2024-09456. Aluminum Lithographic Printing Plates From Japan: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Postponement of Final Determination, and Extension of Provisional Measures

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The U.S. Department of Commerce (Commerce) preliminarily determines that aluminum lithographic printing plates (printing plates) from Japan are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is July 1, 2022, through June 30, 2023. Interested parties are invited to comment on this preliminary determination.

DATES:

Applicable May 1, 2024.

FOR FURTHER INFORMATION CONTACT:

Caroline Carroll, AD/CVD Operations, Office IX, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: [phone].

SUPPLEMENTARY INFORMATION:

Background

This preliminary determination is made in accordance with section 733(b) of the Tariff Act of 1930, as amended (the Act). Commerce initiated this investigation on October 18, 2023.^[1] On February 14, 2024, Commerce postponed the preliminary determination of this investigation, and the revised deadline is now April 25, 2024.^[2]

For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum.^[3] A list of topics addressed in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at https://access.trade.gov/​public/​FRNoticesListLayout.aspx.

Scope of the Investigation

The products covered by this investigation are printing plates from Japan. For a complete description of the scope of this investigation, see Appendix I.

Scope Comments

In accordance with the preamble to Commerce's regulations,^[4] the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage ( i.e., scope).^[5] No interested party commented on the scope of the investigation as it appeared in the Initiation Notice. Commerce is not preliminarily modifying the scope language as it appeared in the Initiation Notice. See the scope in Appendix I to this notice.

Preliminary Collapsing Determination

Based on record evidence in this investigation, Commerce preliminarily finds that Fujifilm Corporation (Fujifilm Corp.) and Fujifilm Shizuoka Co., Ltd. (FFSH) are affiliated companies, pursuant to sections 771(33)(E) and (F) of the Act. Furthermore, pursuant to 19 CFR 351.401(f)(1)-(2), we find that Fujifilm Corp. and FFSH should be collapsed and treated as a single entity (collectively, Fujifilm). For additional information, see the Affiliation and Collapsing Memorandum.^[6]

Methodology

Commerce is conducting this investigation in accordance with section 731 of the Act. Commerce has calculated export prices in accordance with section 772(a) of the Act. Normal value (NV) is calculated in accordance with section 773 of the Act. For a full description of the methodology underlying Commerce's preliminary determination, see the Preliminary Decision Memorandum.

All-Others Rate

Section 733(d)(1)(ii) of the Act provides that in the preliminary determination, Commerce shall determine an estimated all-others rate for all exporters and producers not individually examined. Pursuant to section 735(c)(5)(A) of the Act, this rate shall be an amount equal to the weighted average of the estimated weighted-average dumping margins established for exporters and producers individually investigated, excluding any zero and de minimis margins, and any margins determined entirely under section 776 of the Act.

In this investigation, Commerce preliminarily assigned a rate based entirely on facts available to Miraclon Corporation Ltd. Therefore, the only rate that is not zero, de minimis, or based entirely on facts otherwise available is the rate calculated for Fujifilm. Consequently, the rate calculated for Fujifilm is also assigned as the rate for all other producers and exporters.

Preliminary Determination

Commerce preliminarily determines that the following estimated weighted-average dumping margins exist:

Exporter/producer	Estimated weighted- average dumping margin (percent)
Fujifilm Corporation; Fujifilm Shizuoka Co., Ltd	87.81
Miraclon Corporation Ltd	* 157.16
All Others	87.81
* Rate based on facts available with adverse inferences.

Suspension of Liquidation

In accordance with section 733(d)(2) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of entries of subject merchandise, as described in Appendix I, entered, or withdrawn from warehouse, for consumption on or after the date of publication of this notice in the Federal Register . Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), Commerce will instruct CBP to require a cash deposit equal to the estimated weighted-average dumping margin or the estimated all-others rate, as follows: (1) the cash deposit rate for the respondents listed above will be equal to the company-specific estimated weighted-average dumping margins determined in this preliminary determination; (2) if the exporter is not a respondent identified above, but the producer is, then the cash deposit rate will be equal to the company-specific estimated weighted-average dumping margin established for that producer of the subject merchandise ; and (3) the cash deposit rate for all other producers and exporters will be equal to the all-others estimated weighted-average dumping margin. These suspension of liquidation instructions will remain in effect until further notice.

Disclosure

Commerce intends to disclose to interested parties the calculations performed in connection with this preliminary determination within five days of its public announcement or, if there is no public announcement, within five days of the date of publication of this notice in accordance with 19 CFR 351.224(b).

Verification

As provided in section 782(i)(1) of the Act, Commerce intends to verify the information relied upon in making its final determination.

Public Comment

Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the last verification report is issued in this investigation. Rebuttal briefs, limited to issues raised in case briefs, may be submitted no later than five days after the deadline date for case briefs.^[7] Interested parties who submit case or rebuttal briefs in this investigation must submit: (1) a statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.^[8]

As provided under 19 CFR 351.309(c)(2) and (d)(2), in prior proceedings we have encouraged interested parties to provide an executive summary of their brief that should be limited to five pages total, including footnotes. In this investigation, we instead request that interested parties provide at the beginning of their briefs a public, executive summary for each issue raised in their briefs.^[9] Further, we request that interested parties limit their executive summary of each issue to no more than 450 words, not including citations. We intend to use the executive summaries as the basis of the comment summaries included in the issues and decision memorandum that will accompany the final determination in this investigation. We request that interested parties include footnotes for relevant citations in the executive summary of each issue. Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f).^[10]

Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, within 30 days after the date of publication of this notice. Requests should contain the (1) party's name, address, and telephone number; (2) the number of participants and whether any participant is a foreign national; and (3) a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at a time and date to be determined.

Postponement of Final Determination and Extension of Provisional Measures

Section 735(a)(2) of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination if, in the event of an affirmative preliminary determination, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise, or in the event of a negative preliminary determination, a request for such postponement is made by the petitioner. Pursuant to 19 CFR 351.210(e)(2), Commerce requires that requests by respondents for postponement of the final determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration.

On March 28, 2024, pursuant to 19 CFR 351.210(e), Fujifilm requested that Commerce postpone the final determination and extend provisional measures to a period not to exceed six months.^[11] In accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii), because: (1) the preliminary determination is affirmative; (2) the requesting exporter account for a significant proportion of exports of the subject merchandise; and (3) no compelling reasons for denial exist, Commerce is postponing the final determination and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, Commerce will make its final determination no later than 135 days after the date of publication of this preliminary determination.

International Trade Commission Notification

In accordance with section 733(f) of the Act, Commerce will notify the International Trade Commission (ITC) of its preliminary determination of sales at LTFV. If the final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after the final determination whether imports of the subject merchandise are materially injuring, or threaten material injury to, the U.S. industry.

Notification to Interested Parties

This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act, and 19 CFR 351.205(c).

Dated: April 25, 2024

Ryan Majerus,

Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

The merchandise covered by this investigation is aluminum lithographic printing plates. Aluminum lithographic printing plates consist of a flat substrate containing at least 90 percent aluminum. The aluminum-containing substrate is generally treated using a mechanical, electrochemical, or chemical graining process, which is followed by one or more anodizing treatments that form a hydrophilic layer on the aluminum-containing substrate. An image-recording, oleophilic layer that is sensitive to light, including but not limited to ultra-violet, visible, or infrared, is dispersed in a polymeric binder material that is applied on top of the hydrophilic layer, generally on one side of the aluminum lithographic printing plate. The oleophilic light-sensitive layer is capable of capturing an image that is transferred onto the plate by either light or heat. The image applied to an aluminum lithographic printing plate facilitates the production of newspapers, magazines, books, yearbooks, coupons, packaging, and other printed materials through an offset printing process, where an aluminum lithographic printing plate facilitates the transfer of an image onto the printed media. Aluminum lithographic printing plates within the scope of this investigation include all aluminum lithographic printing plates, irrespective of the dimensions or thickness of the underlying aluminum substrate, whether the plate requires processing after an image is applied to the plate, whether the plate is ready to be mounted to a press and used in printing operations immediately after an image is applied to the plate, or whether the plate has been exposed to light or heat to create an image on the plate or remains unexposed and is free of any image.

Subject merchandise also includes aluminum lithographic printing plates produced from an aluminum sheet coil that has been coated with a light-sensitive image-recording layer in a subject country and that is subsequently unwound and cut to the final dimensions to produce a finished plate in a third country (including the United States), or exposed to light or heat to create an image on the plate in a third country (including in a foreign trade zone within the United States).

Excluded from the scope of this investigation are lithographic printing plates manufactured using a substrate produced from a material other than aluminum, such as rubber or plastic.

Aluminum lithographic printing plates are currently classifiable under Harmonized Tariff of the United States (HTSUS) subheadings 3701.30.0000 and 3701.99.6060. Further, merchandise that falls within the scope of this investigation may also be entered into the United States under HTSUS subheadings 3701.99.3000 and 8442.50.1000. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive.

Appendix II

List of Topics Discussed in the Preliminary Decision Memorandum

I. Summary

II. Background

III. Period of Investigation

IV. Application of Facts Available and Use of Adverse Inference

V. Discussion of the Methodology

VI. Currency Conversion

VII. Recommendation

Footnotes

1.   See Aluminum Lithographic Printing Plates From the People's Republic of China and Japan: Initiation of Less-Than-Fair-Value Investigations,88 FR 73316 (October 25, 2023) ( Initiation Notice).

2.   See Aluminum Lithographic Printing Plates from the People's Republic of China and Japan: Postponement of Preliminary Determinations in the Less-Than-Fair-Value Investigations,89 FR 11248 (February 14, 2024).

3.   See Memorandum, “Decision Memorandum for the Preliminary Affirmative Determination in the Less-Than-Fair-Value Investigation of Aluminum Lithographic Printing Plates from Japan,” dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).

4.   See Antidumping Duties; Countervailing Duties, Final Rule,62 FR 27296, 27323 (May 19, 1997).

5.   See Initiation Notice, 88 FR at 73317.

6.   See Memorandum, “Preliminary Affiliation and Collapsing Memorandum” dated concurrently with this memorandum (Affiliation and Collapsing Memorandum).

7.   See19 CFR 351.309; see also19 CFR 351.303 (for general filing requirements).

8.   See19 CFR 351.309(c)(2) and (d)(2).

9.  We use the term “issue” here to describe an argument that Commerce would normally address in a comment of the Issues and Decision Memorandum.

10.   See Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings,88 FR 67069, 67077 (September 29, 2023).

11.   See Fujifilm's Letter, “Fujifilm's Request to Postpone Final Determination,” dated March 28, 2024.