05-23170. Office of Hazardous Materials Safety; Notice of Applications for Modification of Exemption  

  • Start Preamble

    AGENCY:

    Pipeline and Hazardous Materials Safety Administration, DOT.

    ACTION:

    List of Applications for Modification of Exemption.

    SUMMARY:

    In accordance with the procedures governing the application for, and the processing of, exemptions from the Department of Transportation's Hazardous Material Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Request of modifications of exemptions (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix “M” denote a modification request. There applications have been separated from the new application for exemption to facilitate processing.

    DATES:

    Comments must be received on or before December 8, 2005.

    ADDRESSES:

    Record Center, Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, Washington, DC 20590.

    Comments should refer to the application number and be submitted in triplicate. If Confirmation of receipt of comments is desired, include a self-addressed stamped postcard showing the exemption number.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Copies of the applications are available for inspection in the Records Center, Nassif Building, 400 7th Street, SW., Washington, DC or at http://dms.dot.gov.

    This notice of receipt of applications for modification of exemption is published in accordance with part 107 of the Federal hazardous materials transportation law (49 U.S.C. 5117(b); 49 CFR 1.53(b)).

    Start Signature

    Issued in Washington, DC, on November 17, 2005.

    R. Ryan Posten,

    Chief, Special Permits Program, Office of Hazardous Materials Special Permits & Approvals.

    End Signature

    Modification Exemptions

    Application No.Docket No.ApplicantRegulation(s) affectedModification of exemptionNature of exemption thereof
    5206-MNelson Brothers, LLC Birmingham, AL49 CFR 173.3(a); 173.3(b); 173.24(c); 173.605206To modify the special permit to authorize the transportation of an additional Division 1.5D material in privately operated bulk hopper-type motor vehicles.
    7887-MEstes-Cox Corporation, d/b/a Estes Industries Penrose, CO49 CFR 172.101; 175.37887To modify the special permit to allow igniters, Division 1.4S, to be shipped in the same inner and outer packaging as model rocket motors and with nonhazardous materials needed to construct model rockets.
    10407-MThermo Measure Tech Sugar Land, TX49 CFR 173.302a(a); 175.310407To modify the special permit to authorize the use of an alternative radiation detector or ionization chamber for the transportation of Division 2.2 materials.
    10878-MTankcon FRP, Inc. Boisbriand, OC49 CFR 172.102(c)(3); 173.24210878To modify the special permit to waive the requirements for shipping papers to bear the DOT-SP number when transporting Class 8 materials in FRP cargo tanks.
    Start Printed Page 70918
    11646-MBarton Solvents, Inc. Des Moines, IA49 CFR 172.203(a); 172.301(c); 177.834(h)11646To modify the special permit to authorize the discharge of a Class 8 and an additional Class 3 material from a DOT Specification drum without removing the drum from the vehicle.
    12561-MRSPA-00-8305Rhodia Inc. Cranbury, NJ49 CFR 172.203(a); 173.31; 179.1312561To modify the special permit to authorize the use of 60 additional DOT Specification tank cars for the transportation of Class 8 materials.
    13182-MRSPA-02-14023Cytec Industries Inc. West Paterson, NJ49 CFR 173.192(a); 173.304a(b)13182To modify the special permit to authorize the maximum fill density to 45% for the DOT Specification and non-DOT specification cyliners transporting a Division 2.3 material.
    13245-MRSPA-03-15985Piper Metal Forming Corporation New Albany, MS49 CFR 173.302(a)(1); 175.313245To modify the special permit to authorize a new neck configuration design for the non-refillable, non-DOT specification cylinders transporting Division 2.2 materials.
    13481-MOnyx Environmental Services, L.L.C. Ledgewood, NJ49 CFR 172.320; 173.54(a), (e) and (j); 173.56(b); 173.57; 173.58; 173.60; 173.6213481To modify the exemption to authorize the transportation of solid explosive substances in special shipping containers.
    13583-MRSPA-04-18507Structural Composites Industries Pomona, CA49 CFR 178.3513583To modify the special permit to authorize an alternative test method and extend the service life of each non-DOT specification composite cylinder for up to 30 years.
    13599-MRSPA-04-18712Air Products & Chemicals, Inc. Allentown, PA49 CFR 173.304a(a)(2)13599To modify the special permit to authorize an increase in fill densities/ratios for the DOT Specification seamless steel cylinders transporting a Division 2.2 material.
    13738-MRSPA-04-18889Department of Energy Washington, DC49 CFR 173.420(a)(4)13738To modify the special permit to provide relief from the marking requirements for shipment of cylinders with missing or illegible nameplates containing a Class 7 material.
    End Further Info End Preamble

    [FR Doc. 05-23170 Filed 11-23-05; 8:45 am]

    BILLING CODE 4909-60-M

Document Information

Published:
11/23/2005
Department:
Pipeline and Hazardous Materials Safety Administration
Entry Type:
Notice
Action:
List of Applications for Modification of Exemption.
Document Number:
05-23170
Dates:
Comments must be received on or before December 8, 2005.
Pages:
70917-70918 (2 pages)
PDF File:
05-23170.pdf