2013-25607. Welded Large Diameter Line Pipe From Japan: Continuation of Antidumping Duty Order

AGENCY:

Enforcement and Compliance, Formerly Import Administration, International Trade Administration, Department of Commerce.

SUMMARY:

As a result of the determinations by the Department of Commerce (the Department) and the U.S. International Trade Commission (USITC) that revocation of the antidumping duty order on welded large diameter line pipe (LDLP) from Japan would likely lead to continuation or recurrence of dumping and material injury to an industry in the United States, the Department is publishing a notice of continuation of this antidumping duty order.

DATES:

Effective Date: October 29, 2013.

FOR FURTHER INFORMATION CONTACT:

John Drury or Angelica Mendoza, AD/CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: [phone] and [phone], respectively.

SUPPLEMENTARY INFORMATION:

Background

On December 6, 2001, the Department published the antidumping duty order on LDLP from Japan.^[1] On October 1, 2012, the Department initiated the second sunset review of the antidumping duty order on LDLP from Japan pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act).^[2]

As a result of this sunset review, the Department determined that revocation of the antidumping duty order on LDLP from Japan would likely lead to continuation or recurrence of dumping and, therefore, notified the USITC of the magnitude of the margins likely to prevail should the order be revoked.^[3]

On October 2, 2013, the USITC determined, pursuant to section 751(c) of the Act, that revocation of the antidumping duty order on LDLP from Japan would be likely to lead to a continuation or recurrence of material injury to an industry in the United Sates within a reasonably foreseeable time.^[4]

Scope of the Order

The product covered by this order is certain welded carbon and alloy line pipe, of circular cross section and with an outside diameter greater than 16 inches, but less than 64 inches, in diameter, whether or not stenciled. This product is normally produced according to American Petroleum Institute (API) specifications, including Grades A25, A, B, and X grades ranging from X42 to X80, but can also be produced to other specifications. The product currently is classified under U.S. Harmonized Tariff Schedule (HTSUS) item numbers 7305.11.10.30, 7305.11.10.60, 7305.11.50.00, 7305.12.10.30, 7305.12.10.60, 7305.12.50.00, 7305.19.10.30. 7305.19.10.60, and 7305.19.50.00. Although the HTSUS item numbers are provided for convenience and customs purposes, the written description of the scope is dispositive. Specifically not included within the scope of this investigation is American Water Works Association (AWWA) specification water and sewage pipe and the following size/grade combinations; of line pipe:

Having an outside diameter greater than or equal to 18 inches and less than or equal to 22 inches, with a wall thickness measuring 0.750 inch or greater, regardless of grade.

Having an outside diameter greater than or equal to 24 inches and less than 30 inches, with wall thickness measuring greater than 0.875 inches in grades A, B, and X42, with wall thickness measuring greater than 0.750 inches in grades X52 through X56, and with wall thickness measuring greater than 0.688 inches in grades X60 or greater.

Having an outside diameter greater than or equal to 30 inches and less than 36 inches, with wall thickness measuring greater than 1.250 inches in grades A, B, and X42, with wall thickness measuring greater than 1.000 inches in grades X52 through X56, and with wall thickness measuring greater than 0.875 inches in grades X60 or greater.

Having an outside diameter greater than or equal to 36 inches and less than 42 inches, with wall thickness measuring greater than 1.375 inches in grades A, B, and X42, with wall thickness measuring greater than 1.250 inches in grades X52 through X56, and with wall thickness measuring greater than 1.125 inches in grades X60 or greater.

Having an outside diameter greater than or equal to 42 inches and less than 64 inches, with a wall thickness measuring greater than 1.500 inches in grades A, B, and X42, with wall thickness measuring greater than 1.375 inches in grades X52 through X56, and with wall thickness measuring greater than 1.250 inches in grades X60 or greater.

Having an outside diameter equal to 48 inches, with a wall thickness measuring 1.0 inch or greater, in grades X-80 or greater.

In API grades X80 or above, having an outside diameter of 48 inches to and including 52 inches, and with a wall thickness of 0.90 inch or more.

In API grades X100 or above, having an outside diameter of 48 inches to and including 52 inches, and with a wall thickness of 0.54 inch or more.

An API grade X-80 having an outside diameter of 21 inches and wall thickness of 0.625 inch or more.

Continuation of the Order

As a result of the determinations by the Department and the USITC that revocation of the antidumping duty order on LDLP from Japan would be likely to lead to continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, the Department hereby orders the continuation of the antidumping duty order on LDLP from Japan.

U.S. Customs and Border Protection will continue to collect antidumping duty cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of this order will be the date of publication in the Federal Register of this notice of continuation. Pursuant to section 751(c)(2) of the Act, the Department intends to initiate the next sunset review of this order not later than 30 days prior to the fifth anniversary of the effective date of continuation.

This five-year (sunset) review and this notice are in accordance with section 751(c) of the Act and published pursuant to section 777(i)(1) of the Act.

Dated: October 23, 2013.

Paul Piquado,

Assistant Secretary for Enforcement and Compliance.

Footnotes

1.  See Antidumping Duty Order: Welded Large Diameter Line Pipe from Japan, 66 FR 63368 (December 6, 2001).

2.  See Initiation of Five-Year (“Sunset”) Review, 77 FR 59897 (October 1, 2012).

3.  See Welded Large Diameter Line Pipe From Japan: Final Results of the Expedited Second Sunset Review of the Antidumping Duty Order, 78 FR 10134 (February 13, 2013).

4.  See LDLP from Japan, 78 FR 60897 (October 2, 2013), and USITC Publication 4427 (September 2013). As explained in the memorandum from the Assistant Secretary for Enforcement and Compliance, the Department has exercised its discretion to toll deadlines for the duration of the closure of the Federal Government from October 1, through October 16, 2013. See Memorandum for the Record from Paul Piquado, Assistant Secretary for Enforcement and Compliance, “Deadlines Affected by the Shutdown of the Federal Government” (October 18, 2013). Therefore, all deadlines in this segment of the proceeding have been extended by 16 days. As a result, this notice of continuation of the order is timely.