2016-24566. Carbon and Alloy Steel Cut-to-Length Plate From Austria, Belgium, Brazil, China, France, Germany, Italy, Japan, Korea, South Africa, Taiwan, and Turkey; Scheduling of the Final Phase of Countervailing Duty and Antidumping Duty ...  

  • Start Preamble Start Printed Page 70440

    AGENCY:

    United States International Trade Commission.

    ACTION:

    Notice.

    SUMMARY:

    The Commission hereby gives notice of the scheduling of the final phase of antidumping and countervailing duty investigation Nos. 701-TA-560-561 and 731-TA-1317-1328 (Final) pursuant to the Tariff Act of 1930 (“the Act”) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of imports of carbon and alloy steel cut-to-length plate from Austria, Belgium, Brazil, China, France, Germany, Italy, Japan, Korea, South Africa, Taiwan, and Turkey, provided for in subheadings 7208.40.30, 7208.40.60, 7208.51.00, 7208.51.00, 7208.52.00, 7208.53.00, 7208.90.00, 7210.70.30, 7210.90.90, 7211.13.00, 7211.14.00, 7211.19.15, 7211.19.20, 7211.19.45, 7211.19.60, 7211.19.75, 7211.90.00, 7212.40.10, 7212.40.50, 7212.50.00, 7214.10.00, 7214.30.00, 7214.91.00, 7225.11.00, 7225.19.00, 7225.40.11, 7225.40.30, 7225.40.51, 7225.40.70, 7225.99.00, 7226.11.10, 7226.11.90, 7226.19.10, 7226.19.90, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.15, 7226.91.25, 7226.91.50, 7226.91.70, 7226.91.80, and 7226.99.01, of the Harmonized Tariff Schedule of the United States.[1] The Department of Commerce has preliminarily determined such imports from China to be subsidized and such imports from Brazil, South Africa, and Turkey to be sold at less-than-fair-value.[2]

    DATES:

    Effective September 16, 2016.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Carolyn Carlson (202-205-3002), Office of Investigations, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission's TDD terminal on 202-205-1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202-205-2000. General information concerning the Commission may also be obtained by accessing its internet server (https://www.usitc.gov). The public record for these investigations may be viewed on the Commission's electronic docket (EDIS) at https://edis.usitc.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    Background.—The final phase of these investigations is being scheduled pursuant to sections 705(b) and 731(b) of the Tariff Act of 1930 (19 U.S.C. 1671d(b) and 1673d(b)), as a result of affirmative preliminary determinations by the Department of Commerce that certain benefits which constitute subsidies within the meaning of section 703 of the Act (19 U.S.C. 1671b) are being provided to manufacturers, producers, or exporters in China of carbon and alloy steel cut-to-length plate, and that such products from Brazil, South Africa, and Turkey are being sold in the United States at less than fair value within the meaning of section 733 of the Act (19 U.S.C. 1673b).[3] The investigations were requested in petitions filed on April 8, 2016, by ArcelorMittal USA LLC (Chicago, Illinois), Nucor Corporation (Charlotte, North Carolina), and SSAB Enterprises, LLC (Lisle, Illinois).

    For further information concerning the conduct of this phase of the investigations, hearing procedures, and rules of general application, consult the Commission's Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207).

    Participation in the investigations and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of these investigations as parties must file an entry of appearance with the Secretary to the Commission, as provided in section 201.11 of the Commission's rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigations need not file an additional notice of appearance during this final phase. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigations.

    Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to section 207.7(a) of the Commission's rules, the Secretary will make BPI gathered in the final phase of these investigations available to authorized applicants under the APO issued in the investigations, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the investigations. A party granted access to BPI in the preliminary phase of the investigations need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO.

    Staff report.—The prehearing staff report in the final phase of these investigations will be placed in the nonpublic record on November 15, 2016, and a public version will be issued thereafter, pursuant to section 207.22 of the Commission's rules.Start Printed Page 70441

    Hearing.—The Commission will hold a hearing in connection with the final phase of these investigations beginning at 10:00 a.m. on Wednesday, November 30, 2016, at the U.S. International Trade Commission Building. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before November 23, 2016. A nonparty who has testimony that may aid the Commission's deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should participate in a prehearing conference to be held on November 29, 2016, at the U.S. International Trade Commission Building, if deemed necessary. Oral testimony and written materials to be submitted at the public hearing are governed by sections 201.6(b)(2), 201.13(f), and 207.24 of the Commission's rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing.

    Written submissions.—Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of section 207.23 of the Commission's rules; the deadline for filing is November 22, 2016. Parties may also file written testimony in connection with their presentation at the hearing, as provided in section 207.24 of the Commission's rules, and posthearing briefs, which must conform with the provisions of section 207.25 of the Commission's rules. The deadline for filing posthearing briefs is December 7, 2016. In addition, any person who has not entered an appearance as a party to the investigations may submit a written statement of information pertinent to the subject of the investigations, including statements of support or opposition to the petition, on or before December 7, 2016. On December 22, 2016, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before December 28, 2016, but such final comments must not contain new factual information and must otherwise comply with section 207.30 of the Commission's rules. All written submissions must conform with the provisions of section 201.8 of the Commission's rules; any submissions that contain BPI must also conform with the requirements of sections 201.6, 207.3, and 207.7 of the Commission's rules. The Commission's Handbook on E-Filing, available on the Commission's Web site at https://edis.usitc.gov,, elaborates upon the Commission's rules with respect to electronic filing.

    Additional written submissions to the Commission, including requests pursuant to section 201.12 of the Commission's rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff.

    In accordance with sections 201.16(c) and 207.3 of the Commission's rules, each document filed by a party to the investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service.

    Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to section 207.21 of the Commission's rules.

    Start Signature

    Issued: October 5, 2016.

    By order of the Commission.

    Lisa R. Barton,

    Secretary to the Commission.

    End Signature End Supplemental Information

    Footnotes

    1.  For purposes of these investigations, the Department of Commerce (“Commerce”) has defined the subject merchandise as certain carbon and alloy steel hot-rolled or forged flat plate products not in coils, whether or not painted, varnished, or coated with plastics or other non-metallic substances (cut-to-length plate). Subject merchandise includes plate that is produced by being cut-to-length from coils or from other discrete length plate and plate that is rolled or forged into a discrete length. The products covered include (1) Universal mill plates (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm but not exceeding 1250 mm, and of a thickness of not less than 4 mm, which are not in coils and without patterns in relief), and (2) hot-rolled or forged flat steel products of a thickness of 4.75 mm or more and of a width which exceeds 150 mm and measures at least twice the thickness, and which are not in coils, whether or not with patterns in relief. The covered products described above may be rectangular, square, circular or other shapes and include products of either rectangular or non-rectangular cross-section where such non-rectangular cross-section is achieved subsequent to the rolling process, i.e., products which have been “worked after rolling”, (e.g., products which have been beveled or rounded at the edges). For a full description of Commerce's scope, see Certain Carbon and Alloy Steel Cur-to-Length Plate from Austria, Belgium, Brazil, the People's Republic of China, France, the Federal Republic of Germany, Italy, Japan, the Republic of Korea, the Republic of South Africa, Taiwan, and Turkey: Scope Comments Decision Memorandum for the Preliminary Determinations, U.S. International Trade Commission, September 6, 2016.

    Back to Citation

    2.  On September 13, 2016, Commerce published its preliminary affirmative countervailing duty determination on imports from China (81 FR 62871, September 13, 2016). On September 14, 2016, Commerce published its preliminary negative countervailing duty determination on imports from Korea (81 FR 63168, September 14, 2016). On September 16, 2016, Commerce notified the Commission regarding its preliminary affirmative antidumping duty determinations on imports from Brazil, South Africa, and Turkey (Letter to Chairman Irving A. Williamson from Christian Marsh, International Trade Administration, U.S. Department of Commerce, September 16, 2016).

    Back to Citation

    3.  See footnote 2.

    Back to Citation

    [FR Doc. 2016-24566 Filed 10-11-16; 8:45 am]

    BILLING CODE 7020-02-P

Document Information

Effective Date:
9/16/2016
Published:
10/12/2016
Department:
International Trade Commission
Entry Type:
Notice
Action:
Notice.
Document Number:
2016-24566
Dates:
Effective September 16, 2016.
Pages:
70440-70441 (2 pages)
Docket Numbers:
Investigation Nos. 701-TA-560-561 and 731-TA-1317-1328 (Final)
PDF File:
2016-24566.Pdf