2024-27450. Various Fragrance Components in Pesticide Formulations; Tolerance Exemption

Table 1 to Paragraph ( a )

Pesticide chemical	CAS Reg. No.	Limits
*         *         *         *         *         *         *
Acetoin	513-86-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
4-acetyl-6-t-butyl-1,1-dimethylindan	13171-00-1	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Allyl cinnamate	1866-31-5	When ready for use, the end-use concentration is not to exceed 33 ppm.
Allyl heptanoate	142-19-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
Allyl hexanoate	123-68-2	When ready for use, the end-use concentration is not to exceed 33 ppm.
Allyl propionate	2408-20-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
1,3-Benzodioxole-5-carboxaldehyde	120-57-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Bicyclo[2.2.1]heptan-2-one, 1,7,7-trimethyl-, (1R, 4R)-	464-49-3	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
α-Butylcinnamaldehyde	7492-44-6	When ready for use, the end-use concentration is not to exceed 33 ppm.
2-sec-Butylcyclohexanone	14765-30-1	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Cajeput oil (Melaleuca leucadendron L.)	8008-98-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Camphor	21368-68-3	When ready for use, the end-use concentration is not to exceed 33 ppm.
( print page 92827)
*         *         *         *         *         *         *
Cardamom (Elettaria cardamomum (L.) Maton)	85940-32-5	When ready for use, the end-use concentration is not to exceed 33 ppm.
Cardamom seed oil (Elettaria cardamomum (L.) Maton)	8000-66-6	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Cyclopentaneacetai acid, 3-oxo-2-pentyl-, methyl ester	24851-98-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
Cyclopropanemethanol, 1-methyl-2-[(1,2,2-trimethylbicyclo[3.1.0]hex-3-yl)methyl]-	198404-98-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Diisobutyl ketone	108-83-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
3,4-Dimethyl-1,2-cyclopentadione	13494-06-9	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2,5-Dimethylpyrazine	123-32-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
2,6-Dimethylpyrazine	108-50-9	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
6,10-Dimethylundeca-5,9-dien-2-one	689-67-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Ethyl amyl ketone	106-68-3	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Ethyl maltol	4940-11-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2-Ethyl-3-methylpyrazine	15707-23-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Ethylvanillin	121-32-4	When ready for use, the end-use concentration is not to exceed 33 ppm.
Eucalyptus oil	8000-48-4	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Fenchone	4695-62-9	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Heptanal, 2-(phenlymethylene)-	122-40-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
3-Heptanone	106-35-4	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2,3-Hexanedione	3848-24-6	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
1-Hexanol, 2-ethyl-	104-76-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
α-Hexylcinnamaldehyde	101-86-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
( print page 92828)
*         *         *         *         *         *         *
4-Hydroxy-2,5-dimethyl-3(2H)-furanone	3658-77-3	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2-Isobutyl-3-methoxypyrazine	24683-00-9	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
α-Isobutylphenethyl alcohol	7779-78-4	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Isojasmone	11050-62-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
d,l-Isomenthone	491-07-6	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2-Isopropyl-4-methylthiazole	15679-13-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Linalool oxide	60047-17-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
(E)-Linalool oxide	34995-77-2	When ready for use, the end-use concentration is not to exceed 33 ppm.
(Z)-Linalool oxide	5989-33-3	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Maltyl isobutyrate	65416-14-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
p-Mentha-8-thiol-3-one	38462-22-5	When ready for use, the end-use concentration is not to exceed 33 ppm.
p-Menthan-3-one	10458-14-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
p-Menthane, 1,8-epoxy-	470-82-6	When ready for use, the end-use concentration is not to exceed 33 ppm.
1-p-Menthene-8-thiol	71159-90-5	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2-Methoxy-3-(1-methylpropyl)pyrazine	24168-70-5	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Methyl n-amyl ketone	110-43-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
3-Methyl-1-cyclopentadecanone	541-91-3	When ready for use, the end-use concentration is not to exceed 33 ppm.
Methylcyclopentenolone	80-71-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
6-Methyl-3,5-heptadien-2-one	1604-28-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
6-Methyl-5-hepten-2-one	110-93-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
3-Methyl-2-(n-pentanyl)-2-cyclopenten-1-one	1128-08-1	When ready for use, the end-use concentration is not to exceed 33 ppm.
3-Methyl-2-(2E)-2-penten-1-yl-2-cyclopenten-1-one	6261-18-3	When ready for use, the end-use concentration is not to exceed 33 ppm.
( print page 92829)
3-Methyl-2-(2-pentenyl)-2-cyclopenten-1-one, (Z)-	488-10-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Methyl phenethyl ether	3558-60-9	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
5-Methyl-2-phenyl-2-hexenal	21834-92-4	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2-Methyl-4-propyl-1,3-oxathiane	67715-80-4	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
5-Methyl-2-thiophenecarboxyaldehyde	13679-70-4	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
3-Methyl-5-(2,2,3-trimethyl-3-cyclopenten-1-yl)pent-4-en-2-ol	67801-20-1	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2-Methylpyrazine	109-08-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Nerol oxide	1786-08-9	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2-Nonanone	821-55-6	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Nootkatone	4674-50-4	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2-Octanone	111-13-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
1-Octen-3-ol	3391-86-4	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Oils, rosemary	8000-25-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
Oils, sage	8022-56-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Origanum oil, Spanish	8007-11-2	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
7-Oxabicyclo(2.2.1.)heptane, 1-methyl-4-(1-methylethyl)-	470-67-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Phenylethyl isoamyl ether	56011-02-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Piperonyl acetate	326-61-4	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
4H-Pyran-4-one, 3-hydroxy-2-methyl-	118-71-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
( print page 92830)
*         *         *         *         *         *         *
Rue oil (Ruta graveolens L.)	8014-29-7	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
Tetrahydro-4-methyl-2-(2-methylpropen-1-yl)pyran	16409-43-1	When ready for use, the end-use concentration is not to exceed 33 ppm.
Tetrahydro-6-(3-pentenyl)-2H-pyran-2-one	32764-98-0	When ready for use, the end-use concentration is not to exceed 33 ppm.
Theaspirane	36431-72-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2-Tridecanone	593-08-8	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *
2-Undecanone	112-12-9	When ready for use, the end-use concentration is not to exceed 33 ppm.
*         *         *         *         *         *         *