[Federal Register Volume 64, Number 17 (Wednesday, January 27, 1999)]
[Proposed Rules]
[Pages 4063-4065]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 99-1683]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF THE TREASURY
United States Mint
31 CFR Part 100.11, 100.12
RIN 1525-ZA00
Exchange of Coin
AGENCY: Department of the Treasury, United States Mint.
ACTION: Proposed Rule; Request for Comments.
-----------------------------------------------------------------------
SUMMARY: In furtherance of the U.S. Mint's efforts to improve the
environment, reduce energy consumption and enhance workplace safety and
efficiency, the Mint wishes to discontinue melting and instead employ
mechanical means as a means of destroying mutilated coins. These
mechanical means cannot be used to process fused or mixed coins, which
represent a very small percentage of the coins redeemed annually by the
Mint. Accordingly, the proposed amendment would also allow the Mint to
discontinue accepting fused or mixed coins for redemption, and require
that all bent or partial coins submitted for redemption be separated by
denomination in order to be acceptable.
DATES: Submit comments on or before March 29, 1999.
ADDRESSES: Address all comments concerning this proposed rule to Gwen
H. Mattleman, United States Mint, 633 Third Street NW , Washington DC
20220. See Supplementary Information for electronic access and filing
information.
FOR FURTHER INFORMATION CONTACT: (Legal) Kenneth Gubin, Chief Counsel
(202) 874-5953; (Technical) Andrew Cosgarea, Associate Director, Head,
Circulating Coinage Business Unit (202) 874-6100
SUPPLEMENTARY INFORMATION:
Background
Part 100, Subpart C of Treasury Regulations 31 CFR, promulgated
under 31 U.S.C. 5120, provides among other things for the exchange of
bent, partial, fused and mixed coins. Bent, partial and mixed coins
(i.e., coins of several alloy categories presented together) which are
submitted and accepted for redemption are currently separated by alloy,
melted and cast into ingots or bars by the United States Mint. These
bars are furnished to the Mint's suppliers and used to fabricate
coinage strip in lieu of virgin copper and nickel. Fused coins are also
melted and cast into bars, but since this material has been
contaminated with base elements such as lead and arsenic it is
unsuitable for using in fabricating coinage strip and is instead sold
as scrap through the General Services Administration. The Mint has
identified and is actively pursuing initiatives to improve the
environment, reduce energy consumption and enhance efficiency and
workplace safety. Melting coins submitted for redemption by the Mint's
current heat induction procedures is not energy efficient and adds to
the Mint's annual electrical expenses. It is also a physically
challenging process for the Mint's employees. As metal is heated and
poured in its molten state into ingots, it can reach 1500 degrees
Celsius. Ingots weighing 60 lbs. must be lifted and moved manually.
Therefore, the Mint wishes to discontinue melting and use mechanical
means (such as a hammer mill or rolling mill) to destroy mutilated
coins. However, as the proposed mechanical destruction process requires
that coins be separated by alloy, these mechanical methods cannot be
used to process fused coins or unsorted (mixed) coin lots. Because
mutilated coins delivered in lots of mixed alloy categories often are
in a condition which precludes machine sorting, redemption of mixed
coins can be labor-intensive and inefficient. As shown by the charts
below, fused and mixed coins represent a very small component of the
United States Mint's annual coin redemptions.
BILLING CODE 4810-37-P
[[Page 4064]]
[GRAPHIC] [TIFF OMITTED] TP27JA99.054
BILLING CODE 4810-37-C
For the foregoing reasons, the Mint wishes to amend Part 100 of 31
CFR to discontinue acceptance of fused and mixed coins for redemption,
and require that all bent or partial coins be separated by denomination
when submitted for redemption.
Certifications
This proposed regulation is not a significant regulatory action for
purposes of Executive Order 12866. The Mint has paid out less than $8
million in total annual mutilated coin redemptions for each of 1996,
1997 and the seven-month period ending July 31, 1998. For each such
period, fused and mixed coins as a group constitute less than 1% of
total coins redeemed, and approximately 1% or less of the total lots
redeemed. Fused and mixed coins are currently redeemed at metal rates
lower than the rates paid for sorted coins. For these reasons, the
United States Mint does not believe that the proposed regulation will
have an annual effect on the economy of $100 million or more or
materially adversely affect any sector of the economy, productivity,
competition, jobs, the environment, public health, or State, local, or
tribal governments or communities. The Mint does not anticipate that
the rule will result in inconsistency, interfere with another agency's
actions, materially alter the budgetary impact of entitlements, grants,
user fees, or loan programs or the rights and obligations of recipients
thereof, or raise novel legal or policy issues arising out of legal
mandates, the President's priorities, or the principles set forth in
Executive Order 12866. It is hereby certified that this proposed
regulation will not have a significant economic impact on a significant
number of small entities. Accordingly, a regulatory flexibility
analysis is not required. Lots of fused and mixed coins recorded
together as a group constituted approximately 1% or less of the total
coin lots redeemed for each of calendar 1996, 1997 and the period
ending July 31, 1998, amounting to 23, 19 and 13 lots, respectively, of
fused and mixed coins. Although the Mint does not maintain records
which consistently indicate the business or personal nature of the
transactions conducted by individuals or entities tendering coins for
redemption, the majority of these lots were submitted by individuals
transacting with the Mint in their own name. Even if each such
individual were a ``small entity'' within the meaning of 5 USC 604(a),
the Mint does not believe that this quantity of lots indicates that a
significant number of small entities will be significantly impacted if
the Mint were to require sorting of coins previously accepted as mixed
and discontinue accepting fused coins.
Comments
In lieu of hand-delivery, comments on the proposed rules may be
faxed to the attention of Gwen H. Mattleman at (202) 874-6479 or sent
by electronic mail to: legal@usmint.treas.gov. Hand delivery, U.S. mail
or fax are preferred.
List of Subjects in 31 CFR Part 100 Subpart C
Currency.
For the reasons set forth in the preamble, the United States Mint
proposes to amend 31 CFR Part 100 substantially as follows:
PART 100--EXCHANGE OF PAPER CURRENCY AND COIN
Subpart C--Exchange of Coin
1. The authority citation for Part 100 Subpart C is revised to
read as follows:
Authority: 31 U.S.C. 321.
2. Revise 100.11(b) to read as follows:
Sec. 100.11 Exchange of bent and partial coins.
* * * * *
(b) Redemption basis. Bent and partial coins shall be presented
separately by denomination category in lots of at least one pound for
each category. Bent and partial coins shall be redeemed on the
[[Page 4065]]
basis of their weight and denomination category rates (which is the
weight equivalent of face value). If not presented separately by
denomination category, bent and partial coins will not be accepted for
redemption. Denomination categories and rates are: Cents, @ $1.4585 per
pound; Nickels, @ $4.5359 per pound; Dimes, Quarters, Halves, and
Eisenhower Dollars @$20.00 per pound; and Anthony Dollars @ $56.00 per
pound. Copper plated zinc cents shall be redeemed at the face value
equivalent of copper one cent coins.
* * * * *
3. Revise 100.12(b) to read as follows:
Sec. 100.12 Exchange of fused and mixed coins.
* * * * *
(b) The United States Mint will not accept fused or mixed coins for
redemption.
Philip N. Diehl,
Director.
[FR Doc. 99-1683 Filed 1-26-99; 8:45 am]
BILLING CODE 4810-37-P