belts for surface equipment.
    * * * * *

    (j) Publications. The incorporation by reference of these publications is approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of these publications may be examined at any Metal and Nonmetal Mine Safety and Health District Office; at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. Copies may be purchased from the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001; 724-776-4841; http://www.sae.org.

    Start Amendment Part

    31. Section 57.14131 is amended by revising paragraph (d) to read as follows:

    End Amendment Part
    Seat belts for surface haulage trucks.
    * * * * *

    (d) The incorporation by reference of these publications is approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of these publications may be examined at any Metal and Nonmetal Mine Safety and Health District Office; at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. Copies may be purchased from the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001; 724-776-4841; http://www.sae.org.

    Start Amendment Part

    32. Section 57.22005 is amended by revising the first sentence in paragraph (b) to read as follows:

    End Amendment Part
    Start Printed Page 52989
    Notice and appeal of placement or change in placement.
    * * * * *

    (b) The mine operator or representative of miners may obtain review of the Administrator's determination by filing a request for a hearing with the Assistant Secretary of Labor for Mine Safety and Health, Mine Safety and Health Administration, 201 12th Street South, Arlington, VA 22202-5452 within 30 days of the Administrator's determination. * * *

    * * * * *
    Start Part

    PART 70—MANDATORY HEALTH STANDARDS—UNDERGROUND COAL MINES

    End Part Start Amendment Part

    33. The authority citation for part 70 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 811, 813(h), 957.

    End Authority Start Amendment Part

    34. Section 70.204 is amended by revising paragraph (e) to read as follows:

    End Amendment Part
    Approved sampling devices; maintenance and calibration.
    * * * * *

    (e) You must proceed in accordance with “Calibration and Maintenance Procedures for Coal Mine Respirable Dust Samplers,” MSHA Informational Report IR 1240 (1996), referenced in paragraph (a) of this section. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from the MSHA Web site at http://www.msha.gov and you may inspect or obtain a copy at MSHA, Coal Mine Safety and Health, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9500; and at each MSHA Coal Mine Safety and Health District Office, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    Start Amendment Part

    35. Section 70.210 is amended by revising paragraph (a) to read as follows:

    End Amendment Part
    Respirable dust samples; transmission by operator.

    (a) If using a CMDPSU, the operator shall transmit within 24 hours after the end of the sampling shift all samples collected to fulfill the requirements of this part, including control filters, in containers provided by the manufacturer of the filter cassette to: Respirable Dust Processing Laboratory, Pittsburgh Safety and Health Technology Center, 626 Cochrans Mill Road, Building 38, Pittsburgh, PA 15236-3611, or to any other address designated by the District Manager.

    * * * * *
    Start Amendment Part

    36. Section 70.1900 is amended by revising paragraph (c) to read as follows:

    End Amendment Part
    Exhaust Gas Monitoring.
    * * * * *

    (c) Except as provided in § 75.325(j) of this chapter, when sampling results indicate a concentration of CO and/or NO2 exceeding an action level of 50 percent of the threshold limit values (TLV®) adopted by the American Conference of Governmental Industrial Hygienists, the mine operator shall immediately take appropriate corrective action to reduce the concentrations of CO and/or NO2 to below the applicable action level. The publication, “Threshold Limit Values for Substance in Workroom Air” (1972) is incorporated by reference and may be inspected at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; at any MSHA Coal Mine Safety and Health District Office; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. In addition, copies of the document may be purchased from the American Conference of Governmental Industrial Hygienists, 1330 Kemper Meadow Drive, Attn: Customer Service, Cincinnati, OH 45240; 513-742-2020; http://www.acgih.org.

    * * * * *
    Start Part

    PART 71—MANDATORY HEALTH STANDARDS—SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES

    End Part Start Amendment Part

    37. The authority citation for part 71 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 811, 813(h), 957.

    End Authority Start Amendment Part

    38. Section 71.204 is amended by revising paragraph (e) to read as follows:

    End Amendment Part
    Approved sampling devices; maintenance and calibration.
    * * * * *

    (e) You must proceed in accordance with “Calibration and Maintenance Procedures for Coal Mine Respirable Dust Samplers,” MSHA Informational Report IR 1240 (1996), referenced in paragraph (a) of this section. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from the MSHA Web site at http://www.msha.gov and you may inspect or obtain a copy at MSHA, Coal Mine Safety and Health, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9500; and at each MSHA Coal Mine Safety and Health District Office, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    Start Amendment Part

    39. Section 71.207 is amended by revising paragraph (a) to read as follows:

    End Amendment Part
    Respirable dust samples; transmission by operator.

    (a) If using a CMDPSU, the operator shall transmit within 24 hours after the end of the sampling shift all samples collected to fulfill the requirements of this part, including control filters, in containers provided by the manufacturer of the filter cassette to: Respirable Dust Processing Laboratory, Pittsburgh Safety and Health Technology Center, 626 Cochrans Mill Road, Building 38, Pittsburgh, PA 15236-3611, or to any other address designated by the District Manager.

    * * * * *
    Start Amendment Part

    40. Section 71.402 is amended by revising paragraph (b) to read as follows:

    End Amendment Part
    Minimum requirements for bathing facilities, change rooms, and sanitary flush toilet facilities.
    * * * * *

    (b) Bathing facilities, change rooms, and sanitary flush toilet facilities shall be constructed and equipped so as to comply with applicable State and local building codes. However, where no State or local building codes apply to these facilities, or where no State or local building codes exist, the facilities shall be constructed and equipped so as to meet the minimum construction requirements in the National Building Code (1967 edition) and the plumbing requirements in the National Plumbing Code (ASA A40.8-1955), which documents are hereby incorporated by reference and made a part hereof. These documents are available for examination at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at every MSHA Coal Mine Safety and Health District Office. Copies of the National Plumbing Code (ASA A40.8-1955) may be purchased from the American Start Printed Page 52990National Standards Institute, Inc., 25 W. 43rd Street, 4th Floor, New York, NY 10036; http://www.ansi.org.

    * * * * *
    Start Amendment Part

    41. Section 71.700 is amended by revising paragraph (a) to read as follows:

    End Amendment Part
    Inhalation hazards; threshold limit values for gases, dust, fumes, mists, and vapors.

    (a) No operator of an underground coal mine and no operator of a surface coal mine may permit any person working at a surface installation or surface worksite to be exposed to airborne contaminants (other than respirable coal mine dust, respirable dust containing quartz, and asbestos dust) in excess of, on the basis of a time-weighted average, the threshold limit values adopted by the American Conference of Governmental Industrial Hygienists in “Threshold Limit Values of Airborne Contaminants” (1972), which is hereby incorporated by reference and made a part hereof. Excursions above the listed threshold limit values shall not be of greater magnitude than is characterized as permissible by the conference. This paragraph does not apply to airborne contaminants given a “C” designation by the conference in the document. This document is available for examination at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at every MSHA Coal Mine Safety and Health District Office. Copies of the document may be purchased from the American Conference of Governmental Industrial Hygienists, 1330 Kemper Meadow Drive, Attn: Customer Service, Cincinnati, OH 45240; 513-742-2020; http://www.acgih.org.

    * * * * *
    Start Part

    PART 72—HEALTH STANDARDS FOR COAL MINES

    End Part Start Amendment Part

    42. The authority citation for part 72 continues to read as follows:

    End Amendment Part Start Authority

    Authority 30 U.S.C. 811, 813(h), 957.

    End Authority Start Amendment Part

    43. Revise § 72.710 to read as follows:

    End Amendment Part
    Selection, fit, use, and maintenance of approved respirators.

    In order to ensure the maximum amount of respiratory protection, approved respirators shall be selected, fitted, used, and maintained in accordance with the provisions of the American National Standards Institute's “Practices for Respiratory Protection ANSI Z88.2-1969,” which is hereby incorporated by reference. This publication may be obtained from the American National Standards Institute, Inc., 25 W. 43rd Street, 4th Floor, New York, NY 10036; http://www.ansi.org,, and may be inspected at any MSHA Coal Mine Safety and Health District Office, or at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

    Start Part

    PART 74—COAL MINE DUST SAMPLING DEVICES

    End Part Start Amendment Part

    44. The authority citation for part 74 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 957.

    End Authority Start Amendment Part

    45. Section 74.7 is amended by revising paragraphs (f)(1)(ii), (f)(2)(ii), and (g)(2) to read as follows:

    End Amendment Part
    Design and construction requirements.
    * * * * *

    (f) * * *

    (1) * * *

    (ii) Persons may inspect a copy at MSHA, Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452, 202-693-9440, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    (2) * * *

    (ii) Persons may inspect a copy at MSHA, Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452, 202-693-9440, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    (g) * * *

    (2) Persons may inspect a copy at MSHA, Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    * * * * *
    Start Amendment Part

    46. Section 74.8 is amended by revising paragraph (f)(2) to read as follows:

    End Amendment Part
    Measurement, accuracy, and reliability requirements.
    * * * * *

    (f) * * *

    (2) Persons may inspect a copy at MSHA, Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    Start Amendment Part

    47. Section 74.9 is amended by revising paragraph (a)(3) to read as follows:

    End Amendment Part
    Quality assurance.

    (a) * * *

    (3) Persons may inspect a copy at MSHA, Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    * * * * *
    Start Part

    PART 75—MANDATORY SAFETY STANDARDS—UNDERGROUND COAL MINES

    End Part Start Amendment Part

    48. The authority citation for part 75 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 811, 813(h), 957.

    End Authority Start Amendment Part

    49. In § 75.301, the definitions of “Noncombustible structure or area” and “Noncombustible material” are revised to read as follows:

    End Amendment Part
    Definitions.
    * * * * *

    Noncombustible structure or area. Describes a structure or area that will continue to provide protection against flame spread for at least 1 hour when subjected to a fire test incorporating an ASTM E119-88 time/temperature heat input, or equivalent. The publication ASTM E119-88 “Standard Test Start Printed Page 52991Methods for Fire Tests of Building Construction and Materials” is incorporated by reference and may be inspected at any MSHA Coal Mine Safety and Health District Office, or at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. In addition, copies of the document can be purchased from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; 610-832-9500; http://www.astm.org. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

    Noncombustible material. Describes a material that, when used to construct a ventilation control, results in a control that will continue to serve its intended function for 1 hour when subjected to a fire test incorporating an ASTM E119-88 time/temperature heat input, or equivalent. The publication ASTM E119-88 “Standard Test Methods for Fire Tests of Building Construction and Materials” is incorporated by reference and may be inspected at any Coal Mine Safety and Health District Office, or at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. In addition, copies of the document can be purchased from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; 610-832-9500; http://www.astm.org. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

    * * * * *
    Start Amendment Part

    50. Revise § 75.322 to read as follows:

    End Amendment Part
    Harmful quantities of noxious gases.

    Concentrations of noxious or poisonous gases, other than carbon dioxide, shall not exceed the threshold limit values (TLV) as specified and applied by the American Conference of Governmental Industrial Hygienists in “Threshold Limit Values for Substance in Workroom Air” (1972). Detectors or laboratory analysis of mine air samples shall be used to determine the concentrations of harmful, noxious, or poisonous gases. This incorporation by reference has been approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies are available from MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at every MSHA Coal Mine Safety and Health District Office. The material is available for examination at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    Start Amendment Part

    51. Section 75.333 is amended by revising paragraphs (d)(1), (e)(1)(i), (e)(3), and (f) to read as follows:

    End Amendment Part
    Ventilation controls.
    * * * * *

    (d) * * *

    (1) Made of noncombustible material or coated on all accessible surfaces with flame-retardant materials having a flame-spread index of 25 or less, as tested under ASTM E162-87, “Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.” This publication is incorporated by reference and may be inspected at any MSHA Coal Mine Safety and Health District Office, or at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. In addition, copies of the document can be purchased from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; 610-832-9500; http://www.astm.org. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

    * * * * *

    (e)(1)(i) Except as provided in paragraphs (e)(2), (3), and (4) of this section, all overcasts, undercasts, shaft partitions, permanent stoppings, and regulators, installed after June 10, 1996, shall be constructed in a traditionally accepted method and of materials that have been demonstrated to perform adequately or in a method and of materials that have been tested and shown to have a minimum strength equal to or greater than the traditionally accepted in-mine controls. Tests may be performed under ASTM E72-80, “Standard Methods of Conducting Strength Tests of Panels for Building Construction” (Section 12-Transverse Load-Specimen Vertical, load, only), or the operator may conduct comparative in-mine tests. In-mine tests shall be designed to demonstrate the comparative strength of the proposed construction and a traditionally accepted in-mine control. The publication ASTM E72-80, “Standard Methods of Conducting Strength Tests of Panels for Building Construction,” is incorporated by reference and may be inspected at any MSHA Coal Mine Safety and Health District Office, or at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. In addition, copies of the document can be purchased from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; 610-832-9500; http://www.astm.org. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

    * * * * *

    (3) When timbers are used to create permanent stoppings in heaving or caving areas, the stoppings shall be coated on all accessible surfaces with a flame-retardant material having a flame-spread index of 25 or less, as tested under ASTM E162-87, “Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.” This publication is incorporated by reference and may be inspected at any MSHA Coal Mine Safety and Health District Office, or at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at the National Archives and Records Start Printed Page 52992Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. In addition, copies of the document can be purchased from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; 610-832-9500; http://www.astm.org. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

    * * * * *

    (f) When sealants are applied to ventilation controls, the sealant shall have a flame-spread index of 25 or less under ASTM E162-87, “Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.” This publication is incorporated by reference and may be inspected at any MSHA Coal Mine Safety and Health District Office, or at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. In addition, copies of the document can be purchased from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; 610-832-9500; http://www.astm.org. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

    * * * * *
    Start Amendment Part

    52. Section 75.335 is amended by revising the introductory text to paragraph (b) to read as follows:

    End Amendment Part
    Seal strengths, design applications, and installation.
    * * * * *

    (b) Seal design applications. Seal design applications from seal manufacturers or mine operators shall be in accordance with paragraph (b)(1) or (2) of this section and submitted for approval to MSHA's Office of Technical Support, Pittsburgh Safety and Health Technology Center, 626 Cochrans Mill Road, Building 151, Pittsburgh, PA 15236-3611.

    * * * * *
    Start Amendment Part

    53. Section 75.523-1 is amended by revising the first sentence in paragraph (c) to read as follows:

    End Amendment Part
    Deenergization of self-propelled electric face equipment installation requirements.
    * * * * *

    (c) An operator may apply to the Director of Technical Support, Mine Safety and Health Administration, Department of Labor, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; for approval of the installation of devices to be used in lieu of devices that will quickly deenergize the tramming motors of self-propelled electric face equipment in the event of an emergency. * * *

    Start Amendment Part

    54. Section 75.818 is amended by revising paragraph (b)(4) to read as follows:

    End Amendment Part
    Use of insulated cable handling equipment.
    * * * * *

    (b) * * *

    (4) Be electrically tested every 6 months in accordance with publication ASTM F496-97. ASTM F496-97 (Standard Specification for In-Service Care of Insulating Gloves and Sleeves, 1997) is incorporated by reference and may be inspected at any MSHA Coal Mine Safety and Health District Office, or at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; and at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. In addition, copies of the document can be purchased from the American Society for Testing and Materials, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959; 610-832-9500; http://www.astm.org. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

    Start Amendment Part

    55. Section 75.833 is amended by revising paragraph (c)(1) to read as follows:

    End Amendment Part
    Handling high-voltage trailing cables.
    * * * * *

    (c) * * *

    (1) The rubber gloves must be designed and maintained to have a voltage rating of at least Class 1 (7,500 volts) and tested every 30 days in accordance with publication ASTM F496-02a, “Standard Specification for In-Service Care of Insulating Gloves and Sleeves” (2002). The Director of the Federal Register approved this incorporation by reference in accordance with 5 U.S.C. 522(a) and 1 CFR part 51. ASTM F496-02a may be obtained from the American Society for Testing and Materials, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959, call 610-832-9500 or go to http://www.astm.org. ASTM F496-02a is available for inspection at any MSHA Coal Mine Safety and Health District Office, at the MSHA Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    * * * * *
    Start Amendment Part

    56. Section 75.1710-1 is amended by revising the first sentence in paragraph (f) to read as follows:

    End Amendment Part
    Canopies or cabs; self-propelled diesel-powered and electric face equipment; installation requirements.
    * * * * *

    (f) An operator may apply to the Director of Technical Support, Mine Safety and Health Administration, Department of Labor, 201 12th Street South, Arlington, VA 22202-5452, for approval of the installation of devices to be used in lieu of substantially constructed canopies or cabs on self-propelled diesel-powered and electric face equipment. * * *

    Start Amendment Part

    57. In § 75.1900, the definition of “Noncombustible material” is revised to read as follows:

    End Amendment Part
    Definitions.
    * * * * *

    Noncombustible material. A material that will continue to serve its intended function for 1 hour when subjected to a fire test incorporating an ASTM E119-88 time/temperature heat input, or equivalent. The publication ASTM E119-88 “Standard Test Methods for Fire Tests of Building Construction and Materials” is incorporated by reference and may be inspected at any MSHA Coal Mine Safety and Health District Office; at MSHA's Office of Standards, Regulations, and Variances, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9440; or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, Start Printed Page 52993call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. In addition, copies of the document may be purchased from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA, 19428-2959; 610-832-9500; http://www.astm.org.

    * * * * *
    Start Part

    PART 90—MANDATORY HEALTH STANDARDS—COAL MINERS WHO HAVE EVIDENCE OF PNEUMOCONIOSIS

    End Part Start Amendment Part

    58. The authority citation for part 90 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 30 U.S.C. 811, 813(h), 957.

    End Authority Start Amendment Part

    59. Section 90.3 is amended by revising paragraph (d) and the first sentence in paragraph (e) to read as follows:

    End Amendment Part
    Part 90 option; notice of eligibility; exercise of option.
    * * * * *

    (d) The option to work in a low dust area of the mine may be exercised for the first time by any miner employed at a coal mine who was eligible for the option under the old section 203(b) program (http://www.msha.gov/​REGSTECHAMEND.htm), or is eligible for the option under this part by sending a written request to the Chief, Division of Health, Coal Mine Safety and Health, MSHA, 201 12th Street South, Arlington, VA 22202-5452.

    (e) The option to work in a low dust area of the mine may be re-exercised by any miner employed at a coal mine who exercised the option under the old section 203(b) program (http://www.msha.gov/​REGSTECHAMEND.htm) or exercised the option under this part by sending a written request to the Chief, Division of Health, Coal Mine Safety and Health, MSHA, 201 12th Street South, Arlington, VA 22202-5452. * * *

    * * * * *
    Start Amendment Part

    61. Section 90.204 is amended by revising paragraph (e) to read as follows:

    End Amendment Part
    Approved sampling devices; maintenance and calibration.
    * * * * *

    (e) You must proceed in accordance with “Calibration and Maintenance Procedures for Coal Mine Respirable Dust Samplers,” MSHA Informational Report IR 1240 (1996), referenced in paragraph (a) of this section. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from the MSHA Web site at http://www.msha.gov and you may inspect or obtain a copy at MSHA, Coal Mine Safety and Health, 201 12th Street South, Arlington, VA 22202-5452; 202-693-9500; and at each MSHA Coal Mine Safety and Health District Office, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/​federal_​register/​code_​of_​federal_​regulations/​ibr_​locations.html.

    Start Amendment Part

    62. Section 90.208 is amended by revising paragraph (a) to read as follows:

    End Amendment Part
    Respirable dust samples; transmission by operator.

    (a) If using a CMDPSU, the operator shall transmit within 24 hours after the end of the sampling shift all samples collected to fulfill the requirements of this part, including control filters, in containers provided by the manufacturer of the filter cassette to: Respirable Dust Processing Laboratory, Pittsburgh Safety and Health Technology Center, 626 Cochrans Mill Road, Building 38, Pittsburgh, PA 15236-3611, or to any other address designated by the District Manager.

    * * * * *
    End Supplemental Information

    [FR Doc. 2015-21054 Filed 9-1-15; 8:45 am]

    BILLING CODE 4510-43-P

Document Information

Effective Date:
9/2/2015
Published:
09/02/2015
Department:
Mine Safety and Health Administration
Entry Type:
Rule
Action:
Final rule; technical amendment.
Document Number:
2015-21054
Pages:
52984-52993 (10 pages)
Topics:
Administrative practice and procedure, Black lung benefits, Chemicals, Coal, Communications equipment, Education, Electric power, Emergency medical services, Explosives, Fire prevention, Gases, Hazardous substances, Incorporation by reference, Metals, Mine safety and health, Occupational safety and health, Radiation protection, Reporting and recordkeeping requirements, Research, Water supply
PDF File:
2015-21054.pdf
CFR: (47)
30 CFR 7.505
30 CFR 18.82
30 CFR 44.10
30 CFR 44.21
30 CFR 46.2
More ...