[Federal Register Volume 61, Number 197 (Wednesday, October 9, 1996)]
[Notices]
[Page 52978]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-25902]
-----------------------------------------------------------------------
NUCLEAR REGULATORY COMMISSION
[NUREG-0700, Rev. 1]
Notice of Issuance and Availability; Correction
AGENCY: Nuclear Regulatory Commission.
ACTION: Notice of issuance and availability; Correction.
-----------------------------------------------------------------------
SUMMARY: This document corrects a notice appearing in the Federal
Register on September 13, 1996 (61 FR 48513), that announces the
availability of Revision 1 to NUREG-0700, ``Human-System Interface
Design Review Guideline.'' This action is necessary to reflect the
appropriate information concerning the availability of a final NUREG
publication.
SUPPLEMENTARY INFORMATION: In the Federal Register of September 13,
1996, in the tenth line of the third column, remove the language,
``Requests for single copies of NUREGs (which may be reproduced) should
be made in writing to the U.S. Nuclear Regulatory Commission,
Washington, DC 20555, Attention: Distribution and Mail Services
Section. Telephone requests cannot be accommodated.'', and insert in
its place the following language: ``Copies of NUREGS may be purchased
from the Superintendent of Documents, U.S. Government Printing Office,
P.O. Box 37082, Washington, DC 20402-9328. Copies are also available
from the National Technical Information Service, 5285 Port Royal Road,
Springfield, VA 22161. A copy is available for inspection and/or
copying in the NRC Public Document Room, 2120 L Street, NW. (Lower
Level), Washington, DC.''
Dated at Rockville, Maryland, this 4th day of October 1996.
For the Nuclear Regulatory Commission.
Michael T. Lesar,
Chief, Rules Review Section, Rules Review and Directives Branch,
Division of Freedom of Information and Publications Services, Office of
Administration.
[FR Doc. 96-25902 Filed 10-8-96; 8:45 am]
BILLING CODE 7590-01-P