96-29877. Small Business Size Standards; Waiver of the Nonmanufacturer Rule
[Federal Register Volume 61, Number 227 (Friday, November 22, 1996)]
[Proposed Rules]
[Pages 59382-59383]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-29877]
-----------------------------------------------------------------------
SMALL BUSINESS ADMINISTRATION
13 CFR Part 121
Small Business Size Standards; Waiver of the Nonmanufacturer Rule
AGENCY: Small Business Administration.
ACTION: Notice of intent to waive the Nonmanufacturer Rule for 8mm Tri-
Deck Airborne Recorder (ruggedized).
-----------------------------------------------------------------------
SUMMARY: The Small Business Administration (SBA) is considering
[[Page 59383]]
granting a waiver of the Nonmanufacturer Rule for 8mm Tri-Deck Airborne
Recorder (ruggedized). The basis for a waiver of the Nonmanufacturer
Rule for this product is that there are no small business manufacturers
or processors available to supply these products to the Federal
Government. The effect of a waiver would be to allow an otherwise
qualified Nonmanufacturer to supply other than the product of a
domestic small business manufacturer or processor on a Federal contract
set aside for small businesses or awarded through the SBA 8(a) Program.
The purpose of this notice is to solicit comments and potential source
information from interested parties.
DATES: Comments and sources must be submitted on or before November 29,
1996.
ADDRESSES: David Wm. Loines, Procurement Analyst, U.S. Small Business
Administration, 409 3rd Street S.W., Washington, DC 20416, Tel: (202)
205-6475.
FOR FURTHER INFORMATION CONTACT: David Wm. Loines, Tel: (202) 205-6475.
SUPPLEMENTARY INFORMATION: Public Law 100-656, enacted on November 15,
1988, incorporated into the Small Business Act the previously existing
regulation that recipients of Federal contracts set-aside for small
businesses or the SBA 8(a) Program procurement must provide the product
of a small business manufacturer or processor, if the recipient is
other than the actual manufacturer or processor. This requirement is
commonly referred to as the Nonmanufacturer Rule. The SBA regulations
imposing this requirement are found at 13 CFR 121.406(b). Section
303(h) of the law provides for waiver of this requirement by SBA for
any ``class of products'' for which there are no small business
manufacturers or processors in the Federal market. To be considered
available to participate in the Federal market on these classes of
products, a small business manufacturer must have submitted a proposal
for a contract solicitation or received a contract from the Federal
Government within the last 24 months. The SBA defines ``class of
products'' based on two coding systems. The first is the Office of
Management and Budget Standard Industrial Classification Manual (SIC).
The second is the Product and Service Code (PSC) established by the
Federal Procurement Data System.
The Small Business Administration is currently processing a request
for a waiver of the Nonmanufacturer Rule for 8mm Tri-Deck Airborne
Recorder (ruggedized) (SIC 3861, PSC 5836) and invites the public to
comment or provide information on potential small business
manufacturers for this product.
In an effort to identify potential small business manufacturers,
the SBA has searched the Procurement Automated Source System (PASS) and
Thomas Register, and the SBA will publish a notice in the Commerce
Business Daily. The public is invited to comment or provide source
information to SBA on the proposed waiver of the Nonmanufacturer Rule
for this class of products.
Dated: November 4, 1996.
Judith A. Roussel,
Associate Administrator for Government Contracting.
[FR Doc. 96-29877 Filed 11-21-96; 8:45 am]
BILLING CODE 8025-01-P
Document Information
- Published:
- 11/22/1996
- Department:
- Small Business Administration
- Entry Type:
- Proposed Rule
- Action:
- Notice of intent to waive the Nonmanufacturer Rule for 8mm Tri- Deck Airborne Recorder (ruggedized).
- Document Number:
- 96-29877
- Dates:
- Comments and sources must be submitted on or before November 29, 1996.
- Pages:
- 59382-59383 (2 pages)
- PDF File:
-
96-29877.pdf
- CFR: (1)
- 13 CFR 121