E8-1003. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 2, 2007 through November 30, 2007, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the specific PMN number or TME number, must be received on or before February 22, 2008.

ADDRESSES:

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2007-1193, by one of the following methods:

• Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA-HQ-OPPT-2007-1193. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone]. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-2007-1193. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov website is an “anonymous access” system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. For additional information about EPA's public docket, visit the EPA Docket Center homepage at http://www.epa.gov/​epahome/​dockets.htm.

Docket: All documents in the docket are listed in the docket index available in regulations.gov. To access the electronic docket, go to http://www.regulations.gov, select “Advanced Search,” then “Docket Search.” Insert the docket ID number where indicated and select the “Submit” button. Follow the instructions on the regulations.gov website to view the docket index or access available documents. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding Federal holidays. The telephone number of the EPA/DC Public Reading Room is [phone], and the telephone number for the OPPT Docket is [phone]. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What Should I Consider as I Prepare My Comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When submitting comments, remember to:

i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.

vi. Provide specific examples to illustrate your concerns and suggest alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 2, 2007 through November 30, 2007, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 111 Premanufacture Notices Received From: 10/01/07 to 11/30/07

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-08-0001	10/01/07	12/29/07	CBI	(G) Esterified polyamic acid polymer for coatings, open, non-dispersive use	(G) Esterified polyamic acid polymer
P-08-0002	10/01/07	12/29/07	Genencor, (Danisco, USA)	(S) Textile chemical formulation (TCF) of denim bleaching products; laundry denim bleaching and/or modification of the cast of denim	(S) Benzonitrile, 4-hydroxy-3,5-dimethoxy- (syringonitrile)
P-08-0003	10/01/07	12/29/07	CBI	(S) Intermediate for paint binder	(G) Methacrylate monomer
P-08-0004	10/01/07	12/29/07	CBI	(S) Topcoat for leather; topcoat for plastics and epdn rubber	(G) Aliphatic polycarbonate diol polyurethane
P-08-0005	10/01/07	12/29/07	CBI	(S) Topcoat for leather; topcoat for plastics and epon rubber	(G) Aliphatic polycarbonate diol polyurethane
P-08-0006	10/03/07	12/31/07	CBI	(G) Resin for coatings	(G) Acrylic polyester microgel polymer
P-08-0007	10/03/07	12/31/07	CBI	(G) Resin for coatings	(G) Polyester polymer
P-08-0008	10/03/07	12/31/07	CBI	(G) Resin for coatings	(G) Acrylic polymer
P-08-0009	10/03/07	12/31/07	CBI	(G) Resin for coatings	(G) Acrylic polymer
P-08-0010	10/03/07	12/31/07	CBI	(G) Resin for coatings	(G) Acrylic polymer
P-08-0011	10/04/07	01/01/08	CBI	(S) Paint binder (whichever of the two PMN substance is produced will be used as a paint binder)	(G) Octyl acrylates
P-08-0012	10/04/07	01/01/08	CBI	(S) Paint binder (whichever of the two PMN substance is produced will be used as a paint binder)	(G) Octyl acrylates
P-08-0013	10/03/07	12/31/07	Incorez Corporation	(S) Curing agent for epoxy based coatings	(G) Emulsified polyamine hardener
P-08-0014	10/03/07	12/31/07	CBI	(G) Resin for coatings	(G) Acrylic polymer
P-08-0015	10/03/07	12/31/07	CBI	(G) Resin for coatings	(G) Acrylic polymer
P-08-0016	10/09/07	01/06/08	CBI	(S) Chemical Intermediate	(G) Hydroxymercapto substituted benzene
P-08-0017	10/09/07	01/06/08	The Dow Chemical Company	(G) Component of electrical laminates	(G) Phosphorated phenolic novolac
P-08-0018	10/10/07	01/07/08	CBI	(G) Oilfield applications	(G) Modified olefins
P-08-0019	10/10/07	01/07/08	CBI	(G) Component of manufactured consumer article - contained use	(G) Benzene, 1,4-bis(aralkoxy)-
P-08-0020	10/10/07	01/07/08	CBI	(G) Chemical intermediate in the manufacture of other industrial chemicals, and additive in formulated coating products	(S) Propanol, 1 (or 2)-(methyl-2-phenoxyethoxy)-
P-08-0021	10/11/07	01/08/08	Robertet, Inc.	(S) As an odoriferous component of fragrance compounds	(S) Alcoholic beverages, rum, ext.
P-08-0022	10/11/07	01/08/08	Mitsubishi Chemical Performance Polymers, Inc.	(S) Molding material for agriculture; molding material for food package; material for fiber, monofilament; molding material for construction; material for sheet, film	(G) Alkanedioic acid, polymer with butanedioic acid, 1,4-butanediol and 2-hydroxypropanoic acid
P-08-0023	10/11/07	01/08/08	Mitsubishi Chemical Performance Polymers, Inc.	(S) Molding material for agriculture; molding material for food package; material for fiber, monofilament; molding material for construction; material for sheet, film	(G) Alkanedioic acid, polymer with 1,4-butanediol and 2-hydroxypropanoic acid
P-08-0024	10/10/07	01/07/08	CBI	(G) Crosslinking agent to be ultimately used in the manufacture of automotive and aircraft coating materials	(S) 1,3-dioxolane-4-butanol,2-ethenyl-
P-08-0025	10/12/07	01/09/08	CBI	(G) Papermaking chemical	(S) Formamide, N-ethenyl-, homopolymer, hydrolyzed, N-(3-carboxy-1-oxopropyl) N-[2-hydroxy-3-(trimethylammonio)propyl] derivs., chlorides
P-08-0026	10/15/07	01/12/08	CBI	(S) Melt processing e.g. injection moulding to produce finished articles	(S) Methanone, 1,1′-(1,4-phenylene)bis[1-(4-fluorophenyl)-, polymer with bis(4-hydroxyphenyl)methanone
P-08-0027	10/15/07	01/12/08	CBI	(G) Silicone intermediate	(G) Dimethyl siloxane polyglycol
P-08-0028	10/15/07	01/12/08	CBI	(S) Textile treating agent	(G) Dimethyl siloxane polyethylene glycol
P-08-0029	10/17/07	01/14/08	CBI	(G) Destructive use	(G) Hindered phenolic ester
P-08-0030	10/18/07	01/15/08	CBI	(G) A. Synthetic lubricant base fluid (major); B. Reactive intermediate (minor)	(G) 1,1 Geminal disubstituted ethylene
P-08-0031	10/18/07	01/15/08	CBI	(G) A. Synthetic lubricant base fluid (major); B. Reactive intermediate (minor)	(G) 1,1 Geminal disubstituted ethylene
P-08-0032	10/18/07	01/15/08	CBI	(G) A. Synthetic lubricant base fluid (major); B. Reactive intermediate (minor)	(G) 1,1 Geminal disubstituted ethylene
P-08-0033	10/19/07	01/16/08	CBI	(G) Chemical intermediate	(G) Chloro fluoro alkane
P-08-0034	10/22/07	01/19/08	Hydbrid Plastics, Inc.	(S) Epoxy resin for high temperature aerospace composites	(S) Oxirane, 2-[[3-(trimethoxysilyl)propoxy]methyl]-, hydrolyzed
P-08-0035	10/19/07	01/16/08	CBI	(G) Fabric treatment agent	(S) 6 H-dibenz[c,e][1,2]oxaphosphorium,6-(phenylmethyl)-,6-oxide
P-08-0036	10/23/07	01/20/08	Fujifilm Hunt Chemicals U.S.A., Inc.	(S) Intermediated for production of PMN substance P-06-444	(S) Benzenecarboximidamide, n-hydroxy-4-nitro-
P-08-0037	10/24/07	01/21/08	Forbo Adhesives, LLC	(G) Hot melt polyurethane adhesive	(G) Isocyanate functional polyester polyether urethane polymer
P-08-0038	10/25/07	01/22/08	CBI	(S) Aliphatic acrylate polymer used in the manufacture of Ultraviolet curable inks and coatings	(G) Tertiary amine acrylate
P-08-0039	10/25/07	01/22/08	CBI	(G) Hardening agent	(G) Mixed amino diaryl sulfone isomers
P-08-0040	10/25/07	01/22/08	CBI	(G) Sealant	(G) Polyurethane hybrid
P-08-0041	10/25/07	01/22/08	CBI	(G) Paint	(G) Neodecanoic acid, oxiranyl ester modified alkyl acrylate,polymer with alkyl acrylates, styrene and hydroxyalkyl acrylates, peroxide-initiated
P-08-0042	10/23/07	01/20/08	CBI	(G) Foam additive	(G) Treated silica
P-08-0043	10/26/07	01/23/08	CBI	(G) Jacketing of wires and data-cables	(G) Fluoropolymer
P-08-0044	10/26/07	01/23/08	CBI	(G) Non-dispersive use	(G) Animated epoxy resin
P-08-0045	10/29/07	01/26/08	Rahn USA Corp.	(S) Ultra violet / electron beam reactive formulations	(G) Aliphatic urethane acrylate oligomer
P-08-0046	10/29/07	01/26/08	CBI	(G) Coating additive	(G) Mixed metal oxide complex
P-08-0047	10/29/07	01/26/08	CBI	(G) Raw material	(G) Metal oxide complex
P-08-0048	10/31/07	01/28/08	CBI	(G) Colourant dispersant	(G) Acrylic polymer
P-08-0049	10/30/07	01/27/08	CBI	(G) Ink additive	(G) 2-propenoic acid, 2-methyl-, polymer with alkyl 2-propenoate, ethenylbenzene and 2-propenoic acid, metal salt, peroxycompound-initiated
P-08-0050	10/31/07	01/28/08	CBI	(G) Metalworking fluid component	(G) Amide polymer
P-08-0051	10/31/07	01/28/08	3M Company	(G) Adhesive	(G) Substituted acrylate polymer
P-08-0052	11/01/07	01/29/08	BAE Systems , ordnance systems Inc.	(G) For use as a high explosive in explosives formulatons for DOD	(S) Nitrotriazolone 3-nitro-1,2,4-triazol-5-one
P-08-0053	11/01/07	01/29/08	Reichhold, Inc.	(S) Topcoats for industrial equipment	(G) Urethane modified vegetable oil, epoxidized polymer
P-08-0054	11/01/07	01/29/08	CBI	(G) Semiconductor coating	(G) Poly (arylene ether)
P-08-0055	11/01/07	01/29/08	CBI	(G) Open non-dispersive (coatings)	(G) Aqueous hydroxyl-functional polyester polyacrylate dispersion
P-08-0056	11/01/07	01/29/08	CBI	(G) Functional fluid	(G) Polyalphaolefins; paos
P-08-0057	11/01/07	01/29/08	CBI	(G) Functional fluid	(G) Polyalphaolefins; paos
P-08-0058	11/01/07	01/29/08	CBI	(G) Functional fluid	(G) Polyalphaolefins; paos
P-08-0059	11/01/07	01/29/08	CBI	(G) Functional fluid	(G) Polyalphaolefins; paos
P-08-0060	11/01/07	01/29/08	CBI	(G) Functional fluid	(G) Polyalphaolefins; paos
P-08-0061	10/31/07	01/28/08	CBI	(G) Reactive emulsifier for emulsion polymerization	(G) Alcohol, reaction products with alkylene oxide, alkenyl glycidyl ether sulfate
P-08-0062	11/01/07	01/29/08	Reichhold, Inc.	(S) Topcoats for industrial equipment	(G) Urethane modified vegetable oil, epoxidized polymer
P-08-0063	11/01/07	01/29/08	CBI	(S) Extrusion of tubing systems; injection molding of special applications	(G) Polyamide based on alkanedioic acid, alkyl lactam and polyoxyalkylene
P-08-0064	11/02/07	01/30/08	CBI	(G) An open non-dispersive use	(G) Rosin modified phenolic resin
P-08-0065	11/01/07	01/29/08	CBI	(G) Rheology additive	(G) Urethane-urea
P-08-0066	11/01/07	01/29/08	CBI	(G) Rheology additive	(G) Urethane-urea
P-08-0067	11/05/07	02/02/08	CIBA Corporation	(S) Pigment for printing ink used in time-temperature indicator labeling	(G) 1′,1′′′-[1,4-phenylenebis(methylene)]bis[1′,3′-dihydro-8-methoxy-3′3,′-dimethyl-6-nitro- aromatic substituted indole
P-08-0068	11/05/07	02/02/08	Firmenich Inc.	(S) Aroma for use in fragrance mixtures, which in turn are used in perfumes, soaps, cleansers, etc.	(S) Definition: Extractives and their physically modified derivatives. Schinus Terebinthifolius.
P-08-0068	11/05/07	02/02/08	Firmenich Inc.	(S) Aroma for use in fragrance mixtures, which in turn are used in perfumes, soaps, cleansers, etc.	(S) Oils, schinus terebinthifolius
P-08-0069	11/05/07	02/02/08	CBI	(G) Fuel additive-destructive use	(G) Alkenyl succinimide
P-08-0070	11/05/07	02/02/08	CBI	(G) Coating	(G) Fluorosilicone
P-08-0071	11/05/07	02/02/08	CBI	(G) Coating	(G) Fluorosilicone
P-08-0072	11/05/07	02/02/08	CBI	(G) Thickener for inorganic materials	(G) Poly (methacryloyloxyalkyl trialkylammonium salt)
P-08-0073	11/06/07	02/03/08	CBI	(S) Crosslinker for coatings and adhesives	(G) Aliphatic polyisocyanate, C16-alcohol and polyalkylene glycol-blocked
P-08-0074	11/06/07	02/03/08	CBI	(S) Crosslinker for coatings and adhesives	(G) Aliphatic polyisocyanate, C16-alcohol and polyalkylene glycol-blocked
P-08-0075	11/06/07	02/03/08	CBI	(G) Paint	(G) Polyisocyanate resin
P-08-0076	11/07/07	02/04/08	CBI	(G) For application to cellulosic substrates	(G) Disubstituted phenylazo naphthalenstrisulfonic acid, salt
P-08-0077	11/13/07	02/10/08	Orient Corporation of America	(S) Charge stabilizer for electro-photo copy toner	(S) Ferrate(1-), bis[4-[2-[5-(1,1-dimethylethyl)-2-(hydroxy-.kappa.o)phenyl]diazenyl]-.kappa.n1]-3-(hydroxy-.kappa.o]-n-phenyl-2-naphthalenecarboxamidato(2-)], hydrogen (1:1)
P-08-0078	11/13/07	02/10/08	CBI	(S) PMN material in fragrance products	(G) Plant oil
P-08-0079	11/13/07	02/10/08	Reichhold, Inc.	(S) Resin for paints/coatings	(G) Amine salt of polyester polyol, hydroxy substituted carboxylic acid, cycloaliphatic glycol, aliphatic diisocyanate and hydroxy substituted alkylamines.
P-08-0080	11/13/07	02/10/08	Reichhold, Inc.	(S) Resin for paints/coatings	(G) Amine salt of polyester polyol, cycloaliphatic glycol, hydroxy substituted carboxylic acid, alkyldiamine and aliphatic diisocyanate
P-08-0081	11/13/07	02/10/08	Lubrizol Metalworking Additives	(S) Metalworking fluid component	(S) Soybean oil, maleated, ester with polyethylene glycol mono-C12-16-alkyl ethers
P-08-0082	11/13/07	02/10/08	Lubrizol Metalworking Additives	(S) Metalworking fluid component	(S) Soybean oil, maleated, ester with polyethylene glycol mono-C12-16-alkyl ethers, potassium salts
P-08-0083	11/13/07	02/10/08	Lubrizol Metalworking Additives	(S) Metalworking fluid component	(S) Soybean oil, maleated, ester with polyethylene glycol mono-C12-16-alkyl ethers, compound with ethanolamine
P-08-0084	11/13/07	02/10/08	Lubrizol Metalworking Additives	(S) Metalworking fluid component	(S) Soybean oil, maleated, ester with polyethylene glycol mono-C12-16-alkyl ethers, compound with triethanolamine
P-08-0085	11/13/07	02/10/08	Lubrizol Metalworking Additives	(S) Metalworking fluid component	(S) Soybean oil, maleated, ester with polyethylene glycol mono-C12-16-alkyl ethers, compound with branched 3-(tridecyloxy)-1-propanamine
P-08-0086	11/13/07	02/10/08	Lubrizol Metalworking Additives	(S) Metalworking fluid component	(S) Amines, C12-14-tert-alkyl, compounds with maleated soybean oil ester with polyethylene glycol mono-C12-16-alkyl ethers
P-08-0087	11/14/07	02/11/08	CBI	(G) Lubricant additive open, non-dispersive use	(G) Alkyl acid reaction products with metal salt of alkyl alcohol
P-08-0088	11/14/07	02/11/08	CBI	(G) Emulsifier	(G) Perfluorodioxyalkonicacid salt
P-08-0089	11/15/07	02/12/08	CBI	(G) Component of paint	(G) Fatty acid oils polymer with aromatic acid, acrylates, styrene, polyol and conjugated anhydrides
P-08-0090	11/01/07	01/29/08	CBI	(G) Modifier for epoxy formulations	(G) Epoxy liquid polysulfide
P-08-0091	11/13/07	02/10/08	Sasol North America Inc.	(S) Polymer performance additive	(S) Oxirane, 2-[[3-(trimethoxysilyl)propoxy]methyl]-, reaction products with boehmite (al(oh)o)
P-08-0092	11/13/07	02/10/08	Sasol North America Inc.	(S) Polymer performance additive	(S) Oxirane, 2-[[3-(trimethoxysilyl)propoxy]methyl]-, reaction products with boehmite (al(oh)o)
P-08-0093	11/16/07	02/13/08	CBI	(G) Binder in foundry applications	(G) Aromatic polyester polyol
P-08-0094	11/19/07	02/16/08	CBI	(G) Lubricant Additive	(G) Alkyl methacrylate esters telomers with 1-dodecanethiol, tert-bu 2-ethylhexaneperoxoate-initiated
P-08-0095	11/19/07	02/16/08	Cytec Industries Inc.	(S) Process chemical for sulfur removal from diesel fuel	(S) Phosphonium, methyltris (2-methylpropyl)-, salt with 4-methylbenzenesulfonic acid (1:1)
P-08-0096	11/26/07	02/23/08	CBI	(G) Binder	(G) Polymer of styrene-butadiene, polybutadiene, ethoxylated nonyl pheneol acrylate and 1,6-hexanediol diacrylate
P-08-0097	11/26/07	02/23/08	CBI	(G) Binder	(G) Polymer of styrene-butadiene, polybutanediene, ethoxylated nonyl pheneol acrylate and 1,6-hexanediol diacrylate
P-08-0098	11/26/07	02/23/08	CBI	(G) Binder	(G) Polymer of styrene-butadiene, polybutanediene, ethoxylated nonyl pheneol acrylate and 1,6-hexanediol diacrylate
P-08-0099	11/21/07	02/18/08	AOC LLC	(S) Polyester component for pultrusion of fiberglass reinforced plastic parts	(S) 1,4-benzenedicarboxylic acid, polymer with 1,2-ethanediol, 2,5-furandione, 2,2′-oxybis [ethanol] and 1,2-propanediol
P-08-0100	11/26/07	02/23/08	CBI	(G) Metalworking fluid	(G) Polypropylene glycol succinate
P-08-0101	11/26/07	02/23/08	Cytec Industries Inc.	(G) Coating resin additive	(S) Phosphinic acid, p,p-diphenyl-
P-08-0102	11/26/07	02/23/08	CBI	(G) Industrial liquid coatings	(G) Caprolactam-blocked aliphatic isocyanate polymer
P-08-0103	11/26/07	02/23/08	CBI	(G) Intermediate	(G) Dialkylmonoheterocycledione, homopolymer, ester with 1,2,3-propanetriol
P-08-0104	11/28/07	02/25/08	CBI	(G) Open, non-dispersive use (additive to coating layer)	(G) Gallium, phthalocyanine complex
P-08-0105	11/28/07	02/25/08	CBI	(G) Open, non-dispersive use (additive to coating layer)	(G) Azo compound
P-08-0106	11/28/07	02/25/08	CBI	(S) Binder for coatings for wood	(S) 2-propenoic acid, 2-methyl-, polymer with butyl 2-methyl-2-propenoate, butyl 2-propenoate, n-(1,1-dimethyl-3-oxobutyl)-2-propenamide, ethenylbenzene and methyl 2-methyl-2-propenoate
P-08-0107	11/28/07	02/25/08	CBI	(G) Rubber additive	(G) Alkoxy silane
P-08-0108	11/28/07	02/25/08	CBI	(G) Marker for liquid petroleum fuels	(G) Alkylphthalein ester
P-08-0109	11/29/07	02/26/08	CBI	(G) Polyester substrate auxiliary	(G) Disubstituted methoxyacetanilide
P-08-0110	11/29/07	02/26/08	CBI	(G) Raw material	(G) Mixed metal halide

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

II. 1 Test Marketing Exemption Notices Received From: 10/01/07 to 11/30/07

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
T-08-0001	11/19/07	01/02/08	Cytec industries Inc.	(S) Process chemical for sulfur removal from diesel fuel	(S) Phosphonium, methyltris (2-methylpropyl)-, salt with 4-methylbenzenesulfonic acid (1:1)

In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 41 Notices of Commencement From: 10/01/07 to 11/30/07

Case No.	Received Date	Commencement Notice End Date	Chemical
P-02-0748	11/05/07	10/10/07	(S) Heptacyclo[11.11.1.13,11.15,21.17,19.19,17.115,23]dodecasiloxane, dodecaphenyl-
P-02-0750	11/05/07	10/10/07	(S) Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxane, octamethyl-
P-02-0751	11/05/07	10/10/07	(S) Pentacyclo[9.5.1.13,9.15,15.17,13]octasiloxane, octaphenyl-
P-02-0778	11/07/07	10/10/07	(G) Dialkyl dithiocarbamate ester
P-02-0860	11/14/07	10/16/07	(G) Silicoaluminophosphate with template
P-05-0079	11/06/07	10/12/07	(G) Potassium salt of substituted arylazo butanamide
P-05-0138	11/29/07	11/20/07	(G) Multifunctional acrylate oligomer resin
P-05-0420	11/21/07	11/01/07	(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino)tris-, compound with 1-amino-2-propanol
P-05-0423	11/21/07	11/01/07	(S) Hexanoic acid, 6,6′,6′′-(1,3,5-triazine-2,4,6-triyltriimino)tris-, compound with 2-(2-aminoethoxy) ethanol
P-06-0489	11/29/07	11/16/07	(G) Fluoroalkyl methacrylate copolymer
P-06-0546	11/27/07	11/19/07	(G) Substituted carbomonocycle, polymer with isocyanate substituted alkyl carbomonocycle, substituted alkenoates, substituted heteromonocycle, alkanedioic acid, alkane diol, reaction products with substituted alkylamine, compounds with substituted alkanol
P-06-0563	11/29/07	11/21/07	(G) Fluoroalkyl methacrylate copolymer
P-06-0820	11/20/07	11/12/07	(G) Trisubstituted triazine
P-07-0048	11/23/07	08/21/07	(G) Salt of amine with aliphatic acid
P-07-0049	11/23/07	10/30/07	(G) Aliphatic polyamide
P-07-0132	11/23/07	11/05/07	(G) Polyurethane prepolymer; polyurethane hot melt adhesive
P-07-0156	11/21/07	10/10/07	(G) Aminomercapto siloxane
P-07-0216	11/13/07	11/08/07	(G) Substituted phenyl amino alkyl sulfonyl reaction product with substituted naphthalenesulfonic acid amino compound
P-07-0250	11/14/07	10/25/07	(G) Fatty acid modified polyester resin
P-07-0300	11/02/07	10/29/07	(G) Acrylic polymer on the basis of isobutyl methacrylate
P-07-0318	11/15/07	10/16/07	(G) Organic lithium compound
P-07-0352	11/14/07	10/29/07	(G) Modified polymer of substituted acrylate and alkyl methacrylates
P-07-0361	11/06/07	10/23/07	(G) Linseed oil, ester with pentaerythritol, polymer with hydrazine, 3-hydroxy-2-(hydroxymethyl)2-methylpropanoic acid, 5-isocyanato-1-(isocyanatomethyl)-alkylcyclohexane, 1,1′-methylenebis[4.isocyanatocyclohexane] and polypropylene glycol, compounds with triethylamine
P-07-0392	11/05/07	10/08/07	(G) Modified epoxy resin
P-07-0402	11/21/07	11/05/07	(G) Alkylphenoxy naphthalic acid amide, n-alkylphenyl-
P-07-0408	11/05/07	10/16/07	(G) Epoxy phenolic resin
P-07-0439	11/21/07	10/25/07	(G) Polycarboxylate, modified sodium salt
P-07-0448	10/29/07	10/16/07	(G) Secondary amine adduct
P-07-0495	11/09/07	10/19/07	(G) Amino substituted benzoic acid
P-07-0498	11/26/07	11/06/07	(S) 2-propenoic acid, 2-methyl-, butyl ester, polymer with 2-ethylhexyl 2-propenoate, 2-methylpropyl 2-methyl-2-propenoate and 1,2-propanediol mono(2-methyl-2-propenoate), tert-bu 3,5,5-trimethylhexaneperoxoate-initiated
P-07-0519	11/01/07	10/05/07	(G) Aminobenzene
P-07-0525	11/05/07	10/21/07	(G) Fatty acids, hydrogenated, reaction products with tetraethylenepentamine, aliphatic carboxylate
P-07-0529	10/31/07	10/18/07	(G) 2-propenoic acid, 2-methyl-, telomer with 1-alkylthiol, alkyl 2-propenoate and alkyl 2-methyl-2-propenoate, ammonium salt
P-07-0539	11/20/07	11/15/07	(G) Epoxy acrylic resin
P-07-0560	10/29/07	10/19/07	(G) Acrylate modified acrylonitrile, butadiene, styrene polymer
P-07-0561	11/06/07	10/23/07	(G) Metal salt of styrene - acrylic copolymer
P-07-0569	11/26/07	10/29/07	(S) Siloxanes and silicones, di-me, me [(2-methyl-1-oxo-2-propen-1-yl)oxy]methyl, [(methoxymethyl[[(2-methyl-1-oxo-2-propen-1-yl)oxy]methyl)silyl]oxy]-terminated
P-07-0630	11/30/07	11/27/07	(G) Polyester polyether urethane block copolymer
P-99-0303	11/30/07	11/27/07	(G) N-butyl, 2-ethylhexyl acrylate copolymer

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: January 14, 2008.

Chandler Sirmons,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.