95-24787. The Joint EPA/CMA Guidance Document on Section 608 Leak Repair Amendment
[Federal Register Volume 60, Number 193 (Thursday, October 5, 1995)]
[Notices]
[Pages 52181-52182]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-24787]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[FRL-5312-5]
The Joint EPA/CMA Guidance Document on Section 608 Leak Repair
Amendment
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice of availability of the Compliance Guidance for
Industrial Process Refrigeration Leak Repair Requirements under Section
608 of the Clean Air Act.
-----------------------------------------------------------------------
SUMMARY: The Environmental Protection Agency announces the availability
of a guidance document that was developed jointly by EPA and the
Chemical Manufacturers Association (CMA) to provide guidance on the
recently promulgated amendments to the leak repair requirements
promulgated under Section 608 of the Clean Air Act Amendments of 1990.
The amendment was promulgated in 60 FR 40420 on August 8, 1995. This
guidance is the first document developed jointly by EPA and industry to
provide compliance assistance on a newly promulgated rule on or near
the effective date. The intent of this joint project is to provide
guidance and compliance assistance to the regulated community before
the requirements in
[[Page 52182]]
the rule become effective. Through this effort, EPA and CMA hope to
facilitate early and substantial compliance through the development of
timely guidance.
This document is developed for the corporate and plant personnel
who would either oversee or perform activities that are affected by the
amendment. The guidance document contains eight stand-alone modules
that include timelines and questions/answers. The guidance also
includes two flow diagrams summarizing the new requirements.
An open process was used to develop this guidance. Both EPA and CMA
invited several environmental groups and unions that may have interests
in this amendment to participate on the workgroup or review documents
developed by the workgroup. In addition, the Agency was also careful to
ensure that the development of the guidance did not affect the
rulemaking process. To accomplish this, the draft guidance was
developed based on the language in the proposed rule and discussions on
any potential changes in the final rule were strictly prohibited. Once
the rule was promulgated, the draft guidance was amended to reflect the
final rule.
DATES: This document will be available to the public after September
27, 1995.
ADDRESSES: Copies of the Section 608 Leak Repair Amendment Guidance
Document EPA300-B-95-010 may be obtained by calling the Stratospheric
Protection Hotline at (1-800-296-1996) from 9 a.m. to 4 p.m., Monday
through Friday, except on Federal holidays.
FOR FURTHER INFORMATION CONTACT: For general information contact the
Stratospheric Protection Hotline at (800) 296-1996. For information on
specific aspects of the guidance document, contact Tracy Back at (202)
564-7076 or Emily Chow at (202) 564-7071, Chemical, Commercial, and
Municipal Services Division (2224-A), U.S. Environmental Protection
Agency, 401 M Street SW, Washington, DC 20460.
Dated: September 29, 1995.
Richard Colbert,
Acting Director, Office of Compliance.
[FR Doc. 95-24787 Filed 10-4-95; 8:45 am]
BILLING CODE 6560-50-P
Document Information
- Published:
- 10/05/1995
- Department:
- Environmental Protection Agency
- Entry Type:
- Notice
- Action:
- Notice of availability of the Compliance Guidance for Industrial Process Refrigeration Leak Repair Requirements under Section 608 of the Clean Air Act.
- Document Number:
- 95-24787
- Dates:
- This document will be available to the public after September 27, 1995.
- Pages:
- 52181-52182 (2 pages)
- Docket Numbers:
- FRL-5312-5
- PDF File:
-
95-24787.pdf