[Federal Register Volume 59, Number 201 (Wednesday, October 19, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-25854]
[[Page Unknown]]
[Federal Register: October 19, 1994]
-----------------------------------------------------------------------
NUCLEAR REGULATORY COMMISSION
LLW Performance Assessment Workshop
AGENCY: Nuclear Regulatory Commission.
ACTION: Notice of Workshop.
-----------------------------------------------------------------------
SUMMARY: The Nuclear Regulatory Commission (NRC) staff plans to conduct
a Low-Level Radioactive Waste (LLW) Performance Assessment Workshop to
provide opportunity to comment on and discuss NRC's Draft Branch
Technical Position (BTP) on Performance Assessment for LLW Disposal
Facilities and Development of NRC's Test Case Simulations. The workshop
is jointly sponsored by NRC's Division of Waste Management and Office
of State Programs in cooperation with the Host State Technical
Coordinating Committee and the E-5 Committee of the Conference of
Radiation Control Program Directors, Inc. Participants include State
regulators, State authorities and developers, the Environmental
Protection Agency and the U.S. Department of Energy. Members of the
public attending will have opportunity to offer comments and
participate in discussions.
DATES: The workshop will take place from 8:00 a.m., Wednesday, November
16, 1994, and conclude at 4:30 p.m. on Thursday, November 17, 1994.
LOCATION: The workshop will be held at NRC's Auditorium, Two White
Flint North, 11545 Rockville Pike, MD 20852. Parking is limited. The
White Flint Metro stop is within one block.
CONTACT: For further information, contact Dr. Stephen N. Salomon,
Office of State Programs, U.S. Nuclear Regulatory Commission,
Washington, D.C. 20555, Telephone (301) 504-2368; FAX (301) 504-3502;
or INTERNET: SNSNRC.GOV.
SUPPLEMENTARY INFORMATION: The NRC staff published in January 1994 a
draft BTP on Performance Assessment for LLW Disposal Facilities and
copies were distributed for review by Agreement States. The BTP was
based on the U.S. Code of Federal Regulations, Title 10, Chapter 1,
Part 61 ``Licensing Requirement for Land Disposal of Radioactive
Waste,'' (Part 61) that specifies license requirements and performance
objectives for LLW disposal facilities. The guidance objective of the
BTP is to provide license applicants, licensees, States and compacts,
and the NRC staff with an acceptable strategy and methodology for
performing the technical analysis required to demonstrate compliance,
in the post-closure time frame, with the performance objective in Part
61, governing radiological protection of the public health and safety
and the environment. Participants in this workshop will discuss
regulatory and technical issues in the draft BTP and the development of
NRC's test case simulations Also, State regulatory and technical issues
will be discussed. To achieve a more successful workshop, participants
are encouraged to read the BTP before attending the workshop. Copies
can be obtained from Dr. Salomon.
The proposed agenda identifies the following discussion topics for
the morning of November 16: The Purposes and Goals of the LLW PA
Workshop, Overview of the BTP, Overview of PA Modeling Technical Issues
and Recommended Analytical Approaches, Open Discussion of Iterative PA
Process, Overview of PA Modeling Technical Issues and Recommended
Analytical Approaches, Open Discussion of Technical Issues, and
Environmental Protection Agency draft LLW Standard, 40 CFR 193. In the
afternoon, there will be sessions on Overview of Comments on
Preliminary draft of BTP and Revisions, Discussions of Regulatory and
Technical Issues in LLW PA [Treatment of Engineered Barriers; Role of
Site-Scenarios, Conceptual Models, and Data Needs; Uncertainty/
Sensitivity in Regulatory Decision Making; Timeframe for PA Analysis;
and Role of Performance Assessment in Demonstrating Compliance]. The
afternoon shows Panel Discussions of Regulatory and Technical Issues in
LLW PA.
On November 17 in the morning, sessions include the NLLWMP
technical assistance and computer modeling capability, Overview of NRC
Staff LLWPA Modeling Efforts [Description of Test Case and Integrated
Systems Model, Hardware/Software Requirements for LLWPA, Documenting
Results, Test Case Results and Discussions of Important Conclusions,
and Lessons Learned from Test case], PA Methodology Status Update,
Panel discussion with State regulators and develops [Infiltration,
Engineered Barriers, Source Term, Ground Water Transport and
Dosimetry], and DOE approach to LLW PA Modeling.
The afternoon includes Breakout sessions on Key Technical Issues in
Implementing the BTP [Infiltration, Source Term, Offsite transport and
dose, and Aspects of computer modeling], and Reports of Breakout chairs
on issues and approaches discussed. The Workshop will end with a Wrap
Up, Conclusions and Summary session.
The workshop is a public meeting and members of the public
attending will have opportunity to offer comments and participate in
discussions. A transcript of the workshop will be available for
inspection and copying for a fee, at the NRC Public Document Room, 2120
L Street, N.W. (Lower Level), Washington, D.C. 20555.
Dated at Rockville, Maryland this 12th day of October, 1994.
For the Nuclear Regulatory Commission.
Richard L. Bangart,
Director, Office of State Programs.
[FR Doc. 94-25854 Filed 10-18-94; 8:45 am]
BILLING CODE 7590-01-P-M