2017-00058. Notice of Availability of the Environmental Protection Agency's Preliminary Interstate Ozone Transport Modeling Data for the 2015 Ozone National Ambient Air Quality Standard (NAAQS)  

  • Start Preamble

    AGENCY:

    Environmental Protection Agency (EPA).

    ACTION:

    Notice of data availability (NODA); request for public comment.

    SUMMARY:

    The Environmental Protection Agency (EPA) is providing notice that preliminary interstate ozone transport modeling data and associated methods relative to the 2015 ozone National Ambient Air Quality Standard (NAAQS) are available for public review and comment. This information is being provided to help states develop State Implementation Plans (SIPs) to address the requirements of Clean Air Act (CAA) section 110(a)(2)(D)(i)(I) for the 2015 ozone NAAQS. The information available includes: (1) Emission inventories for 2011 and 2023, supporting data used to develop those emission inventories, methods and data used to process emission inventories into a form that can be used for air quality modeling; and (2) air quality Start Printed Page 1734modeling results for 2011 and 2023, base period (i.e., 2009-2013) average and maximum ozone design value concentrations, projected 2023 average and maximum ozone design value concentrations, and projected 2023 ozone contributions from state-specific anthropogenic emissions and other contribution categories to ozone concentrations at individual ozone monitoring sites.

    A docket has been established to facilitate public review of the data and to track comments.

    DATES:

    Comments must be received on or before 90 days after publication in the Federal Register.

    ADDRESSES:

    Submit your comments, identified by Docket ID No. EPA-HQ-OAR-2016-0751, to the Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Once submitted, comments cannot be edited or withdrawn. The EPA may publish any comment received to its public docket. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Multimedia submissions (audio, video, etc.) must be accompanied by a written comment. The written comment is considered the official comment and should include discussion of all points you wish to make. The EPA will generally not consider comments or comment contents located outside of the primary submission (i.e., on the Web, Cloud, or other file sharing system). For additional submission methods, the full EPA public comment policy, information about CBI or multimedia submissions, and general guidance on making effective comments, please visit http://www2.epa.gov/​dockets/​commenting-epa-dockets.

    When submitting comments, remember to:

    1. Identify the notice by docket number and other identifying information (subject heading, Federal Register date and page number).

    2. Explain your comments, why you agree or disagree; suggest alternatives and substitute data that reflect your requested changes.

    3. Describe any assumptions and provide any technical information and/or data that you used.

    4. Provide specific examples to illustrate your concerns, and suggest alternatives.

    5. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

    6. Make sure to submit your comments by the comment period deadline identified.

    For additional information about the EPA's public docket, visit the EPA Docket Center homepage at http://www.epa.gov/​epahome/​dockets.htm.

    Docket: All documents in the docket are listed in the www.regulations.gov index. Although listed in the index, some information is not publicly available (e.g., CBI or other information whose disclosure is restricted by statute). Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available either electronically in www.regulations.gov or in hard copy at the Air and Radiation Docket and Information Center, EPA/DC, WJC West Building, Room 3334, 1301 Constitution Ave. NW., Washington, DC. The Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Public Reading Room is (202) 566-1744, and the telephone number for the Air Docket is (202) 566-1742.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    For questions on the emissions data and on how to submit comments on the emissions-related projection methodologies, contact Alison Eyth, Air Quality Assessment Division, Environmental Protection Agency, Mail code: C339-02, 109 T.W. Alexander Drive, Research Triangle Park, NC 27709; telephone number: (919) 541-2478; fax number: (919) 541-1903; email: eyth.alison@epa.gov. For questions on the preliminary air quality modeling and ozone contributions and how to submit comments on the air quality modeling data and related methodologies, contact Norm Possiel, Air Quality Assessment Division, Environmental Protection Agency, Mail code: C439-01, 109 T.W. Alexander Drive, Research Triangle Park, NC 27709; telephone number: (919) 541-5692; fax number: (919) 541-0044; email: possiel.norm@epa.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    I. Background

    On October 26, 2015 (80 FR 65292), the EPA published a rule revising the 8-hour ozone NAAQS from 0.075 parts per million (ppm) to a new, more protective level of 0.070 ppm. Section 110(a)(1) of the CAA requires states to submit SIPs that provide for the implementation, maintenance, and enforcement of a NAAQS within 3 years of the promulgation of a new or revised standard. Such plans are required to address the applicable requirements of CAA section 110(a)(2) and are generally referred to as “infrastructure” SIPs. Among the requirements in CAA section 110(a)(2) that must be addressed in these plans is the “Good Neighbor” provision, section 110(a)(2)(D)(i)(I), which requires states to develop SIPs that prohibit any source or other emissions activity within the state from emitting air pollutants in amounts that will contribute significantly to nonattainment or interfere with maintenance of the NAAQS in another state. With respect to the 2015 ozone NAAQS, the Good Neighbor SIPs are due within 3 years of promulgation of the revised NAAQS, or by October 26, 2018.

    On October 1, 2015, when EPA Administrator McCarthy signed the ozone NAAQS revision, the agency also issued a memorandum [1] to EPA Regional Administrators communicating a process for delivering the protections afforded by the revised NAAQS, including implementing CAA requirements like the Good Neighbor provision. In that memorandum, the EPA emphasized that we will be working with state, local, federal and tribal partners to carry out the duties of ozone air quality management in a manner that maximizes common sense, flexibility and cost-effectiveness while achieving improved public health expeditiously and abiding by the legal requirements of the CAA.

    The memorandum noted that the EPA believes that the Good Neighbor provision for the 2015 ozone NAAQS can be addressed in a timely fashion using the framework of the Cross-State Air Pollution Rule (CSAPR), especially given the court decisions upholding important elements of that framework.[2] The EPA also expressed its intent to issue timely information concerning interstate ozone transport for the 2015 ozone NAAQS as a first step to help Start Printed Page 1735facilitate the development of SIPs addressing the Good Neighbor provision. The EPA recognizes that the CAA provides that states have the primary responsibility to submit timely SIPs, as well as the EPA's own backstop role to develop and promulgate Federal Implementation Plans (FIPs), as appropriate.

    This notice includes preliminary air quality modeling data that will help states as they develop SIPs to address the cross-state transport of air pollution under the CAA's Good Neighbor provision as it pertains to the 2015 ozone NAAQS. These data are considered preliminary because states may choose to modify or supplement these data in developing their Good Neighbor SIPs and/or EPA may update these data for the purpose of potential future analyses or regulatory actions related to interstate ozone transport for the 2015 ozone NAAQS.

    The EPA has applied what it refers to as the CSAPR framework to address the requirements of the Good Neighbor provision for regional pollutants like ozone. This framework involves a 4-step process: (1) Identifying downwind receptors that are expected to have problems attaining or maintaining clean air standards (i.e., NAAQS); (2) determining which upwind states contribute to these problems in amounts sufficient to “link” them to the downwind air quality problems; (3) for states linked to downwind air quality problems, identifying upwind emissions that significantly contribute to nonattainment or interfere with maintenance of the NAAQS by quantifying upwind reductions in ozone precursor emissions and apportioning emission reduction responsibility among upwind states; and (4) for states that are found to have emissions that significantly contribute to nonattainment or interfere with maintenance or the NAAQS downwind, adopting SIPs or FIPs that eliminate such emissions. The EPA applied this framework in the original CSAPR rulemaking (76 FR 48208) to address the Good Neighbor provision for the 1997 ozone NAAQS and the 1997 and 2006 fine particulate matter (PM2.5) NAAQS. On October 26, 2016 (81 FR 74504), the EPA again applied this framework in an update to CSAPR (referred to as the CSAPR Update) to address the Good Neighbor provision for the 2008 ozone NAAQS. This notice provides information regarding steps 1 and 2 of the CSAPR framework for purposes of evaluating interstate transport with respect to the 2015 ozone NAAQS. This preliminary modeling to quantify contributions for the year 2023 is intended to help inform state efforts to address interstate transport with respect to the 2015 ozone NAAQS.

    The year 2023 was used as the analytic year for this preliminary modeling because that year aligns with the expected attainment year for Moderate ozone nonattainment areas, given that the CAA requires the EPA to finalize area designations for the 2015 ozone NAAQS in October 2017.[3] See North Carolina v. EPA, 531 F.3d 896, 911-12 (D.C. Cir. 2008), modified on reh'g, 550 F.3d 1176 (holding the Good Neighbor provision requires implementation of emissions reductions be harmonized with the applicable downwind attainment dates).

    As noted above, this notice meets the EPA's stated intention in the October 2015 memorandum to provide information relevant to the Good Neighbor provision for the 2015 ozone NAAQS. Specifically, this notice evaluates states' contributions to downwind ozone problems relative to the screening threshold—equivalent to 1 percent of the NAAQS—that the CSAPR framework uses to identify states “linked” to downwind air quality problems for further consideration to address interstate ozone transport. The EPA believes that states will find this information useful in their development of Good Neighbor SIPs for the 2015 ozone NAAQS, and we seek their comments on it.[4] The EPA believes that states may rely on this or other appropriate modeling, data or analyses to develop approvable Good Neighbor SIPs which, as noted previously, are due on October 26, 2018. States that act now to address their planning obligation pursuant to the Good Neighbor provision would benefit from improved ozone air quality both within the state and with respect to other states.

    This notice provides an opportunity for review and comment on the agency's preliminary ozone transport modeling data relevant for the 2015 ozone NAAQS.

    II. Air Quality Modeling and Related Data and Methodologies

    A. Base Year and Future Base Case Emissions

    For this transport assessment, the EPA used a 2011-based modeling platform to develop base year and future year emissions inventories for input to air quality modeling. This platform included meteorology for 2011, base year emissions for 2011, and future year base case emissions for 2023. The 2011 and 2023 air quality modeling results were used to identify areas that are projected to be nonattainment or have problems maintaining the 2015 ozone NAAQS in 2023. Ozone source apportionment modeling for 2023 was used to quantify contributions from emissions in each state to ozone concentrations at each of the projected nonattainment and maintenance receptors in that future year.[5]

    The 2011 and 2023 emissions data and the state and federal rules included in the 2023 base case are described in detail in the documents, “Preparation of Emissions Inventories for the Version 6.3 2011 Emissions Modeling Platform”; “Updates to Emissions Inventories for the Version 6.3, 2011 Emissions Modeling Platform for the Year 2023”; and “EPA Base Case v.5.16 for 2023 Ozone Transport NODA Using IPM Incremental Documentation”; all of which are available in the docket for this notice.

    In brief, the 2011 base year emissions and projection methodologies used here to create emissions for 2023 are similar to what was used in the final CSAPR Update. The key differences between the 2011 inventories used for the final CSAPR Update and the 2011 inventories used for the 2015 ozone NAAQS preliminary interstate transport modeling include updates to mobile source and electric generating unit (EGU) emissions, the inclusion of fire emissions in Canada and Mexico, and updated estimates of anthropogenic emissions for Mexico. The key differences in methodologies for projecting non-EGU sector emissions (e.g., onroad and nonroad mobile, oil Start Printed Page 1736and gas, non-EGU point sources) to 2023 as compared to the methods used in the final CSAPR Update to project emissions to 2017 include (1) the use of data from the U.S. Energy Information Administration Annual Energy Outlook 2016 (AEO 2016) to project activity data for onroad mobile sources and the growth in oil and gas emissions, (2) additional general refinements to the projection of oil and gas emissions, (3) incorporation of data from the Mid-Atlantic Regional Air Management Association (MARAMA) for projection of non-EGU emissions for states in that region, and (4) updated mobile source emissions for California.

    For EGUs, the EPA has included several key updates to the Integrated Planning Model (IPM) and its inputs for the agency's 2023 EGU projections used for the air quality modeling provided in this NODA. The updated IPM assumptions incorporated in the EPA's Base Case v.5.16 capture several market trends occurring in the power sector today, and the 2023 EGU projections reflect a continuation of these trends. Notably, natural gas prices remain historically low and are expected to remain low in the foreseeable future given that gas production and pipeline capacity continue to increase while storage is already at an all-time high. These factors have contributed to record-setting U.S. natural gas production levels for the fifth consecutive year in 2015 and record-setting consumption levels for the sixth consecutive year. Additionally, electricity demand growth (including retail sales and direct use) has slowed in every decade since the 1950s, from 9.8 percent per year from 1949 to 1959 to 0.5 percent per year from 2000 to 2015. This trend is projected to continue: AEO 2016 projects lower growth than projected in AEO 2015. In addition, these updated emission projections account for a continuing decline in the cost of renewable energy technologies such as wind and solar, as well as the recently extended production and investment tax credits that support their deployment. All of these factors result in decreased generation and capacity from conventional coal steam relative to EPA's EGU analyses that preceded these updated IPM inputs. Over the past 10 years, coal-fired electricity generation in the U.S. has declined from providing roughly half of the nation's supply to about one-third, and has been replaced with lower-cost sources such as natural gas, wind, and solar.

    The updated EGU projections also include the Clean Power Plan (CPP), 80 FR 64662 (October 23, 2015). The modeling for the CSAPR Update did not include the CPP due to the former rule's focus on the 2017 ozone season, see 81 FR at 74529. In the CSAPR Update rulemaking, the agency had identified several key factors and uncertainties associated with measuring the effects of the CPP in 2017, but explained that the EPA “continues to believe that the modeling for the CPP . . . was useful and reliable with respect to the model years analyzed for [the CPP] (i.e., 2020, 2025, and 2030).” Id.. The period of focus for the modeling here is in the mid-2020s, which falls within the CPP's interim performance period, and the EPA therefore believes it is appropriate to include the CPP in the modeling.[6] The CPP is targeted at reducing carbon pollution, but on average, nationwide, the CPP would also reduce NOX emissions from EGUs. The agency therefore anticipates that, if the CPP were removed from the modeling, the overall net effect could be higher levels of NOX emissions, on average, and potentially higher ozone concentrations and contributions at receptors. However, note that NOX emissions from EGUs represent just one part of the total NOX inventory. In this regard, for many states it is possible that changes in EGU NOX emissions on the order of what might be expected in 2023 due to the CPP may have limited impact on the concentration and contribution data in this NODA, which are based on total NOX emissions.

    As noted above, EGU emissions used for the air quality modeling in this NODA are based on IPM v5.16 projections. However, states may choose to use other EGU projections in developing their Good Neighbor SIPs. To continue to update and improve both EPA's and states' EGU projections, the EPA and state agencies, with the facilitation of multi-jurisdictional organizations (MJOs), have been collaborating in a technical engagement process to inform future-year emission projections for EGUs. The ongoing information exchange and data comparison have facilitated a clearer understanding of the capabilities and constraints of various tools and methods. This process will continue to inform how the EPA and states produce EGU emission projections to inform efforts to reduce ozone transport.

    The EPA observes there are differences between recent emissions and generation data and the corresponding future-year projections in this NODA. The EPA's modeling directly simulates how future-year energy trends and economic signals affect the composition of the fleet. In the 2023 projections presented in this NODA, the EPA's modeling does not project the operation of a number of coal-fired and oil-fired units due to simulated future-year economic conditions, whether or not such capacity has publicly-released plans to retire.[7] Some other projection methodologies, such as the approach used by the Eastern Regional Technical Advisory Committee (ERTAC), purposefully maintain the current composition of the fleet except where operators have announced expected changes. Comparing these projections is informative because there is inherent uncertainty in anticipating any future-year composition of the EGU fleet, since analysts cannot know in advance exactly which operators will decide to retire which facilities at any given time. The EPA is soliciting comments on whether and, if so, how different projection techniques for EGUs would affect emissions and air quality in a manner that could further assist states with their analysis of transported air pollution.

    B. Air Quality Modeling

    For the final CSAPR Update, EPA used the Comprehensive Air Quality Model with Extensions (CAMx) v6.20 as the air quality model. After the EPA performed air quality modeling for the final CSAPR Update, Ramboll Environ, the CAMx model developer, released an updated version of CAMx (version 6.30). In addition, EPA has recently sponsored updates to the Carbon Bond chemical mechanism in CAMx v6.30 related to halogen chemistry reactions that deplete ozone in marine (i.e., salt water) environments. The updated chemistry is included in a new version 6.32 which the EPA has used for this analysis. Specifically, EPA used CAMx v6.32 for the 2011 base year and 2023 future base case air quality modeling to identify receptors and quantify contributions for the 2015 NAAQS transport assessment. Information on this version of CAMx can be found in the Release Notes and User's Guide for CAMx v6.30 and in a Start Printed Page 1737technical report describing the updated halogen chemistry in version 6.32. These documents can be found in the docket for this notice.[8] Details of the 2011 and 2023 CAMx model applications are described in the “Air Quality Modeling Technical Support Document for the 2015 Ozone NAAQS Preliminary Interstate Transport Assessment” (AQM TSD) which is available in the docket for this notice.

    C. Information Regarding Potential 2023 Nonattainment and Maintenance Sites

    The ozone predictions from the 2011 and 2023 CAMx model simulations were used to project 2009-2013 average and maximum ozone design values [9] to 2023 following the approach described in the EPA's draft guidance for attainment demonstration modeling.[10] Using the approach in the final CSAPR Update, we evaluated the 2023 projected average and maximum design values in conjunction with the most recent measured ozone design values (i.e., 2013-2015) to identify sites that may warrant further consideration as potential nonattainment or maintenance sites in 2023.[11] If the approach in the CSAPR Update is applied to evaluate the projected design values, those sites with 2023 average design values that exceed the NAAQS and that are currently measuring nonattainment would be considered to be nonattainment receptors in 2023. Similarly, with the CSAPR Update approach, monitoring sites with a projected 2023 maximum design value that exceeds the NAAQS would be projected to be maintenance receptors in 2023. In the CSAPR Update approach, maintenance-only receptors include both those monitoring sites where the projected 2023 average design value is below the NAAQS, but the maximum design value is above the NAAQS, and monitoring sites with projected 2023 average design values that exceed the NAAQS, but for which current design values based on measured data do not exceed the NAAQS.

    The base period 2009-2013 ambient and projected 2023 average and maximum design values and 2013-2015 and preliminary 2014-2016 measured design values at individual projected 2023 nonattainment receptor sites and maintenance-only receptor sites are provided in Tables 1 and 2, respectively.[12]

    Table 1A—2009-2013 and 2023 Average and Maximum Design Values and 2013-2015 and Preliminary 2014-2016 Design Values (DVs) at Projected Nonattainment Receptor Sites in the East 13

    [Units are ppb]

    Site IDCountySt2009-2013 Average DV2009-2013 Maximum DV2023 Average DV2023 Maximum DV2013-2015 DV2014-2016 DV
    240251001HarfordMD90.09371.373.77173
    360850067RichmondNY81.38371.272.77476
    361030002SuffolkNY83.38571.372.77272
    480391004BrazoriaTX88.08974.475.38075
    482010024HarrisTX80.38371.173.57979
    482011034HarrisTX81.08271.672.57473
    484392003TarrantTX87.39073.976.27673
    484393009TarrantTX86.08672.072.07875
    551170006SheboyganWI84.38771.073.37779

    Table 1B—2009-2013 and 2023 Average and Maximum Design Values and 2013-2015 and Preliminary 2014-2016 Design Values at Projected Nonattainment Receptor Sites in the West

    [Units are ppb]

    Site IDCountySt2009-2013 Average DV2009-2013 Maximum DV2023 Average DV2023 Maximum DV2013-2015 DV2014-2016 DV
    60190007FresnoCA94.79578.979.18686
    60190011FresnoCA93.09677.880.38588
    60190242FresnoCA91.79579.282.08686
    60194001FresnoCA90.79273.074.08991
    60195001FresnoCA97.09979.180.88894
    60250005ImperialCA74.77672.874.17776
    60251003ImperialCA81.08278.579.57876
    60290007KernCA91.79676.980.58187
    60290008KernCA86.38871.272.67881
    60290014KernCA87.78972.773.88484
    60290232KernCA87.38972.774.17877
    60311004KingsCA87.09071.073.58084
    60370002Los AngelesCA80.08273.975.78286
    60370016Los AngelesCA94.09786.889.69295
    Start Printed Page 1738
    60371201Los AngelesCA90.09080.380.38485
    60371701Los AngelesCA84.08578.379.28990
    60376012Los AngelesCA97.39986.588.09496
    60379033Los AngelesCA90.09176.777.58990
    60392010MaderaCA85.08671.772.68183
    60650012RiversideCA97.39983.084.49293
    60651016RiversideCA100.710185.185.39897
    60652002RiversideCA84.38572.272.88181
    60655001RiversideCA92.39379.480.08787
    60656001RiversideCA94.09878.481.79091
    60658001RiversideCA97.09886.787.69295
    60658005RiversideCA92.79482.984.18591
    60659001RiversideCA88.39173.375.68486
    60670012SacramentoCA93.39574.175.48083
    60710005San BernardinoCA105.010796.398.1102108
    60710012San BernardinoCA95.09784.486.28891
    60710306San BernardinoCA83.78575.576.78686
    60711004San BernardinoCA96.79889.791.096100
    60712002San BernardinoCA101.010392.994.79797
    60714001San BernardinoCA94.39786.088.58891
    60714003San BernardinoCA105.010794.195.9101101
    60719002San BernardinoCA92.39479.881.28686
    60719004San BernardinoCA98.79988.588.799104
    60990006StanislausCA87.08873.674.58283
    61070009TulareCA94.79675.876.98989
    61072010TulareCA89.09072.673.48182

    Table 2A—2009-2013 and 2023 Average and Maximum Design Values and 2013-2015 and Preliminary 2014-2016 Design Values at Projected Maintenance-Only Receptor Sites in the East

    [Units are ppb]

    Site IDCountySt2009-2013 Average DV2009-2013 Maximum DV2023 Average DV2023 Maximum DV2013-2015 DV2014-2016 DV
    90013007FairfieldCT84.38969.473.28381
    90019003FairfieldCT83.78770.573.38485
    90099002New HavenCT85.78969.872.57876
    260050003AlleganMI82.78668.871.57574
    261630019WayneMI78.78169.671.77072
    360810124QueensNY78.08069.971.76969
    481210034DentonTX84.38770.873.08380
    482010026HarrisTX77.38068.671.06868
    482011039HarrisTX82.08473.074.86967
    482011050HarrisTX78.38069.571.07170

    Table 2B—2009-2013 and 2023 Average and Maximum Design Values and 2013-2015 and Preliminary 2014-2016 Design Values at Projected Maintenance-Only Receptor Sites in the West

    [Units are ppb]

    Site IDCountySt2009-2013 Average DV2009-2013 Maximum DV2023 Average DV2023 Maximum DV2013-2015 DV2014-2016 DV
    60295002KernCA84.39170.476.08588
    60296001KernCA84.38670.672.07981
    60372005Los AngelesCA78.08270.674.37483
    61070006TulareCA81.78569.171.88484
    61112002VenturaCA81.08370.772.47777
    80350004DouglasCO80.78369.671.67977
    80590006JeffersonCO80.38370.572.97977
    80590011JeffersonCO78.78269.772.78080
    Start Printed Page 1739

    D. Information Regarding Quantification of Ozone Contributions

    The EPA performed nationwide, state-level ozone source apportionment modeling using the CAMx Ozone Source Apportionment Technology/Anthropogenic Precursor Culpability Analysis (OSAT/APCA) technique [14] to provide information regarding the expected contribution of 2023 base case NOX and VOC emissions from all sources in each state to projected 2023 ozone concentrations at each air quality monitoring site. In the source apportionment model run, we tracked the ozone formed from each of the following contribution categories (i.e., “tags”):

    • States—anthropogenic NOX and VOC emissions from each of the contiguous 48 states and the District of Columbia tracked individually (emissions from all anthropogenic sectors in a given state were combined);
    • Biogenics—biogenic NOX and VOC emissions domain-wide (i.e., not by state);
    • Boundary Concentrations—concentrations transported into the modeling domain from the lateral boundaries;
    • Tribes—the emissions from those tribal lands for which we have point source inventory data in the 2011 NEI (we did not model the contributions from individual tribes);
    • Canada and Mexico—anthropogenic emissions from sources in the portions of Canada and Mexico included in the modeling domain (contributions from Canada and Mexico were not modeled separately);
    • Fires—combined emissions from wild and prescribed fires domain-wide (i.e., not by state); and
    • Offshore—combined emissions from offshore marine vessels and offshore drilling platforms (i.e., not by state).

    The CAMx source apportionment model simulation was performed for the period May 1 through September 30 using the 2023 future base case emissions and 2011 meteorology for this time period. The hourly contributions [15] from each tag were processed to obtain the 8-hour average contributions corresponding to the time period of the 8-hour daily maximum concentration on each day in the 2023 model simulation. This step was performed for those model grid cells containing monitoring sites in order to obtain 8-hour average contributions for each day at the location of each site. The model-predicted contributions were applied in a relative sense to quantify the contributions to the 2023 average design value at each site. Additional details on the source apportionment modeling and the procedures for calculating contributions can be found in the AQM TSD. The resulting 2023 contributions from each tag to each monitoring site are provided in a file in the docket for this notice.[16] The largest contributions from each state to 2023 downwind nonattainment receptors and to downwind maintenance-only receptors are provided in Tables 3-1 and 3-2, respectively.

    Table 3-1—Largest Contribution From Each State to Downwind 8-Hour Ozone Nonattainment Receptors

    [Units are ppb]

    Upwind statesLargest contribution to a downwind nonattainment receptorUpwind statesLargest contribution to a downwind nonattainment receptor
    Alabama0.37Montana0.09
    Arizona0.74Nebraska0.37
    Arkansas1.16Nevada0.62
    California0.19New Hampshire0.01
    Colorado0.32New Jersey11.73
    Connecticut0.43New Mexico0.18
    Delaware0.55New York0.19
    District of Columbia0.70North Carolina0.43
    Florida0.49North Dakota0.15
    Georgia0.38Ohio2.38
    Idaho0.07Oklahoma2.39
    Illinois14.92Oregon0.61
    Indiana7.14Pennsylvania9.11
    Iowa0.43Rhode Island0.00
    Kansas1.01South Carolina0.16
    Kentucky2.15South Dakota0.08
    Louisiana2.87Tennessee0.52
    Maine0.01Texas1.92
    Maryland1.73Utah0.24
    Massachusetts0.05Vermont0.00
    Michigan1.77Virginia5.04
    Minnesota0.43Washington0.15
    Mississippi0.56West Virginia2.59
    Missouri1.20Wisconsin0.47
    Wyoming0.31
    Start Printed Page 1740

    Table 3-2—Largest Contribution From Each State to Downwind 8-Hour Ozone Maintenance Receptors

    [Units are ppb]

    Upwind statesLargest contribution to a downwind maintenance receptorUpwind statesLargest contribution to a downwind maintenance receptor
    Alabama0.48Montana0.11
    Arizona0.52Nebraska0.41
    Arkansas2.20Nevada0.43
    California2.03New Hampshire0.02
    Colorado0.25New Jersey8.65
    Connecticut0.36New Mexico0.41
    Delaware0.38New York15.36
    District of Columbia0.08North Carolina0.43
    Florida0.22North Dakota0.13
    Georgia0.31Ohio3.82
    Idaho0.16Oklahoma1.30
    Illinois21.69Oregon0.17
    Indiana6.45Pennsylvania6.39
    Iowa0.60Rhode Island0.02
    Kansas0.64South Carolina0.15
    Kentucky1.07South Dakota0.06
    Louisiana3.37Tennessee0.69
    Maine0.00Texas2.49
    Maryland2.20Utah1.32
    Massachusetts0.11Vermont0.01
    Michigan1.76Virginia2.03
    Minnesota0.34Washington0.11
    Mississippi0.65West Virginia0.92
    Missouri2.98Wisconsin1.94
    Wyoming0.92

    In CSAPR and the CSAPR Update, the EPA used a contribution screening threshold of 1 percent of the NAAQS to identify upwind states that may significantly contribute to downwind nonattainment and/or maintenance problems and which warrant further analysis to determine if emissions reductions might be required from each state to address the downwind air quality problem. The EPA determined that 1 percent was an appropriate threshold to use in the analysis for those rulemakings because there were important, even if relatively small, contributions to identified nonattainment and maintenance receptors from multiple upwind states mainly in the eastern U.S. The agency has historically found that the 1 percent threshold is appropriate for identifying interstate transport linkages for states collectively contributing to downwind ozone nonattainment or maintenance problems because that threshold captures a high percentage of the total pollution transport affecting downwind receptors.

    Based on the approach used in CSAPR and the CSAPR Update, upwind states that contribute ozone in amounts at or above the 1 percent of the NAAQS threshold to a particular downwind nonattainment or maintenance receptor would be considered to be “linked” to that receptor in step 2 of the CSAPR framework for purposes of further analysis in step 3 to determine whether and what emissions from the upwind state contribute significantly to downwind nonattainment and interfere with maintenance of the NAAQS at the downwind receptors. For the 2015 ozone NAAQS, the value of a 1 percent threshold would be 0.70 ppb. The individual upwind state to downwind receptor “linkages” and contributions based on a 0.70 ppb threshold are identified in the AQM TSD for this notice.

    The EPA notes that, when applying the CSAPR framework, an upwind state's linkage to a downwind receptor alone does not determine whether the state significantly contributes to nonattainment or interferes with maintenance of a NAAQS to a downwind state. While the 1 percent screening threshold has been traditionally applied to evaluate upwind state linkages in eastern states where such collective contribution was identified, the EPA noted in the CSAPR Update that, as to western states, there may be geographically specific factors to consider in determining whether the 1 percent screening threshold is appropriate. For certain receptors, where the collective contribution of emissions from one or more upwind states may not be a considerable portion of the ozone concentration at the downwind receptor, the EPA and states have considered, and could continue to consider, other factors to evaluate those states' planning obligation pursuant to the Good Neighbor provision.[17] However, where the collective contribution of emissions from one or more upwind states is responsible for a considerable portion of the downwind air quality problem, the CSAPR framework treats a contribution from an individual state at or above 1 percent of the NAAQS as significant, and this reasoning applies regardless of where the receptor is geographically located.

    III. Analytic Information Available for Public Comment

    The EPA has placed key information related to the air quality model applications into the electronic docket for this notice. This information includes the AQM TSD, an Excel file which contains the 2009-2013 base period and 2023 projected average and maximum ozone design values at individual monitoring sites and the Start Printed Page 1741ozone contributions to individual monitoring sites from anthropogenic emissions in each state and from the other individual categories included in the source apportionment modeling. Also in the docket for this notice are a number of emission summaries by sector, state, county, source classification code, month, unit, day, and control program. In addition, the raw emission inventory files, ancillary data, and scripts used to develop the air quality model-ready emissions which are not in a format accepted by the electronic docket are available from the Air Emissions Modeling Web site for the Version 6.3 Platform at https://www.epa.gov/​air-emissions-modeling/​2011-version-63-platform. Electronic copies of the emissions and non-emissions air quality modeling input files, the CAMx v6.32 model code and run scripts, and the air quality modeling output files from the 2011 and 2023 air quality modeling performed for the 2015 NAAQS ozone transport assessment can be obtained by contacting Norm Possiel at possiel.norm@epa.gov.

    The EPA is requesting comment on the components of the 2011 air quality modeling platform, the methods for projecting 2023 ozone design value concentrations and the methods for calculating ozone contributions. The EPA is also seeking comment on the methods used to project emissions to future years, where 2023 is an example of such a year. Specifically, comments are requested regarding new datasets, impacts of existing and planned federal, state, and local control programs on emissions, and new methods that could be used to prepare more representative emissions projections. That is, EPA is seeking comments on the projection approach and data sets that are potentially useful for computing projected emissions. Commenters wishing to comment on inventory projection methods should submit to the docket comments that describe an alternative approach to the existing methods, along with documentation describing why that method is an improvement over the existing method. Summaries of the base and projected future year emission inventories are provided in the docket to aid in the review of these data. As indicated above, the comment period for this notice is 90 days from the date of publication in the Federal Register.

    Start Signature

    Dated: December 28, 2016.

    Stephen Page,

    Director, Office of Air Quality Planning and Standards.

    End Signature End Supplemental Information

    Footnotes

    1.  Memorandum from Janet McCabe, Acting Assistant administrator, Office of Air and Radiation to Regional Administrators, Regions 1-10, “Implementing the 2015 Ozone National Ambient Air Quality Standards,” available at https://www.epa.gov/​sites/​production/​files/​2015-10/​documents/​implementation_​memo.pdf.

    Back to Citation

    2.  See EPA v. EME Homer City Generation, L.P., 134 S. Ct. 1584, 1607 (2014) (holding the EPA's use of uniform oxides of nitrogen (NOX) stringency to apportion emission reduction responsibilities among upwind states “is an efficient and equitable solution to the allocation problem the Good Neighbor Provision requires the Agency to address”); EME Homer City Generation, L.P. v. EPA, 795 F.3d 118, 135-36 (D.C. Cir. 2015) (affirming EPA's use of air quality modeling to project future nonattainment and maintenance receptors and to calculate emissions budgets, and holding that the EPA affords independent effect to the “interfere with maintenance” prong of the Good Neighbor provision in identifying maintenance receptors).

    Back to Citation

    3.  See 42 U.S.C. 7407(d)(1)(B) (requiring the EPA to finalize designations no later than 2 years after promulgation of a new or revised NAAQS). On November 17, 2016 (81 FR 81276), the EPA proposed to retain its current approach in establishing attainment dates for each nonattainment area classification, which run from the effective date of designations. This approach is codified at 40 CFR 51.1103 for the 2008 ozone NAAQs, and the EPA proposed to retain the same approach for the 2015 ozone NAAQS. In addition, the EPA proposed the maximum attainment dates for nonattainment areas in each classification, which for Moderate ozone nonattainment is 6 years.

    Back to Citation

    4.  Note that the emissions projections in this NODA are consistent with the implementation of various state and federal regulations, and that any change to the future implementation of these regulations may impact these projections and related findings.

    Back to Citation

    5.  The 2023 ozone source apportionment modeling was performed using meteorology for the period May through September in order to focus on transport when 8-hour ozone concentrations are typically high at most locations. This modeling did not include high winter ozone concentrations that have been observed in certain parts of the Western U.S. which are believed to result from the combination of strong wintertime inversions, large NOx and volatile organic compound (VOC) emissions from nearby oil and gas operations, increased ultraviolet (UV) radiation intensity due to reflection off of snow-covered surfaces and potentially other local factors.

    Back to Citation

    6.  The CPP is stayed by the Supreme Court. West Virginia et al. v. EPA, No. 15A773 (U.S. Feb. 9, 2016). It is currently unclear what adjustments, if any, will need to be made to the CPP's implementation timing in light of the stay.

    Back to Citation

    7.  Note that much of this change in operation is projected to occur as early as 2020, which is the first year of the 25-year horizon over which EPA's model is optimizing. EPA's modeling adopts the assumption of perfect foresight, which implies that agents know precisely the nature and timing of conditions in future years (e.g., future natural gas supply, future demand) that affect the ultimate cost of decisions along the way. With this perfect foresight, the model looks throughout the entire modeling horizon and selects the overall lowest cost solution for the power sector over that time.

    Back to Citation

    8.  CAMx v6.32 is a pre-release version of CAMx v6.40 which is expected to be made public by Ramboll Environ in late 2016 or early 2017.

    Back to Citation

    9.  The ozone design value for a monitoring site is the 3-year average of the annual fourth-highest daily maximum 8-hour average ozone concentration.

    Back to Citation

    10.  The December 3, 2014 ozone, fine particulate matter, and regional haze SIP modeling guidance is available at http://www.epa.gov/​ttn/​scram/​guidance/​guide/​Draft_​O3-PM-RH_​Modeling_​Guidance-2014.pdf.

    Back to Citation

    11.  In determining compliance with the NAAQS, ozone design values are truncated to integer values. For example, a design value of 70.9 parts per billion (ppb) is truncated to 70 ppb which is attainment. In this manner, design values at or above 71.0 ppb are considered to exceed the NAAQS.

    Back to Citation

    12.  The preliminary 2014-2016 design values are based on data from the Air Quality System (AQS) and AirNow and have not been certified by state agencies. Note that for some sites the preliminary 2014-2016 design values are higher than the corresponding data for 2013-2015.

    Back to Citation

    13.  In this notice, the East includes all states from Texas northward to North Dakota and eastward to the East Coast. All states in the contiguous U.S. from New Mexico northward to Montana and westward to the West Coast are considered, for this notice, to be in the West.

    Back to Citation

    14.  As part of this technique, ozone formed from reactions between biogenic VOC and NOX with anthropogenic NOX and VOC are assigned to the anthropogenic emissions.

    Back to Citation

    15.  Ozone contributions from anthropogenic emissions under “NOX-limited” and “VOC-limited” chemical regimes were combined to obtain the net contribution from NOX and VOC anthropogenic emissions in each state.

    Back to Citation

    16.  The file containing the contributions is named: “2015 O3 NAAQS Transport Assessment_Design Values & Contributions.”

    Back to Citation

    17.  See, e.g., 81 FR 31513 (May 19, 2016) (approving Arizona Good Neighbor SIP addressing 2008 ozone NAAQS based on determination that upwind states would not collectively contribute to a considerable portion of the downwind air quality problem).

    Back to Citation

    [FR Doc. 2017-00058 Filed 1-5-17; 8:45 am]

    BILLING CODE 6560-50-P

Document Information

Published:
01/06/2017
Department:
Environmental Protection Agency
Entry Type:
Notice
Action:
Notice of data availability (NODA); request for public comment.
Document Number:
2017-00058
Dates:
Comments must be received on or before 90 days after publication in the Federal Register.
Pages:
1733-1741 (9 pages)
Docket Numbers:
EPA-HQ-OAR-2016-0751, FRL-9958-02-OAR
PDF File:
2017-00058.Pdf
Supporting Documents:
» Air Quality Modeling Technical Support Document for the 2015 Ozone NAAQS Preliminary Interstate Transport Assessment
» IPM Flat File Inputs
» NEEDS User Guide
» Guide to IPM Output Files
» EPA Base Case v.5.16 for 2015 Ozone NAAQS Transport NODA Using IPM Incremental Documentation
» IPM Run Files
» National Electric Energy Data System (NEEDS) v.5.16 database
» 2023 Parsed File
» IPM System Summary Report
» IPM State-Level Emissions