2013-01710. Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Certification Procedures for Products and Parts  

  • Start Preamble

    AGENCY:

    Federal Aviation Administration (FAA), DOT.

    ACTION:

    Notice and request for comments.

    SUMMARY:

    In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on October 2, 2012, vol. 77, no. 191, page 60166. 14 CFR part 21 prescribes certification standards for aircraft, aircraft engines, propellers appliances and parts. The information collected is used to determine compliance and applicant eligibility. The respondents are aircraft parts designers, manufacturers, and aircraft owners.

    DATES:

    Written comments should be submitted by February 27, 2013.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Kathy DePaepe at (405) 954-9362, or by email at: Kathy.A.DePaepe@faa.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    OMB Control Number: 2120-0018

    Title: Certification Procedures for Products and Parts

    Form Numbers: FAA Forms 8110-12, 8130-1, 8130-6, 8130-9, 8130-12.

    Type of Review: Renewal of an information collection.

    Background: 14 CFR part 21 prescribes certification standards for aircraft, aircraft engines, propellers appliances and parts. The information collected is used to determine compliance and applicant eligibility. FAA Airworthiness inspectors, designated inspectors, engineers, and designated engineers review the required data submittals to determine that aviation products and articles and their manufacturing facilities comply with the applicable requirements, and that the products and articles have no unsafe features.

    Respondents: Approximately 13,339 aircraft parts designers, manufacturers, and aircraft owners.

    Frequency: Information is collected on occasion.

    Estimated Average Burden per Response: 30 minutes.

    Estimated Total Annual Burden: 19,487 hours.

    ADDRESSES:

    Interested persons are invited to submit written comments on the proposed information collection to the Office of Information and Regulatory Affairs, Office of Management and Budget. Comments should be addressed to the attention of the Desk Officer, Department of Transportation/FAA, and sent via electronic mail to oira_submission@omb.eop.gov, or faxed to (202) 395-6974, or mailed to the Office of Information and Regulatory Affairs, Office of Management and Budget, Docket Library, Room 10102, 725 17th Street NW., Washington, DC 20503.

    Public Comments Invited: You are asked to comment on any aspect of this information collection, including (a) Whether the proposed collection of information is necessary for FAA's performance; (b) the accuracy of the estimated burden; (c) ways for FAA to enhance the quality, utility and clarity of the information collection; and (d) ways that the burden could be minimized without reducing the quality of the collected information. The agency will summarize and/or include your comments in the request for OMB's clearance of this information collection.

    Start Signature

    Issued in Washington, DC, on January 22, 2013.

    Albert R. Spence,

    FAA Assistant Information Collection Clearance Officer, IT Enterprises Business Services Division, AES-200.

    End Signature End Supplemental Information

    [FR Doc. 2013-01710 Filed 1-25-13; 8:45 am]

    BILLING CODE 4910-13-P

Document Information

Comments Received:
0 Comments
Published:
01/28/2013
Department:
Federal Aviation Administration
Entry Type:
Notice
Action:
Notice and request for comments.
Document Number:
2013-01710
Dates:
Written comments should be submitted by February 27, 2013.
Pages:
5856-5856 (1 pages)
PDF File:
2013-01710.pdf