94-26240. Airworthiness Directives; Consolidated Aeronautics Lake Model 250 Airplanes Equipped With a Bendix/King KFC 150 Automatic Flight Control System  

  • [Federal Register Volume 59, Number 205 (Tuesday, October 25, 1994)]
    [Unknown Section]
    [Page 0]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 94-26240]
    
    
    [[Page Unknown]]
    
    [Federal Register: October 25, 1994]
    
    
    -----------------------------------------------------------------------
    
    
    DEPARTMENT OF TRANSPORTATION
    14 CFR Part 39
    
    [Docket No. 94-CE-21-AD; Amendment 39-9051; AD 94-22-02]
    
     
    
    Airworthiness Directives; Consolidated Aeronautics Lake Model 250 
    Airplanes Equipped With a Bendix/King KFC 150 Automatic Flight Control 
    System
    
    AGENCY: Federal Aviation Administration, DOT.
    
    ACTION: Final rule; request for comments.
    
    -----------------------------------------------------------------------
    
    SUMMARY: This amendment adopts a new airworthiness directive (AD) that 
    applies to Consolidated Aeronautics Lake Model 250 airplanes equipped 
    with a Bendix/King KFC 150 automatic flight control system. This action 
    requires pulling the ``A/P'' and ``TRIM'' circuit breakers, and 
    fabricating and installing a placard that specifies the use of manual 
    trim only. An incident where the elevator trim spring lever of a Lake 
    Model 250 airplane failed to return to neutral following KFC 150 
    automatic flight control system autotrim operation prompted this 
    action. The resulting mistrim overpowered the autopilot and caused the 
    airplane to deviate from its flight path. The actions specified by this 
    AD are intended to prevent automatic flight control system malfunctions 
    caused by failure of the elevator autotrim to disengage, which could 
    result in flight path deviations.
    
    DATES: Effective November 4, 1994.
        Comments for inclusion in the Rules Docket must be received on or 
    before December 30, 1994.
    
    ADDRESSES: Submit comments in triplicate to the Federal Aviation 
    Administration (FAA), Central Region, Office of the Assistant Chief 
    Counsel, Attention: Rules Docket 94-CE-21-AD, Room 1558, 601 E. 12th 
    Street, Kansas City, Missouri 64106.
        Information that relates to this AD may be examined at the Federal 
    Aviation Administration (FAA), Central Region, Office of the Assistant 
    Chief Counsel, Attention: Rules Docket 94-CE-21-AD, Room 1558, 601 E. 
    12th Street, Kansas City, Missouri 64106.
    
    FOR FURTHER INFORMATION CONTACT: Mr. Roger A. Souter, Aerospace 
    Engineer, Wichita Aircraft Certification Office, 1801 Airport Road, 
    Room 100, Mid-Continent Airport, Wichita, Kansas 67209; telephone (316) 
    946-4134; facsimile (316) 946-4407.
    
    SUPPLEMENTARY INFORMATION: The FAA has received a report where the 
    Bendix/King KFC 150 automatic flight control system malfunctioned 
    because the elevator trim spring lever on a Consolidated Aeronautics 
    Lake Model 250 airplane failed to return to neutral following KFC 150 
    automatic flight control system autotrim operation. This resulted in 
    the airplane deviating from its flight path.
        This KFC 150 automatic flight control system incorporates a 
    mechanical attachment to the basic airplane's trim system; the basic 
    airplane in turn has a pilot-actuated spring-loaded lever that controls 
    a hydraulic actuator. During the original type certification efforts of 
    the KFC 150 automatic flight control system, a modification was 
    incorporated that prevents the engage solenoid for the elevator 
    autotrim servo from remaining occasionally engaged because of an 
    opposing forced created by the spring. The modification provided a 
    design where the spring would back-drive the servo motor, relieve the 
    spring tension, and allow the solenoid to disengage; the solenoid 
    engages once autotrim begins to run, and disengages when autotrim stops 
    running.
        In the referenced incident, the spring lever of the airplane failed 
    to return to neutral and the pitch trim continued to run while the KFC 
    150 automatic flight control system was on autopilot with autotrim 
    operation. The resulting mistrim overpowered the autopilot and caused 
    the airplane to deviate from the flight path. The pilot recognized the 
    problem, disengaged the autopilot, and took control of the airplane. 
    Initial investigation of the incident reveals that the elevator 
    autotrim servo did not disengage because of the loads imposed by the 
    basic airplane's spring lever.
        While testing and additional investigation continues in developing 
    a modification to solve this problem, the FAA has determined that, in 
    the interim, this Bendix/King KFC 150 automatic flight control system 
    should not be utilized on Consolidated Aeronautics Lake Model 250 
    airplanes.
        After examining the circumstances and reviewing all available 
    information related to the incidents described above, the FAA has 
    determined that AD action should be taken in order to prevent automatic 
    flight control system malfunctions caused by failure of the elevator 
    autotrim to disengage, which could result in flight path deviations.
        Since an unsafe condition has been identified that is likely to 
    exist or develop in other Consolidated Aeronautics Lake Model 250 
    airplanes of the same type design that are equipped with a Bendix/King 
    KFC 150 automatic flight control system, this AD requires pulling the 
    ``A/P'' and ``TRIM'' circuit breakers, and fabricating and installing a 
    placard that specifies the use of manual trim only.
        Since a situation exists that requires the immediate adoption of 
    this regulation, it is found that notice and opportunity for public 
    prior comment hereon are impracticable, and that good cause exists for 
    making this amendment effective in less than 30 days.
    
    Comments Invited
    
        Although this action is in the form of a final rule that involves 
    requirements affecting immediate flight safety and, thus, was not 
    preceded by notice and opportunity to comment, comments are invited on 
    this rule. Interested persons are invited to comment on this rule by 
    submitting such written data, views, or arguments as they may desire. 
    Communications should identify the Rules Docket number and be submitted 
    in triplicate to the address specified above. All communications 
    received on or before the closing date for comments will be considered, 
    and this rule may be amended in light of the comments received. Factual 
    information that supports the commenter's ideas and suggestions is 
    extremely helpful in evaluating the effectiveness of the AD action and 
    determining whether additional rulemaking action would be needed.
        Comments are specifically invited on the overall regulatory, 
    economic, environmental, and energy aspects of the rule that might 
    suggest a need to modify the rule. All comments submitted will be 
    available, both before and after the closing date for comments, in the 
    Rules Docket for examination by interested persons. A report that 
    summarizes each FAA-public contact concerned with the substance of this 
    AD will be filed in the Rules Docket.
        Commenters wishing the FAA to acknowledge receipt of their comments 
    submitted in response to this notice must submit a self-addressed, 
    stamped postcard on which the following statement is made: ``Comments 
    to Docket No. 94-CE-21-AD.'' The postcard will be date stamped and 
    returned to the commenter.
        The regulations adopted herein will not have substantial direct 
    effects on the States, on the relationship between the national 
    government and the States, or on the distribution of power and 
    responsibilities among the various levels of government. Therefore, in 
    accordance with Executive Order 12612, it is determined that this final 
    rule does not have sufficient federalism implications to warrant the 
    preparation of a Federalism Assessment.
        The FAA has determined that this regulation is an emergency 
    regulation and that must be issued immediately to correct an unsafe 
    condition in aircraft, and is not a ``significant regulatory action'' 
    under Executive Order 12866. It has been determined further that this 
    action involves an emergency regulation under DOT Regulatory Policies 
    and Procedures (44 FR 11034, February 26, 1979). If it is determined 
    that this emergency regulation otherwise would be significant under DOT 
    Regulatory Policies and Procedures, a final regulatory evaluation will 
    be prepared and placed in the Rules Docket (otherwise, an evaluation is 
    not required). A copy of it, if filed, may be obtained from the Rules 
    Docket.
    
    List of Subjects in 14 CFR Part 39
    
        Air transportation, Aircraft, Aviation safety, Safety.
    
    Adoption of the Amendment
    
        Accordingly, pursuant to the authority delegated to me by the 
    Administrator, the Federal Aviation Administration amends part 39 of 
    the Federal Aviation Regulations (14 CFR part 39) as follows:
    
    PART 39--AIRWORTHINESS DIRECTIVES
    
        1. The authority citation for part 39 continues to read as follows:
    
        Authority: 49 U.S.C. App. 1354(a), 1421 and 1423; 49 U.S.C. 
    106(g); and 14 CFR 11.89.
    
    
    Sec. 39.13  [Amended]
    
        2. Section 39.13 is amended by adding a new airworthiness directive 
    to read as follows:
    
    94-22-02 Consolidated Aeronautics: Amendment 39-9051; Docket No. 94-
    CE-21-AD.
    
        Applicability: Lake Model 250 airplanes (all serial numbers), 
    certificated in any category, that are equipped with a Bendix/King 
    KFC 150 automatic flight control system.
        Compliance: Required within the next 10 hours time-in-service 
    after the effective date of this AD, unless already accomplished.
        To prevent automatic flight control system malfunctions caused 
    by failure of the elevator autotrim to disengage, which could result 
    in flight path deviations, accomplish the following:
        (a) Pull the two circuit breakers, one marked ``A/P'' and the 
    other marked ``TRIM'', and attach a collar or tie-wrap to them to 
    prevent resetting.
        (b) Fabricate a placard with the words: ``Use manual trim 
    only.'', and install this placard on the instrument panel within the 
    pilot's clear view.
        (c) Special flight permits may be issued in accordance with 
    Secs. 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 
    21.197 and 21.199) to operate the airplane to a location where the 
    requirements of this AD can be accomplished.
        (d) An alternative method of compliance or adjustment of the 
    initial or repetitive compliance times that provides an equivalent 
    level of safety may be approved by the Manager, Wichita Aircraft 
    Certification Office (ACO), 1801 Airport Road, Room 100, Mid-
    Continent Airport, Wichita, Kansas 67209. The request shall be 
    forwarded through an appropriate FAA Maintenance Inspector, who may 
    add comments and then send it to the Manager, Wichita ACO.
    
        Note: Information concerning the existence of approved 
    alternative methods of compliance with this AD, if any, may be 
    obtained from the Wichita ACO.
    
        (e) Information related to this AD may be examined at the FAA, 
    Central Region, Office of the Assistant Chief Counsel, Room 1558, 
    601 E. 12th Street, Kansas City, Missouri 64106.
        (f) This amendment (39-9051) becomes effective on November 4, 
    1994.
    
        Issued in Kansas City, Missouri, on October 18, 1994.
    John R. Colomy,
    Acting Manager, Small Airplane Directorate, Aircraft Certification 
    Service.
    [FR Doc. 94-26240 Filed 10-24-94; 8:45 am]
    BILLING CODE 4910-13-U
    
    
    

Document Information

Effective Date:
11/4/1994
Published:
10/25/1994
Department:
Transportation Department
Entry Type:
Uncategorized Document
Action:
Final rule; request for comments.
Document Number:
94-26240
Dates:
Effective November 4, 1994.
Pages:
0-0 (1 pages)
Docket Numbers:
Federal Register: October 25, 1994, Docket No. 94-CE-21-AD, Amendment 39-9051, AD 94-22-02
CFR: (1)
14 CFR 39.13