C0-19723. Energy Efficiency Program for Certain Commercial and Industrial Equipment: Test Procedures and Efficiency Standards for Commercial Air Conditioners and Heat Pumps

Correction

In proposed rule document 00-19723 beginning on page 48828 in the issue of Wednesday, August 9, 2000, make the following correction:

§431.271

[Corrected]

On page 48837 and 48838, in §431.271, Tables 1 and 2 should read as follows:

TABLE 1.—Minimum Cooling Efficiency Levels

Product	Category	Cooling capacity	Subcategory	Efficiency Level 1
Small Commercial Packaged Air Conditioning and Heating Equipment	Air Cooled, 3 Phase	<65,000 Btu/h	Split System Single Package	SEER = 10.0 SEER = 9.7
	Air Cooled	≥65,000 Btu/h and <135,000 Btu/h	All	EER = 8.9
	Water Cooled Evaporatively Cooled, and Water-Source	<65,000 Btu/h ≥65,000 Btu/h and <135,000 Btu/h	All All	EER = 9.3 EER = 10.5
Large Commercial Packaged Air Conditioning and Heating Equipment	Air Cooled	≥135,000 Btu/h and <240,000 Btu/h	All	EER = 8.5
	Water-Cooled, and Evaporatively Cooled	≥135,000 Btu/h and <240,000 Btu/h	All	EER = 9.6
Packaged Terminal Air Conditioners and Heat Pumps	All	<7,000 Btu/h ≥7,000 Btu/h and ≤15,000 Btu/h >15,000 Btu/h	All	EER = 8.88 EER = 10.0−(0.16 × capacity [in thousands of Btu/h at 95° outdoor dry-bulb temperature]) EER = 7.6
1 All EER values must be rated at 95°F outdoor dry-bulb temperature for air-cooled products and evaporatively-cooled products and at 85°F entering water temperature for water-source and water-cooled products.

TABLE 2.—MINIMUM HEATING EFFICIENCY LEVELS

Product	Category	Cooling capacity	Subcategory	Efficiency Level 2
Small Commercial Packaged Air Conditioning and Heating Equipment	Air Cooled, 3 Phase	<65,000 Btu/h	Split System Single Package	HSPF = 6.8 HSPF = 6.6
	Water-Source	<135,000 Btu/h	Split System and Single Package	COP = 3.8
	Air Cooled	≥65,000 Btu/h and <135,000 Btu/h	All	COP = 3.0
Large Commercial Packaged Air Conditioning and Heating Equipment	Air Cooled	≥135,000 Btu/h and <240,000 Btu/h	Split System and Single Package	COP = 2.9
Packaged Terminal Heat Pumps	All	All	All	COP = 1.3+(0.16 × the applicable minimum cooling EER prescribed in Table 1—Minimum Cooling Efficiency Levels)
2 All COP values must be rated at 47°F outdoor dry-bulb temperature for air-cooled products and evaporatively-cooled products and at 70°F entering water temperature for water-source products.

Correction

In rule document 00-25599 beginning on page 60101 in the issue of Tuesday, October 10, 2000, make the following corrections:

§52.1770

[Corrected]

1. On page 60102, in §52.1770 (c), in the table, in the section “Subchapter 2D—Air Pollution Control Requirements”, in the first line, the column for “State effective date” should read “1/15/98” and the column for “EPA approval date” should read “11/10/99”.

2. On page 60103, in the same section of the table, in the last line, in the column for “State effective date”, “Annual Emissions Reporting” should read “1/15/98”. The column for “EPA approval date” should read “11/10/99” and the column for “Comments” should read “*”.

Correction

In notice document 00-25579 beginning on page 59463, in the issue of Thursday, October 5, 2000, make the following correction:

On page 59463, in the third column, in the seventh line from the bottom, “ Sec. 3, SE 1/4 NW 1/2” should read “ Sec. 3, SE 1/4 NW 1/4 ”.