-
Start Preamble
Start Printed Page 61002
AGENCY:
Agricultural Marketing Service, USDA.
ACTION:
Proposed rule.
SUMMARY:
This rule invites comments on a proposed Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order (Order). Softwood lumber is used in products like flooring, siding and framing. The program would be financed by an assessment on softwood lumber domestic manufacturers and importers and would be administered by a board of industry members selected by the Secretary of Agriculture (Secretary). The initial assessment rate would be $0.35 per thousand board feet of softwood lumber shipped within or imported to the United States. The purpose of the program would be to strengthen the position of softwood lumber in the marketplace, maintain and expand markets for softwood lumber, and develop new uses for softwood lumber within the United States. A referendum would be held among eligible domestic manufacturers and importers to determine whether they favor implementation of the program prior to it going into effect. This rule also announces the Agricultural Marketing Service's (AMS) intent to request approval by the Office of Management and Budget (OMB) of new information collection requirements to implement the program.
DATES:
Comments must be received by November 30, 2010. Pursuant to the Paperwork Reduction Act (PRA), comments on the information collection burden that would result from this proposal must be received by November 30, 2010.
ADDRESSES:
Interested persons are invited to submit written comments concerning this proposal. Comments may be submitted on the Internet at: http://www.regulations.gov or to the Research and Promotion Branch, Fruit and Vegetable Programs, AMS, USDA, 1400 Independence Avenue, SW., Room 0632-S, Stop 0244, Washington, DC 20250-0244; facsimile: (202) 205-2800. All comments should reference the docket number and the date and page number of this issue of the Federal Register and will be made available for public inspection, including name and address, if provided, in the above office during regular business hours or it can be viewed at http://www.regulations.gov.
Pursuant to the PRA, comments regarding the accuracy of the burden estimate, ways to minimize the burden, including the use of automated collection techniques or other forms of information technology, or any other aspect of this collection of information, should be sent to the above address. In addition, comments concerning the information collection should also be sent to the Desk Office for Agriculture, Office of Information and Regulatory Affairs, OMB, New Executive Office Building, 725 17th Street, NW., Room 725, Washington, DC 20503.
Start Further InfoFOR FURTHER INFORMATION CONTACT:
Maureen T. Pello, Marketing Specialist, Research and Promotion Branch, Fruit and Vegetable Programs, AMS, USDA, P.O. Box 831, Beavercreek, Oregon 97004; telephone: (503) 632-8848; facsimile (503) 632-8852; or electronic mail: Maureen.Pello@ams.usda.gov.
End Further Info End Preamble Start Supplemental InformationSUPPLEMENTARY INFORMATION:
This rule is issued pursuant to the Commodity Promotion, Research, and Information Act of 1996 (1996 Act) (7 U.S.C. 7411-7425).
Executive Order 12866
This rule has been determined to be not significant for purposes of Executive Order 12866 and therefore has not been reviewed by the OMB.
Executive Order 12988
This rule has been reviewed under Executive Order 12988, Civil Justice Reform. It is not intended to have retroactive effect. Section 524 of the 1996 Act provides that it shall not affect or preempt any other Federal or State law authorizing promotion or research relating to an agricultural commodity.
Under section 519 of the 1996 Act, a person subject to an order may file a written petition with the U.S. Department of Agriculture (USDA) stating that an order, any provision of an order, or any obligation imposed in connection with an order, is not established in accordance with the law, and request a modification of an order or an exemption from an order. Any petition filed challenging an order, any provision of an order, or any obligation imposed in connection with an order, shall be filed within two years after the effective date of an order, provision, or obligation subject to challenge in the petition. The petitioner will have the opportunity for a hearing on the petition. Thereafter, USDA will issue a ruling on the petition. The 1996 Act provides that the district court of the United States for any district in which the petitioner resides or conducts business shall have the jurisdiction to review a final ruling on the petition, if the petitioner files a complaint for that purpose not later than 20 days after the date of the entry of USDA's final ruling.
Background
This rule invites comments on a proposed industry-funded research, promotion, and information program for softwood lumber. Softwood lumber is used in products like flooring, siding and framing. The program would be financed by an assessment on softwood lumber domestic manufacturers and importers and would be administered by a board of industry members selected by the Secretary. The initial assessment rate would be $0.35 per thousand board feet of softwood lumber shipped within or imported to the United States. Entities that domestically ship or import less than 15 million board feet per fiscal year would be exempt from the payment of assessments. Additionally, no entity would pay assessments on the first 15 million board feet of softwood lumber shipped domestically or imported during the year. Exports from the United States would also be exempt from assessments. The purpose of the program would be to strengthen the position of softwood lumber in the marketplace, maintain and expand markets for softwood lumber, and develop new uses for softwood lumber within the United States.
A referendum would be held among eligible domestic manufacturers and importers to determine whether they favor implementation of the program prior to it going into effect. The proposal was submitted to USDA by the Blue Ribbon Commission (BRC), a committee of 21 chief executive officers and heads of businesses that domestically manufacture and import softwood lumber. This rule also announces AMS's intent to request approval by the OMB of new information collection requirements to implement the program.
Authority in 1996 Act
The proposed Order is authorized under the 1996 Act which authorizes USDA to establish agricultural commodity research and promotion orders which may include a combination of promotion, research, industry information, and consumer information activities funded by mandatory assessments. These programs Start Printed Page 61003are designed to maintain and expand markets and uses for agricultural commodities. As defined under section 513(1)(D) of the 1996 Act, agricultural commodities include the products of forestry, which includes softwood lumber.
The 1996 Act provides for a number of optional provisions that allow the tailoring of orders for different commodities. Section 516 of the 1996 Act provides permissive terms for orders, and other sections provide for alternatives. For example, section 514 of the 1996 Act provides for orders applicable to (1) producers, (2) first handlers and others in the marketing chain as appropriate, and (3) importers (if imports are subject to assessments). Section 516 states that an order may include an exemption of de minimis quantities of an agricultural commodity; different payment and reporting schedules; coverage of research, promotion, and information activities to expand, improve, or make more efficient the marketing or use of an agricultural commodity in both domestic and foreign markets; provision for reserve funds; provision for credits for generic and branded activities; and assessment of imports.
In addition, section 518 of the 1996 Act provides for referenda to ascertain approval of an order to be conducted either prior to its going into effect or within three years after assessments first begin under the order. An order also may provide for its approval in a referendum based upon different voting patterns. Section 515 provides for establishment of a board or council from among producers, first handlers and others in the marketing chain as appropriate, and importers, if imports are subject to assessment.
Industry Background
The softwood lumber industry is comprised of sawmills that make products from softwood trees. Softwoods include the botanical group of trees that have needle-like or scale-like leaves, or conifers. Softwood lumber includes certain products manufactured from softwoods (or coniferous trees). Softwood lumber is used in products like flooring, siding, and framing.
Softwood lumber sizes are identified by the thickness and width of the board when it is first cut from the log. This is known as “rough cut” when the wood is still green and wet. Once the wood dries, it shrinks. After the wood dries, the surface of the board is smoothed to make the wood a uniform size. This is known as “planing” the wood. Once planed, the wood is considered finished. In the industry, the term nominal is used to describe the size of the rough cut board, prior to finishing. For example, a 2 x 4 board is a nominal size. The actual size of a 2 x 4 board is 1.5 inches in thickness by 3.5 inches in width. The length of the board is typically the actual length. Usually there is a 1/2 inch difference in measurements over 2 inches and 1/4 inch difference in measurements less than 2 inches. For purposes of the proposed Order and the tables in this rule, nominal sizes are used. One nominal board foot is a unit of measurement of softwood lumber represented by a board 12-inches long, 12-inches wide, and 1-inch thick or its cubic equivalent. A board foot calculation for softwood lumber 1 inch or more in thickness is based on its nominal thickness and width by the actual length. Softwood lumber with a nominal thickness of less than 1 inch is calculated as 1 inch.
Regional U.S. Timber Production [1]
According to USDA's Forest Service, the main species of softwoods in the southern United States are pines that grow fast and can be sold for lumber in 25 to 30 years. Southern pines are often treated with preservatives. About a third of the region's lumber is sold to treaters for further processing (i.e., apply preservatives).[2]
Most of the northern U.S. softwood lumber industry is in Maine where the predominant species are white spruce and balsam fir. These trees are typically used for light framing such as wall studs. Second growths of red pine planted in the 1930s and later have been harvested by a few firms in the lake States. Red pine is also easy to treat and much of it is processed. White pine trees are also prevalent in the northern United States. They are used for paneling, millwork, and joinery. Millwork includes woodwork that has been made at a mill, and joinery is the trade of constructing articles by joining together pieces of wood.
The bulk of timber production in the western United States is on the coast of the Pacific Northwest. Douglas fir and hemlock trees dominate while farther south in northern California, redwood trees, suitable for outdoor structures like fences, siding and decks, are common. East of these regions, ponderosa pine dominates and is used for millwork and joinery. Northern Idaho and Montana contain lodgepole pine and other species suitable for light framing.
U.S. Softwood Lumber Output by Region [3]
According to USDA's Forest Service, for 2007-2008, total output (production) of softwood lumber by U.S. sawmills averaged about 29.5 billion board feet annually. Of the 29.5 billion board feet, 12.6 billion board feet were from the U.S. South, 14.4 billion board feet were from the U.S. West, and 2.5 billion board feet were from the Northeast and Lake States. Data for the western States is from the Western Wood Products Association [4] and data for the other two regions is from the U.S. Census Bureau.[5]
Softwood Lumber Markets [6]
The residential market is the largest consumer of softwood lumber in the United States. This includes single and multifamily homes, mobile homes, and remodeling. The residential market accounted for 75 percent of the total U.S. softwood lumber market in 2006 and 63 percent of the market in 2009. Table 1 below shows this data from 2003 through 2009.
Table 1—U.S. Softwood Lumber Markets From 2003-2009 Volume
[Billion board feet]
Single family homes Multi-family homes Mobile homes Residential remodeling Non-residential, buildings Non-residential, other Industrial and other Total U.S. 2003 20.2 1.7 1.1 19.3 3.6 0.6 10.2 56.7 2004 22.2 1.8 1.1 20.3 3.9 0.5 11.1 60.8 Start Printed Page 61004 2005 24.5 1.9 1.2 20.9 3.8 0.6 11.7 64.6 2006 21.3 1.9 0.9 21.4 3.6 0.6 11.3 61.0 2007 14.9 1.7 0.8 19.7 4.0 0.6 11.4 53.1 2008 8.4 1.4 0.6 17.5 3.9 0.6 9.6 42.0 2009 5.3 0.7 0.4 14.2 3.6 0.6 7.8 32.6 Shares (percent) 2003 36 3 2 34 6 1 18 2004 36 3 2 33 6 1 18 2005 38 3 2 32 6 1 18 2006 35 3 2 35 6 1 18 2007 28 3 1 37 8 1 21 2008 20 3 1 42 9 1 23 2009 16 2 1 44 11 2 24 During normal economic conditions, single family homes comprise the largest share of the softwood lumber market in the United States. Single family home use rose from 20.2 billion board feet in 2003 to 24.5 billion board feet in 2005 and fell to 5.3 billion board feet in 2009. Single family homes comprised 38 percent of the market for softwood lumber in 2005 and 16 percent of the market by 2009.
Home building is cyclical in nature (follows a pattern of highs and lows) as compared to other end uses for softwood lumber. Residential remodeling and other uses experienced downturns between 2006 and 2009, but less severe than the market for single family homes. Softwood lumber used for residential remodeling fell from 21.4 billion board feet in 2006 to 14.2 billion board feet in 2009. As a percentage of softwood lumber market share, residential remodeling rose from 35 percent in 2006 to 44 percent in 2009.
Export Markets [7]
Export markets are another outlet for softwood lumber. Two decades ago, U.S. exports were about seven times greater than they were in recent years, but a strong U.S. dollar from the mid-1990s onward helped to reduce exports. Additionally, different size and grade standards for softwood lumber in export markets complicate production when log sizes have to be converted from imperial units (feet) to metric (meters). Most manufacturers have thus focused on North American sales. However, in slow periods such as in recent years, efforts have been made to supply export markets to the extent possible.
Competition [8]
Softwood lumber competes with several alternative products. Steel and concrete dominate larger residential and nonresidential projects. Brick, concrete, and vinyl are often used in low-rise residential and nonresidential buildings. Within the last decade, wood-plastic composite lumber has become popular for outdoor decking, railing, trim, and fencing. Other wood-based products such as laminated veneer are becoming more popular in place of softwood lumber.
Imports
According to U.S. Department of Commerce, Census Bureau, Foreign Trade Statistics data [9] , imports of softwood lumber from 2007 through 2009 averaged about 13 billion board feet annually. During those years, imports from Canada averaged 12 billion board feet annually, comprising about 92 percent of total imports; imports from western Europe averaged 434 million board feet annually, comprising about 3 percent of total imports; and imports from Chile averaged 255 million board feet annually, comprising about 2 percent of total imports. Imports from other countries accounted for the remaining 3 percent of total imports for 2007 through 2009.
Price and Cost Trends [10]
Prices in the lumber industry can change rapidly in response to shifts in demand or supply. Prices are set competitively, with many buyers and sellers bidding in a business that tends to be cyclical in nature. As shown in Table 2 below, revenue for the State of Oregon per thousand board feet was about $309 in 2003, rose to $420 in 2004, and fell to $219 in 2008. In comparison, revenue for the State of Georgia per thousand board feet was about $323 in 2003, rose to $418 in 2005, and fell to $262 in 2008.
Table 2—Typical Sawmill Operating Costs 2003-2008
Oregon Georgia Costs ($ per thousand board feet) Revenue ($ per thousand board feet) Costs ($ per thousand board feet) Revenue ($ per thousand board feet) 2003 295 309 311 323 2004 330 420 335 378 2005 349 370 349 418 2006 335 316 349 330 Start Printed Page 61005 2007 297 260 300 269 2008 238 219 328 262 Several factors contributed to the revenue changes shown in Table 2. Some mills in the interior western United States were forced to close because of constraints on the availability of timber. A dispute with Canada over lumber imports that resulted in a 15 percent export levy for some U.S.-bound shipments and quotas on others after October 2006 impacted supply.
Wood, labor, and operating costs also impact revenue. The cost of wood in the United States is negotiated between buyers and sellers. Companies often enter into long-term supply contracts with timber owners where the price is negotiated quarterly based on sales and market conditions. Labor is the second biggest component of lumber costs. According to the U.S. Department of Labor, U.S. wages have increased about 3 percent per year during this decade.[11] At the same time, labor productivity in sawmilling has increased by a like amount leaving unit labor costs flat. The other main cost for sawmills is energy, but most mills use their own residues to generate heat for their drying needs. This has lessened the impact of rising energy prices on sawmills. As shown in Table 2, total operating costs in Oregon per thousand board feet averaged $295 in 2003, rose to $349 in 2005, and fell to $238 in 2008. In comparison, total operating costs in Georgia per thousand board feet averaged $311 in 2003, rose to $349 in 2005 and 2006, and fell to $328 in 2008.
Need for a Program
The softwood lumber industry is experiencing one of the worst markets in history. The collapse of the housing market caused prices to fall from $404 per thousand board feet in 2004 to $222 per thousand board feet in 2009.[12] Competition from other building products like cement and vinyl has also helped to reduce demand for softwood lumber.
Additionally, at the request of the U.S. and Canadian governments, the U.S. Endowment for Forestry and Communities (Endowment) and the Binational Softwood Lumber Council (BSLC) were formed in 2006 in accordance with the 2006 Softwood Lumber Agreement. The Endowment is a non-profit organization that works with public and private sectors to advance the interests of the forestry community. The Endowment conducted a study to assess the feasibility of a softwood lumber research and promotion program. In the past, the industry attempted voluntary efforts to promote forest products, but they were sporadic, underfunded, and narrowly targeted. These campaigns did not last long enough to succeed. The Endowment recommended to the industry that Canadian and U.S. companies pursue a shared vision and achieve broad agreement on creating a unified softwood lumber research and promotion program. In 2008, the Endowment held an industry meeting in Seattle, Washington, to discuss the merits of such a program and obtain industry feedback.
As a result of the Endowment's efforts, the BRC was subsequently formed to pursue an industry research and promotion program. The BRC is comprised of 21 members representing the United States and Canada. Funding and support for the BRC's efforts come from the BSLC, a non-profit organization whose mission is to promote increased cooperation between the U.S. and Canadian softwood lumber industries and to strengthen and expand markets for softwood lumber products in both countries. The BRC submitted an initial proposal for a program to USDA in February 2010.
The BRC proposed a program that would be financed by an assessment on softwood lumber domestic manufacturers and importers and administered by a board of industry members selected by the Secretary. The initial assessment rate would be $0.35 per thousand board feet shipped within or imported to the United States and could be increased up to a maximum of $0.50 per thousand board feet. Entities that domestically ship or import less than 15 million board feet would be exempt along with shipments exported outside of the United States. Larger entities would not pay assessments on the first 15 million board feet shipped or imported. The purpose of the program would be to strengthen the position of softwood lumber in the marketplace, maintain and expand markets for softwood lumber, and develop new uses for softwood lumber within the United States. A referendum would be held among eligible domestic manufacturers and importers to determine whether they favor implementation of the program prior to it going into effect. A majority of domestic manufacturers and importers by both number and volume represented in the referendum would have to support the program for it to be implemented. The specific provisions of the program are discussed below.
Provisions of Proposed Program
Definitions
Pursuant to section 513 of the 1996 Act, §§ 1217.1 through 1217.30 of the proposed Order define certain terms that would be used throughout the Order. Several of the terms are common to all research and promotion programs authorized under the 1996 Act while other terms are specific to the proposed softwood lumber Order.
Section 1217.1 would define the term “Act” to mean the Commodity Promotion, Research, and Information Act of 1996 (7 U.S.C. 7411-7425), and any amendments thereto.
Section 1217.2 would define the term “Blue Ribbon Commission” to mean the 21-member committee representing businesses that manufacture softwood lumber in the United States or import softwood lumber to the United States formed to pursue an industry research, promotion, and information program. As specified in proposed § 1217.41, the BRC would conduct the initial nominations for the Softwood Lumber Board and submit them to the Secretary. This would be the only role of the BRC under the program.Start Printed Page 61006
Section 1217.3 would define the term “Board” or “Softwood Lumber Board” to mean the administrative body established pursuant to § 1217.40, or such other name as recommended by the Board and approved by the Secretary.
Section 1217.4 would define the term “board foot” or “BF” to mean a unit of measurement of softwood lumber represented by a board 12-inches long, 12-inches wide, and 1-inch thick or its cubic equivalent. A board foot calculation for softwood lumber 1 inch or more in thickness is based on its nominal thickness and width by the actual length. Softwood lumber with a nominal thickness of less than 1 inch is calculated as 1 inch.
The term “nominal” means the size by which softwood lumber is known and sold in the marketplace. As previously mentioned, it differs from the actual size and is based on the thickness and width of a board when it is first cut from a log, or rough cut, prior to drying and planing. Nominal size would be defined in § 1217.16 of the Order. The term “planing” means the act of smoothing the surface of a board to make the wood a uniform size and would be defined in § 1217.20 of the Order.
Section 1217.6 would define the term “Customs” to mean the United States Customs and Border Protection or U.S. Customs Service, an agency of the United States Department of Homeland Security.
Section 1217.8 would define the term “domestic manufacturer” to mean any person who is a first handler and is engaged in the manufacturing, sale and shipment of softwood lumber in the United States during a fiscal period and who owns, or shares the ownership and risk of loss of manufacturing of softwood lumber or a person who is engaged in the business of manufacturing, or causes to be manufactured, sold and shipped such softwood lumber in the United States beyond personal use. The term would not include any person who re-manufactures softwood lumber that had already been subject to assessment under the Order.
Section 1217.9 would define the term “export” to mean to manufacture and ship softwood lumber from within the United States to locations outside of the United States.
Section 1217.10 would define the term “fiscal period” or “fiscal year” to mean a calendar year from January 1 through December 31, or other period as recommended by the Board and approved by the Secretary.
Section 1217.12 would define the term “information” to mean activities or programs designed to disseminate the results of research, new and existing marketing programs, new and existing marketing strategies, new and existing uses and applications, and to enhance the image of softwood lumber and the forests from which it comes. This would include consumer education, which would mean any action taken to provide information to, and broaden the understanding of, the general public regarding softwood lumber. This would also include industry information, which would mean information and programs that would enhance the image of the softwood lumber industry.
Section 1217.13 would define the term “manufacture” to mean the process of transforming softwood logs into softwood lumber.
Section 1217.14 would define the term “manufacturer for the U.S. market” to mean domestic manufacturers and importers of softwood lumber. Such importers may not have manufactured the softwood lumber, but would be importing softwood lumber that had been manufactured from softwood logs. The term is intended to facilitate equity between the domestic and importing members of the softwood lumber industry.
Section 1217.15 would define the term “marketing” to mean the sale or other disposition of softwood lumber in interstate, foreign, or intrastate commerce. The sale or disposition of softwood lumber within a State would constitute marketing.
Section 1217.18 would define the terms “part” and “subpart.” The term “part” would mean the Softwood Lumber Research, Promotion, Consumer Education, and Industry Information Order and all rules, regulations, and supplemental orders issued pursuant to the Act and the Order. The Order would be a “subpart” of the part.
Section 1217.21 would define the terms programs, plans and projects to mean research, promotion and information programs, plans, or projects established under the Order.
Section 1217.22 would define the term “promotion” to mean any action taken, including paid advertising, public relations and other communications, and promoting the results of research, that presents a favorable image of softwood lumber and the forests from which it comes to the public and to any and all consumers and those who influence consumption of softwood lumber with the intent of improving the perception, markets and competitive position of softwood lumber and stimulating sales of softwood lumber.
Section 1217.23 would define the term “research” to mean any activity that advances the position of softwood lumber in the marketplace that includes any type of test, study, or analysis designed to advance the image, desirability, use, marketability, sales, product development, or quality of softwood lumber; new applications; improving softwood lumber's position in building and fire codes; softwood lumber product testing and safety; and evaluating the effectiveness of market development and promotion efforts including life cycle studies, forestry, sustainable forest management, environmental preferability, competitiveness, efficiency, pest and disease control, water quality and other management aspects of forestry and the forests from which softwood lumber originates.
Section 1217.25 would define the term “softwood lumber” to mean all softwood lumber and softwood lumber products described in section 804(a) within Title VIII (Softwood Lumber Act of 2008 or SLA of 2008) of the Tariff Act of 1930 (19 U.S.C. 1202-1683g), as amended by section 3301 of the Food, Conservation and Energy Act of 2008 (Pub. L. 110-246, enacted June 18, 2008). An interim final rule issued by Customs and effective on September 18, 2008 (73 FR 49934; August 25, 2008), prescribed an importer declaration program and entry requirements applicable to such softwood lumber and softwood lumber products. The declaration program and entry requirements were required under section 803 of the SLA of 2008. Section 804 of the SLA of 2008 sets forth the scope of softwood lumber and softwood lumber products covered by that Act. Accordingly, all softwood lumber and softwood lumber products classified under subheading 4407.10.00, 4409.10.10, 4409.10.20, or 4409.10.90 of the Harmonized Tariff Schedule of the United States (HTSUS) are subject to the importer declaration program and entry requirements and would be covered under this Order and are described in the following paragraphs: [13]
(1) Coniferous wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or finger-jointed, of a thickness exceeding 6 millimeters;
(2) Coniferous wood siding (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded, or the like) along any of its edges or faces, Start Printed Page 61007whether or not planed, sanded, or finger-jointed;
(3) Other coniferous wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded, or the like) along any of its edges or faces (other than wood moldings and wood dowel rods) whether or not planed, sanded, or finger-jointed;
(4) Coniferous wood flooring (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rabbeted, chamfered, v-jointed, beaded, molded, rounded, or the like) along any of its edges or faces, whether or not planed, sanded, or finger jointed; and
(5) Coniferous drilled and notched lumber and angle cut lumber.
In addition, any product classified under subheading 4409.10.05 of the HTSUS that is continually shaped along its end and or side edges, and unless excepted or excluded from the importer declaration requirement, softwood lumber products that are stringers, radius cut box-spring frame components, fence pickets, truss components, pallet components, and door and window frame parts classified under subheading 4418.90.46.95, 4421.90.70.40, or 4421.90.97.40 of the HTSUS are covered under the SLA of 2008 and would be covered under the Order.
The following are not subject to the importer declaration program under section 803 of the SLA of 2008 (see section 804(b)) because they are defined as excluded from the program and would thus not be covered under this Order:
(1) Trusses and truss kits, properly classified under subheading 4418.90 of the HTSUS;
(2) I-Joist beams;
(3) Assembled box-spring frames;
(4) Pallets and pallet kits, properly classified under subheading 4415.20 of the HTSUS;
(5) Garage doors;
(6) Edge-glued wood, properly classified under subheading 4421.90.97.40 of the HTSUS;
(7) Complete door frames;
(8) Complete window frames;
(9) Furniture;
(10) Articles brought into the United States temporarily and for which an exemption from duty is claimed under subchapter XIII of chapter 98 of the HTSUS; and
(11) Household and personal effects.
Also, the following products are not subject to the importer declaration program established under section 803 of the SLA of 2008 (see section 804(c)) because they are defined as excepted from the program:
(1) Stringers (pallet components used for runners), if the stringers have at least two notches on the side, positioned at equal distance from the center, to properly accommodate forklift blades, and properly classified under subheading 4421.90.97.40 of the HTSUS;
(2) Box-spring frame kits, if the kits contain two wooden side rails, two wooden end (or top) rails; and varying numbers of wooden slats; and the side rails and the end rails are radius-cut at both ends. Box spring frame kits must be individually packaged, and contain the exact number of wooden components needed to make the box-spring frame described on the entry documents, with no further processing required. None of the components contained in the package may exceed 1 inch in actual thickness or 83 inches in length.
(3) Radius-cut box-spring-frame components, not exceeding 1 inch in actual thickness or 83 inches in length, ready for assembly without further processing, if radius cuts are present on both ends of the boards and are substantial cuts so as to completely round one corner.
(4) Fence pickets requiring no further processing and properly classified under subheading 4421.90.70 of the HTSUS, 1 inch or less in actual thickness, up to 8 inches wide, and 6 feet or less in length, and having finials or decorative cuttings that clearly identify them as fence pickets (in the case of dog-eared fence pickets, the corners of the boards should be cut off so as to remove pieces of wood in the shape of isosceles right angle triangles with sides measuring 3/4 of an inch or more).
(5) Softwood lumber originating in the United States that is exported to another country for minor processing and imported into the United States if the processing occurring in another country is limited to kiln drying, planing to create smooth-to-size board, and sanding; and the importer establishes to Customs' satisfaction upon entry that the softwood lumber originated in the United States.
(6) Any softwood lumber or softwood lumber product that originated in the United States, if the importer, exporter, foreign manufacturer or original domestic manufacturer establishes to Customs' satisfaction upon entry that the softwood lumber entered and documented as originating in the United States was first manufactured in the United States.
(7) Softwood lumber or softwood lumber products contained in a single family home package or kit, regardless of classification under the HTSUS, if the importer declares that the following requirements have been met: (i) The package or kit constitutes a full package of the number of wooden pieces specified in the plan, design or blueprint necessary to produce a home of at least 700 square feet produced to a specified plan, design or blueprint; (ii) The package or kit contains all necessary internal and external doors and windows, nails, screws, glue, subfloor, sheathing, beams, posts, and connectors, and if included in the purchase contract, the decking, trim, drywall and roof shingles specified in the plan, design or blueprint; (iii) Prior to importation, the package or kit is sold to a United States retailer that sells complete home packages or kits pursuant to a valid purchase contract referencing the particular home design plan or blueprint, and the contract is signed by a customer not affiliated with the importer; and (iv) Softwood lumber products entered as part of the package or kit, whether in a single entry or multiple entries on multiple days, and are to be used solely for the construction of the single family home specified by the home design plan, or blueprint matching the Customs import entry.
For each entry of softwood lumber products contained in a single family home package for which the importer declares that these four requirements are met, the importer must retain and make available to Customs upon request the following documentation:
(1) A copy of the appropriate home design plan, or blueprint matching the Customs entry in the United States;
(2) A purchase contract from a retailer of home kits or packages signed by a customer not affiliated with the importer;
(3) A listing of all parts in the package or kit being entered into the United States that conforms to the home design package being imported; and
(4) If a single contract involves multiple entries, an identification of all of the items required to be listed under item (3) that are included in each individual shipment.
The reporting and recordkeeping burden for the information required by Customs has been approved by the OMB and is addressed in the referenced Custom's interim final rule.
Section 1217.26 would define the term “softwood” to mean one of the botanical groups of trees that have needle-like or scale-like leaves, or conifers.Start Printed Page 61008
Sections 1217.5, 1217.7, 1217.11, 1217.17, 1217.19, 1217.24, 1217.27, 1217.28, 1217.29, and 1217.30 would define the terms “conflict of interest,” “Department or UDSA,” “importer,” “Order,” “person,” “Secretary,” “State,” “suspend,” “terminate,” and “United States,” respectively. The definitions are the same as those specified in section 513 of the Act.
Establishment of the Board
Pursuant to section 515 of the 1996 Act, §§ 1217.40 through 1217.47 of the proposed Order would detail the establishment and membership of the proposed Softwood Lumber Board, nominations and appointments, the term of office, removal and vacancies, procedure, reimbursement and attendance, powers and duties, and prohibited activities.
Section 1217.40 would specify the Board establishment and membership. The Board would be composed of manufacturers for the U.S. market who manufacture and domestically ship or import 15 million board feet or more of softwood lumber in the United States during a fiscal period. Seats on the Board would be apportioned based on the volume of softwood lumber manufactured and shipped within the United States by domestic manufacturers and the volume of softwood lumber imported into the United States.
The Board would be composed of 18 or 19 members, depending upon whether an additional importer member was appointed to the Board. Twelve members would be domestic manufacturers and would be allocated to three regions in the United States based on the volume of softwood lumber manufactured in and shipped from the respective region. Of the 12 members, 6 would be from the U.S. South Region, 5 would be from the U.S. West Region, and 1 member would be from the Northeast and Lake States Region and any other part of the United States not included in the southern and western regions. Specific areas within each domestic region would be specified in § 1217.40(b)(1) of the proposed Order.
Six members would be importers who import the majority of their softwood lumber from two regions in Canada and would be allocated based on the volume of softwood lumber imported from those two respective regions. Of the six Canadian importers, four would represent the Canadian West Region and two would represent the Canadian East Region. Specific areas within each Canadian region would be specified in § 1217.40(b)(2) of the proposed Order. Any additional 19th member would represent a region representing all countries except Canada.
The volume of softwood lumber imported from other countries besides Canada is relatively low, averaging about 8 percent of total imports from 2007 through 2009. However, all entities paying assessments to the Board would have the opportunity to be represented on the Board. Thus, the BRC recommended that, if the Secretary, at the request of the Board or on his or her own, determines that it would be consistent with the provisions of the Act, the Secretary could appoint an additional importer to the Board to represent the region outside of the regions specified for Canada. Nominees would be solicited as prescribed for other regions, and all the names of eligible candidates would be submitted to the Secretary for consideration. Such nominees would have to certify that the majority of their softwood lumber is imported from the region (which would include imports from all countries except Canada).
The BRC also opted to have no alternate Board members. It wants to ensure that industry members who seek representation and serve on the Board are committed to their service and participate in all Board meetings.
Every 5 years, but no more often than once every 3 years, the Board must review, based on a 3-year average, the geographical distribution of the volume of softwood lumber manufactured and shipped within the United States by domestic manufacturers and the volume of softwood lumber imported into the United States. If warranted, the Board would recommend to the Secretary that the Board membership be reapportioned appropriately to reflect such changes. The distribution of volumes between regions also shall be considered. Any changes in Board composition would be implemented by the Secretary through rulemaking.
Section 1217.41 of the proposed Order would specify Board nominations and appointments. The initial nominations would be submitted to the Secretary by the BRC. The BRC would publicize the nomination process, using trade press or other means it deems appropriate, and outreach to all manufacturers for the U.S. market who domestically ship and/or import 15 million board feet or more of softwood lumber per fiscal year. The BRC would use regional caucuses, mail or other methods to solicit potential nominees and would work with USDA to help ensure that all interested persons are apprised of the nomination process. The BRC would submit the nominations to the Secretary and recommend two nominees for each Board position. The Secretary would select the members of the Board from the nominations submitted by the BRC.
Regarding subsequent nominations, the Board would solicit nominations as described in the preceding paragraph. Nominees would have the opportunity to provide the Board a short background statement outlining their qualifications and desire to serve on the Board. They must domestically ship and/or import 15 million board feet or more of softwood lumber per fiscal year. Entities that are both a domestic manufacturer and an importer could seek nomination to the Board and vote in the nomination process described below as either a domestic manufacturer or an importer, but not both. Such nominees who domestically manufacture the majority of their softwood lumber could seek nomination and vote as a domestic manufacturer, and such nominees who import the majority of their softwood lumber could seek nomination and vote as an importer.
Domestic manufacturers who manufacture softwood lumber in more than one region could seek nomination in only the region in which they manufacture the majority of their softwood lumber. The names of domestic manufacturer nominees would be placed on a ballot by region. The ballots along with the background statements would be mailed to domestic manufacturers in each respective region for a vote. Domestic manufacturers who manufacture softwood lumber in more than one region could only vote in the region in which they manufacture the majority of their softwood lumber. The votes would be tabulated for each region with the nominee receiving the highest number of votes at the top of the list in descending order by vote. The top two candidates for each position would be submitted to the Secretary.
Importer nominees would certify that the majority of their softwood lumber was imported from the respective region for which they were seeking representation on the Board. They would provide documentation to verify this if requested by the Board. The names of importer nominees would then be placed on a ballot by region. The ballots along with the background statements would be mailed to importers in each respective region for a vote. Importers who import softwood lumber from more than one region could only vote in the region from which they import the majority of their softwood lumber. The votes would be tabulated for each region with the nominee receiving the highest number of votes at Start Printed Page 61009the top of the list in descending order by vote. The top two candidates for each position would then be submitted to the Secretary.
The Board would submit nominations to the Secretary at least 6 months before the new Board term begins. The Secretary would select the members of the Board from the nominations submitted by the Board.
The BRC also recommended that no two Board members be employed by a single corporation, company, partnership, or any other legal entity. This is to ensure that no one entity has control on the Board.
In order to provide the Board flexibility, the Board could recommend to the Secretary modifications to its nomination procedures. Any such modifications would be implemented through rulemaking by the Secretary.
Section 1217.42 of the proposed Order would specify the term of office. With the exception of the initial Board, each Board member would serve a three-year term or until the Secretary selected his or her successor. Each term of office would begin on January 1 and end on December 31. No member could serve more than two consecutive terms, excluding any term of office less than three years. For the initial board, the terms of Board members would be staggered for two, three, and four years and would be recommended to the Secretary by the BRC.
Section 1217.43 of the proposed Order would specify criteria for the removal of members and for filling vacancies. If a Board member ceased to work for or be affiliated with a domestic manufacturer or importer or ceased to do business in the region he or she represented, such position would become vacant. Additionally, the Board could recommend to the Secretary that a member be removed from office if the member consistently refused to perform his or her duties or engaged in dishonest acts or willful misconduct. The Secretary could remove the member if he or she finds that the Board's recommendation shows adequate cause. If a position became vacant, nominations to fill the vacancy would be conducted using the nominations process as proposed in § 1217.41 of the Order. A vacancy would not be required to be filled if the unexpired term is less than six months.
Section 1217.44 of the proposed Order would specify procedures of the Board. A majority of the Board members (10) would constitute a quorum, provided that at least three of the members present were importers and six were domestic manufacturers. If participation by telephone or other means were permitted, members participating by such means would count towards the quorum requirements or other voting requirements as authorized under the Order. Proxy voting would not be permitted. A motion would carry if supported by 10 Board members, except for recommendations to change the assessment rate or to adopt a budget, both of which would require affirmation by at least two-thirds of the Board members (12 members for an 18 member Board and 13 members for a 19 member Board). If a Board has vacant positions, recommendations to change the assessment rate or to adopt a budget would have to pass by an affirmative vote of two-thirds of the Board members, exclusive of the vacant seats.
For example, if a 19 member Board had a vacancy, there would be 18 Board members. If the Board held a meeting, and 9 members were present (of which 6 were domestic manufacturers) in person and 4 (of which 3 were importers) participated by telephone, there would be a quorum (13) for the meeting. If the Board were voting on the upcoming year's budget, 12 members (.66 × 18 members) would have to vote in favor of the budget for it to pass.
The proposed Order would also provide for the Board to take action by mail, telephone, electronic mail, facsimile, or any other electronic means when the chairperson believes it is necessary. Actions taken under these procedures would be valid only if all members and the Secretary were notified of the meeting and all members were provided the opportunity to vote and at least 10 Board members voted in favor of the action (unless two-thirds vote were required under the Order). Additionally, all votes would have to be confirmed in writing and recorded in Board minutes.
The proposed Order would specify that Board members would serve without compensation. However, Board members would be reimbursed for reasonable travel expenses, as approved by the Board, incurred when performing Board business.
Section 1217.46 of the proposed Order would specify powers and duties of the Board. These are similar in promotion programs authorized under the 1996 Act. They include, among other things, to administer the Order and collect assessments; to develop bylaws and recommend regulations necessary to administer the Order; to select a chairperson and other Board officers; to create an executive committee and form other committees and subcommittees as necessary; to hire staff or contractors; to provide appropriate notice of meetings to the industry and USDA and keep minutes of such meetings; to develop programs and enter into contracts to implement programs; to submit a budget to USDA for approval 60 calendar days prior to the start of the fiscal year; to borrow funds necessary to cover startup costs of the Order; to invest Board funds appropriately; to recommend changes in the assessment rate as appropriate and within the limits of the Order; to have its books audited by an outside certified public accountant at the end of each fiscal period and at other times as requested by the Secretary; to report its activities to manufacturers for the U.S. market; to make public an accounting of funds received and expended; to receive, investigate and report to the Secretary complaints of violations of the Order; and to recommend amendments to the Order as appropriate.
Section 1217.47 of the proposed Order would specify prohibited activities that are common to all promotion programs authorized under the 1996 Act. In summary, the Board nor its employees and agents could engage in actions that would be a conflict of interest; use Board funds to lobby (influencing legislation or governmental action or policy, by local, State, national, and foreign governments or subdivision thereof, other than recommending to the Secretary amendments to the Order); and engage in any advertising or activities that may be false, misleading or disparaging to another agricultural commodity.
Expenses and Assessments
Pursuant to sections 516 and 517 of the 1996 Act, §§ 1217.50 through 1217.53 of the proposed Order detail requirements regarding the Board's budget and expenses, financial statements, assessments, and exemption from assessments. At least 60 calendar days before the start of the fiscal period, and as necessary during the year, the Board would submit a budget to USDA covering its projected expenses. The budget must include a summary of anticipated revenue and expenses for each program along with a breakdown of staff and administrative expenses. Except for the initial budget, the Board's budgets should include comparative data for at least one preceding fiscal period.
Each budget must provide for adequate funds to cover the Board's anticipated expenses. Any amendment or addition to an approved budget must be approved by USDA, including shifting of funds from one program, plan or project to another. Shifts of funds that do not result in an increase in the Start Printed Page 61010Board's approved budget would not have to have prior approval from USDA. For example, if the Board's approved budget provided for $1 million in consumer advertising and $500,000 in research projects, a shift of $50,000 from consumer advertising to research would require USDA approval. However, a shift within the $1 million consumer advertising line item would not require prior USDA approval.
The Board would be authorized to incur reasonable expenses for its maintenance and functioning. During its first year of operation, the Board could borrow funds for startup costs and capital outlay. Any borrowed funds would be subject to the same fiscal, budget and audit controls as other funds of the Board.
The Board could also accept voluntary contributions. Any contributions received by the Board would be free from encumbrances by the donor and the Board would retain control over use of the funds. For example, the Board could receive Federal grant funds, subject to approval by the Secretary, for a specific research project. The Board would also be required to reimburse USDA for costs incurred by USDA in overseeing the Order's operations, including all costs associated with referenda.
The Board would be limited to spending no more than 8 percent of its available funds for administration, maintenance, and the functioning of the Board. This limitation would begin two fiscal years after the Board's first meeting. Reimbursements to USDA would not be considered administrative costs. As an example, if the Board received $15 million in assessments during fiscal year 5, and had available $1 million in reserve funds, the Board's available funds would be $16 million. In this scenario, the Board would be limited to spending no more than $1.28 million (.08 × $16 million) on administrative costs. While section 515 of the 1996 Act limits such spending to 15 percent of a board's budget, the BRC believes that 8 percent is appropriate.
The Board could also maintain a monetary reserve and carry over excess funds from one fiscal period to the next. However, such reserve funds could not exceed one fiscal year's budgeted expenses. For example, if the Board's budgeted expenses for a fiscal year were $15 million, it could carry over no more than $15 million in reserve. With approval of the Secretary, reserve funds could be used to pay expenses.
The Board could invest its revenue collected under the Order in the following: (1) Obligations of the United States or any agency of the United States; (2) general obligations of any State or any political subdivision of a State; (3) interest bearing accounts or certificates of deposit of financial institutions that are members of the Federal Reserve; and (4) obligations fully guaranteed as to principal interest by the United States.
The Board would be required to submit to USDA financial statements on a quarterly basis, or at any other time as requested by the Secretary. Financial statements should include, at a minimum, a balance sheet, an income statement, and an expense budget.
Assessments
The Board's programs and expenses would be funded through assessments on manufacturers for the U.S. market, other income, and other funds available to the Board. The Order would provide for an initial assessment rate of $0.35 per thousand board feet. Domestic manufacturers would pay assessments based on the volume of softwood lumber shipped within the United States and importers would pay assessments based on the volume of softwood lumber imported to the United States.
Two years after the Order becomes effective and periodically thereafter, the Board would review the assessment rate and, if appropriate, recommend a change in the rate. At least two-thirds of the Board members would have to favor a change in the assessment rate. The assessment rate could be no less than $0.35 per thousand board feet and no more than $0.50 per thousand board feet. Any change in the assessment rate within this range would be subject to rulemaking by the Secretary. Anticipated income generated within the assessment range is addressed in the section titled Initial Regulatory Flexibility Act Analysis.
Domestic manufacturers would be required to pay their assessments owed to the Board by the 30th calendar day of the month following the end of the quarter in which the softwood lumber was shipped. Thus, the January to December fiscal year would have four quarters ending the last day of March, June, September, and December, respectively. Assessments would be due April 30th, July 30th, October 30th, and January 30th. As an example, assessments for lumber shipped in January would be due to the Board by April 30th.
Importer assessments would be collected through Customs. If Customs did not collect the assessment from an importer, then the importer would be responsible for paying the assessment directly to the Board within 30 calendar days after importation.
Most of the imported softwood lumber that would be covered under the program would have a quantity associated with it in cubic meters. To compute the assessments owed, the quantity of softwood lumber in cubic meters would have to be converted to thousand board feet, and then that number would be multiplied by the applicable assessment rate. One cubic meter is equal to 423.776001 board feet. The factor used to convert one cubic meter to one thousand board feet is 423.776001 divided by 1,000, or 0.423776001. For example, if 500,000 cubic meters of softwood lumber covered under the program is imported, and the assessment rate is $0.35 per thousand board feet, the assessments owed would be $74,160.80 (500,000 × 0.423776001 × $.35).
Some imported lumber covered under the program may not have a quantity associated with it. It would include products like window and door frame parts. The importer declares an export price (or value) for the product, consistent with the SLA of 2008. To compute the assessments owed for such product, the value in dollars must be computed to thousand board feet, and that quantity must be multiplied by the applicable assessment rate. The factor used to convert dollar value to one thousand board feet is 0.0031746, and is based on a 10-year average of $315 per one thousand board feet. For example, if $500,000 worth of softwood lumber is imported under the program, and the assessment rate is $0.35 per thousand board feet, the assessments owed would be $555.54 ($500,000 × 0.0031746 × $.35).
Additionally, under the program, the Board could recommend to the Secretary, upon an affirmative vote of at least two-thirds of the Board members, a change in the factor used to convert value in dollars to one thousand board feet.
The Order would provide authority for the Board to impose a late payment charge and interest for assessments overdue to the Board by 60 calendar days. The late payment charge and rate of interest would be prescribed in the Order's regulations issued by the Secretary.
Exemptions
The Order would provide for four exemptions. First, manufacturers for the U.S. market who domestically ship or import less than 15 million board feet during a fiscal year would be exempt from paying assessments. Domestic manufacturers and importers would Start Printed Page 61011apply to the Board for an exemption prior to the start of the fiscal year. This would be an annual exemption; entities would have to reapply each year. They would have to certify that they expect to domestically ship or import less than 15 million board feet for the applicable fiscal year. The Board could request past shipment or import data to support the exemption request. The Board would then issue, if deemed appropriate, a certificate of exemption to the eligible manufacturer for the U.S. market.
Once approved, domestic manufacturers would not have to pay assessments to the Board for the applicable fiscal year. Approved importers would have their assessments as collected by Customs refunded by the Board within 60 calendar days after receipt of such assessments by the Board. No interest would be paid on the assessments collected by Customs.
Manufacturers for the U.S. market who did not apply to the Board for an exemption and domestically shipped or imported less than 15 million board feet of softwood lumber during the fiscal year would receive a refund from the Board for the applicable assessments within 30 calendar days after the end of the fiscal year. Board staff would determine the assessments paid and refund the domestic manufacturer accordingly. On the other hand, manufacturers for the U.S. market who receive an exemption certificate but domestically ship or import more than 15 million board feet of softwood lumber during the fiscal year would have to pay the Board the applicable assessments owed within 30 calendar days after the end of the fiscal year and submit any necessary reports to the Board.
If an entity is a domestic manufacturer and importer of softwood lumber, such entity's domestic shipments and imports would count towards the 15 million board foot-exemption. For example, if an entity domestically ships 12 million board feet and imports 10 million board feet during a fiscal year, the entity would pay assessments on 7 million board feet of softwood lumber.
The Board could recommend additional procedures to administer the exemption as appropriate. Any procedures would be implemented through rulemaking by the Secretary.
The second exemption under the proposed Order would be for manufacturers for the U.S. market who domestically ship or import more than 15 million board feet of softwood lumber annually. Domestic manufacturers would not pay assessments on their first 15 million board feet of softwood lumber shipped during the applicable fiscal year. Importers would receive a refund from the Board for the applicable assessments collected by Customs no later than 60 calendar days after receipt of such assessments by the Board.
The third exemption under the proposed Order would be for exports, or shipments of softwood lumber by domestic manufacturers to locations outside of the United States. The Board would develop procedures for approval by USDA for refunding assessments that may be inadvertently paid on such shipments and establish any necessary safeguards as appropriate. Safeguard procedures would be implemented by the Secretary through rulemaking. If the Board determined that exports should be assessed, it would make that recommendation to the Secretary. Any such action would be implemented by USDA through rulemaking.
The fourth exemption under the proposed Order would be for organic lumber. A domestic manufacturer who operates under an approved National Organic Program (NOP) (7 CFR part 205) system plan, only manufactures and ships softwood lumber that is eligible to be labeled as 100 percent organic under the NOP and is not a split operation would be exempt from payment of assessments. Likewise, an importer who imports only softwood lumber that is eligible to be labeled as 100 percent organic under the NOP and who does not import any nonorganic softwood lumber would be exempt from the payment of assessments.
Promotion, Research and Information
Pursuant to section 516 of the 1996 Act, §§ 1217.60 through 1217.62 of the proposed Order would detail requirements regarding promotion, research and information programs, plans and projects authorized under the Order. The Board would develop and submit to the Secretary for approval programs, plans and projects regarding promotion, research, education, and other activities, including consumer and industry information and advertising designed to, among other things, build markets for softwood lumber, enhance the image and reputation of softwood lumber and the forests from which it comes, and develop new applications for softwood lumber. The Board would be required to evaluate each plan and program to ensure that it contributes to an effective promotion program. Softwood lumber of all origins would have to be treated equally by the Board, and no program, plan, or project could be false, misleading, or disparage against another agricultural commodity.
The Order would also require that, at least once every five years, the Board fund an independent evaluation of the effectiveness of the Order and programs conducted by the Board. Finally, the Order would specify that any patents, copyrights, trademarks, inventions, product formulations and publications developed through the use of funds received by the Board would be the property of the U.S. Government, as represented by the Board. These along with any rents, royalties and the like from their use would be considered income subject to the same fiscal, budget, and audit controls as other funds of the Board, and could be licensed with approval of the Secretary.
Reports, Books and Records
Pursuant to section 515 of the 1996 Act, §§ 1217.70 through 1217.72 specify the reporting and recordkeeping requirements under the proposed Order as well as requirements regarding confidentiality of information.
Manufacturers for the U.S. market would be required to submit periodically to the Board certain information as the Board may request. Specifically, domestic manufacturers would submit a report to the Board that would include, but not be limited to, the manufacturer's name, address, and telephone number; the board feet of softwood lumber shipped within the United States; the board feet of softwood lumber for which assessments were paid; and the board feet of softwood lumber that was exported. Manufacturers would submit this report at the same time they remit their assessments to the Board. Domestic manufacturers who received a certificate of exemption from the Board would not have to submit such a report to the Board. However, exempt domestic manufacturers who shipped over the exemption threshold of 15 million board feet during the fiscal year would have to submit such reports to the Board with the payment of assessments on a quarterly basis as specified in § 1217.53.
Likewise, importers who pay their assessments directly to the Board would be required to submit a report to the Board that would include, but not be limited to, the importer's name, address, and telephone number; the board feet of softwood lumber imported to the United States; the board feet of softwood lumber for which assessments were paid; and country of export for such softwood lumber. Importers would submit this report at the same time they remit their assessments to the Board. Importers who paid their assessments through Customs would not have to submit such reports to the Board Start Printed Page 61012because Customs would collect this information upon entry.
Additionally, manufacturers for the U.S. market, including those who were exempt, would be required to maintain books and records needed to verify any required reports. Such books and records must be made available during normal business hours for inspection by the Board's or USDA's employees or agents. Manufacturers for the U.S. market would be required to maintain such books and records for two years beyond the applicable fiscal period.
The Order would also require that all information obtained from persons subject the Order as a result of proposed recordkeeping and reporting requirements would be kept confidential by all officers, employees, and agents of the Board and USDA. Such information could only be disclosed if the Secretary considered it relevant, and the information were revealed in a judicial proceeding or administrative hearing brought at the direction or at the request of the Secretary or to which the Secretary or any officer of USDA were a party. Other exceptions for disclosure of confidential information would include the issuance of general statements based on reports or on information relating to a number of persons subject to the Order, if the statements did not identify the information furnished by any person, or the publication, by direction of the Secretary, of the name of any person violating the Order and a statement of the particular provisions of the Order violated.
Miscellaneous Provisions
Referenda
Pursuant to section 518 of the 1996 Act, § 1217.81(a) of the proposed Order specifies that the program would not go into effect unless it is approved by a majority of domestic manufacturers and importers voting in a referendum who also represent a majority of the volume of softwood lumber represented in the referendum who, during a representative period determined by the Secretary, were engaged in the domestic manufacturing or importation of softwood lumber into the United States. For example, if 500 domestic manufacturers and importers representing 100 million board feet of softwood lumber voted in a referendum, 251 domestic manufacturers and importers representing over 50 million board feet would have to vote in favor of the Order for it to pass in the referendum.
Section 1217.81(b) of the proposed Order specifies criteria for subsequent referenda. Under the Order, a referendum would be held to ascertain whether the program should continue, be amended, or be terminated. This section specifies that a referendum would be held 5 years after the Order becomes effective, and every 5 years thereafter, to determine whether domestic manufacturers and importers favor continuation of the Order. The Order would continue if favored by a majority of domestic manufacturers and importers voting in the referendum that also represented a majority of the volume of softwood lumber represented in the referendum.
Additionally, a referendum could be conducted at the request of the Board. A referendum could also be conducted at the request of 10 percent or more of the number of persons eligible to vote in a referendum under the Order. Finally, a referendum could be conducted at any time as determined by the Secretary.
Other Miscellaneous Provisions
Sections 1217.80 and §§ 1217.82 through 1217.88 describe the rights of the Secretary; authorize the Secretary to suspend or terminate the Order when deemed appropriate; prescribe proceedings after termination; address personal liability, separability, and amendments; and provide OMB control numbers. These provisions are common to all research and promotion program authorized under the 1996 Act.
Initial Regulatory Flexibility Act Analysis
In accordance with the Regulatory Flexibility Act (RFA) (5 U.S.C. 601-612), AMS is required to examine the impact of the proposed rule on small entities. Accordingly, AMS has considered the economic impact of this action on small entities.
The purpose of the RFA is to fit regulatory actions to the scale of businesses subject to such actions so that small businesses will not be disproportionately burdened. The Small Business Administration defines, in 13 CFR Part 121, small agricultural producers as those having annual receipts of no more than $750,000 and small agricultural service firms (domestic manufacturers and importers) as those having annual receipts of no more than $7.0 million.
According to USDA's Forest Service, it is estimated that, between 2007 and 2009, there were an average of 595 domestic manufacturers of softwood lumber in the United States annually.[14] This number represents separate business entities; one business entity may include multiple sawmills. Using an average price of $280 per thousand board feet, a domestic manufacturer who ships less than 25 million board feet per year would be considered a small entity. It is estimated that, between 2007 and 2009, about 363 domestic manufacturers, or about 61 percent [15] , shipped less than 25 million board feet annually.
Likewise, according to Customs data, it is estimated that, between 2007 and 2009, there were about 883 importers of softwood lumber annually. About 798 importers, or about 90 percent, imported less than $7.0 million worth of softwood lumber annually. Thus, the majority of domestic manufacturers and importers of softwood lumber would be considered small entities.
Regarding value of the commodity, with domestic production averaging 29.5 billion board feet (2007 and 2008), and using an average price for those years of $268 per thousand board feet [16] , the average annual value for softwood lumber is about $7.9 billion. According to Customs data, the average annual value for softwood lumber imports for 2007 and 2008 is about $4.7 billion.
This rule invites comments on a proposed industry-funded research, promotion, and information program for softwood lumber. Softwood lumber is used in products like flooring, siding and framing. The program would be financed by an assessment on softwood lumber domestic manufacturers and importers and would be administered by a board of industry members selected by the Secretary. The initial assessment rate would be $0.35 per thousand board feet shipped within or imported to the United States and could be increased to $0.50 per thousand board feet. Entities that ship or import less than 15 million board feet would be exempt along with shipments exported outside of the United States. No entity would pay assessments on the first 15 million board feet shipped or imported. The purpose of the program would be to strengthen the position of softwood lumber in the marketplace, maintain and expand markets for softwood lumber, and develop new uses for softwood lumber within the United States. A referendum would be held among eligible domestic manufacturers and importers to determine whether Start Printed Page 61013they favor implementation of the program prior to it going into effect. A majority of entities by both number and volume would have to support the program for it to be implemented. The program is authorized under the 1996 Act.
Regarding the economic impact of the proposed Order on affected entities, softwood lumber domestic manufacturers and importers would be required to pay assessments to the Board. As previously mentioned, the initial assessment rate would be $0.35 per thousand board feet shipped within or imported to the United States and could be increased to no more than $0.50 per thousand board feet.
The Order would provide for an exemption for domestic manufacturers and importers who ship or import less than 15 million board feet annually. Of the 595 domestic manufacturers, it is estimated that about 232, or 39 percent, ship less than 15 million board feet per year and would thus be exempt from paying assessments under the proposed Order. Of the 883 importers, it is estimated that about 780, or 88 percent, import less than 15 million board feet per year and would also be exempt from paying assessments. Thus, about 363 domestic manufacturers and 103 importers would pay assessments under the Order. It is estimated that if $17.5 million were collected in assessments ($0.35 per thousand board feet assessment rate with 50 billion board feet assessed), 25 percent, or about $4 million, would be paid by importers and 75 percent, or about $13 million, would be paid by domestic manufacturers.
Regarding the impact on the industry as a whole, the proposed program is expected to grow markets for softwood lumber by stopping the erosion of market share in single family residential market, increasing the market share in multi-family residential construction, significantly increasing the use of softwood lumber in non-residential markets, and rebuilding softwood lumber's share in the outdoor living market. The BRC estimates the long-term market growth opportunity in the non-residential market and the raised wood segment of the residential market is between 10 and 12 billion board feet. USDA's Forest Service in a 2007 study estimated a more conservative potential growth at around 8 billion board feet.[17] While the benefits of the proposed program are difficult to quantify, the benefits are expected to outweigh the program's costs.
Regarding alternatives, the BRC considered various options to the proposed range in assessment rates and options to the proposed exemption. The BRC believes that $20 million in assessment income is the threshold for an effective program that could help to improve the market for softwood lumber. Table 3 below shows the range in assessments projected at various industry shipment levels per year.
Table 3—Projected Income Generated at Various Assessment Rates and Shipment Levels 1
Assessment options (per thousand board feet) Annual shipment levels (billion board feet) 40 50 60 $0.25 $10 million $12.5 million $15 million $0.35 $14 million $17.5 million $21 million $0.50 $20 million $25 million $30 million 1 Assumes no exemption. Regarding exemption levels, the BRC explored projected assessment income at exemption levels of 15, 20, and 30 million board feet. With a 15 million board foot exemption, the BRC projected a deduction of 11.3 percent in assessment income. Table 4 below shows the BRC's projected income levels at various assessment options in light of the proposed 15 million board foot exemption.
Table 4—Projected Income Generated at Various Assessment Rates and Shipment Levels 1
Assessment options (per thousand board feet) Annual shipment levels (billion board feet) 40 50 60 $0.25 $8.9 million $11.1 million $13.3 million $0.35 $12.4 million $15.5 million $18.9 million $0.50 $17.7 million $22.2 million $26.6 million 1 Assumes 15 million board foot exemption. Ultimately the BRC concluded that an assessment rate range of $0.35 to a maximum of $0.50 per thousand board feet with an exemption threshold of 15 million board feet was appropriate and would generate sufficient income to support an effective promotion program for softwood lumber. At an initial assessment rate of $0.35 per thousand board feet, the BRC projects assessment income between $12.4 million and almost $19 million with shipment levels ranging from 40 to 60 billion board feet, respectively.
The industry explored the merits of a voluntary promotion program. Over the years, the industry organized various public outreach, education and promotion campaigns funded through voluntary assessments. Although some were partially effective, none fully accomplished their objectives and the gains either disappeared quickly or eroded over time once the campaigns were terminated.
This action would impose additional reporting and recordkeeping burden on Start Printed Page 61014domestic manufacturer and importers of softwood lumber. Domestic manufacturers and importers interested in serving on the Board may be asked to submit a nomination form to the Board indicating their desire to serve or nominating another industry member to serve on the Board. Interested persons could also submit a background statement outlining their qualifications to serve on the Board. Except for the initial Board nominations, domestic manufacturers and importers would have the opportunity to cast a ballot and vote for candidates to serve on the Board. Domestic manufacturer and importer nominees to the Board would have to submit a background form to the Secretary to ensure they are qualified to serve on the Board.
Additionally, domestic manufacturers and importers who ship or import less than 15 million board feet annually could submit a request to the Board for an exemption from paying assessments on this volume. Domestic manufacturers and importers would also be asked to submit a report regarding their shipments/imports that would accompany their assessments paid to the Board. Domestic manufacturers and importers who would qualify as 100 percent organic under the NOP could submit a request to the Board for an exemption from assessments. Importers could also request a refund of any assessments paid to Customs.
Finally, domestic manufacturers and importer who wanted to participate in a referendum to vote on whether the Order should become effective would have to complete a ballot for submission to the Secretary. These forms are being submitted to the OMB for approval under OMB Control No. 0581-NEW. Specific burdens for the forms are detailed later in this document in the section titled Paperwork Reduction Act. As with all Federal promotion programs, reports and forms are periodically reviewed to reduce information requirements and duplication by industry and public sector agencies. Finally, USDA has not identified any relevant Federal rules that duplicate, overlap, or conflict with this rule.
AMS is committed to complying with the E-Government Act, to promote the use of the Internet and other information technologies to provide increased opportunities for citizen access to Government information and services, and for other purposes.
Regarding outreach efforts, as previously mentioned, the Endowment conducted a study to assess the feasibility of a softwood lumber research and promotion program. According to the BRC, at the beginning of the study (early 2008), in-depth interviews were conducted among North American softwood lumber industry leaders to explore the level of interest in a generic promotion program to help grow the market for softwood lumber. A sample of 35 companies was selected which was intended to reflect various levels of size and ownership types. Of the 35 companies surveyed, 86 percent by number representing 54 percent of the volume favored exploring a mandatory promotion program for softwood lumber.
In early 2009, the BRC was formed and began a comprehensive process to develop a program. According to the BRC, its membership is diverse and represents 44 percent of softwood lumber shipments within the U.S. market. Efforts were made to inform various associations throughout the country through presentations at their meetings.
While USDA has performed this initial RFA analysis regarding the impact of the proposed rule on small entities, in order to have as much data as possible for a more comprehensive analysis, we invite comments concerning potential effects. USDA is also requesting comments regarding the number and size of entities covered under the proposed Order.
Paperwork Reduction Act
In accordance with the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), AMS announces its intention to request an approval of a new information collection and recordkeeping requirements for the proposed lumber program.
Title: Advisory Committee or Research and Promotion Background Information.
OMB Number for background form AD-755: (Approved under OMB No. 0505-0001).
Expiration Date of Approval: Awaiting renewal.
Title: National Research, Promotion, and Consumer Information Programs.
OMB Number: 0581-NEW.
Expiration Date of Approval: 3 years from approval date.
Type of Request: New information collection for research and promotion programs.
Abstract: The information collection requirements in the request are essential to carry out the intent of the 1996 Act. The information collection concerns a proposal received by USDA for a national research and promotion program for the softwood lumber industry. The program would be financed by an assessment on softwood lumber domestic manufacturers and importers and would be administered by a board of industry members selected by the Secretary. The program would provide for an exemption for the first 15 million board feet of softwood lumber shipped by domestic manufacturers within the United States or imported into the United States during the year. A referendum would be held among eligible domestic manufacturers and importers to determine whether they favor implementation of the program prior to it going into effect. The purpose of the program would be to help build the market for softwood lumber.
In summary, the information collection requirements under the program concern Board nominations, the collection of assessments, and referenda. For Board nominations, domestic manufacturers and importers interested in serving on the Board would be asked to submit a “Nomination Form” to the Board indicating their desire to serve or to nominate another industry member to serve on the Board. Interested persons could also submit a background statement outlining qualifications to serve on the Board. Except for the initial Board nominations, domestic manufacturers and importers would have the opportunity to submit a “Nomination Ballot” to the Board where they would vote for candidates to serve on the Board. Nominees would also have to submit a background information form, “AD-755,” to the Secretary to ensure they are qualified to serve on the Board.
Regarding assessments, domestic manufacturers and importers who ship or import less than 15 million board feet annually could submit a request, “Application for Exemption from Assessments,” to the Board for an exemption from paying assessments. Domestic manufacturers and importers would be asked to submit a “Shipment/Import Report” that would accompany their assessments paid to the Board and report the quantity of softwood lumber shipped domestically or imported during the applicable period, the quantity exported from the United States, the quantity for which assessments were paid, and the country of export (for imports). Domestic manufacturers who ship less than 15 million board feet annually and are exempt from paying assessments would not be required to submit this report. Additionally, only importers who pay their assessments directly to the Board would be required to submit this report. As previously mentioned, the majority of importer assessments would be collected by Customs. Customs would Start Printed Page 61015remit the funds to the Board and the other information would be available from Customs (i.e., country of export, quantity of softwood lumber imported). Finally, domestic manufacturers and importers who would qualify as 100 percent organic under the NOP could submit an “Organic Exemption Form” to the Board and request an exemption from assessments. Importers could also request a refund of any assessments paid to Customs.
There would also be an additional burden on domestic manufacturers and importers voting in referenda. The referendum ballot, which represents the information collection requirement relating to referenda, is addressed in a proposed rule on referendum procedures which is published separately in this issue of the Federal Register.
Information collection requirements that are included in this proposal include:
(1) Nomination Form
Estimate of Burden: Public recordkeeping burden for this collection of information is estimated to average 0.25 hour per application.
Respondents: Domestic manufacturers and importers.
Estimated Number of Respondents: 50.
Estimated Number of Responses per Respondent: 1.
Estimated Total Annual Burden on Respondents: 12.5 hours.
(2) Background Statement
Estimate of Burden: Public recordkeeping burden for this collection of information is estimated to average 0.25 hour per application.
Respondents: Domestic manufacturers and importers.
Estimated Number of Respondents: 50.
Estimated Number of Responses per Respondent: 1.
Estimated Total Annual Burden on Respondents: 12.5 hours.
(3) Nomination Ballot
Estimate of Burden: Public recordkeeping burden for this collection of information is estimated to average 0.25 hour per application.
Respondents: Domestic manufacturers and importers.
Estimated Number of Respondents: 300.
Estimated Number of Responses per Respondent: 1.
Estimated Total Annual Burden on Respondents: 75 hours.
(4) Background Information Form AD-755 (OMB Form No. 0505-0001)
Estimate of Burden: Public reporting for this collection of information is estimated to average 0.5 hour per response for each Board nominee.
Respondents: Domestic manufacturers and importers.
Estimated number of Respondents: 13 (38 for initial nominations to the Board, 0 for the second year, and up to 13 annually thereafter).
Estimated number of Responses per Respondent: 1 every 3 years. (0.3)
Estimated Total Annual Burden on Respondents: 19 hours for the initial nominations to the Board, 0 hours for the second year of operation, and up to 6.5 hours annually thereafter.
(5) Application for Exemption From Assessments
Estimate of Burden: Public reporting burden for this collection of information is estimated to average 0.25 hour per domestic manufacturer or importer reporting on softwood lumber shipped domestically or imported. Upon approval of an application, domestic manufacturers and importers would receive exemption certification.
Respondents: Domestic manufacturers (232) and importers (780) who ship domestically or import less than 15 million board feet of softwood lumber annually.
Estimated number of Respondents: 1,012.
Estimated number of Responses per Respondent: 1.
Estimated Total Annual Burden on Respondents: 253 hours.
(6) Shipment/Import Report
Estimate of Burden: Public reporting burden for this collection of information is estimated to average 0.5 hour per domestic manufacturer or importer.
Respondents: Domestic manufacturers who ship over 15 million board feet annually (363) and importers who remit their assessments directly to the Board (assume 5 percent of 103 importers, or 5).
Estimated number of Respondents: 368.
Estimated number of Responses per Respondent: 4.
Estimated Total Annual Burden on Respondents: 736 hours.
(7) Organic Exemption Form
Estimate of Burden: Public recordkeeping burden for this collection of information is estimated to average 0.5 hours per exemption form.
Respondents: Organic domestic manufacturers and importers.
Estimated Number of Respondents: 1.
Estimated Number of Responses per Respondent: 1.
Estimated Total Annual Burden on Respondents: 0.5 hour.
(8) Refund of Assessments Paid on Organic Softwood Lumber
Estimate of Burden: Public reporting burden for this collection of information is estimated to average 0.25 hour.
Respondents: Organic importers.
Estimated Number of Respondents: 1.
Estimated Number of Responses per Respondent: 1.
Estimated Total Annual Burden on Respondents: 0.25 hour.
(9) A Requirement To Maintain Records Sufficient To Verify Reports Submitted Under the Order
Estimate of Burden: Public recordkeeping burden for keeping this information is estimated to average 0.5 hours per record keeper maintaining such records.
Recordkeepers: Domestic manufacturers (595) and importers (883).
Estimated number of recordkeepers: 1,478.
Estimated total recordkeeping hours: 739 hours.
As noted above, under the proposed program, domestic manufacturers and importers would be required to pay assessments and file reports with and submit assessments to the Board (importers through Customs). While the proposed Order would impose certain recordkeeping requirements on domestic manufacturers and importers, information required under the proposed Order could be compiled from records currently maintained. Such records shall be retained for at least two years beyond the fiscal year of their applicability.
An estimated 1,478 respondents would provide information to the Board (595 domestic manufacturers and 883 importers). The estimated cost of providing the information to the Board by respondents would be $24,387. This total has been estimated by multiplying 739 total hours required for reporting and recordkeeping by $33, the average mean hourly earnings of various occupations involved in keeping this information. Data for computation of this hourly rate was obtained from the U.S. Department of Labor Statistics.
The proposed Order's provisions have been carefully reviewed, and every effort has been made to minimize any unnecessary recordkeeping costs or requirements, including efforts to utilize information already submitted under other programs administered by USDA and other State programs.Start Printed Page 61016
The proposed forms would require the minimum information necessary to effectively carry out the requirements of the program, and their use is necessary to fulfill the intent of the 1996 Act. Such information can be supplied without data processing equipment or outside technical expertise. In addition, there are no additional training requirements for individuals filling out reports and remitting assessments to the Board. The forms would be simple, easy to understand, and place as small a burden as possible on the person required to file the information.
Collecting information quarterly would coincide with normal industry business practices. The timing and frequency of collecting information are intended to meet the needs of the industry while minimizing the amount of work necessary to fill out the required reports. The requirement to keep records for two years is consistent with normal industry practices. In addition, the information to be included on these forms is not available from other sources because such information relates specifically to individual domestic manufacturers and importers who are subject to the provisions of the 1996 Act. Therefore, there is no practical method for collecting the required information without the use of these forms.
Request for Public Comment Under the Paperwork Reduction Act
Comments are invited on: (a) Whether the proposed collection of information is necessary for the proper performance of functions of the proposed Order and USDA's oversight of the proposed Order, including whether the information would have practical utility; (b) the accuracy of USDA's estimate of the burden of the proposed collection of information, including the validity of the methodology and assumptions used; (c) the accuracy of USDA's estimate of the principal manufacturing areas in the United States for softwood lumber; (d) the accuracy of USDA's estimate of the number of domestic manufacturers and importers of softwood lumber that would be covered under the program; (e) ways to enhance the quality, utility, and clarity of the information to be collected; and (f) ways to minimize the burden of the collection of information on those who are to respond, including the use of appropriate automated, electronic, mechanical, or other technological collection techniques or other forms of information technology.
Comments concerning the information collection requirements contained in this action should reference OMB No. 0581-NEW. In addition, the docket number, date, and page number of this issue of the Federal Register also should be referenced. Comments should be sent to the same addresses referenced in the ADDRESSES section of this rule.
OMB is required to make a decision concerning the collection of information contained in this rule between 30 and 60 days after publication. Therefore, a comment to OMB is best assured of having its full effect if OMB receives it within 30 days of publication.
USDA made modifications to the proponent's proposal to conform with other similar national research and promotion programs implemented under the 1996 Act.
While the proposal set forth below has not received the approval of USDA, it is determined that this proposed Order is consistent with and would effectuate the purposes of the 1996 Act.
As previously mentioned, for the proposed Order to become effective, it must be approved by a majority of domestic manufacturers and importers voting for approval in a referendum who also represent a majority of the volume of softwood lumber represented in the referendum. Referendum procedures will be published separately in this issue of the Federal Register.
A 60-day comment period is provided to allow interested persons to respond to this proposal. All written comments received in response to this rule by the date specified will be considered prior to finalizing this action.
Start List of SubjectsList of Subjects in 7 CFR Part 1217
- Administrative practice and procedure
- Advertising
- Consumer information
- Marketing agreements
- Softwood Lumber promotion
- Reporting and recordkeeping requirements
For the reasons set forth in the preamble, it is proposed that Title 7, Chapter XI of the Code of Federal Regulations be amended by adding part 1217 to read as follows:
Start PartPART 1217—SOFTWOOD LUMBER RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER
Start Printed Page 61017- 1217.1
- Act.
- 1217.2
- Blue Ribbon Commission or BRC.
- 1217.3
- Board.
- 1217.4
- Board foot.
- 1217.5
- Conflict of interest.
- 1217.6
- Customs.
- 1217.7
- Department or USDA.
- 1217.8
- Domestic manufacturer.
- 1217.9
- Export.
- 1217.10
- Fiscal period or year.
- 1217.11
- Importer.
- 1217.12
- Information.
- 1217.13
- Manufacture.
- 1217.14
- Manufacturer for the U.S. market.
- 1217.15
- Marketing.
- 1217.16
- Nominal size.
- 1217.17
- Order.
- 1217.18
- Part and subpart.
- 1217.19
- Person.
- 1217.20
- Planing.
- 1217.21
- Programs, plans and projects.
- 1217.22
- Promotion.
- 1217.23
- Research.
- 1217.24
- Secretary.
- 1217.25
- Softwood lumber.
- 1217.26
- Softwoods.
- 1217.27
- State.
- 1217.28
- Suspend.
- 1217.29
- Terminate.
- 1217.30
- United States.
- 1217.40
- Establishment and membership.
- 1217.41
- Nominations and appointments.
- 1217.42
- Term of office.
- 1217.43
- Removal and vacancies.
- 1217.44
- Procedure.
- 1217.45
- Reimbursement and attendance.
- 1217.46
- Powers and duties.
- 1217.47
- Prohibited activities.
- 1217.50
- Budget and expenses.
- 1217.51
- Financial statements.
- 1217.52
- Assessments.
- 1217.53
- Exemption from assessment.
- 1217.60
- Programs, plans and projects.
- 1217.61
- Independent evaluation.
- 1217.62
- Patents, copyrights, inventions, product formulations, and publications.
- 1217.70
- Reports.
- 1217.71
- Books and records.
- 1217.72
- Confidential treatment.
- 1217.80
- Right of the Secretary.
- 1217.81
- Referenda.
- 1217.82
- Suspension or termination.
- 1217.83
- Proceedings after termination.
- 1217.84
- Effect of termination or amendment.
- 1217.85
- Personal liability.
- 1217.86
- Separability.
- 1217.87
- Amendments.
- 1217.88
- OMB control numbers.
Subpart A—Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order Definitions Softwood Lumber Board Expenses and Assessments Promotion, Research and Information Reports, Books, and Records Miscellaneous Subpart B—[Reserved] Subpart A—Softwood Lumber Research, Promotion, Consumer Education, and Industry Information Order
Definitions
Act.Act means the Commodity Promotion, Research, and Information Act of 1996 (7 U.S.C. 7411-7425), and any amendments thereto.
Blue Ribbon Commission.Blue Ribbon Commission or BRC means the 21-member committee representing businesses that manufacture softwood lumber in the United States or import softwood lumber to the United States formed to pursue an industry research, promotion, and information program.
Board.Board or Softwood Lumber Board means the administrative body established pursuant to § 1217.40, or such other name as recommended by the Board and approved by the Department.
Board foot.Board foot or BF means a unit of measurement of softwood lumber represented by a board 12-inches long, 12-inches wide, and 1-inch thick or its cubic equivalent. A board foot calculation for softwood lumber 1 inch or more in thickness is based on its nominal thickness and width and the actual length. Softwood lumber with a nominal thickness of less than 1 inch is calculated as 1 inch.
Conflict of interest.Conflict of interest means a situation in which a member or employee of the Board has a direct or indirect financial interest in a person who performs a service for, or enters into a contract with, the Board for anything of economic value.
Customs.Customs means the United States Customs and Border Protection or U.S. Customs Service, an agency of the United States Department of Homeland Security.
Department or USDA.Department or USDA means the U.S. Department of Agriculture, or any officer or employee of the Department to whom authority has heretofore been delegated, or to whom authority may hereafter be delegated, to act in the Secretary's stead.
Domestic manufacturer.Domestic manufacturer means any person who is a first handler and is engaged in the manufacturing, sale and shipment of softwood lumber in the United States during a fiscal period and who owns, or shares the ownership and risk of loss of manufacturing of softwood lumber or a person who is engaged in the business of manufacturing, or causes to be manufactured, sold and shipped such softwood lumber in the United States beyond personal use. This term does not include any person who re-manufactures softwood lumber that has already been subject to assessment under this Order.
Export.Export means to manufacture and ship softwood lumber from within the United States to locations outside of the United States.
Fiscal period or year.Fiscal period or year means a calendar year from January 1 through December 31, or such other period as recommended by the Board and approved by the Secretary.
Importer.Importer means any person who imports softwood lumber from outside the United States for sale in the United States as a principal or as an agent, broker, or consignee of any person who manufactures softwood lumber outside the United States for sale in the United States, and who is listed in the import records as the importer of record for such softwood lumber.
Information.Information means activities or programs designed to disseminate the results of research, new and existing marketing programs, new and existing marketing strategies, new and existing uses and applications, and to enhance the image of softwood lumber and the forests from which it comes. These include:
(a) Consumer education, which means any action taken to provide information to, and broaden the understanding of, the general public regarding softwood lumber; and
(b) Industry information, which means information and programs that would enhance the image of the softwood lumber industry.
Manufacture.Manufacture means the process of transforming softwood logs into softwood lumber.
Manufacturer for the U.S. market.Manufacturer for the U.S. market means domestic manufacturers and importers of softwood lumber as defined in this Order.
Marketing.Marketing means the sale or other disposition of softwood lumber in interstate, foreign, or intrastate commerce.
Nominal size.Nominal size means the size by which softwood lumber is known and sold in the marketplace that differs from actual size and is based on the thickness and width of a board when it is first cut from a log, or rough cut, prior to drying and planing.
Order.Order means an order issued by the Secretary under section 514 of the Act that provides for a program of generic promotion, research, and information regarding agricultural commodities authorized under the Act.
Part and subpart.Part means the Softwood Lumber Research, Promotion, Consumer Education, and Industry Information Order and all rules, regulations, and supplemental orders issued pursuant to the Act and the Order. The Order shall be a subpart of such part.
Person.Person means any individual, group of individuals, partnership, company, corporation, association, affiliate, cooperative, or any other legal entity.
Planing.Planing means the act of smoothing the surface of a board to make the wood a uniform size.
Programs, plans and projects.Programs, plans and projects mean those research, promotion and information programs, plans, or projects established pursuant to this Order.
Promotion.Promotion means any action taken, including paid advertising, public relations and other communications, and promoting the results of research, that presents a favorable image of softwood lumber to the public and to any and all consumers and those who influence consumption of softwood lumber with the intent of improving the perception, markets and competitive position of softwood lumber and stimulating sales of softwood lumber.
Start Printed Page 61018Research.Research means any activity that advances the position of softwood lumber in the marketplace that includes any type of test, study, or analysis designed to advance the image, desirability, use, marketability, sales, product development, or quality of softwood lumber; new applications; improving softwood lumber's position in building and fire codes; softwood lumber product testing and safety; and evaluating the effectiveness of market development and promotion efforts including life cycle studies, forestry, sustainable forest management, environmental preferrability, competitiveness, efficiency, pest and disease control, water quality and other management aspects of forestry and the forests from which softwood lumber originates.
Secretary.Secretary means the Secretary of Agriculture of the United States, or any other officer or employee of the Department to whom authority has been delegated, or to whom authority may hereafter be delegated, to act in the Secretary's stead.
Softwood lumber.Softwood lumber means all softwood lumber and softwood lumber products described in section 804(a) of Title VIII of the Tariff Act of 1930, as amended (19 U.S.C. 1202-1683g). This definition does not include those products excluded or excepted under sections 804(b) and (c) of that Act.
Softwood.Softwood means one of the botanical groups of trees that have needle-like or scale-like leaves, or conifers.
State.State means any of the several 50 States of the United States, the District of Columbia, the Commonwealth of Puerto Rico, and the territories and possessions of the United States.
Suspend.Suspend means to issue a rule under section 553 of title 5 U.S.C. to temporarily prevent the operation of an order or part thereof during a particular period of time specified in the rule.
Terminate.Terminate means to issue a rule under section 553 of title 5 U.S.C. to cancel permanently the operation of an order or part thereof beginning on a date certain specified in the rule.
United States.United States means collectively the 50 States, the District of Columbia, the Commonwealth of Puerto Rico and the territories and possessions of the United States.
Softwood Lumber Board
Establishment and membership.(a) Establishment of the Board. There is hereby established a Softwood Lumber Board to administer the terms and provisions of this Order and promote the use of softwood lumber. The Board shall be composed of manufacturers for the U.S. market who manufacture and domestically ship or import 15 million board feet or more of softwood lumber in the United States during a fiscal period. Seats on the Board shall be apportioned based on the volume of softwood lumber manufactured and shipped within the United States by domestic manufacturers and the volume of softwood lumber imported into the United States.
(b) The Board shall be composed of 18 or 19 members, depending upon whether an additional importer member is appointed to the Board, pursuant to paragraph (b)(2)(iii) of this section. The Board shall be established as follows:
(1) Domestic manufacturers. Twelve members shall be domestic manufacturers from the following three regions:
(i) Six members shall be from the U.S. South Region, which consists of the States of Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee, and Texas;
(ii) Five members shall be from the U.S. West Region, which consists of the States of Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada, New Mexico, North Dakota, Oregon, South Dakota, Utah, Washington, and Wyoming; and
(iii) One member shall be from the Northeast and Lake States Region, which consists of the States of Connecticut, Delaware, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Virginia, Vermont, West Virginia, Wisconsin, and all other parts of the United States not listed in paragraphs (b)(1)(i), (b)(1)(ii), or (b)(1)(iii) of this section.
(2) Importers. Six members shall be importers who represent the following regions and import the majority of their softwood lumber from the respective region:
(i) Four members shall import softwood lumber from the Canadian West Region, which consists of the provinces of British Columbia and Alberta; and
(ii) Two members shall import softwood lumber from the Canadian East Region, which consists of the Canadian territories and all other Canadian provinces not listed in paragraph (b)(2)(i) of this section that import softwood lumber into the United States.
(iii) If the Secretary, at the request of the Board or on his or her own, determines that it would be consistent with the provisions of the Act, the Secretary may appoint an additional importer to the Board to represent a region not otherwise specified in paragraphs (b)(2)(i) and (b)(2)(ii) of this section. Nominees would be solicited as prescribed in paragraph (b) of § 1217.41, or in the case of the Secretary acting on his or her own will be handled by the Secretary, and all the names of eligible candidates would be submitted to the Secretary for consideration. Such nominees must certify that the majority of their softwood lumber is imported from such region. In addition, representation for the region not otherwise specified in paragraphs (b)(i) and (ii) of this section would be subject to the Board review and reapportionment provided for in paragraph (c) of this section.
(c) In each five-year period, but not more frequently than once in each three-year period, the Board shall:
(1) Review, based on a three-year average, the geographical distribution of the volume of softwood lumber manufactured and shipped within the United States by domestic manufacturers and the volume of softwood lumber imported into the United States; and
(2) If warranted, recommend to the Secretary the reapportionment of the Board membership to reflect changes in the geographical distribution of the volume of softwood lumber manufactured and shipped within the United States by domestic manufacturers and the volume of softwood lumber imported into the United States. The destination of volumes between regions also shall be considered. Any changes in Board composition shall be implemented by the Secretary through rulemaking.
Nominations and appointments.(a) Initial nominations will be submitted to the Secretary by the Blue Ribbon Commission. Before considering any nominations, the BRC shall publicize the nomination process, using Start Printed Page 61019trade press or other means it deems appropriate, and shall outreach to all manufacturers for the U.S. market who domestically manufacture and/or import 15 million board feet or more of softwood lumber per fiscal year in order to generate nominees that reflect the different operations within the softwood lumber industry. The BRC may use regional caucuses, mail or other methods to elicit potential nominees. The BRC shall submit the nominations to the Secretary and recommend two nominees for each Board position specified in paragraphs (b)(1) and (b)(2)(i) and (b)(2)(ii) of § 1217.40. All nominees solicited pursuant to § 1217.40(b)(2)(iii) shall be submitted to the Secretary through the BRC. From the nominations submitted by the BRC, the Secretary shall select the members of the Board.
(b) Subsequent nominations shall be conducted as follows:
(1) The Board shall outreach to all segments of the softwood lumber industry. Subsequent nominees must domestically manufacture and/or import 15 million board feet or more of softwood lumber per fiscal year;
(2) Domestic manufacturers and importer nominees may provide the Board a short background statement outlining their qualifications to serve on the Board;
(3) Nominees that are both a domestic manufacturer and an importer may seek nomination to the Board and vote in the nomination process as either a domestic manufacturer or an importer, but not both: Provided, That, such nominees who domestically manufacture the majority of their softwood lumber may seek nomination and vote as a domestic manufacturer, and such nominees who import the majority of their softwood lumber may seek nomination and vote as an importer. Such nominees must domestically manufacture and import 15 million board feet or more of softwood lumber per fiscal year;
(4) Domestic manufacturers who manufacture softwood lumber in more than one region may seek nomination only in the region in which they manufacture the majority of their softwood lumber. The names of domestic manufacturer nominees shall be placed on a ballot by region. The ballots along with the background statements shall be mailed to domestic manufacturers in each respective region for a vote. Domestic manufacturers who manufacture softwood lumber in more than one region may only vote in the region in which they manufacture the majority of their softwood lumber. The votes shall be tabulated for each region with the nominee receiving the highest number of votes at the top of the list in descending order by vote. The top two candidates for each position shall be submitted to the Secretary;
(5) Importer nominees shall certify that the majority of their softwood lumber is imported from the respective region for which they are seeking to represent on the Board and shall provide documentation to verify this if requested by the Board. The names of importer nominees shall be placed on a ballot by region. The ballots along with the background statements shall be mailed to importers in each respective region for a vote. Importers who import softwood lumber from more than one region may only vote in the region from which they import the majority of their softwood lumber. The votes shall be tabulated for each region with the nominee receiving the highest number of votes at the top of the list in descending order by vote. The top two candidates for each position shall be submitted to the Secretary.
(6) The Board must submit nominations to the Secretary at least six months before the new Board term begins. From the nominations submitted by the Board, the Secretary shall select the members of the Board;
(7) No two members shall be employed by a single corporation, company, partnership, or any other legal entity; and
(8) The Board may recommend to the Secretary modifications to its nomination procedures as it deems appropriate. Any such modifications shall be implemented through rulemaking by the Secretary.
Term of office.(a) With the exception of the initial Board, each Board member will serve a three-year term or until the Secretary selects his or her successor. Each term of office shall begin on January 1 and end on December 31. No member may serve more than two consecutive terms, excluding any term of office less than three years.
(b) For the initial board, the terms of Board members shall be staggered for two, three, and four years. Determination of which of the initial members shall serve a term of two, three, or four years shall be recommended to the Secretary by the Blue Ribbon Commission.
Removal and vacancies.(a) In the event that any member of the Board ceases to work for or be affiliated with a domestic manufacturer or importer or ceases to do business in the region he or she represents, such position shall become vacant.
(b) The Board may recommend to the Secretary that a member be removed from office if the member consistently refuses to perform his or her duties or engages in dishonest acts or willful misconduct. The Secretary may remove the member if he or she finds that the Board's recommendation shows adequate cause. Further, without recommendation of the Board, a member may be removed by the Secretary upon showing of adequate cause, including the failure by a member to submit reports or remit assessments required under this part, if the Secretary determines that such member's continued service would be detrimental to the achievement of the purposes of the Act.
(c) If a position becomes vacant, nominations to fill the vacancy will be conducted using the nominations process set forth in this Order. A vacancy will not be required to be filled if the unexpired term is less than six months.
Procedure.(a) A majority of the Board members (10) will constitute a quorum so long as at least three of the members present are importer members and six of the members present are domestic manufacturers. If participation by telephone or other means is permitted, members participating by such means shall count as present in determining quorum or other voting requirements set forth in this section.
(b) All votes at meetings of the Board and executive committee will be cast in person or by electronic voting or other means as the Board and Secretary deem appropriate to allow members participating by telephone or other electronic means to cast votes. Voting by proxy will not be allowed.
(c) Each member of the Board will be entitled to one vote on any matter put to the Board and the motion will carry if supported by 10 Board members, except for recommendations to change the assessment rate or to adopt a budget, both of which require affirmation by at least two-thirds (12 members for an 18 member Board and 13 members for a 19 member Board) of the Board members. If a Board has vacant positions, recommendations to change the assessment rate or to adopt a budget must pass by an affirmative vote of at least two-thirds of the Board members, exclusive of the vacant seats.
(d) The Board must give members and the Secretary timely notice of all Board, executive and committee meetings.
(e) In lieu of voting at a properly convened meeting, and when, in the opinion of the Board's chairperson, such Start Printed Page 61020action is considered necessary, the Board may take action by mail, telephone, electronic mail, facsimile, or any other means of communication. Any action taken under this procedure is valid only if:
(1) All members and the Secretary are notified and the members are provided the opportunity to vote;
(2) Ten (10) Board members vote in favor of the action (unless two-thirds vote of the Board members is required under the Order); and
(3) All votes are promptly confirmed in writing and recorded in the Board minutes.
Reimbursement and attendance.Board members will serve without compensation. Board members will be reimbursed for reasonable travel expenses, as approved by the Board, which they incur when performing Board business.
Powers and duties.The Board shall have the following powers and duties:
(a) To administer this Order in accordance with its terms and conditions and to collect assessments;
(b) To develop and recommend to the Secretary for approval such bylaws as may be necessary for the functioning of the Board and such rules, regulations as may be necessary to administer the Order, including activities authorized to be carried out under the Order;
(c) To meet, organize, and select from among its members a chairperson and, such other officers as may be necessary;
(d) To create an executive committee of five members of the Board comprised of the chairperson and four other members elected by the Board. The duties of the executive committee shall be specified in bylaws that are recommended by the Board and approved by the Secretary;
(e) To create other committees or subcommittees, which may include individuals other than Board members, as the Board deems necessary from its membership and other representatives it deems appropriate;
(f) To employ or contract with such persons, other than the members, as it may deem necessary to assist the Board in carrying out its duties, and to determine the compensation and define the duties of each;
(g) To notify manufacturers for the U.S. market of all Board meetings through press releases or other means and to give the Secretary the same notice of Board meetings, executive committee, and subcommittee meetings that is given to members in order that the Secretary's representative(s) may attend such meetings, and to keep and report minutes of each meeting to the Secretary;
(h) To develop and administer programs, plans, and projects and enter into contracts or agreements, which must be approved by the Secretary before becoming effective, for promotion, research, and information, including consumer and industry information, research and advertising designed to strengthen the softwood lumber industry's position in the marketplace and to maintain, develop, and expand markets for softwood lumber. The payment of costs for such activities shall be with funds collected pursuant to the Order, including funds collected pursuant to § 1217.50(f). Each contract or agreement shall provide that:
(1) The contractor or agreeing party shall develop and submit to the Board a program, plan, or project together with a budget that specifies the cost to be incurred to carry out the activity;
(2) The contractor or agreeing party shall keep accurate records of all of its transactions and make periodic reports to the Board of activities conducted, submit accounting for funds received and expended, and make such other reports as the Secretary or Board may require;
(3) The Secretary may audit the records of the contracting or agreeing party periodically; and
(4) Any subcontractor who enters into a contract with a Board contractor and who receives or otherwise uses funds allocated by the Board shall be subject to the same provisions as the contractor.
(i) To prepare and submit to the Secretary for approval 60 calendar days in advance of the beginning of a fiscal period, rates of assessment and a budget of the anticipated expenses to be incurred in the administration of the Order, including the probable cost of each promotion, research, and information activity proposed to be developed or carried out by the Board;
(j) To borrow funds necessary for startup expenses of the Order;
(k) To invest assessments collected and other funds received pursuant to the Order and use earnings from invested assessments to pay for activities carried out pursuant to the Order;
(l) To recommend changes to the assessment rates as provided in this part;
(m) To cause its books to be audited by a certified public accountant at the end of each fiscal period and at such other times as the Secretary may request, and to submit a report of each audit directly to the Secretary;
(n) To periodically prepare and make public and to make available to manufacturers for the U.S. market reports of its activities and, at least once each fiscal period, to make public an accounting of funds received and expended;
(o) To maintain minutes, books, and records and prepare and submit to the Secretary such reports from time to time as may be required for appropriate accounting with respect to the receipt and disbursement of funds entrusted to it, and to submit to the Secretary such information pertaining to this part or subpart as he or she may request;
(p) To act as an intermediary between the Secretary and any manufacturer for the U.S. market;
(q) To investigate and to receive and investigate and report to the Secretary complaints of violations of the Order; and
(r) To develop and recommend such rules and regulations to the Secretary for approval as may be necessary for the development and execution of plans or activities to effectuate the purposes of the Act.
Prohibited activities.The Board may not engage in, and shall prohibit the employees and agents of the Board from engaging in:
(a) Any action that would be a conflict of interest;
(b) Using funds collected by the Board under the Order to undertake any action for the purpose of influencing legislation or governmental action or policy, by local, State, national, and foreign governments or subdivision thereof, other than recommending to the Secretary amendments to the Order; and
(c) No program, plan or project including advertising shall be false or misleading or disparaging to another agricultural commodity. Softwood lumber of all origins shall be treated equally.
Expenses and Assessments
Budget and expenses.(a) At least 60 calendar days prior to the beginning of each fiscal period, and as may be necessary thereafter, the Board shall prepare and submit to the Department a budget for the fiscal period covering its anticipated expenses and disbursements in administering this part. The budget for research, promotion or information may not be implemented prior to approval by the Secretary. Each such budget shall include:
(1) A statement of objectives and strategy for each program, plan, or project;
(2) A summary of anticipated revenue, with comparative data for at least one Start Printed Page 61021preceding fiscal year, except for the initial budget;
(3) A summary of proposed expenditures for each program, plan, or project; and
(4) Staff and administrative expense breakdowns, with comparative data for at least one preceding fiscal year, except for the initial budget.
(b) Each budget shall provide adequate funds to defray its proposed expenditures and to provide for a reserve as set forth in this Order.
(c) Subject to this section, any amendment or addition to an approved budget must be approved by the Department, including shifting funds from one program, plan, or project to another.
(d) The Board is authorized to incur such expenses, including provision for a reserve, as the Secretary finds reasonable and likely to be incurred by the Board for its maintenance and functioning, and to enable it to exercise its powers and perform its duties in accordance with the provisions of this subpart. Such expenses shall be paid from funds received by the Board.
(e) With approval of the Department, the Board may borrow money for the payment of startup expenses subject to the same fiscal, budget, and audit controls as other funds of the Board. Any funds borrowed shall be expended only for startup costs and capital outlays and are limited to the first year of operation by the Board.
(f) The Board may accept voluntary contributions, and is encouraged to seek other appropriate funding sources to carry out activities authorized by the Order. Such contributions shall be free from any encumbrances by the donor and the Board shall retain complete control of their use. The Board may receive funds from outside sources (i.e., Federal or State grants, Foreign Agricultural Service funds), with approval of the Secretary, for specific authorized projects.
(g) The Board shall reimburse the Secretary for all expenses incurred by the Secretary in the implementation, administration, enforcement and supervision of the Order, including all referendum costs in connection with the Order.
(h) For fiscal years beginning two years after the date the of the first Board meeting, the Board may not expend for administration, maintenance, and the functioning of the Board an amount that is greater than 8 percent of the assessment and other income received by and available to the Board for the fiscal year. For purposes of this limitation, reimbursements to the Secretary shall not be considered administrative costs.
(i) The Board may establish an operating monetary reserve and may carry over to subsequent fiscal periods excess funds in any reserve so established: Provided, That, the funds in the reserve do not exceed one fiscal period's budget of expenses. Subject to approval by the Secretary, such reserve funds may be used to defray any expenses authorized under this subpart.
(j) Pending disbursement of assessments and all other revenue under a budget approved by the Secretary, the Board may invest assessments and all other revenues collected under this part in:
(1) Obligations of the United States or any agency of the United States;
(2) General obligations of any State or any political subdivision of a State;
(3) Interest bearing accounts or certificates of deposit of financial institutions that are members of the Federal Reserve System;
(4) Obligations fully guaranteed as to principal interest by the United States; or
(5) Other investments as authorized by the Secretary.
Financial statements.(a) The Board shall prepare and submit financial statements to the Department on a quarterly basis, or at any other time as requested by the Secretary. Each such financial statement shall include, but not be limited to, a balance sheet, income statement, and expense budget. The expense budget shall show expenditures during the time period covered by the report, year-to-date expenditures, and the unexpended budget.
(b) Each financial statement shall be submitted to the Department within 30 calendar days after the end of the time period to which it applies.
(c) The Board shall submit to the Department an annual financial statement within 90 calendar days after the end of the fiscal year to which it applies.
Assessments.(a) The Board's programs and expenses shall be paid by assessments on manufacturers for the U.S. market, other income of the Board, and other funds available to the Board.
(b) Subject to the exemptions specified in § 1217.53, each manufacturer for the U.S. market shall pay an assessment to the Board at the rate of $0.35 per thousand board feet of softwood lumber except that no person shall pay an assessment on the first 15 million board feet of softwood lumber otherwise subject to assessment in a fiscal year. Domestic manufacturers shall pay assessments based on the volume of softwood lumber shipped within the United States and importers shall pay assessments based on the volume softwood lumber imported to the United States.
(c) At least 24 months after the Order becomes effective and periodically thereafter, the Board shall review and may recommend to the Secretary, upon an affirmative vote by at least two-thirds of the Board members, a change in the assessment rate. In no event may the rate be less than $0.35 per thousand board feet nor more than $0.50 per thousand board feet. A change in the assessment rate is subject to rulemaking by the Secretary.
(d) Domestic manufacturers shall remit to the Board the amount due no later than the thirtieth calendar day of the month following the end of the quarter in which the softwood lumber was shipped.
(e) Each importer of softwood lumber shall pay through Customs to the Board an assessment on softwood lumber and softwood lumber products imported into the United States as described in section 804(a) of Title VIII of the Tariff Act of 1930, as amended (19 U.S.C. 1202-1683g).
(f) The following conversion factors shall be used to determine the equivalent volume of softwood lumber in thousand board feet. The factor used to convert one cubic meter to one thousand board feet is 0.423776001. The current assessment rate per one cubic meter is $0.1483. The factor used to convert the value in dollars to one thousand board feet is 0.0031746 and is based on an average of $315 per one thousand board feet. The current assessment rate per dollar value is $0.0011. The Board may recommend to the Secretary, upon affirmative vote by at least two-thirds of the Board members, a change in the factors used to convert value in dollars to one thousand board feet. Such a change is subject to rulemaking by the Secretary.
(g) If Customs does not collect an assessment from an importer, the importer is responsible for paying the assessment directly to the Board within 30 calendar days after importation.
(h) When a domestic manufacturer or importer fails to pay the assessment within 60 calendar days of the date it is due, the Board may impose a late payment charge and interest. The late payment charge and rate of interest shall be prescribed in regulations issued by the Secretary. All late assessments shall be subject to the specified late payment charge and interest. Persons failing to Start Printed Page 61022remit total assessments due in a timely manner may also be subject to actions under Federal debt collection procedures.
(i) The Board may accept advance payment of assessments from any manufacturer for the U.S. market that will be credited toward any amount for which that person may become liable. The Board may not pay interest on any advance payment.
(j) If the Board is not in place by the date the first assessments are to be collected, the Secretary shall receive assessments and shall pay such assessments and any interest earned to the Board when it is formed.
Exemption from assessment.(a) Manufacturers for the U.S. market who domestically ship and/or import less than 15 million board feet annually.
(1) Domestic manufacturers who ship less than 15 million board feet of softwood lumber within the United States in a fiscal year are exempt from paying assessments. Such manufacturers must apply to the Board, on a form provided by the Board, for a certificate of exemption prior to the start of the fiscal year. This is an annual exemption and domestic manufacturers must reapply each year. Such manufacturers shall certify that they will ship less than 15 million board feet of softwood lumber during the fiscal year for which the exemption is claimed. Upon receipt of an application for exemption, the Board shall determine whether an exemption may be granted. The Board may request past shipment data to support the exemption request. The Board will then issue, if deemed appropriate, a certificate of exemption to the eligible domestic manufacturer. It is the responsibility of the domestic manufacturer to retain a copy of the certificate of exemption.
(2) Importers who import into the United States less than 15 million board feet of softwood lumber in a fiscal year are exempt from paying assessments. Such importers must apply to the Board, on a form provided by the Board, for a certificate of exemption prior to the start of the fiscal year. This is an annual exemption and importers must reapply each year. Such importers shall certify that they will import less than 15 million board feet of softwood lumber during the fiscal year for which the exemption is claimed. Upon receipt of an application for exemption, the Board shall determine whether an exemption is granted. The Board may request past import data to support the exemption request. The Board will then issue, if deemed appropriate, a certificate of exemption to the eligible importer. It is the responsibility of the importer to retain a copy of the certificate of exemption. The Board shall refund such importers their assessments as collected by Customs no later than 60 calendar days after receipt of such assessments by the Board. No interest shall be paid on the assessments collected by Customs.
(3) Domestic manufacturers who did not apply to the Board for an exemption and shipped less than 15 million board feet of softwood lumber within the United States during the fiscal year shall receive a refund from the Board for the applicable assessments within 30 calendar days after the end of the fiscal year. Board staff shall determine the assessments paid and refund the amount due to the domestic manufacturer accordingly.
(4) Importers who did not apply to the Board for an exemption and imported less than 15 million board feet of softwood lumber during the fiscal year shall receive a refund from the Board for the applicable assessments within 30 calendar days after the end of the fiscal year.
(5) If an entity is both a domestic manufacturer and an importer, such entity's domestic shipments and imports during a fiscal year shall count towards the 15 million board feet exemption.
(6) Domestic manufacturers and importers who received an exemption certificate from the Board but shipped or imported 15 million board feet or more of softwood lumber during the fiscal year shall pay the Board the applicable assessments owed on the domestic shipments or imports over the 15 million board foot-exemption threshold within 30 calendar days after the end of the fiscal year and submit any necessary reports to the Board pursuant to § 1217.70.
(7) The Board may develop additional procedures to administer this exemption as appropriate. Such procedures shall be implemented through rulemaking by the Secretary.
(b) Manufacturers for the U.S. market who domestically ship or import over 15 million board feet annually.
(1) Domestic manufacturers who domestically ship more than 15 million board feet per fiscal year shall not pay assessments on their first 15 million board feet of softwood lumber shipped during the applicable fiscal year.
(2) Importers who import more than 15 million board feet per fiscal year shall be exempt from paying assessments on their first 15 million board feet of softwood lumber imported during the applicable fiscal year. Such importers shall receive a refund from the Board for the applicable assessments collected by Customs. The Board shall refund such importers their assessments no later than 60 calendar days after receipt by the Board.
(c) Export. Shipments of softwood lumber by domestic manufacturers to locations outside of the United States are exempt from assessment. The Board shall establish procedures for approval by the Secretary for refunding assessments that may be paid on such shipments and establish any necessary safeguards as deemed appropriate. Safeguard procedures would be implemented by the Secretary through rulemaking. The Board may also recommend to the Secretary that such shipments be assessed if it deems appropriate. Such action shall be implemented by the Secretary through rulemaking.
(d) Organic.
(1) Organic Act means section 2103 of the Organic Foods Production Act of 1990 (7 U.S.C. 6502).
(2) A domestic manufacturer who operates under an approved National Organic Program (NOP) (7 CFR part 205) system plan, only manufactures and ships softwood lumber that is eligible to be labeled as 100 percent organic under the NOP and is not a split operation shall be exempt from payment of assessments. To obtain an organic exemption, an eligible domestic manufacturer shall submit a request for exemption to the Board, on a form provided by the Board, at any time initially and annually thereafter on or before the start of the fiscal year as long as such manufacturer continues to be eligible for the exemption. The request shall include the following: The manufacturer's name and address; a copy of the organic operation certificate provided by a USDA-accredited certifying agent as defined in the Organic Act, a signed certification that the applicant meets all of the requirements specified for an assessment exemption, and such other information as may be required by the Board and with the approval of the Secretary. The Board shall have 30 calendar days to approve the exemption request. If the exemption is not granted, the Board will notify the applicant and provide reasons for the denial within the same time frame.
(3) An importer who imports only softwood lumber that is eligible to be labeled as 100 percent organic under the NOP and is not a split operation shall be exempt from the payment of assessments. To obtain an organic exemption, an eligible importer must submit documentation to the Board and request an exemption from assessment Start Printed Page 61023on 100 percent of organic softwood lumber, on a form provided by the Board, at any time initially and annually thereafter on or before the beginning of the fiscal year as long as the importer continues to be eligible for the exemption. This documentation shall include the same information as required by domestic manufacturers in paragraph (d)(2) of this section. If the importer complies with the requirements of this section, the Board will grant the exemption and issue a Certificate of Exemption to the importer. The Board will also issue the importer a 9-digit alphanumeric Harmonized Tariff Schedule of the United States (HTSUS) classification valid for 1 year from the date of issue. This HTSUS classification should be entered by the importer on the Customs entry documentation. Any line item entry of 100 percent organic softwood lumber bearing this HTSUS classification assigned by the Board will not be subject to assessments.
(4) Importers who are exempt from assessment in paragraph (d)(3) of this section shall also be eligible for reimbursement of assessments collected by Customs and may apply to the Board for a reimbursement. The importer would be required to submit satisfactory proof to the Board that the importer paid the assessment on exempt organic products.
(5) The exemption will apply immediately following the issuance of the exemption certificate.
Promotion, Research and Information
Programs, plans and projects.(a) The Board shall develop and submit to the Secretary for approval programs, plans and projects authorized by this subpart. Such programs, plans and projects shall provide for promotion, research, education and other activities including consumer and industry information and advertising designed to:
(1) Maintain, develop, expand and grow markets for softwood lumber;
(2) Enhance and strengthen the image, reputation and public acceptance of softwood lumber and the forests from which it comes;
(3) Develop new markets and marketing strategies for softwood lumber;
(4) Expand the knowledge and understanding of the strength, safety and technical applications and encourage innovation in the use of softwood lumber;
(5) Transfer and disseminate the knowledge and understanding of the strength, safety, environmental and sustainable benefits and technical applications of softwood lumber; and
(6) Develop, expand and grow existing and new opportunities and applications for softwood lumber.
(b) No program, plan, or project shall be implemented prior to its approval by the Secretary. Once a program, plan, or project is so approved, the Board shall take appropriate steps to implement it.
(c) The Board must evaluate each program, plan and project authorized under this subpart to ensure that it contributes to an effective and coordinated program of research, promotion and information. The Board must submit the evaluations to the Secretary. If the Board finds that a program, plan or project does not contribute to an effective program of promotion, research, or information, then the Board shall terminate such plan or program.
Independent evaluation.At least once every five years, the Board shall authorize and fund from funds otherwise available to the Board, an independent evaluation of the effectiveness of the Order and the programs conducted by the Board pursuant to the Act. The Board shall submit to the Secretary, and make available to the public, the results of each periodic independent evaluation conducted under this paragraph.
Patents, copyrights, trademarks, inventions, product formulations, and publications.Any patents, copyrights, trademarks, inventions, product formulations, and publications developed through the use of funds received by the Board under this subpart shall be the property of the U.S. Government, as represented by the Board, and shall along with any rents, royalties, residual payments, or other income from the rental, sales, leasing, franchising, or other uses of such patents, copyrights, trademarks, inventions, publications, or product formulations, inure to the benefit of the Board, shall be considered income subject to the same fiscal, budget, and audit controls as other funds of the Board, and may be licensed subject to approval by the Secretary. Upon termination of this subpart, § 1217.83 shall apply to determine disposition of all such property.
Reports, Books, and Records
Reports.(a) Each manufacturer for the U.S. market will be required to provide periodically to the Board such information as the Board, with the approval of the Secretary, may require. Such information may include, but not be limited to:
(1)(i) For domestic manufacturers:
(A) The name, address and telephone number of the domestic manufacturer;
(B) The board feet of softwood lumber shipped within the United States;
(C) The board feet of softwood lumber for which assessments were paid; and
(D) The board feet of softwood lumber that was exported.
(ii) Such information shall accompany the collected payment of assessments on a quarterly basis specified in § 1217.52.
(2) For importers:
(i) The name, address and telephone number of the importer;
(ii) The board feet of softwood lumber imported;
(iii) The board feet of softwood lumber for which assessments were paid; and
(iv) The country of export.
(b) For importers who pay their assessments directly to the Board, such information shall accompany the payment of collected assessments within 30 calendar days after importation specified in § 1217.52.
Books and records.Each manufacturer for the U.S. market, including those exempt under § 1217.53, shall maintain any books and records necessary to carry out the provisions of this subpart and regulations issued thereunder, including such records as are necessary to verify any required reports. Domestic manufacturers who only export softwood lumber shall also retain such books and records. Such books and records must be made available during normal business hours for inspection by the Board's or Secretary's employees or agents. A manufacturer for the U.S. market must maintain the books and records for two years beyond the fiscal period to which they apply.
Confidential treatment.All information obtained from books, records, or reports under the Act, this subpart and the regulations issued thereunder shall be kept confidential by all persons, including all employees and former employees of the Board, all officers and employees and former officers and employees of contracting and subcontracting agencies or agreeing parties having access to such information. Such information shall not be available to Board members or other manufacturers for the U.S. market. Only those persons having a specific need for such information solely to effectively administer the provisions of this subpart shall have access to such information. Only such information so obtained as Start Printed Page 61024the Secretary deems relevant shall be disclosed by them, and then only in a judicial proceeding or administrative hearing brought at the direction, or at the request, of the Secretary, or to which the Secretary or any officer of the United States is a party, and involving this subpart. Nothing in this section shall be deemed to prohibit:
(a) The issuance of general statements based upon the reports of the number of persons subject to this subpart or statistical data collected therefrom, which statements do not identify the information furnished by any person; and
(b) The publication, by direction of the Secretary, of the name of any person who has been adjudged to have violated this part, together with a statement of the particular provisions of this part violated by such person.
Miscellaneous
Right of the Secretary.All fiscal matters, programs or projects, contracts, rules or regulations, reports, or other substantive actions proposed and prepared by the Board shall be submitted to the Secretary for approval.
Referenda.(a) Initial referendum. The Order shall not become effective unless the Order is approved by a majority of domestic manufacturers and importers voting in the referendum who also represent a majority of the volume of softwood lumber represented in the referendum who, during a representative period determined by the Secretary, have been engaged in the domestic manufacturing or importation of softwood lumber. A single entity who domestically manufactures and imports softwood lumber may cast one vote in the referendum.
(b) Subsequent referenda. The Secretary shall conduct subsequent referenda:
(1) For the purpose of ascertaining whether manufacturers for the U.S. market favor the amendment, continuation, suspension, or termination of the Order;
(2) Five years after this Order becomes effective and every five years thereafter, to determine whether softwood lumber manufacturers for the U.S. market favor the continuation of the Order. The Order shall continue if it is favored by a majority of domestic manufacturers and importers voting in the referendum who also represent a majority of the volume of softwood lumber represented in the referendum who, during a representative period determined by the Secretary, have been engaged in the domestic manufacturing or importation of softwood lumber;
(3) At the request of the Board established in this Order;
(4) At the request of 10 percent or more of the number of persons eligible to vote in a referendum as set forth under the Order; or
(5) At any time as determined by the Secretary.
Suspension or termination.(a) The Secretary shall suspend or terminate this part or subpart or a provision thereof, if the Secretary finds that this part or subpart or a provision thereof obstructs or does not tend to effectuate the purposes of the Act, or if the Secretary determines that this subpart or a provision thereof is not favored by persons voting in a referendum conducted pursuant to the Act.
(b) The Secretary shall suspend or terminate this subpart at the end of the fiscal period whenever the Secretary determines that its suspension or termination is favored by a majority of domestic manufacturers and importers voting in the referendum who also represent a majority of the volume represented in the referendum who, during a representative period determined by the Secretary, have been engaged in the domestic manufacturing or importation of softwood lumber.
(c) If, as a result of a referendum the Secretary determines that this subpart is not approved, the Secretary shall:
(1) Not later than one hundred and eighty (180) calendar days after making the determination, suspend or terminate, as the case may be, the collection of assessments under this subpart.
(2) As soon as practical, suspend or terminate, as the case may be, activities under this subpart in an orderly manner.
Proceedings after termination.(a) Upon termination of this subpart, the Board shall recommend to the Secretary up to nine of its members, representing all regions specified in § 1217.40(b), three of whom shall be importers and six of whom shall be domestic manufacturers, to serve as trustees for the purpose of liquidating the Board's affairs. Such persons, upon designation by the Secretary, shall become trustees of all of the funds and property then in the possession or under control of the Board, including claims for any funds unpaid or property not delivered, or any other existing claim at the time of such termination.
(b) The said trustees shall:
(1) Continue in such capacity until discharged by the Secretary;
(2) Carry out the obligations of the Board under any contracts or agreements entered into pursuant to the Order;
(3) From time to time account for all receipts and disbursements and deliver all property on hand, together with all books and records of the Board and trustees, to such person or person as the Secretary directs; and
(4) Upon request of the Secretary execute such assignments or other instruments necessary or appropriate to vest in such persons title and right to all of the funds, property, and claims vested in the Board or the trustees pursuant to the Order.
(c) Any person to whom funds, property, or claims have been transferred or delivered pursuant to the Order shall be subject to the same obligations imposed upon Board and upon the trustees.
(d) Any residual funds not required to defray the necessary expenses of liquidation shall be turned over to the Secretary to be disposed of, to the extent practical, to one or more softwood lumber industry organizations in the United States whose mission is generic softwood lumber promotion, research, and information programs.
Effect of termination or amendment.Unless otherwise expressly provided by the Secretary, the termination of this subpart or of any regulation issued pursuant thereto, or the issuance of any amendment to either thereof, shall not:
(a) Affect or waive any right, duty, obligation, or liability which shall have arisen or which may thereafter arise in connection with any provision of this subpart or any regulation issued thereunder;
(b) Release or extinguish any violation of this subpart or any regulation issued thereunder; or
(c) Affect or impair any rights or remedies of the United States, or of the Secretary or of any other persons, with respect to any such violation.
Personal liability.No member or employee of the Board shall be held personally responsible, either individually or jointly with others, in any way whatsoever, to any person for errors in judgment, mistakes, or other acts, either of commission or omission, as such member or employee, except for acts of dishonesty or willful misconduct.
Separability.If any provision of this subpart is declared invalid or the applicability of it to any person or circumstances is held Start Printed Page 61025invalid, the validity of the remainder of this subpart, or the applicability thereof to other persons or circumstances shall not be affected thereby.
Amendments.Amendments to this subpart may be proposed from time to time by the Board or any interested person affected by the provisions of the Act, including the Secretary.
OMB control numbers.The control numbers assigned to the information collection requirements by the Office of Management and Budget pursuant to the Paperwork Reduction Act of 1995, 44 U.S.C. chapter 35, are OMB control number 0505-0001 (Board nominee background statement) and OMB control number 0581-NEW.
Subpart B—[Reserved]
Start SignatureDated: September 22, 2010.
David R. Shipman,
Acting Administrator, Agricultural Marketing Service.
Footnotes
1. Spelter, H., D. McKeever, D. Toth, Profile 2009: Softwood Sawmills in the United States, USDA, p. 7.
Back to Citation2. Micklewright, J.T., Wood preservation statistics, American Wood Preservers Assocation, p. 25.
Back to Citation3. Spelter, McKeever and Toth, Profile 2009, p. 15.
Back to Citation4. Western Wood Products Association, 2008 Statistical Yearbook, p. 32.
Back to Citation5. U.S. Census Bureau, 2009, Construction, http://www.census.gov/mcd/.
Back to Citation6. Spelter, McKeever and Toth, Profile 2009, p. 2-5.
Back to Citation7. Spelter, McKeever and Toth, Profile 2009, p. 15.
Back to Citation8. Ibid., p. 15.
Back to Citation9. http://www.fas.usda.gov/gats;; accessed 5/1/10.
Back to Citation10. Spelter, McKeever and Toth, Profile 2009, p. 5-6.
Back to Citation11. U.S. Department of Labor, Bureau of Labor Statistics, 2009, Employment cost index, Washington, DC, http://data.bls.gov/PDQ/outside.jsp?survey=ci. Accessed 3/27/09.
Back to Citation12. Price data was obtained from Random Lengths Publications, Inc., and is a framing composite price that is designed as a broad measure of price movement in the lumber market. (http://www.randomlengths.com.)
Back to Citation13. The HTS numbers referred to in this discussion are as of January 1, 2008.
Back to Citation14. Spelter, McKeever and Toth, Profile 2009, p. 15.
Back to Citation15. Percentages were obtained from the American Lumber Standard Committee, Inc. (ALSC). The ALSC administers an accreditation program for the grademarking of lumber produced under the American Softwood Lumber Standard (Voluntary Product Standard 20).
Back to Citation16. Spelter, McKeever and Toth, Profile 2009, p. 2-5.
Back to Citation17. Spelter, H.D. McKeever, M. Alderman, Profile 2007: Softwood Sawmills in the United States and Canada, USDA, p. 10.
Back to Citation[FR Doc. 2010-24202 Filed 9-30-10; 8:45 am]
BILLING CODE 3410-02-P
Document Information
- Published:
- 10/01/2010
- Department:
- Agricultural Marketing Service
- Entry Type:
- Proposed Rule
- Action:
- Proposed rule.
- Document Number:
- 2010-24202
- Dates:
- Comments must be received by November 30, 2010. Pursuant to the Paperwork Reduction Act (PRA), comments on the information collection burden that would result from this proposal must be received by November 30, 2010.
- Pages:
- 61001-61025 (25 pages)
- Docket Numbers:
- Document Number AMS-FV-10-0015, PR-A1
- RINs:
- 0581-AD03: Softwood Lumber Research and Promotion Order, Establishing Order (FV-10-0015)
- RIN Links:
- https://www.federalregister.gov/regulations/0581-AD03/softwood-lumber-research-and-promotion-order-establishing-order-fv-10-0015-
- Topics:
- Administrative practice and procedure, Advertising, Labeling, Marketing agreements, Reporting and recordkeeping requirements
- PDF File:
- 2010-24202.pdf
- CFR: (57)
- 7 CFR 1217.1
- 7 CFR 1217.2
- 7 CFR 1217.3
- 7 CFR 1217.4
- 7 CFR 1217.5
- More ...