2017-21603. Curtis-Strauss, LLC: Grant of Expansion of Recognition and Modification of NRTL Program's List of Appropriate Test Standards

AGENCY:

Occupational Safety and Health Administration (OSHA), Labor.

ACTION:

Notice.

SUMMARY:

In this notice, OSHA announces its final decision to expand the scope of recognition for Curtis-Strauss, LLC., as a Nationally Recognized Testing Laboratory (NRTL). Additionally, OSHA announces its final decision to add a new test standard to the NRTL Program's List of Appropriate Test Standards.

DATES:

The expansion of the scope of recognition becomes effective on October 6, 2017.

FOR FURTHER INFORMATION CONTACT:

Information regarding this notice is available from the following sources:

Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor, telephone: [phone]; email: [e-mail].

General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, telephone: [phone]; email: [e-mail]. OSHA's Web page includes information about the NRTL Program (see http://www.osha.gov/​dts/​otpca/​nrtl/​index.html).

SUPPLEMENTARY INFORMATION:

I. Notice of Final Decision

OSHA hereby gives notice of the expansion of the scope of recognition of Curtis-Strauss, LLC (CSL) as a NRTL. CSL's expansion covers the addition of one test standard to its scope of recognition.

OSHA recognition of a NRTL signifies that the organization meets the requirements specified by 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition and is not a delegation or grant of government authority. As a result of recognition, employers may use products properly approved by the NRTL to meet OSHA standards that require testing and certification of the products.

The Agency processes applications by a NRTL for initial recognition, or for expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the Agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides its preliminary finding and, in the second notice, the Agency provides its final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational Web page for each NRTL that details its scope of recognition. These pages are available from the Agency's Web site at: http://www.osha.gov/​dts/​otpca/​nrtl/​index.html.

CSL submitted an application, dated April 7, 2016 (OSHA-2009-0026-0072), to expand its recognition to include one additional test standard, which would also be added to the NRTL Program's List of Appropriate Test Standards. OSHA staff performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.

OSHA published the preliminary notice announcing CSL's expansion application in the Federal Register on May 23, 2017 (82 FR 23611). The Agency requested comments by June 7, 2017, but it received no comments in response to this notice. OSHA now is proceeding with this final notice to grant expansion of CSL's scope of recognition.

To obtain or review copies of all public documents pertaining to CSL's application, go to: www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-3655, Washington, DC 20210. Docket No. OSHA-2009-0026 contains all materials in the record concerning CSL's recognition.

II. Final Decision and Order

OSHA staff examined CSL's expansion application, its capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that CSL meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the specified limitation and conditions listed below. OSHA, therefore, is proceeding with this final notice to grant CSL's scope of recognition. OSHA limits the expansion of CSL's recognition to testing and certification of products for demonstration of conformance to the test standard listed in Table 1 below.

Table 1—Appropriate Test Standard for Inclusion in CSL's NRTL Scope of Recognition

Test standard	Test standard title
UL 61010-2-010	Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use—Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials.

Additionally, Table 2, below, lists the test standard new to the NRTL Program's List of Appropriate Test Standards. The Agency evaluated the standard to (1) verify it represents product categories for which OSHA requires certification by a NRTL, (2) verify the documents represent end products and not components, and (3) verify the documents define safety test specifications (not installation or operational performance specifications). Based on this evaluation, OSHA finds that this is an appropriate test standard and has added this standard to the NRTL Program's List of Appropriate Test Standards.

Table 2—Test Standard OSHA Is Adding to the NRTL Program's List of Appropriate Test Standards

Test standard	Test standard title
UL 61010-2-010	Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use—Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials.

OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products.

The American National Standards Institute (ANSI) may approve the test standard listed above as an American National Standard. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, paragraph XIV), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.

A. Conditions

In addition to those conditions already required by 29 CFR 1910.7, CSL must abide by the following conditions of recognition:

1. CSL must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s);

2. CSL must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and

3. CSL must continue to meet the requirements for recognition, including all previously published conditions on CSL's scope of recognition, in all areas for which it has recognition.

Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of CSL, subject to the limitation and conditions specified above.

Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW., Washington, DC 20210, authorized the preparation of this notice. Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7.

Signed at Washington, DC, on October 2, 2017.

Loren Sweatt,

Deputy Assistant Secretary of Labor for Occupational Safety and Health.